Three-Dimensional Multi-Doped Porous Carbon/Graphene Derived from Sewage Sludge with Template-Assisted Fe-pillared Montmorillonite for Enhanced Oxygen Reduction Reaction

Radiation fabrication of hybrid activated carbon and functionalized terpolymer hydrogel for sorption of Eu(III) and Sm(III) ions

In this work, a hybrid composite of activated carbon (AC) functionalized with terpolymer hydrogel of polyvinyl alcohol/polyacrylamide/polyacrylic acid (PVA/PAAm/PAA) was prepared by γ-irradiation and used efficiently for sorption of Eu(III) and Sm(III) ions from aquatic solutions. Sewage sludge from the wastewater treatment plant was used to prepare AC, then activated by zinc chloride (ZnCl2) and thermal treatment at 550 °C. The modification of AC by functionalized terpolymer has successfully occurred mainly to limit its precipitation and to increase its adsorption capacity which allowed capable interaction with the metal ions. Different advanced techniques were used to investigate the structure and properties of (PVA/PAAm/PAA)/AC composite before and after the sorption process. Using 20 kGy is sufficient to get gel fraction of 87.5% and equilibrium swelling was 39.1 g/g. The (PVA/PAm/PAA)/AC composite hydrogel showed a pHpzc at pH ∼3. FTIR and EDS confirmed the successful integration of the functional groups and constituent elements of AC into terpolymer hydrogel components. XRD results confirmed the typical diffraction peaks of AC in the composite and the calculated average crystallite size was 167.4 nm. The SEM morphology of AC appeared as grains distributed well into the composite. The effect of synthesized AC, PVA/PAAm/PAA and (PVA/PAAm/PAA)/AC sorbents were tested to uptake of Eu(III) and Sm(III) ions. The highest uptake was noticed for (PVA/PAAm/PAA)/AC composite and it was selected for studying the parameters affecting the sorption process such as pH, shaking time, initial concentration, and adsorbent dosage. Results of the experimental data showed that Langmuir isotherm and Pseudo-second-order kinetic models fit well the sorption process of both Eu(III) and Sm(III) ions with maximum sorption capacities of 173.24 and 160.41 mg/g and uptake percentage of 82.3% and 83.4%, respectively at the optimum conditions of pH 4, 180 min, 100 mg/L metal concentration and 0.01 g adsorbent mass. The thermodynamic parameters indicated endothermic and spontaneous nature of the sorption process. Additionally, the as-prepared composite afford high selectivity and uptake capacity for Eu(III) and Sm(III) ions at pH 4 even in the presence of competing cations; Cd(II), Co(II), Sr(II) and Cs(I). The (PVA/PAAm/PAA)/AC composite was used efficiently as a unique and selective adsorbent for the sorption of Eu(III) and Sm(III) ions.

A review on fabricating functional materials by heavy metal-containing sludges

With the development of industry, sustainable use of natural resources has become a worldwide hot topic. Heavy metal-containing sludge (HMS) is a hazardous waste after wastewater treatment. At present, HMS is still treated by landfill or landfill after incineration. Considering the components, HMS usually contains various heavy metals and organic compounds, which is potentially used as a raw resource for catalyst production. This review thus concludes recent reports and developments in this field. First, basic technologies are summarized as component regulation, precursor formation, and structure transformations. Second, prepared materials are applied in various catalytic fields, such as gas purification, photocatalysis, electrocatalysis, and Fenton catalysis. During these processes, key factors are multi-metallic components, metal doping, temperature, and pH. They not only influence the formation of HMS-derived catalyst but also the catalytic activity. Furthermore, catalytic activities of HMS-derived catalysts are compared with those synthesized by pure reagents. An assessment and accounting are also supplied if raw resources are substituted by HMS. Finally, in order to apply HMS in a real application, more works must be devoted to the influence of trace metal doping on catalytic activities and stabilities. Besides, more pilot experiments are urgently necessary.

Bacteria-Derived Biological Carbon Building Robust Li-S Batteries

Lithium sulfur (Li-S) batteries are attracting increasing interest for high-density energy storage. However, the practical application is limited by the rapid capacity fading over repeated charge/discharge cycles which is largely attributed to the formation and shuttling of soluble polysulfide species. To address these issues, we develop a hierarchical structure composite with triple protection strategy via graphene, organic conductor PEDOT, and nitrogen and phosphorus codoped biological carbon to encapsulate sulfur species (GOC@NPBCS). This unique hierarchical structure can effectively immobilize the sulfur species while at the same time improve the electrical conductivity and ensure efficient lithium ion transport to enable excellent Li-S battery performance. In particular, the biological carbon derived from natural bacteria features inherent nitrogen and phosphorus codoping with a strong absorption to lithium polysulfides, which can greatly suppress the dissolution and shuttling of polysulfides that are responsible for rapid capacity fading. With these synergistic effects, the GOC@NPBCS cathode exhibits exceptionally stable cycling stability (an ultralow capacity fading rate of 0.045% per cycle during 1000 cycles at the current rate of 5 C), high specific capacity (1193.8 mAh g^-1 at 0.5 C based on sulfur weight), and excellent rate capability.

Hierarchical Heterostructures of Ultrasmall Fe2O3-Encapsulated MoS2/N-Graphene as an Effective Catalyst for Oxygen Reduction Reaction

In this study, a facile approach has been successfully applied to synthesize a hierarchical three-dimensional architecture of ultrasmall hematite nanoparticles homogeneously encapsulated in MoS₂/nitrogen-doped graphene nanosheets, as a novel non-Pt cathodic catalyst for oxygen reduction reaction in fuel cell applications. The intrinsic topological characteristics along with unique physicochemical properties allowed this catalyst to facilitate oxygen adsorption and sped up the reduction kinetics through fast heterogeneous decomposition of oxygen to final products. As a result, the catalyst exhibited outstanding catalytic performance with a high electron-transfer number of 3.91-3.96, which was comparable to that of the Pt/C product. Furthermore, its working stability with a retention of 96.1% after 30 000 s and excellent alcohol tolerance were found to be significantly better than those for the Pt/C product. This hybrid can be considered as a highly potential non-Pt catalyst for practical oxygen reduction reaction application in requirement of low cost, facile production, high catalytic behavior, and excellent stability.

Melamine formaldehyde–metal organic gel interpenetrating polymer network derived intrinsic Fe–N-doped porous graphitic carbon electrocatalysts for oxygen reduction reaction

Melamine formaldehyde metal organic gel interpenetrating networks for heteroporous Fe–N-doped carbon.