Synergistic acceleration of experimental tooth movement by supplementary high-frequency vibration applied with a static force in rats

Age-related alveolar bone maladaptation in adult orthodontics: finding new ways out

Compared with teenage patients, adult patients generally show a slower rate of tooth movement and more pronounced alveolar bone loss during orthodontic treatment, indicating the maladaptation of alveolar bone homeostasis under orthodontic force. However, this phenomenon is not well-elucidated to date, leading to increased treatment difficulties and unsatisfactory treatment outcomes in adult orthodontics. Aiming to provide a comprehensive knowledge and further inspire insightful understanding towards this issue, this review summarizes the current evidence and underlying mechanisms. The age-related abatements in mechanosensing and mechanotransduction in adult cells and periodontal tissue may contribute to retarded and unbalanced bone metabolism, thus hindering alveolar bone reconstruction during orthodontic treatment. To this end, periodontal surgery, physical and chemical cues are being developed to reactivate or rejuvenate the aging periodontium and restore the dynamic equilibrium of orthodontic-mediated alveolar bone metabolism. We anticipate that this review will present a general overview of the role that aging plays in orthodontic alveolar bone metabolism and shed new light on the prospective ways out of the impasse.

The gingival crevicular fluid biomarkers with micropulse vibration device: A pilot study

Purpose

The aim of this study is to investigate the impact of vibration stimulation on gingival crevicular fluid biomarkers and orthodontic tooth movement.

Methods

Forty patients were randomly assigned to receive therapy with an intraoral vibration device (n = 20, AcceleDent®) or no treatment (n = 20) at a university orthodontic clinic. The quantity of fluid in the gingival sulcus, biomarkers of each fluid in the gingival sulcus, and orthodontic tooth movement were analyzed at three-time intervals (T1, T2, T3) before and after therapy (T0).

Results

The results showed that vibration treatment led to higher levels of osteoclast biomarkers (RNAKL, RANKL/OPG) and inflammatory biomarkers (TNF-, IL-11, IL-18) compared to the control group. Additionally, vibration treatment at T1, T2, and T3 significantly improved tooth mobility and GCF volume. The gingival crevicular fluid biomarker levels of the T0, T1, and T2 vibration groups, as well as IL-11, IL-18, TGF-1, and TNF-α vibration groups, were significantly higher than those of the control group at different time points.

Conclusion

vibration therapy was found to be closely associated with bone-breaking cells and inflammatory factor levels.

Vibrational Force on Accelerating Orthodontic Tooth Movement: A Systematic Review and Meta-Analysis

This study aimed to systematically gather and analyze the current level of evidence for the effectiveness of the vibrational force in accelerating orthodontic tooth movement (OTM). This systematic review was conducted using three electronic databases: Scopus, PubMed, and Google Scholar until March 2022. The search was done through the following journals: European Journal of Orthodontics, American Journal of Orthodontics and Dentofacial Orthopedics, The Angle Orthodontist, Progress in Orthodontics, and Seminars in Orthodontics. Human or animal studies that have evaluated the effect of vibrational force on the rate of OTM were selected. A meta-analysis was performed for the rate of canine movement per month. Database research, elimination of duplicate studies, data extraction, and risk of bias assessment were performed by authors independently and in duplication. A fixed and random-effect meta-analysis was performed to evaluate the effect of vibrational forces. A total of 19 studies (6 animal and 13 human studies) that met the inclusion criteria were included. Meta-analysis was performed based on four human clinical trials. Three out of four studies showed no significant difference in the rate of canine movement between vibrational force and control groups. The limitation of this study was the small sample size and significant heterogeneity among the studies. Although vibrational forces have been shown to accelerate OTM in experimental studies, the results are inconsistent in clinical studies. The inability to apply desired peak load to the targeted teeth may be the main factor in inconsistent clinical outcomes.

Effect of 125 Hz and 150 Hz vibrational frequency electric toothbrushes on the rate of orthodontic tooth movement and prostaglandin E2 levels

Objective

To evaluate the effects of an electric toothbrush with vibrational frequencies of 125 Hz and 150 Hz on the orthodontic tooth movement (OTM) rate and the production of prostaglandin E2 (PGE2).

Methods

Out of thirty patients (aged 18-25 years; 16 females and 14 males), ten patients each formed Group A and B, who used electric toothbrushes with 125 Hz and 150 Hz vibrations, respectively. The remaining ten patients (Group C) served as the control group and did not use electric toothbrushes. The rate of OTM and levels of PGE2 using microcapillary pipettes were calculated before the start of retraction (T0), on the 30th day (T1), on the 60th day (T2), and on the 90th day (T3) from the start of retraction in all the groups.

Results

There was a statistically significant difference in the mean OTM values and PGE2 levels in all three groups at different time intervals, with the maximum difference seen in Group B compared to Group A and least in Group C at T1, T2 and T3.

Conclusions

The rate of OTM and levels of PGE2 were highest in patients who used an electric toothbrush with 150 Hz mechanical vibration compared to those who used an electric toothbrush with 125 Hz mechanical vibration and least in patients who did not use an electric toothbrush. Mechanical vibration led to an increase in the PGE2 levels and accelerated the OTM.

