Solvothermal synthesis of CdIn2S4 photocatalyst for selective photosynthesis of organic aromatic compounds under visible light

Defect-mediated Fermi level modulation boosting photo-activity of spatially-ordered S-scheme heterojunction

Spatially-ordered S-scheme photocatalysts are intriguing due to their enhanced light harvesting, spatially isolated redox sites, and strong redox abilities. Nonetheless, heightening the performance of S-scheme photocatalysts via controllable defect engineering is still challenging to now. In this work, multi-armed MoSe2/CdS S-scheme heterojunction with intimate Mo-S bond coupling and adjustable Se vacancies (VSe) and Mo5+ concentrations was constructed, which consisted of few- or even single-layered MoSe2 growing on the {11-20} facets of wurtzite CdS arms. The S-scheme charge transmission mechanism of MoSe2/CdS heterojunction was validated by density functional theory calculation combined with in situ photo-irradiated X-ray photoelectron spectroscopy, surface photovoltage, and radical measurements. Moreover, the Fermi level gap between CdS and MoSe2 was enlarged by regulating the contents of donor (VSe) and acceptor (Mo5+) impurities with synthesis temperature, which strengthens the built-in electric field and carriers transfer driving force of MoSe2/CdS composites, contributing to an outstanding H2 evolution activity of 52.62 mmol·g-1·h-1 (corresponding to an apparent quantum efficiency of 34.8 % at 400 nm) under visible-light irradiation (λ > 400 nm), 25.8 times that of Pt-loaded CdS counterpart and a substantial amount of reported CdS-containing photocatalysts. Our study results are anticipated to facilitate the rational design of advanced semiconductor nanostructures for efficient solar conversion and utilization.

Efficient Visible Light Photocatalytic Hydrogen Evolution by Boosting the Interfacial Electron Transfer in Mesoporous Mott-Schottky Heterojunctions of Co2P-Modified CdIn2S4 Nanocrystals

Photocatalytic water splitting for hydrogen generation is an appealing means of sustainable solar energy storage. In the past few years, mesoporous semiconductors have been at the forefront of investigations in low-cost chemical fuel production and energy conversion technologies. Mesoporosity combined with the tunable electronic properties of semiconducting nanocrystals offers the desired large accessible surface and electronic connectivity throughout the framework, thus enhancing photocatalytic activity. In this work, we present the construction of rationally designed 3D mesoporous networks of Co2P-modified CdIn2S4 nanoscale crystals (ca. 5-6 nm in size) through an effective soft-templating synthetic route and demonstrate their impressive performance for visible-light-irradiated catalytic hydrogen production. Spectroscopic characterizations combined with electrochemical studies unravel the multipathway electron transfer dynamics across the interface of Co2P/CdIn2S4 Mott-Schottky nanoheterojunctions and shed light on their impact on the photocatalytic hydrogen evolution chemistry. The strong Mott-Schottky interaction occurring at the heterointerface can regulate the charge transport toward greatly improved hydrogen evolution performance. The hybrid catalyst with 10 wt % Co2P content unveils a H2 evolution rate of 20.9 mmol gcat -1 h-1 under visible light irradiation with an apparent quantum efficiency (AQE) up to 56.1% at 420 nm, which is among the highest reported activities. The understanding of interfacial charge-transfer mechanism could provide valuable insights into the rational development of highly efficient catalysts for clean energy applications.

Metal Sulfide S-Scheme Homojunction for Photocatalytic Selective Phenylcarbinol Oxidation

Metal sulfide-based homojunction photocatalysts are extensively explored with improved photocatalytic performance. However, the construction of metal sulfide-based S-scheme homojunction remains a challenge. Herein, the fabrication of 2D CdIn2S4 nanosheets coated 3D CdIn2S4 octahedra (referred to as 2D/3D n-CIS/o-CIS) S-scheme homojunction photocatalyst is reported by simply adjustment of polyvinyl pyrrolidone amount during the solvothermal synthesis. The formation of S-scheme homojunction within n-CIS/o-CIS is systematically investigated via a series of characterizations, which can generate an internal electric field to facilitate the separation and migration of photogenerated electron-hole pairs. The 2D/3D n-CIS/o-CIS composite exhibits significantly improved photocatalytic activity and stability in the selective oxidation of phenylcarbinol (PhCH2OH) to benzaldehyde (PhCHO) when compared to pure n-CIS and o-CIS samples under visible light irradiation. It is hoped that this work can contribute novel insights into the development of metal sulfides S-scheme homojunction photocatalysts for solar energy conversion.

