3D ultra-high resolution seismic imaging of shallow Solfatara crater in Campi Flegrei (Italy): New insights on deep hydrothermal fluid circulation processes

3D structure of the Campi Flegrei caldera central sector reconstructed through short-period magnetotelluric imaging

The Campi Flegrei caldera experienced an unrest phase dating to 2005, which primary expression is the impressive ground uplift, accompanied by increasing degassing and seismic activities. Such last two phenomena developed mainly in the caldera central sector, including the Solfatara-Pisciarelli complex. However, the inner structure of such an area is still not defined, and this originates a poor understanding of the ongoing unrest. This paper describes the results of a new magnetotelluric survey performed in the Campi Flegrei caldera central sector. Through the inversion of data collected in 47 independent soundings, a 3D model of the electrical resistivity has been retrieved, which evidenced a partition of the investigated structure. The Agnano-Astroni area seems to be associated with a liquid-dominated geothermal reservoir, whereas the Solfatara-Pisciarelli area seems to be characterized by a single mixed liquid and gasses-dominated geothermal reservoir, which supplies the main caldera fumaroles. The proposed reconstruction of the geometrical characteristics of the hydrothermal system and the primary fluid rising pathways gives substantial clues about the significance of the detected structures in the evolution of the caldera unrest.

4D Travel-Time Tomography as a Tool for Tracking Fluid-Driven Medium Changes in Offshore Oil–Gas Exploitation Areas

The monitoring of rock volume where offshore exploitation activities take place is crucial to assess the corresponding seismic hazard. Fluid injection/extraction operations generate a pore fluid pressure perturbation into the volume hosting the reservoir which, in turn, may trigger new failures and induce changes in the elastic properties of rocks. Our purpose is to evaluate the feasibility of reconstructing pore pressure perturbation diffusion in the host medium by imaging the 4D velocity changes using active seismic. We simulated repeated active offshore surveys and imaged the target volume. We constructed the velocity model perturbed by the fluid injection using physical modeling and evaluated under which conditions the repeated surveys could image the velocity changes. We found that the induced pressure perturbation causes seismic velocity variations ranging between 2–5% and 15–20%, depending on the different injection conditions and medium properties. So, in most cases, time-lapse tomography is very efficient in tracking the perturbation. The noise level characterizing the recording station sites is a crucial parameter. Since we evaluated the feasibility of the proposed 4D imaging strategy under different realistic environmental and operational conditions, our results can be directly applied to set up and configure the acquisition layout of surveys aimed at retrieving fluid-induced medium changes in the hosting medium. Moreover, our results can be considered as a useful starting point to design the guidelines to monitor exploitation areas.

Deep Electrical Resistivity Tomography for a 3D picture of the most active sector of Campi Flegrei caldera

The central sector of the Campi Flegrei volcano, including the Solfatara maar and Pisciarelli fumarole field, is currently the most active area of the caldera as regards seismicity and gaseous emissions and it plays a significant role in the ongoing unrest. However, a general volcano-tectonic reconstruction of the entire sector is still missing. This work aims to depict, for the first time, the architecture of the area through the application of deep Electrical Resistivity Tomography. We reconstructed a three-dimensional resistivity model for the entire sector. Results provide useful elements to understand the present state of the system and the possible evolution of the volcanic activity and shed solid bases for any attempt to develop physical-mathematical models investigating the ongoing phenomena.

Impacts of environmental complexity on respiratory and gut microbiome community structure and diversity in growing pigs

The limited understanding of the interaction between rearing environment of the growing pig and the pig’s microbial community impedes efforts to identify the optimal housing system to maximize animal health and production. Accordingly, we characterized the impact of housing complexity on shaping the respiratory and gut microbiota of growing pig. A total of 175 weaned pigs from 25 litters were randomly assigned within liter to either simple slatted-floor (S) or complex straw-based rearing ecosystem (C). Beside the floor swabs samples, fecal swabs and mucosal scraping samples from bronchus, ileum, and colon were collected approximately 164 days post-weaning at the time of slaughter. The S ecosystem seems to increase the α-diversity of respiratory and gut microbiota. Moreover, the C-raised pigs showed 35.4, 89.2, and 60.0% reduction in the Firmicutes/Bacteroidetes ratio than the S-raised pigs at bronchus, ileum, and colon, respectively. The unfavorable taxa Psychrobacter, Corynebacterium, Actinobacteria, and Neisseria were the signature taxa of C environment-associated microbial community. Therefore, the microbiota of S-raised pigs seems to show higher density of the most essential and beneficial taxa than the C-raised pigs. We preliminarily conclude that increasing the physical complexity of rearing environment seems to provide suboptimal conditions for establishing a healthy microbial community in the growing pigs.

