1
|
Cyr JA, Burdett C, Pürstl JT, Thompson RP, Troughton SC, Sinha S, Best SM, Cameron RE. Characterizing collagen scaffold compliance with native myocardial strains using an ex-vivo cardiac model: The physio-mechanical influence of scaffold architecture and attachment method. Acta Biomater 2024; 184:239-253. [PMID: 38942187 DOI: 10.1016/j.actbio.2024.06.031] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/09/2024] [Revised: 05/30/2024] [Accepted: 06/21/2024] [Indexed: 06/30/2024]
Abstract
Applied to the epicardium in-vivo, regenerative cardiac patches support the ventricular wall, reduce wall stresses, encourage ventricular wall thickening, and improve ventricular function. Scaffold engraftment, however, remains a challenge. After implantation, scaffolds are subject to the complex, time-varying, biomechanical environment of the myocardium. The mechanical capacity of engineered tissue to biomimetically deform and simultaneously support the damaged native tissue is crucial for its efficacy. To date, however, the biomechanical response of engineered tissue applied directly to live myocardium has not been characterized. In this paper, we utilize optical imaging of a Langendorff ex-vivo cardiac model to characterize the native deformation of the epicardium as well as that of attached engineered scaffolds. We utilize digital image correlation, linear strain, and 2D principal strain analysis to assess the mechanical compliance of acellular ice templated collagen scaffolds. Scaffolds had either aligned or isotropic porous architecture and were adhered directly to the live epicardial surface with either sutures or cyanoacrylate glue. We demonstrate that the biomechanical characteristics of native myocardial deformation on the epicardial surface can be reproduced by an ex-vivo cardiac model. Furthermore, we identified that scaffolds with unidirectionally aligned pores adhered with suture fixation most accurately recapitulated the deformation of the native epicardium. Our study contributes a translational characterization methodology to assess the physio-mechanical performance of engineered cardiac tissue and adds to the growing body of evidence showing that anisotropic scaffold architecture improves the functional biomimetic capacity of engineered cardiac tissue. STATEMENT OF SIGNIFICANCE: Engineered cardiac tissue offers potential for myocardial repair, but engraftment remains a challenge. In-vivo, engineered scaffolds are subject to complex biomechanical stresses and the mechanical capacity of scaffolds to biomimetically deform is critical. To date, the biomechanical response of engineered scaffolds applied to live myocardium has not been characterized. In this paper, we utilize optical imaging of an ex-vivo cardiac model to characterize the deformation of the native epicardium and scaffolds attached directly to the heart. Comparing scaffold architecture and fixation method, we demonstrate that sutured scaffolds with anisotropic pores aligned with the native alignment of the superficial myocardium best recapitulate native deformation. Our study contributes a physio-mechanical characterization methodology for cardiac tissue engineering scaffolds.
Collapse
Affiliation(s)
- Jamie A Cyr
- Department of Materials Science & Metallurgy Cambridge University 27 Charles Babbage Road, Cambridge CB3 0FS, UK.
| | - Clare Burdett
- Department of Materials Science & Metallurgy Cambridge University 27 Charles Babbage Road, Cambridge CB3 0FS, UK
| | - Julia T Pürstl
- Department of Materials Science & Metallurgy Cambridge University 27 Charles Babbage Road, Cambridge CB3 0FS, UK
| | - Robert P Thompson
- Department of Materials Science & Metallurgy Cambridge University 27 Charles Babbage Road, Cambridge CB3 0FS, UK
| | - Samuel C Troughton
- Department of Materials Science & Metallurgy Cambridge University 27 Charles Babbage Road, Cambridge CB3 0FS, UK
| | - Sanjay Sinha
- Wellcome-MRC Cambridge Stem Cell Institute, Cambridge University, Jeffrey Cheah Biomedical Centre, Puddicombe Way, Cambridge CB2 0AW, UK
| | - Serena M Best
- Department of Materials Science & Metallurgy Cambridge University 27 Charles Babbage Road, Cambridge CB3 0FS, UK.
| | - Ruth E Cameron
- Department of Materials Science & Metallurgy Cambridge University 27 Charles Babbage Road, Cambridge CB3 0FS, UK.