Spatially ordered NiOOH-ZnS/CdS heterostructures with an efficient photo-carrier transmission channel for markedly improved H2 production

Spatially-ordered 1D nanocrystal-based semiconductor nanostructures possess distinct merits for photocatalytic reaction, including large surface area, fast carrier separation, and enhanced light scattering and absorption. Nevertheless, establishing a valid photo-carrier transmission channel is still crucial yet challenging for semiconductor heterostructures to realize efficient photocatalysis. In this work, spatially ordered NiOOH-ZnS/CdS heterostructures were constructed by sequential ZnS coating and NiOOH photo-deposition on multi-armed CdS, which consists of {112̄0}-faceted wurtzite nanorods grown epitaxially on {111}-faceted zinc blende core. Intriguingly, the surface photovoltage spectroscopy and PbO2 photo-deposition results suggest that the photogenerated holes of CdS were first transferred to the Zn-vacancy level of ZnS and then to NiOOH, as driven by the built-in electric field between ZnS and CdS and the hole-extracting effect of the NiOOH cocatalyst, leading to the efficient charge separation of NiOOH-ZnS/CdS. With visible-light (λ > 420 nm) irradiation, NiOOH-ZnS/CdS exhibited a distinguished H2-evolution rate of 152.20 mmol g-1 h-1 (apparent quantum efficiency of 40.9% at 420 nm), approximately 18 folds that of 3 wt% Pt-loaded CdS and much higher than that of ZnS/CdS and NiOOH-CdS counterparts as well as the most reported CdS-containing photocatalysts. Moreover, the cycling and long-term H2 generation tests manifested the outstanding photocatalyst stability of NiOOH-ZnS/CdS. The study results presented here may propel the controllable design of highly-active nanomaterials for solar conversion and utilization.

The Mars-Van Krevelen cycle and non-noble metal Ni jointly promoting Z-scheme charge transfer: a study on the photothermal synergy effect applied in selectively oxidizing aromatic alcohols

Photothermal catalysis is a promising method for selectively oxidizing organic compounds, effectively addressing the energy-intensive and low-selective processes of thermal catalysis, as well as the slow reaction rates of photocatalysis. In this study, a ternary photothermal catalyst, Ni/CeO2/CdS, was synthesized using a simple calcination and solvothermal method. The catalyst demonstrated remarkable improvement in reaction rates and achieved nearly 100% selectivity in converting benzyl alcohol to benzaldehyde through photothermal catalysis at normal pressure. The reaction rates were 5.9 times and 63 times higher than those of CdS and Ni/CeO2 individually. XPS analysis confirmed that the thermal catalysis followed the Mars-Van Krevelen (MVK) mechanism and also proved that photocatalysis facilitated the MVK cycle. Additionally, DFT calculations showed that Ni acted as an electron transfer channel, facilitating efficient Z-scheme charge transfer. The in situ infrared technique was used to dynamically monitor the reaction process and explain the high selectivity of the product. Furthermore, detailed explanations of photocatalysis, thermocatalysis, and photothermal synergistic catalysis were proposed based on the aforementioned characterization and theoretical calculations. This approach establishes a theoretical foundation for the development of efficient photothermal catalysts.

Type-II Heterojunction CdIn2S4/BiVO4 Coupling with CQDs to Improve PEC Water Splitting Performance Synergistically

