Highly selective and sensitive macrocycle-based dinuclear foldamer for fluorometric and colorimetric sensing of citrate in water

A macrocyclic fluorescent probe for the detection of citrate

We present a macrocyclic fluorescent probe for the detection of citrate. This receptor binds citrate through hydrogen-bonding interactions in aqueous solutions, and exhibits a turn-on in fluorescence in response to binding. The presence of common biologically relevant dicarboxylate species does not significantly impact the fluorescence response. We have demonstrated the utility of this probe with the staining of murine splenocytes, and identified different basal levels of citrate present in immune cell subsets via flow cytometry analysis.

Competitive fiber optic sensors for the highly selective detection of mercury in water

Two competitive fiber optic sensors for the rapid, sensitive, and highly selective detection of mercury in water are designed, fabricated, and evaluated. A wavelength-modulated sensor based on an etched single-mode-multimode-single-mode (E-SMS) optical fiber structure and an intensity-modulated sensor based on fiber optics with a slanted end were fabricated by readily reproducible methods. The sensors were activated with a nanostructured chitosan/maghemite (CS/Fe₂O₃) composite thin film for the selective detection of mercury ions (Hg²⁺) in water. The functionalized sensors were implemented to experimentally validate the potential of CS/Fe₂O₃ thin film for optical sensing of Hg²⁺ in drinking water. The sensor based on the E-SMS structure exhibited a wavelength-modulated response with a sensitivity of up to 290 pm/(µg/mL), and the sensor based on the slanted end structure showed an intensity-modulated response with a sensitivity of -0.07dBm/(µg/mL). Validation of the experimental assay method proves the ability to selectively detect chemical interactions as low as 1 ng/mL (one part per billion) of Hg²⁺ in water for both sensors. The high specificity of the two sensors was demonstrated by evaluating their responses to a number of potentially interfering metal ions in water. These sensors are cost-effective, simple to construct, and easy to implement, which makes them very promising for the on-site detection and monitoring of mercury in bodies of water.

Optical Chemical Sensing of Iodide Ions: A Comprehensive Review for the Synthetic Strategies of Iodide Sensing Probes, Challenges, and Future Aspects

Among several anions, iodide (I^- ) ions play a crucial role in human biological activities. In it's molecular form (I₂ ), iodine is utilized for several industrial applications such as syntheses of medicines, fabric dyes, food additives, solar cell electrolytes, catalysts, and agrochemicals. The excess or deficiency of I^- ions in the human body and environmental samples have certain consequences. Therefore, the selective and sensitive detection of I^- ions in the human body and environment is vital for monitoring their overall profile. Amongst various analytical techniques for the estimation of I^- ions, optical-chemical sensing possesses the merits of high sensitivity, selectivity, and utilizing the least amount of sensing materials. The distinctive aims of this manuscript are (i) To comprehensively review the development of optical chemical sensors (fluorescent & colorimetric) reported between 2001-2021 using organic fluorescent molecules, supramolecular materials, conjugated polymers, and metal-organic frameworks (MOFs). (ii) To illustrate the design and synthetic strategies to create specific binding and high affinity of I^- ions which could help minimize negative consequences associated with its large size and high polarizability. (iii) The challenges associated with sensitivity and selectivity of I^- ions in aqueous and real samples. The probable future aspects concerning the optical chemical detection of I^- ions have also been discussed in detail.

Solanum tuberosum Leaf Extract Templated Synthesis of Co3O4 Nanoparticles for Electrochemical Sensor and Antibacterial Applications

Green synthesis of metal oxide nanoparticles (NPs) is a viable alternative methodology because of cost-effective and availability of environmentally friendly templates for desired application, which has attracted the attention of researchers in recent years. In the present study, Co3O4 NPs were synthesized in various volume ratios in the presence of Solanum tuberosum leaf extract as a template. The synthesized Co3O4 NPs were characterized by X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), surface area electron diffraction (SAED), UV-Vis diffuse reflectance spectroscopy (UV-DRS), and Fourier transform infrared (FTIR) spectroscopy. XRD analysis found that the average crystalline sizes for the 1 : 2, 1 : 1, and 2 : 1 volume ratios was 25.83, 21.05, and 27.98 nm, respectively. SEM-EDX and TEM analyses suggest that the green-synthesized Co3O4 NPs are spherical in shape without the presence of impurities. The band gap E g values of the 1 : 2, 1 : 1, and 2 : 1 volume ratios of Co3O4 NPs were found to be 1.83, 1.77, and 2.19 eV, respectively. FTIR analysis confirmed the presence of various bioactive ingredients within the leaf extract of Solanum tuberosum. Co3O4 NPs-modified electrodes showed better sensing capability towards ascorbic acid and citric acid due to enhanced electron transfer kinetics. Among three volume ratios (1 : 2, 1 : 1, and 2 : 1) of Co3O4 nanoelectrodes, 1 : 1 and 2 : 1 were identified as the best performing nanoelectrodes. This is possibly due to the high catalytic behavior and the more homogenized surface structure. Co3O4 (1 : 2) nanodrug showed the enhanced antibacterial activity (16 mm) towards S. aureus which is attributed to the formation of enhanced reactive oxygen species (ROS).