The effect of low-frequency high-intensity ultrasound combined with aspirin on tooth movement in rats

BACKGROUND

Given the difficulties or incapacity of teeth movement in orthodontic treatment, the ways to speed tooth movement must be investigated. Besides, nonsteroidal anti-inflammatory drugs (NSAIDs) were utilized to treat pain caused by tooth movement during orthodontic treatment. The purpose of this study is to examine the impact of aspirin and low-frequency high-intensity ultrasound (LFHIU) on rat orthodontic tooth movement in rats.

METHODS

Thirty-six male Sprague-Dawley rats were divided into three groups: orthodontic (O), ultrasound-treated orthodontic (OU), and ultrasound-treated orthodontic with aspirin gavage (OUA) group. In the OU and OUA group, LFHIU (44 W/cm2, 28 kHz) was applied to the buccal side of the maxillary first molar alveolar bone for 10 s every day. In the OUA group, aspirin was given by gavage every day. The rats were sacrificed on days 1, 3, 7, and 14.

RESULTS

After ultrasonic treatment, the speed of tooth movement was increased by about 1.5 times. And the number of osteoclasts considerably increased by about 2 times. However, they decreased slightly after aspirin gavage. By Applying ultrasound therapy, Receptor Activator for Nuclear Factor-κ B Ligand (RANKL) levels in periodontal tissue were elevated. Aspirin was able to reduce these increases. Results from Micro Computed Tomography (Micro-CT) revealed that bone mineral density decreased by about 1/5 after ultrasound treatment on the compression side. The rate of bone mineral apposition indicated that bone was forming under tension, and that of the OU group increased by about 1.3 times that O group.

CONCLUSIONS

Although aspirin slowed this trend, LFHIU still enhanced overall tooth mobility in orthodontic treatment.

The role of TRPV2 as a regulator on the osteoclast differentiation during orthodontic tooth movement in rats

When orthodontic forces are applied to teeth, bone remodeling, which consists of bone resorption and bone formation, occurs around the teeth. Transient receptor potential vanilloid 2 (TRPV2) is a cation channel expressed in various cell types that responds to various stimuli, including mechanical stress, and involved in calcium oscillations during the early stages of osteoclast differentiation. However, in vivo expression of TRPV2 in osteoclasts has not yet been reported, and temporo-spatial expression of TRPV2 during osteoclast differentiation is unclear. In this study, we examined the TRPV2 expression during experimental tooth movement and assessed the effect of TRPV2 on osteoclast differentiation. TRPV2 was detected on day 1 after experimental tooth movement on the compression side, and the number of TRPV2-expressing cells significantly increased on day 7. These TRPV2-expressing cells had a single, or multiple nuclei and were positive for TRAP activity. Consistent with these in vivo findings, in vitro experiments using RAW264.7 osteoclast progenitor cells showed that TRPV2 mRNA was increased at the early stage of osteoclast differentiation and maintained until the late stage. Furthermore, a TRPV2 channel selective antagonist significantly inhibited osteoclast differentiation. These findings suggest that TRPV2 may have a regulatory role in osteoclast differentiation during orthodontic tooth movement.

Light orthodontic force with high-frequency vibration accelerates tooth movement with minimal root resorption in rats

OBJECTIVES

To determine and compare the effects of high-frequency mechanical vibration (HFV) with light force and optimal force on the tooth movement and root resorption in rat model.

MATERIALS AND METHODS

Seventy-two sites in 36 male Wistar rats were randomly assigned using a split-mouth design to control (no force/no vibration) or experimental groups: HFV (125 Hz), light force (5 g), optimal force (10 g), light force with HFV, and optimal force with HFV for 14 and 21 days. The amount of tooth movement, 3D root volume, and root resorption area were assessed by micro-computed tomography and histomorphometric analysis.

RESULTS

Adjunction of HFV with light force significantly increased the amount of tooth movement by 1.8-fold (p = 0.01) and 2.0-fold (p = 0.01) at days 14 and 21 respectively. The HFV combined with optimal force significantly increased the amount of tooth movement by 2.1-fold (p = 0.01) and 2.2-fold (p = 0.01) at days 14 and 21 respectively. The root volume in control (distobuccal root (DB): 0.60 ± 0.19 mm³, distopalatal root (DPa): 0.60 ± 0.07 mm³) and HFV (DB: 0.60 ± 0.08 mm³, DPa: 0.59 ± 0.11 mm³) were not different from the other experimental group (range from 0.44 ± 0.05 to 0.60 ± 0.1 mm³) with the lowest volume in optimal force group.

CONCLUSIONS

Adjunction of HFV with orthodontic force significantly increased tooth movement without causing root resorption.

CLINICAL RELEVANCE

Using light force with HFV could help to identify alternative treatment option to reduce the risk of root resorption.

Establishment, FEM analysis and experimental validation of tooth movement prediction model of orthodontic archwire T-loop

Background

The T-loop has been used clinically to close gap between teeth. And it is a typical orthodontic archwire bending method. However, the design of the T-loop parameters for different patients is based on the clinical experience of the dentists. The variation in dentists' clinical experience is the main reason for inadequate orthodontic treatment, even high incidence of postoperative complications.