Bismuth vanadate (BiVO₄) has been considered as a promising photoelectrocatalytic (PEC) semiconductor, but suffers from severe hole recombination, attributed to the short hole-diffusion length and the low carrier mobility. Herein, a type-II heterojunction CdIn₂S₄/BiVO₄ is designed to improve the photocurrent density from 1.22 (pristine BiVO₄) to 2.68 mA cm^-2 at 1.23 V vs the reversible hydrogen electrode (RHE), accelerating the bulk separation of photogenerated carriers by the built-in field from the matched energy band. With the introduction of CQDs, CQDs/CdIn₂S₄/BiVO₄ increases the photocurrent density to 4.84 mA cm^-2, enhancing the light absorption and cathodically shifting its onset potential, due to the synergetic effect of the heterojunction and CQDs. Compared with BiVO₄, CQDs/CdIn₂S₄/BiVO₄ promotes the bulk separation efficiency to 94.6% and the surface injection efficiency to 72.2%. Additionally, spin-coating of FeOOH on CQDs/CdIn₂S₄/BiVO₄ could further improve the PEC performance and keep a long stability for water splitting. The density function theory (DFT) calculations illustrated that the type-II heterojunction CdIn₂S₄/BiVO₄ could decrease the oxygen evolution reaction (OER) overpotential and accelerate bulk charge separation for the built-in field of the aligned band structure.

Novel Ultrasensitive Photoelectrochemical Cytosensor Based on Hollow CdIn2S4/In2S3 Heterostructured Microspheres for HepG2 Cells Detection and Inhibitor Screening

Hepatocellular carcinoma is a life-threatening malignant tumor found around the world for its high morbidity and mortality. Therefore, it is of great importance for sensitive analysis of liver cancer cells (HepG2 cells) in clinical diagnosis and biomedical research. To fulfill this demand, hollow CdIn₂S₄/In₂S₃ heterostructured microspheres (termed CdIn₂S₄/In₂S₃ for clarity) were prepared by a two-step hydrothermal strategy and applied for building a novel photoelectrochemical (PEC) cytosensor for ultrasensitive and accurate detection of HepG2 cells through specific recognition of CD133 protein on the cell surface with the respective aptamer. The optical properties of CdIn₂S₄/In₂S₃ were investigated by UV-vis diffuse reflectance spectroscopy (DRS) and PEC technology. By virtue of their appealing PEC characteristics, the resultant PEC sensor exhibited a wider dynamic linear range from 1 × 10² to 2 × 10⁵ cells mL^-1 with a lower limit of detection (LOD, 23 cells mL^-1), combined by evaluating the expression level of CD133 protein stimulated by metformin as a benchmarked inhibitor. This work opens a valuable and feasible avenue for sensitive detection of diverse tumor cells, holding great potential in early clinical diagnosis and treatment coupled by screening inhibitors.

Photocatalytic Anaerobic Dehydrogenation of Alcohols over Metal Halide Perovskites: A New Acid-Free Scheme for H2 Production

Photocatalytic H₂ evolution from haloid acid (HX) solution by metal halide perovskites (MHPs) has been intensively investigated; however, the corrosive acid solution severely restricts its practical operability. Therefore, developing acid-free schemes for H₂ evolution using MHPs is highly desired. Here, we investigate the photocatalytic anaerobic dehydrogenation of alcohols over a series of MHPs (APbX₃, A = Cs⁺, CH₃NH₃⁺ (MA), CH(NH₂)₂⁺ (FA); X = Cl^-, Br^-, I^-) to simultaneously produce H₂ and aldehydes. Via the coassembly of Pt and rGO nanosheets on MAPbBr₃ microcrystals, the optimal MAPbBr₃/rGO-Pt reaches a H₂ evolution rate of 3150 μmol g^-1 h^-1 under visible light irradiation (780 nm ≥ λ ≥ 400 nm), which is more than 105-fold higher than pure MAPbBr₃ (30 μmol g^-1 h^-1). The present work not only brings new ample opportunities toward photocatalytic H₂ evolution but also opens up new avenues for more effective utilization of MHPs in photocatalysis.

Ultrathin Two-Dimensional ZnIn2S4/Nix-B Heterostructure for High-Performance Photocatalytic Fine Chemical Synthesis and H2 Generation

