Nanopatterning of steel by one-step anodization for anti-adhesion of bacteria

Osseointegration Properties of Titanium Implants Treated by Nonthermal Atmospheric-Pressure Nitrogen Plasma

Pure titanium is used in dental implants owing to its excellent biocompatibility and physical properties. However, the aging of the material during storage is detrimental to the long-term stability of the implant after implantation. Therefore, in this study, we attempted to improve the surface properties and circumvent the negative effects of material aging on titanium implants by using a portable handheld nonthermal plasma device capable of piezoelectric direct discharge to treat pure titanium discs with nitrogen gas. We evaluated the osteogenic properties of the treated samples by surface morphology and elemental analyses, as well as in vitro and in vivo experiments. The results showed that nonthermal atmospheric-pressure nitrogen plasma can improve the hydrophilicity of pure titanium without damaging its surface morphology while introducing nitrogen-containing functional groups, thereby promoting cell attachment, proliferation, and osseointegration to some extent. Therefore, nitrogen plasma treatment may be a promising method for the rapid surface treatment of titanium implants.

Copper Surface Treatment Method with Antibacterial Performance Using "Super-Spread Wetting" Properties

In this work, a copper coating is developed on a carbon steel substrate by exploiting the superwetting properties of liquid copper. We characterize the surface morphology, chemical composition, roughness, wettability, ability to release a copper ion from surfaces, and antibacterial efficacy (against Escherichia coli and Staphylococcus aureus). The coating shows a dense microstructure and good adhesion, with thicknesses of approximately 20–40 µm. X-ray diffraction (XRD) analysis reveals that the coated surface structure is composed of Cu, Cu₂O, and CuO. The surface roughness and contact angle measurements suggest that the copper coating is rougher and more hydrophobic than the substrate. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) measurements reveal a dissolution of copper ions in chloride-containing environments. The antibacterial test shows that the copper coating achieves a 99.99% reduction of E. coli and S. aureus. This study suggests that the characteristics of the copper-coated surface, including the chemical composition, high surface roughness, good wettability, and ability for copper ion release, may result in surfaces with antibacterial properties.

[Research progress on the osseointegration of titanium implants promoted by cold atmospheric plasma]

The application of cold atmospheric plasma to titanium surface modification has recently become a research focus in the area of material modification. Previous studies found that cold atmospheric plasma can affect the colonization of bacteria and biological behaviors of osteoblasts by changing the surface characteristics of titanium in vitro. In vivo studies reveal that cold atmospheric plasma can promote the process of osseointegration of titanium implants. This review focuses on research on the effects of the surface modification of titanium implants with cold atmospheric plasma on osseointegration.

Initial Bacterial Adhesion Properties of Anodically Oxidized Ti6Al4V

This paper reports about the initial interaction of bacteria with anodically oxidized Ti6Al4V for the use as dental implant abutment surfaces. Ti6Al4V samples are anodically oxidized in hydrofluoric acid using different voltages. The resulting nanotopographies are characterized by atomic force microscopy, scanning electron microscopy and contact angle measurements. The topographies reach from micro-porous structures with small nanoporosities on top to fully hexagonally aligned nanotubes. For initial bacterial adhesion tests, Escherichia coli and Staphylococcus aureus are used. Samples are incubated for 2 h and afterwards non-adherent cells are washed off. The results of live/dead staining and cell counts are presented. Gram-negative and Gram-positive strains show different behavior in respect to total number of initially adherent cells on different micro/nanotopographies. The observed reduction of adhered microorganisms is mainly based on underlying microporous topographies.

Enhanced antibacterial properties and the cellular response of stainless steel through friction stir processing

Biofilm related bacterial infection is one of the primary causes of implant failure. Limiting bacterial adhesion and colonization of pathogenic bacteria is a challenging task in health care. Here, a highly simplistic processing technique for imparting antibacterial properties on a biomedical grade stainless steel is demonstrated. Low-temperature high strain-rate deformation achieved using submerged friction stir processing resulted in a nearly single phase ultra-fine grain structure. The processed stainless steel demonstrated improved antibacterial properties for both Gram-positive and Gram-negative bacteria, significantly impeding biofilm formation during the in vitro study. Also, the processed stainless steel showed better compatibility with human fibroblasts manifested through apparent cell spreading and proliferation. The substantial antibacterial properties of the processed steel are explained in terms of the favorable electronic characteristics of the metal-oxide and by using classical Derjaguin-Landau-Verwey-Overbeek (DLVO) and the extended DLVO (XDLVO) approach at the cell-substrate interface.

Nanopatterning and Bioprinting in Orthopedic Surgery

In part 1 of this article, the authors explore nanoscale modifications of the surfaces of biomaterials, which offer an exciting potential venue for the prevention of bacterial adhesion and growth. Despite advances in the design and manufacture of implants, infection remains an important and often devastating mode of failure. In part 2, additive technologies for tissue engineering, live cell printing (bioprinting), and tissue fabrication are briefly introduced. The similarities and differences between bioprinting and non-bio 3D-printing approaches and requirements are discussed, along with terminological definitions, current processes, requirements, and biomaterial and cell-type selection and sourcing.

Photocatalytic anti-bioadhesion and bacterial deactivation on nanostructured iron oxide films

Bacterial adhesion and biofilm formation on metals are a primary mechanism causing integrity degradation and failure of engineering structures. Photocatalytic iron oxide nano-films are effective for prevention of bioadhesion.