Promotion of the excited electron transfer over Ni- and Co -sulfide co-doped g-C3N4 photocatalyst (g-C3N4/NixCo1-xS2) for hydrogen Production under visible light irradiation

Fabrication of carbon-based materials derived from a cobalt-based organic framework for enhancing photocatalytic degradation of dyes

The pyrolysis of metal-organic frameworks (MOFs) has emerged as a promising route to synthesize carbon/metal oxide-based materials with diverse phase compositions, morphologies, sizes and surface areas. In this paper, 1,3,5-benzoic acid (BTC) and 2,4,6-tri(4-pyridinyl)-1-pyridine (TPP) were used as ligands to prepare a novel cobalt-based MOF (Co-MOF) which was used as a precursor to obtain five carbon-based materials at different temperatures (Co-C200/400/600/800/1000). Furthermore, five dyes were used as degradation targets to investigate the photocatalytic degradation performance of the title materials under UV light irradiation. Co-C1000 exhibited the best photocatalytic degradation performance for methyl orange (MO), and the degradation rate could reach 99.21%. The enhanced photocatalytic activity was attributed to narrower band-gaps and a synergistic effect originating from the well-aligned straddling band structures between Co/CoO/Co3O4 and C, also resulting in a faster interfacial charge transfer during the photocatalytic reaction. This study will aid in the development of photocatalysts generated from carbon-based materials via the pyrolysis transformation of MOFs, therefore greatly enhancing the photocatalytic performance.

One-step thermal polymerization synthesis of nitrogen-rich g-C3N4 nanosheets enhances photocatalytic redox activity

Graphitic carbon nitride (g-C₃N₄) has attracted enormous attention as a visible-light-responsive carbon-based semiconductor photocatalyst. However, fast charge recombination seriously limits its application. Therefore, it is urgent to modify the electronic structure of g-C₃N₄ to obtain excellent photocatalytic activity. Herein, we reported a one-step thermal polymerization synthesis of nitrogen-rich g-C₃N₄ nanosheets. Benefiting from the N self-doping and the ultrathin structure, the optimal CN-70 exhibits its excellent performance. A 6.7 times increased degradation rate of rhodamine B (K = 0.06274 min^-1), furthermore, the hydrogen evolution efficiency also reached 2326.24 μmol h^-1 g^-1 (λ > 420 nm). Based on a series of characterizations and DFT calculations, we demonstrated that the N self-doping g-C₃N₄ can significantly introduce midgap states between the valence band and conduction band, which is more conducive to the efficient separation of photogenerated carriers. Our work provides a facile and efficient method for self-atom doping into g-C₃N₄, providing a new pathway for efficient photocatalysts.

Prussian-Blue Analogue-Derived Hollow Structured Co3 S4 /CuS2 /NiS2 Nanocubes as an Advanced Battery-Type Electrode Material for High-Performance Hybrid Supercapacitors

The facile and cost-effective fabrication of hybrid nanostructures comprised of hollow mixed metallic chalcogenides has attracted growing interest in the development of high-performance energy storage devices. Herein, multi-component (nickel-cobalt-copper-sulfides/selenides (NCCS/NCCSe)) hollow nanocubes (HNCs) are prepared via a single-step sulfurization/selenization process. The NCCS material shows interior HNCs, and the NCCSe material exhibits slightly formed porous cubes. Both the prepared materials demonstrate higher charge storage performance than the precursor NCC NCs owing to the improved surface morphology and addition of sulfur and selenium ions. Particularly, the NCCS HNCs electrode reveals superior specific capacity (capacitance) (70.32 mAh g^-1 (666.20 F g^-1 ) at 5 mA cm^-2 ) along with excellent cycling stability of 108.6% even after 10 000 cycles. Interestingly, the electrode delivers a good rate capability of 83.5% at a high current density of 20 mA cm^-2 . The feasibility of the battery-type NCCS HNCs as a positive electrode is explored by constructing an aqueous electrochemical hybrid capacitor (AEHC). The AEHC exhibits maximum energy and power densities of 23.15 Wh kg^-1 and 7899.08 W kg^-1 , respectively. Remarkably, it demonstrates superior long-life cycling stability even after 10 000 cycles (120.6% retention). The suitability of AEHC for practical application is also tested by driving electronic devices.