Histone H3 lysine-trimethylation markers are decreased by recombinant methioninase and increased by methotrexate at concentrations which inhibit methionine-addicted osteosarcoma cell proliferation

Methionine addiction is a fundamental and general hallmark of cancer cells, which require exogenous methionine, despite their ability to synthesize normal amounts of methionine from homocysteine. In contrast, methionine-independent normal cells do not require exogenous methionine in the presence of a methionine precursor. The methionine addiction of cancer cells is due to excess transmethylation reactions. We have previously shown that histone H3 lysine marks are over-methylated in cancer cells and the over-methylation is unstable when the cancer cells are restricted of methionine. In the present study, we show that methionine-addicted osteosarcoma cells are sensitive to both methotrexate (MTX) and recombinant methioninase (rMETase), but they affect histone H3 lysine-methylation in the opposite direction. Concentrations of MTX and rMETase, which inhibit osteosarcoma cells viability to 20%, had opposing effects on the status of histone methylation of H3K9me3 and H3K27me3. rMETase significantly decreased the amount of H3K9me3 and H3K27me3. In contrast, MTX significantly increased the amount of H3K9me and H3K27me3. The results suggest that increase or decrease in these methylated histone lysine marks is associated with proliferation arrest of methionine-addicted osteosarcoma.

•

Osteosarcoma cells are sensitive to both methotrexate and recombinant methioninase.

•

MTX increased the amount of H3K9me and H3K27me3.

•

RMETase decreased the amount of H3K9me3 and H3K27me3.

•

Increase/decrease in H3K9me3 and H3K27me3 is associated with proliferation arrest.

Anion Binding Studies of Urea and Thiourea Functionalized Molecular Clefts

Two rationally designed 4-nitrophenyl-based molecular clefts functionalized with thiourea (L₁) and urea (L₂) have been synthesized and studied for a variety of anions by UV-Vis and colorimetric techniques in DMSO. Results from the binding studies suggest that both L₁ and L₂ bind halides showing the order: fluoride > chloride > bromide > iodide; and oxoanions showing the order: dihydrogen phosphate > hydrogen sulfate > nitrate > perchlorate. Each receptor has been shown to form a 1:1 complex with an anion via hydrogen bonding interactions, displaying distinct color change for fluoride and dihydrogen phosphate in solution. As compared to the urea-based receptor L₂, the thiourea-based receptor L₁ exhibits stronger affinity for anions due the presence of more acidic thiourea functional groups.

Chemosensing of neurotransmitters with selectivity and naked eye detection of l-DOPA based on fluorescent Zn(ii)-terpyridine bearing boronic acid complexes

A new range of fluorescent Zn(ii)-terpyridine complexes are described and studied in-depth as chemosensors for catecholamine-based neurotransmitters in pure water.

Optical sensing of anions by macrocyclic and interlocked hosts

This review summarises recent developments in the use of macrocyclic and mechanically-interlocked host molecules as optical sensors for anions.

Molecular recognition and sensing of dicarboxylates and dicarboxylic acids

The recognition and detection of dicarboxylic acids and dicarboxylates is of significance for a wide variety of applications, including medical diagnosis, monitoring of health and of environmental contaminants, and in industry. Hence small molecule receptors and sensors for dicarboxylic acids and dicarboxylates have great potential for applications in these fields. This review outlines the challenges faced in the recognition and detection of these species, strategies that have been used to obtain effective and observable interactions with dicarboxylic acids and dicarboxylates, and progress made in this field in the period from 2014 to 2020.