| |
Collapse
|
2
|
Cyr JA, Colzani M, Bayraktar S, Köhne M, Bax DV, Graup V, Farndale R, Sinha S, Best SM, Cameron RE. Extracellular macrostructure anisotropy improves cardiac tissue-like construct function and phenotypic cellular maturation. BIOMATERIALS ADVANCES 2023; 155:213680. [PMID: 37944449 DOI: 10.1016/j.bioadv.2023.213680] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Revised: 10/02/2023] [Accepted: 10/30/2023] [Indexed: 11/12/2023]
Abstract
Regenerative cardiac tissue is a promising field of study with translational potential as a therapeutic option for myocardial repair after injury, however, poor electrical and contractile function has limited translational utility. Emerging research suggests scaffolds that recapitulate the structure of the native myocardium improve physiological function. Engineered cardiac constructs with anisotropic extracellular architecture demonstrate improved tissue contractility, signaling synchronicity, and cellular organization when compared to constructs with reduced architectural order. The complexity of scaffold fabrication, however, limits isolated variation of individual structural and mechanical characteristics. Thus, the isolated impact of scaffold macroarchitecture on tissue function is poorly understood. Here, we produce isotropic and aligned collagen scaffolds seeded with embryonic stem cell derived cardiomyocytes (hESC-CM) while conserving all confounding physio-mechanical features to independently assess the effects of macroarchitecture on tissue function. We quantified spatiotemporal tissue function through calcium signaling and contractile strain. We further examined intercellular organization and intracellular development. Aligned tissue constructs facilitated improved signaling synchronicity and directional contractility as well as dictated uniform cellular alignment. Cells on aligned constructs also displayed phenotypic and genetic markers of increased maturity. Our results isolate the influence of scaffold macrostructure on tissue function and inform the design of optimized cardiac tissue for regenerative and model medical systems.
Collapse
Affiliation(s)
- Jamie A Cyr
- Department of Materials Science & Metallurgy, Cambridge University, 27 Charles Babbage Road, Cambridge CB3 0FS, UK
| | - Maria Colzani
- Wellcome-MRC Cambridge Stem Cell Institute, Cambridge University, Jeffrey Cheah Biomedical Centre, Puddicombe Way, Cambridge CB2 0AW, UK
| | - Semih Bayraktar
- Wellcome-MRC Cambridge Stem Cell Institute, Cambridge University, Jeffrey Cheah Biomedical Centre, Puddicombe Way, Cambridge CB2 0AW, UK
| | - Maria Köhne
- Wellcome-MRC Cambridge Stem Cell Institute, Cambridge University, Jeffrey Cheah Biomedical Centre, Puddicombe Way, Cambridge CB2 0AW, UK
| | - Daniel V Bax
- Department of Materials Science & Metallurgy, Cambridge University, 27 Charles Babbage Road, Cambridge CB3 0FS, UK
| | - Vera Graup
- Department of Materials Science & Metallurgy, Cambridge University, 27 Charles Babbage Road, Cambridge CB3 0FS, UK
| | - Richard Farndale
- Department of Biochemistry, Cambridge University, Hopkins Building Tennis Court Road, Cambridge CB2 1QW, UK
| | - Sanjay Sinha
- Wellcome-MRC Cambridge Stem Cell Institute, Cambridge University, Jeffrey Cheah Biomedical Centre, Puddicombe Way, Cambridge CB2 0AW, UK.
| | - Serena M Best
- Department of Materials Science & Metallurgy, Cambridge University, 27 Charles Babbage Road, Cambridge CB3 0FS, UK.
| | - Ruth E Cameron
- Department of Materials Science & Metallurgy, Cambridge University, 27 Charles Babbage Road, Cambridge CB3 0FS, UK.