Fe doped NiS nanosheet arrays grown on carbon fiber paper for a highly efficient electrocatalytic oxygen evolution reaction

Developing efficient and low-cost non-noble metal catalysts for the oxygen evolution reaction (OER) is important for hydrogen production through water electrolysis. Herein, Fe doped NiS nanosheets directly grown on conductive carbon fiber paper (Fe-NiS@CFP) were fabricated through a two-step hydrothermal process. The microstructure, interface and electronic states of the prepared sample were modulated by Fe doping, exhibiting small internal and interface charge-transfer resistance. Benefiting from these factors, Fe-NiS@CFP shows superior electrocatalytic performance with an overpotential of 275 mV at 100 mA cm^-2 and maintains the activity for at least 50 h as a working electrode for the OER. This work may provide insights into the design and fabrication of non-noble metal sulfide electrocatalysts.

Fabrication of tailored rod-shaped carbon nitride, g-C3N4, decorated with MoSe2 flowers for the catalytic reduction of nitrophenol, organic dye degradation and biocompatibility studies

A facile hydrothermal approach was used to synthesize a self-assembled tailored rod-shaped g-C3N4 anchored with molybdenum diselenide (MoSe2) flowers.

Nanomedicine: Photo-activated nanostructured titanium dioxide, as a promising anticancer agent

The multivariate condition of cancer disease has been approached in various ways, by the scientific community. Recent studies focus on individualized treatments, minimizing the undesirable consequences of the conventional methods, but the development of an alternative effective therapeutic scheme remains to be held. Nanomedicine could provide a solution, filling this gap, exploiting the unique properties of innovative nanostructured materials. Nanostructured titanium dioxide (TiO₂) has a variety of applications of daily routine and of advanced technology. Due to its biocompatibility, it has also a great number of biomedical applications. It is now clear that photo-excited TiO₂ nanoparticles, induce generation of pairs of electrons and holes which react with water and oxygen to yield reactive oxygen species (ROS) that have been proven to damage cancer cells, triggering controlled cellular processes. The aim of this review is to provide insights into the field of nanomedicine and particularly into the wide context of TiO₂-NP-mediated anticancer effect, shedding light on the achievements of nanotechnology and proposing this nanostructured material as a promising anticancer photosensitizer.

Facile synthesis of GO and g-C3N4 nanosheets encapsulated magnetite ternary nanocomposite for superior photocatalytic degradation of phenol

In this study, the synthesis of Fe₃O₄@GO@g-C₃N₄ ternary nanocomposite for enhanced photocatalytic degradation of phenol has been investigated. The surface modification of Fe₃O₄ was performed through layer-by-layer electrostatic deposition meanwhile the heterojunction structure of ternary nanocomposite was obtained through sonicated assisted hydrothermal method. The photocatalysts were characterized for their crystallinity, surface morphology, chemical functionalities, and band gap energy. The Fe₃O₄@GO@g-C₃N₄ ternary nanocomposite achieved phenol degradation of ∼97%, which was significantly higher than that of Fe₃O₄@GO (∼75%) and Fe₃O₄ (∼62%). The enhanced photoactivity was due to the efficient charge carrier separation and desired band structure. The photocatalytic performance was further enhanced with the addition of hydrogen peroxide, in which phenol degradation up to 100% was achieved in 2 h irradiation time. The findings revealed that operating parameters have significant influences on the photocatalytic activities. It was found that lower phenol concentration promoted higher activity. In this study, 0.3 g of Fe₃O₄@GO@g-C₃N₄ was found to be the optimized photocatalyst for phenol degradation. At the optimized condition, the reaction rate constant was reported as 6.96 × 10^-3 min^-1. The ternary photocatalyst showed excellent recyclability in three consecutive cycles, which confirmed the stability of this ternary nanocomposite for degradation applications.

Growth of Zn0.5Cd0.5S/α-Ni(OH)2 heterojunction by a facile hydrothermal transformation efficiently boosting photocatalytic hydrogen production

A rationally designed/constructed catalyst with α-Ni(OH)₂ over Zn–Cd–S shows enhanced photocatalytic hydrogen evolution attributed to the interface providing a fast charge transfer channel and reducing the photo-generated carrier recombination probability.