Photocatalytic H₂ evolution coupled with organic transformation provides a new avenue to cooperatively produce clean fuels and fine chemicals, enabling a more efficient conversion of solar energy. Here, a novel two-dimensional (2D) heterostructure of ultrathin ZnIn₂S₄ nanosheets decorated with amorphous nickel boride (Ni_x-B) is prepared for simultaneous photocatalytic anaerobic H₂ generation and aromatic aldehydes production. This ZnIn₂S₄/Ni_x-B catalyst elaborately combines the ultrathin structure advantage of the ZnIn₂S₄ semiconductor and the cocatalytic function of Ni_x-B. A high H₂ production rate of 8.9 mmol h^-1 g^-1 is delivered over the optimal ZnIn₂S₄/Ni_x-B with a stoichiometric production of benzaldehyde, which is about 22 times higher than ZnIn₂S₄. Especially, the H₂ evolution rate is much higher than the value (2.8 mmol h^-1 g^-1) of the traditional photocatalytic half reaction of H₂ production with triethanolamine as a sacrificial agent. The apparent quantum yield reaches 24% at 420 nm, representing an advanced photocatalyst system. Moreover, compared with traditional sulfide, hydroxide, and even noble metal modified ZnIn₂S₄/M counterparts (M = NiS, Ni(OH)₂, Pt), the ZnIn₂S₄/Ni_x-B also maintains markedly higher photocatalytic activity, showing a highly efficient and economical advantage of the Ni_x-B cocatalyst. This work sheds light on the exploration of 2D ultrathin semiconductors decorated with novel transition metal boride cocatalyst for efficient photocatalytic organic transformation integrated with solar fuel production.

Morphology-engineered carbon quantum dots embedded on octahedral CdIn2S4 for enhanced photocatalytic activity towards pollutant degradation and hydrogen evolution

In recent years, carbon quantum dots (CQDs) and CdIn₂S₄ have considered as the representatives of the most potential photocatalysts applied in the field of photocatalysis for efficiently solving energy shortage and environmental pollution. In this work, a novel CQDs hybridized CdIn₂S₄ (CQDs/CIS) heterostructure with 2D nanosheet/3D nanooctahedra morphology was successfully fabricated by a simple in-situ solvothermal method. Most interestingly, the morphology of hybrid gradually evolved from 3D octahedron to 2D nanosheet with the increase of CQDs. This unique 2D/3D structure and synergistic effect between CQDs and CdIn₂S₄ increased the multi-dimensional active reaction sites and enhanced the quantum yield and the separation efficiency of photogenerated electron pairs. Therefore, CQDs/CIS hybrids showed excellent photocatalytic activities of H₂ generation, RhB and TCH degradation. Especially, CQDs/CIS-3 heterostructure presented the highest photocatalytic efficiency and its hydrogen generation activity (956.79 μmol g^-1 h^-1) was 7.57-fold improvement by contrast with pure CdIn₂S₄ (126.35 μmol g^-1 h^-1). Moreover, RhB and TCH degradation rate constants of CQDs/CIS-3 were about 8.14 and 2.32 times higher than those of CdIn₂S_4, respectively. Furthermore, the effect of CQDs on the evolution of heterostructure morphology and photocatalytic mechanism were also proposed. This research work would offer useful enlightenment for elucidating the affect of CQDs on the morphology evolution and construction of CQDs-based hybrid with excellent performances for H₂ production and pollutant removal.

Fabrication of a ternary NiS/ZnIn2S4/g-C3N4 photocatalyst with dual charge transfer channels towards efficient H2 evolution

As a renewable green energy, hydrogen has received widespread attention due to its huge potential in solving energy shortages and environment pollution. In this paper, a one-step solvothermal method was applied to grow ultra-thin g-C₃N₄ (UCN) nanosheets and NiS nanoparticles on the surface of ZnIn₂S₄ (ZIS). A ternary NiS/ZnIn₂S₄/ultra-thin-g-C₃N₄ composite material with dual high-speed charge transfer channels was constructed for the advancement of the photocatalytic H₂ generation. The optimal ternary catalyst 1.5wt.%NiS/ZnIn₂S₄/ultra-thin-g-C₃N₄ (NiS/ZIS/UCN) achieved a H₂ evolution yield reached to 5.02 mmolg^-1h^-1, which was 5.23 times superior than that of pristine ZnIn₂S₄ (0.96 mmolg^-1h^-1) and even outperform than that of the best precious metal modified 3.0 wt%Pt/ZnIn₂S₄ (4.08 mmolg^-1h^-1). The AQY at 420 nm could be achieved as high as 30.5%. The increased photocatalytic performance of NiS/ZIS/UCN could be ascribed to the type-I heterojunctions between intimated ZIS and UCN. In addition, NiS co-catalyst with large quantity of H₂ evolution sites, could result in efficient photo-induced charges separation and migration. Furthermore, the NiS/ZIS/UCN composite exhibited excellent H₂ evolution stability and recyclability. This work would also offer a reference for the design and synthesis of ternary co-catalyst with heterojunction composite for green energy conversion.