Methods

Firstly, the tooth movement prediction model is established based on the analysis of the T-loop structure and the waxy model dynamic resistance. As well as the reverse reconstruction of the complete maxillary 3D model based on the patient CBCT images, the oral biomechanical FEM analysis is completed. A maxillary waxy dental model is manufactured to realize the water-bath measurement experiment in vitro mimicking the oral bio-environment. Thus, the calculated, simulation and experimental data are obtained, as well as obtaining a cloud of total deformation from the simulation analysis.

Results

The growth trend of the 11 sets of simulation data is the same as that of the experimental data. And all of them show that the tooth displacement is positively correlated with the cross-sectional size of the archwire, and the clearance distance. As well as the higher Young's modulus of the archwire material, the greater the tooth displacement. And the effect of archwire parameters on tooth displacement derived from simulation and experimental data is consistent with the prediction model. The experimental and calculated data are also compared and analyzed, and the two kinds of data are basically consistent in terms of growth trends and fluctuations, with deviation rates ranging from 2.17  to  10.00%.

Conclusions

This study shows that the accuracy and reliability of the tooth movement prediction model can be verified through the comparative analysis and deviation calculation of the obtained calculated, simulation and experimental data, which can assist dentists to safely and efficiently perform orthodontic treatment on patients. And the FEM analysis can achieve predictability of orthodontic treatment results.

Vibration accelerates orthodontic tooth movement by inducing osteoclastogenesis via transforming growth factor-β signalling in osteocytes

Background

We previously found the conditions of supplementary vibration that accelerated tooth movement and induced bone resorption in an experimental rat tooth movement model. However, the molecular biological mechanisms underlying supplementary vibration-induced orthodontic tooth movement are not fully understood. Transforming growth factor (TGF)-β upregulates osteoclastogenesis via induction of the receptor activator of nuclear factor kappa B ligand expression, thus TGF-β is considered an essential cytokine to induce bone resorption.

Objectives

The aim of this study is to examine the role of TGF-β during the acceleration of orthodontic tooth movement by supplementary vibration.

Materials and methods

In experimental tooth movement, 15 g of orthodontic force was loaded onto the maxillary right first molar for 28 days. Supplementary vibration (3 g, 70 Hz) was applied to the maxillary first molar for 3 min on days 0, 7, 14, and 21. TGF-β receptor inhibitor SB431542 was injected into the submucosal palatal and buccal areas of the maxillary first molars once every other day. The co-culture of RAW264.7 cells and MLO-Y4 cells was used as an in vitro osteoclastogenesis model.

Results

SB431542 suppressed the acceleration of tooth movement and the increase in the number of osteoclasts by supplementary vibration in our experimental rat tooth movement model. Immunohistochemical analysis showed supplementary vibration increased the number of TGF-β1-positive osteocytes in the alveolar bone on the compression side during the experimental tooth movement. Moreover, vibration-upregulated TGF-β1 in MLO-Y4 cells induced osteoclastogenesis.

Conclusions

Orthodontic tooth movement was accelerated by supplementary vibration through the promotion of the production of TGF-β1 in osteocytes and subsequent osteoclastogenesis.

Bone permeability and mechanotransduction: Some current insights into the function of the lacunar-canalicular network

Lacunar-canalicular (LC) permeability involves the passage of fluids, nutrients, oxygen, ions, and signalling molecules through bone tissue, facilitating the maintenance of bone vitality and function and responses to various physiological conditions and diseases. LC permeability and fluid flow-shear stress/drag force play important roles in mechanotransduction in bone tissue by inducing mechanical stimuli in osteocytes, modulating cellular functions, and determining bone adaptation. Alterations in LC structure may therefore influence the fluid flow pattern through the LC network, thereby affecting the ability of osteocytes to sense and translate mechanical signals and possibly contributing to bone remodelling. Several bone-health conditions are associated with changes in LC structure and function and may affect mechanotransduction and responses, although the mechanisms underlying these associations are still not fully understood. In this review, recent studies of LC networks, their formation and transfer mechanical stimuli, and changes in structure, functional permeability, and mechanotransduction that result from age, pathology, and mechanical loading are discussed. Additionally, applications of vibration and low-intensity pulsed ultrasound in bone healthcare and regeneration fields are also presented.

Effects of compressive stress combined with mechanical vibration on osteoclastogenesis in RAW 264.7 cells

OBJECTIVES

To investigate the effects of compressive force and/or mechanical vibration on NFATc1, DCSTAMP, and CTSK (cathepsin K) gene expression and the number of tartrate-resistant acid phosphatase (TRAP)-positive multinucleated cells in RAW 264.7 cells, a murine osteoclastic-like cell line.

MATERIALS AND METHODS

RAW 264.7 cells were subjected to mechanical vibration, compressive force, or compressive force combined with vibration. Cell viability and the numbers of TRAP-positive multinucleated cells were evaluated. NFATc1, DCSTAMP, and CTSK gene expressions were analyzed using real-time quantitative reverse transcription polymerase chain reaction.

RESULTS

Compressive force combined with mechanical vibration significantly increased the numbers of TRAP-positive multinucleated cells but did not significantly affect cell viability. In addition, compressive force combined with mechanical vibration significantly increased NFATc1, DCSTAMP, and CTSK mRNA expression compared with compressive force or vibration alone.

CONCLUSIONS

Compressive force combined with mechanical vibration induces osteoclastogenesis and upregulates NFATc1, DCSTAMP, and CTSK gene expression in RAW 264.7 cells. These results provide more insight into the mechanisms by which vibratory force accelerates orthodontic tooth movement.

