Ultrashort vortex from a Gaussian pulse - An achromatic-interferometric approach

Toward high-energy few-cycle optical vortices with minimized topological charge dispersion

A simple approach to generate high-energy few-cycle optical vortices with minimized topological charge dispersion is introduced. By means of numerical simulations, it is shown that, by leveraging the intrinsic properties of optical parametric chirped pulse amplification (OPCPA), clean transfer of topological charge from a high-energy narrowband pump pulse to a broadband idler is feasible under certain particular conditions, enabling the generation of high-energy few-cycle vortex pulses with extremely low topological charge dispersion.

Few-cycle optical vortices for strong-field physics

We report on the generation of optical vortices with few-cycle pulse durations, 500μJ per pulse, at a repetition rate of 1 kHz. To do so, a 25 fs laser beam at 800 nm is shaped with a helical phase and coupled into a hollow-core fiber filled with argon gas, in which it undergoes self-phase modulation. Then, 5.5 fs long pulses are measured at the output of the fiber using a dispersion-scan setup. To retrieve the spectrally resolved spatial profile and orbital angular momentum (OAM) content of the pulse, we introduce a method based on spatially resolved Fourier-transform spectroscopy. We find that the input OAM is transferred to all frequency components of the post-compressed pulse. The combination of these two information shows that we obtain few-cycle, high-intensity vortex beams with a well-defined OAM, and sufficient energy to drive strong-field processes.

Wavefront control of subcycle vortex pulses via carrier-envelope-phase tailoring

The carrier-envelope phase (CEP) of an ultrashort laser pulse is becoming more crucial to specify the temporal characteristic of the pulse's electric field when the pulse duration becomes shorter and attains the subcycle regime; here, the pulse duration of the intensity envelope is shorter than one cycle period of the carrier field oscillation. When this subcycle pulse involves a structured wavefront as is contained in an optical vortex (OV) pulse, the CEP has an impact on not only the temporal but also the spatial characteristics owing to the spatiotemporal coupling in the structured optical pulse. However, the direct observation of the spatial effect of the CEP control has not yet been demonstrated. In this study, we report on the measurement and control of the spatial wavefront of a subcycle OV pulse by adjusting the CEP. To generate subcycle OV pulses, an optical parametric amplifier delivering subcycle Gaussian pulses and a Sagnac interferometer as a mode converter were integrated and provided an adequate spectral adaptability. The pulse duration of the generated OV pulse was 4.7 fs at a carrier wavelength of 1.54 µm. To confirm the wavefront control with the alteration of the CEP, we developed a novel [Formula: see text]-2[Formula: see text] interferometer that exhibited spiral fringes originating from the spatial interference between the subcycle OV pulse and the second harmonic of the subcycle Gaussian pulse producing a parabolic wavefront as a reference; this resulted in the successful observation of the rotation of spiral interference fringes during CEP manipulation.

Ultrafast vortex arrays generated from a mode-locked oscillator with dispersion management

Herein, we demonstrate the generation of optical vortex arrays pulses using a Sagnac common-path interferometric vortex generator. Hermite-Gaussian (HG) modes with different orders are initially obtained from a SESAM mode-locked laser in the positive dispersion regime. Then, in the interferometric vortex generator, by controlling the phase difference and sheering displacement between two HG modes, optical vortex pulses with different numbers of phase singularities are generated through superposition. The generated HG10 mode has a pulse width of 2 ps and maximum energy of 0.75 nJ. One-dimensional vortex arrays and triangular vortex arrays are also generated, which are formed by HGm0 and HG0n modes, respectively. This work has potential applications in the massive manipulation of microparticles, optical communication, and so on.