High-Performance Intensiometric Direct- and Inverse-Response Genetically Encoded Biosensors for Citrate

Motivated by the growing recognition of citrate as a central metabolite in a variety of biological processes associated with healthy and diseased cellular states, we have developed a series of high-performance genetically encoded citrate biosensors suitable for imaging of citrate concentrations in mammalian cells. The design of these biosensors was guided by structural studies of the citrate-responsive sensor histidine kinase and took advantage of the same conformational changes proposed to propagate from the binding domain to the catalytic domain. Following extensive engineering based on a combination of structure guided mutagenesis and directed evolution, we produced an inverse-response biosensor (ΔF/F _min ≈ 18) designated Citroff1 and a direct-response biosensor (ΔF/F _min ≈ 9) designated Citron1. We report the X-ray crystal structure of Citron1 and demonstrate the utility of both biosensors for qualitative and quantitative imaging of steady-state and pharmacologically perturbed citrate concentrations in live cells.

A Copper(II) Macrocycle Complex for Sensing Biologically Relevant Organic Anions in a Competitive Fluorescence Assay: Oxalate Sensor or Urate Sensor?

Fluorescence sensing of oxalate has garnered some attention in the past two decades as a result of this anion's prominence and impact on society. Previous work on oxalate sensors and other divalent anion sensors has led to the conclusion that the sensors are selective for the anion under investigation. However, sensor selectivity is often determined by testing against a relatively small array of "guest" molecules or analytes and studies often exclude potentially interfering compounds. For example, studies on oxalate sensors have excluded compounds such as citrate and urate, which are anions in the biological matrices where oxalate is measured (e.g., urine, blood, and bacterial lysate). In the present study, we reassessed the selectivity of a dinuclear copper(II) macrocycle (Cu₂L) in an eosin Y displacement assay using biologically relevant anions. Although previously reported as selective for oxalate, we found greater indicator displacement (fluorescence response) for urate and oxaloacetate and a significant response to citrate. These anions are larger than oxalate and do not appear to fit into the putative binding pocket of Cu₂L. Consistent with previous reports, Cu₂L did not release eosin Y in the presence of several other dicarboxylates, including adipate, glutarate, malate (except at 10 mM), fumarate, succinate, or malonate (except at 10 mM), and the monocarboxylate acetate. This was demonstrated by the failure of the anions to reverse eosin Y quenching by Cu₂L. We also assessed, for the first time, other monocarboxylates, including butyrate, pyruvate, lactate, propionate, and formate. None of these anions were able to displace eosin Y, indicating no interaction with Cu₂L that interfered with the eosin Y binding site. Single-crystal X-ray crystallography revealed that nonselective binding of the anions is likely partly caused by readily accessible copper(II) ions on the external surface of Cu₂L. In addition, π-π stacking of urate with the aromatic groups of Cu₂L cannot be ruled out as a contributor to binding. We conclude that Cu₂L is not suitable for oxalate sensing in a biological matrix unless interfering compounds are selectively removed or masked.

Dinuclear complexes of Mn, Co, Zn and Cd assembled with 1,4-cyclohexanedicarboxylate: synthesis, crystal structures and acetonitrile fluorescence sensing properties

Selective and reversible fluorescence sensing of acetonitrile in water by [Cd₂(H₂O)₂(chdc)₂(bipy)₂]·H₂O with a detection limit of 1.1 × 10⁻⁶ M.

Current Advancements in Transdermal Biosensing and Targeted Drug Delivery

In this manuscript, recent advancements in the area of minimally-invasive transdermal biosensing and drug delivery are reviewed. The administration of therapeutic entities through the skin is complicated by the stratum corneum layer, which serves as a barrier to entry and retards bioavailability. A variety of strategies have been adopted for the enhancement of transdermal permeation for drug delivery and biosensing of various substances. Physical techniques such as iontophoresis, reverse iontophoresis, electroporation, and microneedles offer (a) electrical amplification for transdermal sensing of biomolecules and (b) transport of amphiphilic drug molecules to the targeted site in a minimally invasive manner. Iontophoretic delivery involves the application of low currents to the skin as well as the migration of polarized and neutral molecules across it. Transdermal biosensing via microneedles has emerged as a novel approach to replace hypodermic needles. In addition, microneedles have facilitated minimally invasive detection of analytes in body fluids. This review considers recent innovations in the structure and performance of transdermal systems.