Effect of vibration on orthodontic tooth movement in a double blind prospective randomized controlled trial

The purpose of the present study was to investigate the effect of vibration on orthodontic tooth movement and safety assessment based on our previous basic research in animal experiments. A double-blind prospective randomized controlled trial using split-mouth design was conducted in patients with malocclusion. The left and right sides of maxillary arch were randomly assigned to vibration (TM + V) and non-vibration (TM) groups. After leveling, vibrations (5.2 ± 0.5 g-forces (gf), 102.2 ± 2.6 Hertz (Hz)) were supplementary applied to the canine retracted with 100 gf in TM + V group for 3 min at the monthly visit under double-blind fashion, and the canine on the other side without vibration was used as TM group. The amount of tooth movement was measured blindly using a constructed three-dimensional dentition model. The amount of canine movement per visit was 0.89 ± 0.55 mm in TM group (n = 23) and 1.21 ± 0.60 mm in TM + V group (n = 23), respectively. There was no significant difference of pain and discomfort, and root resorption between the two groups. This study indicates that static orthodontic force with supplementary vibration significantly accelerated tooth movement in canine retraction and reduced the number of visits without causing side effects.

EFFECTIVENESS OF VIBRATION (CYCLIC LOADING) IN ACCELERATING BONE REMODELING AND ORTHODONTIC TOOTH MOOVEMENT: A SHORT REVIEW

This paper assesses the effectiveness of vibration in accelerating bone remodeling and orthodontic tooth movement. Databases of PubMed, Web of Science, and ScienceDirect were searched from January 2017 to March 2019 for randomized or quasi-randomized controlled trials that evaluated the effectiveness of vibration in accelerating bone remodeling and orthodontic tooth movement. The inclusion criteria were as follows: (i) studies that assessed the efficacy of vibration (cyclic loading) in bone remodeling and orthodontic tooth movement and (ii) those that employed groupings (experimental vs. control/placebo groups) on the basis of the use of vibration (cyclic loading). Eight clinical trials were included in this short review. Five studies met the eligibility criteria for bone remodeling and orthodontic tooth movement. Four studies found that low-magnitude high-frequency vibration could accelerate bone remodeling. However, contradictory results were obtained with regard to the acceleration of orthodontic tooth movement by vibration in human participants. Low-magnitude high-frequency vibration can accelerate bone remodeling and orthodontic tooth movement. However, this acceleration is dependent on the magnitude and frequency. Further research is necessary to determine the most feasible protocols for investigating the effects of magnitude and frequency of vibration on the acceleration of orthodontic tooth movement in human participants.

Osteoblast lineage cells and periodontal ligament fibroblasts regulate orthodontic tooth movement that is dependent on Nuclear Factor-kappa B (NF-kB) activation

OBJECTIVES

To investigate the role of NF-κB in osteoblast lineage cells and periodontal ligament (PDL) fibroblasts during orthodontic tooth movement (OTM).

MATERIALS AND METHODS

Transgenic mice that expressed a dominant negative mutant of the inhibitor of kB kinase (IKK-DN) with lineage specific expression in osteoblastic cells and PDL fibroblasts driven by a response element in the collagen1α1 promoter and matched wild-type (WT) mice were examined. A 10-12 g force was applied by a NiTi coil and maintained for 5 or 12 days. OTM distance, PDL width, and bone volume fraction were measured using micro computed tomography. Osteoclast numbers were counted in tartrate-resistant acid phosphatase-stained sections. Activation of nuclear factor kappa B (NF-kB) was assessed by nuclear localization of p65, and the receptor activator of nuclear factor-κB ligand (RANKL) was measured by immunofluorescence and compared to control specimens with no orthodontic force.

RESULTS

OTM-induced NF-kB activation (p65 nuclear localization) in WT mice was largely blocked in transgenic (TG) mice. OTM was significantly reduced in the TG mice compared to WT mice along with reduced osteoclastogenesis, narrower PDL width, higher bone volume fraction, and reduced RANKL expression.

CONCLUSIONS

Osteoblast lineage cells and PDL fibroblasts are key contributors to alveolar bone remodeling in OTM through IKKβ dependent NF-κB activation.

Peak loads on teeth from a generic mouthpiece of a vibration device for accelerating tooth movement

INTRODUCTION

The effect of vibrational force (VF) on accelerating orthodontic tooth movement depends on the ability to control the level of stimulation in terms of its peak load (PL) on the tooth. The objective of this study was to investigate the PL distribution on the teeth when a commercial VF device is used.

METHODS

Finite element models of a human dentition from cone-beam computed tomography images of an anonymous subject and a commonly used commercial VF device were created. The device consists of a mouthpiece and a VF source. The maxilla and mandible bites on the mouthpiece with the VF applied to it. Interface elements were used between the teeth and the mouthpiece, allowing relative motion at the interfaces. The finite element model was validated experimentally. Static load and VF with 2 frequencies were used, and the PL distributions were calculated. The effects of mouthpiece materials and orthodontic appliances on the PL distribution were also investigated.

RESULTS

The PL distribution of this kind of analyzed device is uneven under either static force or VF. Between the anterior and posterior segments, the anterior segment receives the most stimulations. The mouthpiece material affects the PL distribution. The appliance makes the PL more concentrated on the incisors. The VF frequencies tested have a negligible influence on both PL magnitude and distribution.