Porous direct Z-scheme heterostructures of S-deficient CoS/CdS hexagonal nanoplates for robust photocatalytic H2 generation

Unique porous S-deficient CoS/CdS hexagonal nanoplates exhibited an outstanding photocatalytic capability for H2 production, due to excellent visible-light response, efficient Z-scheme charge separation, and abundant H2-evolving active sites.

Robust visible-light photocatalytic H2 evolution on 2D RGO/Cd0.15Zn0.85In2S4–Ni2P hierarchitectures

Unique 2D ternary hierarchitectures constructed from reduced graphene oxide nanosheets grown with ultrathin Cd0.15Zn0.85In2S4 nanosheets and Ni2P nanoparticles exhibited an outstanding capability for visible-light photocatalytic H2 production.

In situ construction of a direct Z-scheme CdIn2S4/TiO2 heterojunction for improving photocatalytic properties

Direct Z-scheme photocatalytic systems driven by visible light to eliminate organic pollutants in wastewater have become important scientific tools in the field of photocatalysis.

Highly efficient conversion of the nitroarenes to amines at the interface of a ternary hybrid containing silver nanoparticles doped reduced graphene oxide/ graphitic carbon nitride under visible light

In this report, a ternary Ag-rGO/g-C₃N₄ hybrid was synthesized by a simple hydrothermal approach for the photocatalytic reduction of nitroarene compounds into their corresponding amines under visible light. Importantly, the present method did not require reducing agents, like hydrazine hydrate; instead methanol has been used as a source of electrons and protons for the photoreduction process. After grafting of Ag NPs, a significant enhancement in the efficiency of the rGO/g-C₃N₄ for the reduction of nitrobenzenes was observed. Under optimized experimental conditions, the conversion of nitrobenzene and yield of aniline were determined to be 99% and 98%, respectively under visible light illumination for 4 h. The nitrobenzene compounds bearing both electron donating and withdrawing groups were selectively converted into their corresponding aniline products without altering the functionality. The enhanced performance of the developed photocatalyst attributed to the effective separation of photoexcited electrons on the photocatalyst surface and their subsequent transfer for the reduction of nitrobenzene molecules.

Self-Assembly of CdS/CdIn2S4 Heterostructure with Enhanced Photocascade Synthesis of Schiff Base Compounds in an Aromatic Alcohols and Nitrobenzene System with Visible Light

A series of novel CdS/CdIn₂S₄ composite materials were prepared via a one-pot solvothermal process. The as-obtained photocatalysts were characterized by several techniques and the photocatalytic properties of CdS/CdIn₂S₄ photocatalysts were studied by photocascade synthesis of Schiff base compounds in a photocatalytic reaction system of aromatic alcohols and nitrobenzene irradiated with visible light. The results reveal that the resulting CdS/CdIn₂S₄ heterostructure samples show outstanding photocatalytic activities toward the photocascade production of Schiff base compounds in an aromatic alcohols and nitrobenzene reaction system irradiated with visible light. An optimized 50.0% CdS/CdIn₂S₄ heterostructure sample shows the highest Schiff base yield of 42.0% irradiated with visible light for 4 h, which is approximately 19.1 and 1.54 times higher than those of sole CdS and CdIn₂S₄ samples, respectively. The fabrication of heterogeneous structure improves the spatial separation and migration of photoinduced electron-hole pairs, thus contributing to the enhancement of photocatalytic properties. We foresee that this finding can offer a strategy to develop heterostructure composites for efficient synthesis of organics by photocatalysis under mild conditions.