Wave dislocation line threaded polarization interferometer

Constructing a closed-circuit polarization interferometer, wherein a wave dislocation line can be visualized to thread the parameter space, is a topic of fundamental and applied research interest. Proposed by Berry [Proc. R. Soc. A463, 1697 (2007)10.1098/rspa.2007.1842] in the scalar wave domain, this universal phenomenon is simulated and experimentally demonstrated in the vector domain using a rotated-tilted quartz crystal plate in a polarization interferometer. The phase difference between overlapping ordinary and extraordinary paraxial ray beams passing through the crystal plate is varied continuously. The appearance of ±1 dislocation number spiral- and saddle-type topological structures in the complex Stokes phase is a result of satisfying ± π/2 phase difference between the ray beams and around the zero-crossings of the Stokes parameters.

>30 W vortex LG01 or HG10 laser using a mode transforming output coupler

High-power vortex light generated directly from lasers will help drive their applications in material processing, optical manipulation, levitation, particle acceleration, and communications, but limited power has been achieved to date. In this work, we demonstrate record vortex average power of 31.3 W directly from a laser, to the best of our knowledge, using an interferometric mode transforming output coupler to convert a fundamental mode Nd:YVO₄ laser into a LG₀₁ vortex output. The vortex laser was Q-switched with up to 600 kHz pulse rate with a high slope efficiency of 62.5% and an excellent LG₀₁ modal purity of 95.2%. We further demonstrate > 30W laser power in a high quality HG₁₀ mode by simple adjustment of the output coupler. Experimental investigations of varying output coupling transmission are compared with theory. This successful implementation of the interferometric output coupler in a high power system demonstrates the suitability of the mode transforming method for robust turn-key vortex lasers with high efficiency and high modal purity, with scalable power and pulse rate.

Controlling an optical vortex array from a vortex phase plate, mode converter, and spatial light modulator

In this Letter, we propose a convenient method of generating an optical vortex (OV) array, in which the size and quantity can be controlled by employing vortex phase plates, a mode converter, and a spatial light modulator into a simple optical system. Different sizes of OV arrays are generated from the superposition of crossed Hermite-Gaussian (HG) modes possessing equal or unequal orders and mutually orthogonal circular polarizations. We experimentally and theoretically demonstrate a series of vector superposed optical fields. Here the sizes of the OV arrays, as well as the quantities of OVs, are defined in terms of specific sets of HG bases. Our results indicate that a simple setup can be used to effectively generate and control OVs and OV arrays.

Vortex laser by transforming Gaussian mode with an interferometric output coupler

Generation of vortex beams directly from the laser source can be limited in power and efficiency, or to specific pump sources and gain media. Here, we propose a new high power and high efficiency vortex laser methodology with interferometric mode transformation as output coupling, which uses high power handling and low loss optics that have wavelength versatility. Experimental demonstration is made in a diode-pumped Nd:YVO₄ laser using an imbalanced Sagnac interferometer as output coupler producing high quality vortex output beams (M² = 2.07) with fully selectable control of handedness whilst the intracavity mode is maintained as a fundamental Gaussian. Vortex output power >3W is produced with only small reduction in efficiency compared to the equivalent TEM₀₀ laser. Continuous variation of vortex output coupling transmission and the quality of the vortex is investigated experimentally showing good agreement with theory. This work reveals a new approach to high power structured laser radiation direct from the source through interferometric spatial mode transformations.

Polarisation structuring of broadband light

Spatial structuring of the intensity, phase and polarisation of light is useful in a wide variety of modern applications, from microscopy to optical communications. This shaping is most commonly achieved using liquid crystal spatial light modulators (LC-SLMs). However, the inherent chromatic dispersion of LC-SLMs when used as diffractive elements presents a challenge to the extension of such techniques from monochromatic to broadband light. In this work we demonstrate a method of generating broadband vector beams with dynamically tunable intensity, phase and polarisation over a bandwidth of 100 nm. We use our system to generate radially and azimuthally polarised vector vortex beams carrying orbital angular momentum, and beams whose polarisation states span the majority of the Poincaré sphere. We characterise these broadband vector beams using spatially and spectrally resolved Stokes measurements, and detail the technical and fundamental limitations of our technique, including beam generation fidelity and efficiency. The broadband vector beam shaper that we demonstrate here may find use in applications such as ultrafast beam shaping and white light microscopy.