CONCLUSIONS

The device analyzed delivers different levels of stimulation to the teeth in both maxilla and mandible. Changing the material property of the mouthpiece alters the PL distribution.

Performance comparison of vibration devices on orthodontic tooth movement - A systematic review and meta-analysis

Background

To evaluate the efficiency of vibratory devices in altering rate of orthodontic tooth movement.

Methods

A literature search up to January 31, 2020 was conducted in three electronic databases: PubMed, Cochrane Central Register of Controlled Trials (CENTRAL) and Science Direct, to identify studies on vibratory devices reporting any alteration in tooth movement as a primary outcome. Only articles published in English language were included. A meta-analysis was done to compare the amount of tooth movement (in mm) in patients treated with vibratory devices compared to control groups, to quantify weighted treatment effects.

Results

A total of two split mouth studies, six parallel arm randomized control trials (RCT) one split mouth RCT, and three regular RCTs were assessed qualitatively. Quantitative assessment was done for 8 randomized trials using a forest plot (310 patients). Pooled data showed increase in the amount of tooth movement by 0.34 ​mm (95% CI:0.25,0.42). There was a statistically significant difference noted for this result at p ​< ​0.00001.

Conclusion

Current evidence suggests a moderate to high level of certainty in regard to included studies in this systematic review and meta-analysis. Vibratory devices when used in conjunction with fixed orthodontic appliances show significant increase in the rate of tooth movement. These devices can be used by clinicians to reduce treatment duration and patient discomfort.

PROSPERO registration

CRD42020169675.

The Effect of High-Frequency Vibration on Tooth Movement and Alveolar Bone in Non-Growing Skeletal Class II High Angle Orthodontic Patients: Case Series

This study presents a novel technique utilizing high-frequency vibration to shorten treatment time and preserve alveolar bone in challenging orthodontic cases that have been treated with Invisalign^® clear aligners. Four non-growing orthodontic patients (age range 14–47 years old) with Class II skeletal patterns (convex profiles with retrognathic mandibles) who sought correction of their crowded teeth and non-surgical correction of their convex profiles were included in this study. These patients were treated using Invisalign clear aligners together with high-frequency vibration (HFV) devices (120 Hz) (VPro5™) that were used by all patients for five minutes per day during active orthodontic treatment. Vertical control and forward rotation of the mandible for each patient was achieved through pre-programming the Invisalign to produce posterior teeth intrusion. Successful forward rotation of the mandibles achieved in all patients led to improvement of their facial convex profiles (apical base relationship (ANB) improved 2.1 ± 0.5 degrees; FMA (Frankfurt mandibular plane angle) improved 1.2 + 1.1 degrees). Dental decompensation was achieved by lingual tipping of the lower incisors and palatal root torque of upper incisors. The use of HFV together with Invisalign facilitated achieving these results within a 12 ± 6 months period. In addition, more bone labial to the lower incisors after their lingual movement was noted. In conclusion, the use of HFV concurrent with SmartTrack Invisalign aligners allowed complex tooth movement and forward mandibular projection without surgery in non-growing patients with skeletal Class II relationships. The clinical impact and implications of this case series are: (1) the use of HFV facilitates complex orthodontic tooth movement including posterior teeth intrusion and incisor decompensation; (2) forward mandibular projection of the mandible and increased bone formation labial to lower incisors can be achieved in non-growing patients that may minimize the need for surgical intervention in similar cases or gum recession due to lower incisors labial inclination.

Comparative assessment of mouse models for experimental orthodontic tooth movement

Animal experiments are essential for the elucidation of biological-cellular mechanisms in the context of orthodontic tooth movement (OTM). So far, however, no studies comparatively assess available mouse models regarding their suitability. OTM of first upper molars was induced in C57BL/6 mice either via an elastic band or a NiTi coil spring for three, seven or 12 days. We assessed appliance survival rate, OTM and periodontal bone loss (µCT), root resorptions, osteoclastogenesis (TRAP⁺ area) and local expression of OTM-related genes (RT-qPCR). Seven days after the elastic bands were inserted, 87% were still in situ, but only 27% after 12 days. Survival rate for the NiTi coil springs was 100% throughout, but 8.9% of the animals did not survive. Both methods induced significant OTM, which was highest after 12 (NiTi spring) and 7 days (band), with a corresponding increase in local gene expression of OTM-related genes and osteoclastogenesis. Periodontal bone loss and root resorptions were not induced at a relevant extent by neither of the two procedures within the experimental periods. To induce reliable OTM in mice beyond 7 days, a NiTi coil spring is the method of choice. The elastic band method is recommended only for short-term yes/no-questions regarding OTM.