Designing WO3/CdIn2S4 type-II heterojunction with both efficient light absorption and charge separation for enhanced photoelectrochemical water splitting

WO₃ is a typical photoanode material for photoelectrochemical (PEC) water splitting. However, the PEC activity of WO₃ photoanode is limited by its poor visible light absorption as well as severe carrier recombination at the electrode/electrolyte interface. Herein, we integrate small-band-gap CdIn₂S₄ nanoplates with hydrothermally grown WO₃ nanowall arrays to form into a three-dimensional (3D) WO₃/CdIn₂S₄ heterojunction through a chemical bath deposition process. The synthesis parameters of CdIn₂S₄, including reaction time and temperature, have been tuned to optimize the PEC performance. The WO₃/CdIn₂S₄ composite photoanode prepared at 50 °C for 5 h exhibits the highest photocurrent of 1.06 mA cm^-2 at 1.23 V versus reversible hydrogen electrode without the presence of holes scavenger, which is about 5.9 times higher than that of bare WO₃ photoanode. The band alignment between WO₃ and CdIn₂S₄ is confirmed by the ultraviolet-visible light absorption spectra and ultraviolet photoelectron spectra. The PEC performance enhancement is attributed to the enhanced light absorption benefiting from the small band gap of CdIn₂S₄ and efficient charge separation originating from the type-II alignment between WO₃ and CdIn₂S₄.

Synthesis of novel C-doped g-C3N4 nanosheets coupled with CdIn2S4 for enhanced photocatalytic hydrogen evolution

Photocatalytic hydrogen generation from water splitting has become a favorable route for the utilization of solar energy. An effective strategy, the combination of C-doping with nanocomposite semiconductors, is presented in this work. C-doped g-C₃N₄ (CCN) was prepared by supramolecular self-assembly and subsequently a number of CdIn₂S₄/CCN composite photocatalysts were designed and fabricated though in situ decoration of CdIn₂S₄ crystals on the surface of CCN nanosheets via a hydrothermal method. This unique architecture was able to efficiently promote the transfer and separation of photon-generated charges, enhance light absorption, and significantly increase photocatalytic H₂ production. Detailed characterization was performed to analyze the crystal structure, morphology, elementary composition, optical properties and catalytic mechanism. The CdIn₂S₄/CCN nanocomposites with optimal CdIn₂S₄ content exhibited a maximum H₂ production rate of 2985 μmol h^-1 g^-1, almost 15 times more than that obtained using pure g-C₃N₄ (205 μmol h^-1 g^-1). In addition, the hybrid photocatalysts display good recycling stability under visible-light irradiation. This research may provide promising information for the preparation of more efficient multifunctional hybrid photocatalysts with excellent stability in fine chemical engineering.

Efficient utilization of photogenerated electrons and holes for photocatalytic redox reactions using visible light-driven Au/ZnIn2S4 hybrid

In this study, a new photocatalytic reaction system for simultaneous selective oxidation of aromatic alcohols to corresponding aldehydes and reduction of protons to H₂ has been developed. The results reveal that compared with pure ZnIn₂S₄, the ZnIn₂S₄ photocatalysts modified with noble metal gold (Au/ZnIn₂S₄) significantly promote the photocatalytic performance. Among them, the 0.5% Au/ZnIn₂S₄ nanosheets shows the highest photocatalytic activity for selective oxidation of benzyl alcohol to benzaldehyde and hydrogen production, and the yields of H₂ and benzaldehyde are 326.68 and 352.04 μmol under visible light irradiation for 4 h, respectively. Those are about 4.4 and 3.6 times higher than those of pure ZnIn₂S₄ sample (74.0 μmol H₂ and 98.04 μmol benzaldehyde), respectively. The utilization ratio of photogenerated electrons to holes can achieve 92.8%. Additionally, the control experiments demonstrate that the photogenerated electrons and holes play significant roles during the reaction process. It is hoped that the current work can offer an avenue to utilize the photogenerated carriers more efficiently and to develop other photocatalytic reaction systems, such as nitrogen fixation and reduction of carbon dioxide.

Influence of Au/Pd alloy on an amine functionalised ZnCr LDH–MCM-41 nanocomposite: A visible light sensitive photocatalyst towards one-pot imine synthesis

Au/Pd loaded amine functionalised ZnCr LDH–MCM-41 photocatalyst for one-pot imine synthesis.

