One step fabrication of Silicon nanocones with wide-angle enhanced light absorption

Fabrication of crystalline silicon nanowires coated with graphene from graphene oxide on amorphous silicon substrate using excimer laser

In this work, we report a single-step graphene-coated crystalline silicon nanowires (SiNWs) manufacturing technique. We report a one-step fabrication technique of SiNWscoated reduced graphene oxide using a krypton fluoride (KrF) excimer laser. The SiNWs have been manufactured by redistributing the silicon mass within the sample without etching any of the deposited amorphous silicon (a-Si) and then adding a synthesized graphene oxide suspension using the modified Hummers' method. The process is optimized to ensure that the graphene is completely reduced and that the crystalline nanowires are formed. In order to allow full control of the dimension of the generated nanowires, the properties of the excimer laser have been investigated. Additionally, graphene-coated Si nanowires have also been synthesized to be used for gas-sensing applications in the future. In this work, we are eviting the repetition of the previously published work by the same research group for the sake of brevity. But the reader can refer to the previously published work on the study of the effect of different parameters on the SiNWs growth like the study of the effect of changing the normalized frequency on the size of the grown SiNWs in terms of length and diameter as well as other parameters mentioned in the previously published work in the references.

On-Chip Monolithically Integrated Ultraviolet Low-Threshold Plasmonic Metal-Semiconductor Heterojunction Nanolasers

The metal-semiconductor heterojunction is imperative for the realization of electrically driven nanolasers for chip-level platforms. Progress in developing such nanolasers has hitherto rarely been realized, however, because of their complexity in heterojunction fabrication and the need to use noble metals that are incompatible with microelectronic manufacturing. Most plasmonic nanolasers lase either above a high threshold (101 -103  MW cm-2 ) or at a cryogenic temperature, and lasing is possible only after they are removed from the substrate to avoid the large ohmic loss and the low modal reflectivity, making monolithic fabrication impossible. Here, for the first time, record-low-threshold, room-temperature ultraviolet (UV) lasing of plasmon-coupled core-shell nanowires that are directly grown on silicon is demonstrated. The naturally formed core-shell metal-semiconductor heterostructure of the nanowires leads to a 100-fold improvement in growth density over previous results. This unprecedentedly high nanowire density creates intense plasmonic resonance, which is outcoupled to the resonant Fabry-Pérot microcavity. By boosting the emission strength by a factor of 100, the hybrid photonic-plasmonic system successfully facilitates a record-low laser threshold of 12 kW cm-2 with a spontaneous emission coupling factor as high as ≈0.32 in the 340-360 nm range. Such architecture is simple and cost-competitive for future UV sources in silicon integration.

Light-Trapping Electrode for the Efficiency Enhancement of Bifacial Perovskite Solar Cells

Antireflection and light-trapping coatings are important parts of photovoltaic architectures, which enable the reduction of parasitic optical losses, and therefore increase the power conversion efficiency (PCE). Here, we propose a novel approach to enhance the efficiency of perovskite solar cells using a light-trapping electrode (LTE) with non-reciprocal optical transmission, consisting of a perforated metal film covered with a densely packed array of nanospheres. Our LTE combines charge collection and light trapping, and it can replace classical transparent conducting oxides (TCOs) such as ITO or FTO, providing better optical transmission and conductivity. One of the most promising applications of our original LTE is the optimization of efficient bifacial perovskite solar cells. We demonstrate that with our LTE, the short-circuit current density and fill factor are improved for both front and back illumination of the solar cells. Thus, we observe an 11% improvement in the light absorption for the monofacial PSCs, and a 15% for the bifacial PSCs. The best theoretical results of efficiency for our PSCs are 27.9% (monofacial) and 33.4% (bifacial). Our study opens new prospects for the further efficiency enhancement for perovskite solar cells.

Bifacial Diffuse Absorptance of Semitransparent Microstructured Perovskite Solar Cells

An optical radiometry technique enabling simultaneous transmittance and reflectance measurements from both sides of a device was used to investigate bifacial diffuse absorptance of neutral-colored semitransparent perovskite solar cells based on a thin film of microsized perovskite islands. In such microstructured solar cells, diffuse irradiance was more effectively absorbed than direct irradiance at near-normal incidence, in contrast to reference solar cells comprising a continuous perovskite thin film. Experimental findings were discussed in ray-optic approximation in relation to the surface texture of the active layer, highlighting the role of light trapping. This absorptance spectroscopy technique is envisaged to find wide applicability to bifacial solar cells for building-integrated photovoltaics and other bifacial light-harvesting systems.