Comparison of the Effects of Photobiomodulation with Different Lasers on Orthodontic Movement and Reduction of the Treatment Time with Fixed Appliances in Novel Scientific Reports: A Systematic Review with Meta-Analysis

Background: The duration of orthodontic treatment is one of the most important aspects considered by patients. Photobiomodulation (PBM) depends upon the exposure of the tissue to particular, therapeutic wavelengths of light in the "therapeutic window" (from 600 to 1200 nm). PBM increases cell metabolism, which leads to higher ATP production. Increasing the amount of ATP in well-vascularized bone cells promotes cell proliferation and differentiation, creating a favorable environment for tooth movement. Objective: The aim of the study is to discuss and compare the use of PBM in accelerating the orthodontic movement and reducing the time of treatment. Materials and methods: A systematic review was conducted. Literature searches were performed using Medline (PubMed), Web of Science, and Scopus (from September 13 to September 20, 2019). The quality assessment was performed using the Jadad scale for reporting randomized controlled trials for randomized clinical trial and randomized control clinical trial studies, and the Newcastle/Ottawa Quality Assessment Form for case/control studies. Results: Thirty-three articles from PubMed, 46 from Scopus, 5 from Web of Science were selected. After removal of duplicates, 82 articles were analyzed. Subsequently, 74 articles were excluded because they did not meet the inclusion criteria. The remaining eight articles were included in the qualitative synthesis. Conclusions and summary: PBM is an efficient, effective, and noninvasive method to accelerate orthodontic tooth movement. PBM should be introduced into the daily practice of treating various malocclusions as an additional procedure. Intraoral application gives better results and its introduction to treatment seems more reasonable.

Examination of the effect of combined use of Er:YAG laser irradiation and mechanical force loading on bone metabolism using primary human gingival fibroblasts

Prolonged treatment and painful tooth movement are major problems for patients undergoing orthodontic treatment. Accelerating the movement of teeth leads to shortening of the treatment period, so various studies on the movement of teeth have been conducted in the field of orthodontics. In previous studies, we performed a fiber incision-like fiberotomy using an Er:YAG laser in rats and confirmed acceleration of tooth movement. Therefore, in this study, the effect of Er:YAG laser irradiation on human gingival fibroblasts was investigated in vitro. Human gingival fibroblasts (2.0 × 10⁵ cells) were seeded in a 6-well plate and reached 80% confluence 24 h later. A control group not undergoing any irradiation and 3 groups undergoing laser irradiation at 0.6 W, 1.0 W, and 1.2 W were investigated. Laser irradiation was performed 24 h after cell seeding. The cells were then recovered 24 h later, and the cyclooxygenase-2 (COX-2), interleukin-1β (IL-1β), tumor necrosis factor-α (TNF-α), bone morphogenetic protein-2 (BMP-2), and BMP-4 genes were confirmed by PCR. In addition, a control group not undergoing any procedures, a group undergoing only Er:YAG laser irradiation, a group undergoing only centrifugal loading, and a group undergoing both Er:YAG laser irradiation and centrifugal force loading were investigated. After 24 h, cells were collected and PCR was performed. Twenty-four hours after laser irradiation, gene expressions were examined by quantitative RT-PCR, which showed that the gene expressions of COX-2, IL-1β, TNF-α, BMP-2, and BMP-4 increased depending on the amount of irradiation energy, with the largest value at 1.2 W. Gene expressions of COX-2, IL-1β, TNF-α, BMP-2, and BMP-4 were significantly higher in the laser with centrifugal load group than in the load group. These results suggest that genes related to bone metabolism are activated in human gingival fibroblasts when mechanical stimulation and laser irradiation are combined. This helps to elucidate the effects of Er:YAG laser irradiation during tooth movement.

Estrogen protects dental roots from orthodontic-induced inflammatory resorption

OBJECTIVE

Root resorption is a side effect of orthodontic tooth movement (OTM). Despite the recognized role of estrogen on bone, there is little information about their effects on orthodontic-induced inflammatory root resorption (OIIRR). We aimed to investigate if estrogen deficiency affects OIIRR in two mice strains.

METHODS

Female Balb/C (Balb) and C57BL6/J (C57) mice were ovariectomized (OVX) and replaced with estradiol (E2). Tooth samples subjected or not to OTM were collected and analyzed by microCT, histomorphometry and qPCR.

RESULTS

OVX resulted in decreased root volume (RV/TV) and root mineral density (RMD) in Balb mice without OTM. In contrast, OVX did not modify physiological root structure of C57 mice. OTM and OIIRR were increased after OVX in both mice strains after 30 days. E2 replacement reversed this phenotype in Balb, but not in C57 mice. Due to the significant increase of OIIRR in OVX Balb mice, the expression of key molecules was investigated in periodontium. Accordingly, these mice showed increased expression of receptor activator of nuclear factor kappa-B ligand (RANKL), tumor necrosis factor alpha, matrix metalloproteinases-2 and -13 and decreased osteoprotegerin (OPG) and interleukin-10 expression after OTM. E2 replacement reversed the changes of these markers.

CONCLUSION

The lack of estrogen in Balb mice without OTM triggered loss of root structure which was positively correlated to RANKL/OPG ratio. Regardless of mouse strain, the absence of estrogen following OTM induced OIIRR. Mechanisms involve the imbalance of RANKL/OPG system, inflammatory and osteoclastic makers.