Ultra-low content of Pt modified CdS nanorods: Preparation, characterization, and application for photocatalytic selective oxidation of aromatic alcohols and reduction of nitroarenes in one reaction system

A series of Pt nanoparticles (with size of 3-4 nm) decorated CdS nanorods were prepared via a simple solvothermal method. The samples were then used for photocatalytic selective oxidation (SO) of aromatic alcohols and reduction (SR) of nitroarenes in one reaction system. The platinized samples showed enhanced activity for the conversions than pristine CdS as Pt can serve as e^- trapping and reaction sites, by which the recombination of photoinduced charge carriers can be suppressed and the adsorption of reactants and the SR of nitroarenes can be promoted. The sample loaded with only of 0.03% Pt showed the highest performance and, after irradiation for 4 h, the conversions of p-methoxybenzyl alcohol and nitrobenzene are as high as 92.7% and 94.8%, while the yields of p-methoxybenzaldehyde and aniline are 80.5% and 36.0%. The activities are about 2.0 times higher than that of CdS. The coupling reaction mechanism for the SO of aromatic alcohols to aldehydes and SR of nitroarenes to anilines in the reaction system was finally proposed.

Crystal Chemistry, Optical-Electronic Properties, and Electronic Structure of Cd1- xIn2+2 x/3S4 Compounds (0 ≤ x ≤ 1), Potential Buffer in CIGS-Based Thin-Film Solar Cells

CdIn₂S₄ and In₂S₃ compounds were both previously studied as buffer layers in CIGS-based thin-film solar cells, each of them exhibiting advantages and disadvantages. Thus, we naturally embarked on the study of the CdIn₂S₄-In₂S₃ system, and a series of Cd_{1- x}In_{2+2 x/3}S₄ (0 ≤ x ≤ 1) materials were prepared and characterized. Our results show that two solid solutions exist. The aliovalent substitution of cadmium(II) by indium(III) induces a structural transition at x ≈ 0.7 from cubic spinel Fd3̅ m to tetragonal spinel I4₁/ amd that is related to an ordering of cadmium vacancies. Despite this transition, the variation of optical gap is continuous and decreases from 2.34 to 2.11 eV going from CdIn₂S₄ to In₂S₃ while all compounds retain an n-type behavior. In contrast with the Al _xIn_2-xS₃ solid solution, no saturation of the gap is observed. Moreover, XPS analyses indicate a difference between surface and volume composition of the grains for Cd-poor compounds. The use of Cd_{1- x}In_{2+2 x/3}S₄ compounds could be a good alternative to CdIn₂S₄ and In₂S₃ to improve CIGS/buffer interfaces with a compromise between photovoltaic conversion efficiency and cadmium content.

One-pot synthesis of Schiff base compounds via photocatalytic reaction in the coupled system of aromatic alcohols and nitrobenzene using CdIn2S4 photocatalyst

The use of solar energy to drive organic reactions under mild conditions provides a sustainable pathway for green synthesis and has been one of the primary goals pursued by scientists. In this research, the cadmium indium sulfide (CdIn2S4) photocatalyst was prepared using a simple solvothermal method and was thoroughly characterized using X-ray powder diffraction, UV-visible absorption spectra, nitrogen adsorption-desorption isotherms, scanning electron microscopy, transmission electron microscopy and X-ray spectroscopy measurements. The photocatalytic performance of the CdIn2S4 photocatalyst was evaluated using photocatalytic synthesis of Schiff base compounds in a coupled system of aromatic alcohols and nitrobenzene under visible light irradiation. The yield of N-benzylideneaniline reached up to 32% in the coupled system of benzyl alcohol and nitrobenzene under visible light illumination for 8 h. Furthermore, the changes for the amounts of aromatic aldehydes and AL as intermediate products during the photocatalytic process were also investigated. Using isotopic tracing, a possible reaction mechanism for the photocatalytic synthesis of N-benzylideneaniline and the redox reactions in the coupled system of benzyl alcohol and nitrobenzene was proposed. It is hoped that this strategy can provide an effective pathway for the traditional organic synthesis and transformation using photocatalytic technology under mild conditions.

Ni supported CdIn2S4 spongy-like spheres: a noble metal free high-performance sunlight driven photocatalyst for hydrogen production

We have reported a strategy to develop a high performance photocatalyst based on noble metal free Ni supported CdIn₂S₄ spongy-like spheres for hydrogen evolution under solar light.