Carbon isotopic signature of interstitial soil gases reveals the potential role of ecosystems in mitigating geogenic greenhouse gas emissions: Case studies from hydrothermal systems in Italy

Volcanic and hydrothermal areas largely contribute to the natural emission of greenhouse gases to the atmosphere, although large uncertainties in estimating their global output still remain. Nevertheless, CO₂ and CH₄ discharged from hydrothermal fluid reservoirs may support active soil microbial communities. Such secondary processes can control and reduce the flux of these gases to the atmosphere. In order to evaluate the effects deriving from the presence of microbial activity, chemical and carbon (in CO₂ and CH₄) isotopic composition of interstitial soil gases, as well as diffuse CO₂ fluxes, of three hydrothermal systems from Italy were investigated, i.e. (i) Solfatara crater (Campi Flegrei), (ii) Monterotondo Marittimo (Larderello geothermal field) and (iii) Baia di Levante in Vulcano Island (Aeolian Archipelago), where soil CO₂ fluxes up to 2400, 1920 and 346 g m^-2 day^-1 were measured, respectively. Despite the large supply of hydrothermal fluids, ¹³CO₂ enrichments were observed in interstitial soil gases with respect to the fumarolic gas discharges, pointing to the occurrence of autotrophic CO₂ fixation processes during the migration of deep-sourced fluids towards the soil-air interface. On the other hand, (i) the δ¹³C-CH₄ values (up to ~48‰ vs. V-PDB higher than those measured at the fumarolic emissions) of the interstitial soil gases and (ii) the comparison of the CO₂/CH₄ ratios between soil gases and fumarolic emissions suggested that the deep-sourced CH₄ was partly consumed by methanotrophic activity, as supported by isotope fractionation modeling. These findings confirmed the key role that methanotrophs play in mitigating the release of geogenic greenhouse gases from volcanic and hydrothermal environments.

Caldera unrest driven by CO2-induced drying of the deep hydrothermal system

Interpreting volcanic unrest is a highly challenging and non-unique problem at calderas, since large hydrothermal systems may either hide or amplify the dynamics of buried magma(s). Here we use the exceptional ground displacement and geochemical datasets from the actively degassing Campi Flegrei caldera (Southern Italy) to show that ambiguities disappear when the thermal evolution of the deep hydrothermal system is accurately tracked. By using temperatures from the CO₂-CH₄ exchange of ¹³C and thermodynamic analysis of gas ascending in the crust, we demonstrate that after the last 1982–84 crisis the deep hydrothermal system evolved through supercritical conditions under the continuous isenthalpic inflow of hot CO₂-rich gases released from the deep (~8 km) magma reservoir of regional size. This resulted in the drying of the base of the hot hydrothermal system, no more buffered along the liquid-vapour equilibrium, and excludes any shallow arrival of new magma, whose abundant steam degassing due to decompression would have restored liquid-vapour equilibrium. The consequent CO₂-infiltration and progressive heating of the surrounding deforming rock volume cause the build-up of pore pressure in aquifers, and generate the striking temporal symmetry that characterizes the ongoing uplift and the post-1984 subsidence, both originated by the same but reversed deformation mechanism.

Anatomy of a fumarolic system inferred from a multiphysics approach

Fumaroles are a common manifestation of volcanic activity that are associated with large emissions of gases into the atmosphere. These gases originate from the magma, and they can provide indirect and unique insights into magmatic processes. Therefore, they are extensively used to monitor and forecast eruptive activity. During their ascent, the magmatic gases interact with the rock and hydrothermal fluids, which modify their geochemical compositions. These interactions can complicate our understanding of the real volcanic dynamics and remain poorly considered. Here, we present the first complete imagery of a fumarolic plumbing system using three-dimensional electrical resistivity tomography and new acoustic noise localization. We delineate a gas reservoir that feeds the fumaroles through distinct channels. Based on this geometry, a thermodynamic model reveals that near-surface mixing between gas and condensed steam explains the distinct geochemical compositions of fumaroles that originate from the same source. Such modeling of fluid interactions will allow for the simulation of dynamic processes of magmatic degassing, which is crucial to the monitoring of volcanic unrest.

The shallow structure of Solfatara Volcano, Italy, revealed by dense, wide-aperture seismic profiling

Two active-source, high-resolution seismic profiles were acquired in the Solfatara tuff cone in May and November 2014, with dense, wide-aperture arrays. Common Receiver Surface processing was crucial in improving signal-to-noise ratio and reflector continuity. These surveys provide, for the first time, high-resolution seismic images of the Solfatara crater, depicting a ~400 m deep asymmetrical crater filled by volcanoclastic sediments and rocks and carved within an overall non-reflective pre-eruptive basement showing features consistent with the emplacement of shallow intrusive bodies. Seismic reflection data were interpreted using the trace complex attributes and clearly display several steep and segmented collapse faults, generally having normal kinematics and dipping toward the crater centre. Fault/fracture planes are imaged as sudden amplitude drops that generate narrow low-similarity and high-dip attributes. Uprising fluids degassed by a magmatic source are the most probable cause of the small-scale amplitude reduction. Seismic data also support the interpretation of the shallow structure of the Solfatara crater as a maar. Our results provides a solid framework to constrain the near-surface geological interpretation of such a complex area, which improves our understanding of the temporal changes of the structure in relation with other geophysical and geochemical measurements.