Delayed tooth movement in Runx2+/- mice associated with mTORC2 in stretch-induced bone formation

Runt-related transcription factor 2 (Runx2) is an essential transcription factor for osteoblast differentiation, and is activated by mechanical stress to promote osteoblast function. Cleidocranial dysplasia (CCD) is caused by mutations of RUNX2, and CCD patients exhibit malocclusion and often need orthodontic treatment. However, treatment is difficult because of impaired tooth movement, the reason of which has not been clarified. We examined the amount of experimental tooth movement in Runx2^+/− mice, the animal model of CCD, and investigated bone formation on the tension side of experimental tooth movement in vivo. Continuous stretch was conducted to bone marrow stromal cells (BMSCs) as an in vitro model of the tension side of tooth movement. Compared to wild-type littermates the Runx2^+/− mice exhibited delayed experimental tooth movement, and osteoid formation and osteocalcin (OSC) mRNA expression were impaired in osteoblasts on the tension side of tooth movement. Runx2 heterozygous deficiency delayed stretch-induced increase of DNA content in BMSCs, and also delayed and reduced stretch-induced alkaline phosphatase (ALP) activity, OSC mRNA expression, and calcium content of BMSCs in osteogenic medium. Furthermore Runx2^+/− mice exhibited delayed and suppressed expression of mammalian target of rapamycin (mTOR) and rapamycin-insensitive companion of mTOR (Rictor), essential factors of mTORC2, which is regulated by Runx2 to phosphorylate Akt to regulate cell proliferation and differentiation, in osteoblasts on the tension side of tooth movement in vivo and in vitro. Loss of half Runx2 gene dosage inhibited stretch-induced PI3K dependent mTORC2/Akt activity to promote BMSCs proliferation. Furthermore, Runx2^+/− BMSCs in osteogenic medium exhibited delayed and suppressed stretch-induced expression of mTOR and Rictor. mTORC2 regulated stretch-elevated Runx2 and ALP mRNA expression in BMSCs in osteogenic medium. We conclude that Runx2^+/− mice present a useful model of CCD patients for elucidation of the molecular mechanisms in bone remodeling during tooth movement, and that Runx2 plays a role in stretch-induced proliferation and osteogenesis in BMSCs via mTORC2 activation.

•

Experimental tooth movement is delayed in Runx2^+/− mice compared with wild-type mice.

•

Runx2 plays a role in stretch-induced proliferation and differentiation of BMSCs via mTORC2 activation.

•

Runx2^+/− mice are useful model to clarify the mechanical stress-induced bone remodeling in CCD patients.

Methionine Enkephalin Suppresses Osteocyte Apoptosis Induced by Compressive Force through Regulation of Nuclear Translocation of NFATc1

Mechanical stress stimulates bone remodeling, which occurs through bone formation and resorption, resulting in bone adaptation in response to the mechanical stress. Osteocytes perceive mechanical stress loaded to bones and promote bone remodeling through various cellular processes. Osteocyte apoptosis is considered a cellular process to induce bone resorption during mechanical stress-induced bone remodeling, but the underlying molecular mechanisms are not fully understood. Recent studies have demonstrated that neuropeptides play crucial roles in bone metabolism. The neuropeptide, methionine enkephalin (MENK) regulates apoptosis positively and negatively depending on cell type, but the role of MENK in osteocyte apoptosis, followed by bone resorption, in response to mechanical stress is still unknown. Here, we examined the roles and mechanisms of MENK in osteocyte apoptosis induced by compressive force. We loaded compressive force to mouse parietal bones, resulting in a reduction of MENK expression in osteocytes. A neutralizing connective tissue growth factor (CTGF) antibody inhibited the compressive force-induced reduction of MENK. An increase in osteocyte apoptosis in the compressive force-loaded parietal bones was inhibited by MENK administration. Nuclear translocation of NFATc1 in osteocytes in the parietal bones was enhanced by compressive force. INCA-6, which inhibits NFAT translocation into nuclei, suppressed the increase in osteocyte apoptosis in the compressive force-loaded parietal bones. NFATc1-overexpressing MLO-Y4 cells showed increased expression of apoptosis-related genes. MENK administration reduced the nuclear translocation of NFATc1 in osteocytes in the compressive force-loaded parietal bones. Moreover, MENK suppressed Ca²⁺ influx and calcineurin and calmodulin expression, which are known to induce the nuclear translocation of NFAT in MLO-Y4 cells. In summary, this study shows that osteocytes expressed MENK, whereas the MENK expression was suppressed by compressive force via CTGF signaling. MENK downregulated nuclear translocation of NFATc1 probably by suppressing Ca²⁺ signaling in osteocytes and consequently inhibiting compressive force-induced osteocyte apoptosis, followed by bone resorption. © 2020 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

Vibration activates the actin/NF-κB axis and upregulates IL-6 and IL-8 expression in human periodontal ligament cells

We previously reported that mechanical vibration-induced proinflammatory cytokines, interleukin-6 (IL-6) and IL-8, expression in human periodontal ligament (hPDL) cells, however, the underlying mechanism remained unclear. Mechanical stimuli are able to activate cellular responses by inducing the activation of several signaling pathways including cytoskeletal changes and inflammation. The actin cytoskeleton is a highly dynamic network and plays many important roles in intracellular events. Here, we aimed to investigate the involvement of a pivotal mediator of inflammatory responses, nuclear factor-κB (NF-κB), and actin polymerization in vibration-induced upregulation of IL-6 and IL-8 expression in hPDL cells. hPDL cells were pretreated with the NF-κB inhibitor BAY 11-7082 or cytochalasin D, respectively, before exposure to vibration. IL-6 and IL-8 messenger RNA (mRNA) and protein expression were quantified by quantitative polymerase chain reaction and enzyme-linked immunosorbent assays, respectively. Subcellular localization of the NF-κB p65 subunit was visualized by immunofluorescent staining. We found an increase in NF-κB nuclear translocation in vibrated cells compared with control cells. Pretreatment with BAY 11-7082 significantly inhibited vibration-induced IL-6 and IL-8 mRNA and protein expression in hPDL cells. Moreover, pretreatment with cytochalasin D inhibited NF-κB nuclear translocation and attenuated upregulation of IL-6 and IL-8 mRNA and protein in vibrated cells. Therefore, modulation of actin cytoskeletal polymerization in response to vibration may activate the NF-κB signaling pathway and subsequently upregulate IL-6 and IL-8 expression in hPDL cells.

[Adjunctive interventions to accelerate orthodontic tooth movement]

Orthodontic treatment is a time-consuming process whose duration usually takes 2-3 years. In general, long-term treatment duration possesses higher risks of complications, which may have adverse impact on patients. Therefore, exploring safe and effective adjunctive interventions to accelerate orthodontic tooth movement and shortening the treatment duration are of profound clinical significance. Currently, numerous adjunctive interventions have been generated and developed to accelerate orthodontic tooth movement, which can be divided into two main categories: surgical and non-surgical. However, an intervention that is widely accepted as a routine practice in orthodontic clinic is lacking. This article aims to review com-mon adjunctive interventions used to accelerate orthodontic tooth movement. This review can be used as a basis to guide clinical practice, shorten treatment duration, and improve patients' prognosis.

Effect of high-frequency vibration on orthodontic tooth movement and bone density

OBJECTIVES:

Previous reports have shown that high-frequency vibration can increase bone remodeling and accelerate tooth movement. The aim of this study was to evaluate the effects of high-frequency vibration on treatment phase tooth movement, and post-treatment bone density at initiation of retention, with cone-beam computed tomography (CBCT).

MATERIALS AND METHODS:

Thirty patients with initial Class I skeletal relationships, initial minimum-moderate crowding (3–5 mm), treated to completion with clear aligners and adjunctive high-frequency vibration, (HFV group) or no vibration, (Control group) were evaluated. The patients were instructed to change aligners as soon as they become loose. Changes in bone density associated with orthodontic treatment were evaluated using i-CAT cone-beam computed tomography (CBCT) and InVivo Anatomage^® software to quantify density using Hounsfield units (HU) between treated teeth in 10 different regions. HU values were averaged and compared against baseline (T1) and between the groups at initiation of retention (T2).

RESULTS:

The average time for aligner change was 5.2 days in the HFV group, and 8.7 days in the control group (P = 0.0001). There was significant T1 to T2 increase of HU values in the upper arch (P = 0.0001) and the lower arch (P = 0.008) in the HFV group. There was no significant change in average HU values in the upper (P = 0.83) or lower arches (P = 0.33) in the control group. The intergroup comparison revealed a significant difference in the upper, (P = 0.0001) and lower arches (P = 0.007).

CONCLUSION:

High-frequency vibration adjunctive to clear aligners, allowed early aligner changes that led to shorter treatment time in minimum-moderate crowded cases. At initiation of retention, the HFV group demonstrated statistically significant increase as compared with pre-treatment bone density, whereas control subjects showed no significant change from pre-treatment bone density.

Vibration enhances osteoclastogenesis by inducing RANKL expression via NF-κB signaling in osteocytes

To shorten the duration of orthodontic treatment it is important not only to reduce risks such as dental caries, periodontal disease, and root resorption, but also to decrease pain and discomfort caused by a fixed appliance. Several studies have investigated the effect of vibration applied to fixed appliances to accelerate tooth movement. Although it was reported that vibration accelerates orthodontic tooth movement by enhancing alveolar bone resorption, the underlying cellular and molecular mechanisms remain unclear. In this study, we investigated the effects of vibration on osteoclastogenesis in vitro and in vivo. Vibration applied to pre-osteoclast cell line RAW264.7 cells enhanced cell proliferation but did not affect their differentiation into osteoclasts. Osteocytes in bone are known to be mechanosensitive and to act as receptor activator of nuclear factor kappa B (NF-κB) ligand (RANKL). Therefore, in the present study, vibration was applied to cells from the osteocyte-like cell line MLO-Y4. In MLO-Y4 cells, vibration induced phosphorylation of the inhibitor of NF-κB (IκB) and caused nuclear localization of NF-κB p65. Additionally, vibration increased RANKL mRNA expression, but did not affect osteoprotegerin (OPG) mRNA expression in MLO-Y4 cells, thus resulting in an increased RANKL/OPG ratio. Consistent with these findings, vibration applied during experimental tooth movement increased NF-κB activation and RANKL expression in osteocytes on the compression side of alveolar bone in vivo, whereas vibration had no such effects on the tension side. Furthermore, in a co-culture of MLO-Y4 cells and RAW264.7 cells, vibration applied to MLO-Y4 cells enhanced osteoclastogenesis. These findings suggest that vibration could accelerate orthodontic tooth movement by enhancing osteoclastogenesis through increasing the number of pre-osteoclasts and up-regulating RANKL expression in osteocytes on the compression side of alveolar bone via NF-κB activation.