| |
Collapse
|
3
|
Bonnet B, Tabiai I, Rakovich G, Gosselin FP, Villemure I. Air leaks: Stapling affects porcine lungs biomechanics. J Mech Behav Biomed Mater 2021; 125:104883. [PMID: 34678619 DOI: 10.1016/j.jmbbm.2021.104883] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2020] [Revised: 05/28/2021] [Accepted: 10/02/2021] [Indexed: 11/19/2022]
Abstract
During thoracic operations, surgical staplers resect cancerous tumors and seal the spared lung. However, post-operative air leaks are undesirable clinical consequences: staple legs wound lung tissue. Subsequent to this trauma, air leaks from lung tissue into the pleural space. This affects the lung's physiology and patients' recovery. The objective is to biomechanically and visually characterize porcine lung tissue with and without staples in order to gain knowledge on air leakage following pulmonary resection. Therefore, a syringe pump filled with air inflates and deflates eleven porcine lungs cyclically without exceeding 10 cmH2O of pressure. Cameras capture stereo-images of the deformed lung surface at regular intervals while a microcontroller simultaneously records the alveolar pressure and the volume of air pumped. The raw images are then used to compute tri-dimensional displacements and strains with the Digital Image Correlation method (DIC). Air bubbles originated at staple holes of inner row from exposed porcine lung tissue due to torn pleural on costal surface. Compared during inflation, left upper or lower lobe resections have similar compliance (slope of the pressure vs volume curve), which are 9% lower than healthy lung compliance. However, lower lobes statistically burst at lower pressures than upper lobes (p-value<0.046) in ex vivo conditions confirming previous clinical in vivo studies. In parallel, the lung deformed mostly in the vicinity of staple holes and presented maximum shear strain near the observed leak location. To conclude, a novel technique DIC provided concrete evidence of the post-operative air leaks biomechanics. Further studies could investigate causal relationships between the mechanical parameters and the development of an air leak.
Collapse
Affiliation(s)
- Bénédicte Bonnet
- Department of Mechanical Engineering, Polytechnique Montréal, 2500 Chemin de Polytechnique, Montreal, QC, H3T 1J4, Canada.
| | - Ilyass Tabiai
- Department of Mechanical Engineering, Polytechnique Montréal, 2500 Chemin de Polytechnique, Montreal, QC, H3T 1J4, Canada.
| | - George Rakovich
- Department of Thoracic Surgery, University of Montréal, 2900 Boulevard Edouard-Montpetit, Montreal, QC, H3T 1J4, Canada.
| | - Frédérick P Gosselin
- Department of Mechanical Engineering, Polytechnique Montréal, 2500 Chemin de Polytechnique, Montreal, QC, H3T 1J4, Canada.
| | - Isabelle Villemure
- Department of Mechanical Engineering, Polytechnique Montréal, 2500 Chemin de Polytechnique, Montreal, QC, H3T 1J4, Canada.
| |
Collapse
|
4
|
Skin-conformable printed supercapacitors and their performance in wear. Sci Rep 2020; 10:15194. [PMID: 32939011 PMCID: PMC7495439 DOI: 10.1038/s41598-020-72244-8] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2020] [Accepted: 08/27/2020] [Indexed: 11/08/2022] Open
Abstract
Wearable sensors and electronic systems are of great interest these days, but their viability depends on the availability of compatible energy storage solutions. Such sensors can either be integrated into clothing or attached directly to the skin, each case presenting a different set of requirements for the devices. In this work, we examine the performance of printed supercapacitors while attached to the skin. The devices are manufactured from benign materials, such as water, carbon and sodium chloride, and worn on the forearm or chest for 24 h for durability testing. The supercapacitors exhibit excellent mechanical durability and stay well attached under all test conditions. Electrically, the supercapacitors exhibit reliable capacitive function throughout the test period; other key parameters such as equivalent series resistance and leakage current are affected but to a minimal extent. The movement and deformation of the supercapacitor show good compatibility with the skin, as shown by the Digital Image Correlation full field strain measurements on and around the capacitor. The supercapacitors deform with the skin and do not hinder normal movement or function.
Collapse
|
5
|
Soltani A, Lahti J, Järvelä K, Laurikka J, Kuokkala VT, Hokka M. Characterization of the anisotropic deformation of the right ventricle during open heart surgery. Comput Methods Biomech Biomed Engin 2019; 23:103-113. [PMID: 31847587 DOI: 10.1080/10255842.2019.1703133] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
Abstract
Digital Image Correlation (DIC) was used for studying the anisotropic behavior of the thin walled right ventricle of the human heart. Strains measured with Speckle Tracking Echocardiography (STE) were compared with the DIC data. Both DIC and STE were used to measure longitudinal strains of the right ventricle in the beginning of an open-heart surgery as well as after the cardiopulmonary bypass. Based on the results, the maximum end-systolic strains obtained with the DIC and STE change similarly during the surgery with less than 10% difference. The difference is largely due to the errors in matching the longitudinal direction in the two methods, sensitivity of the measurement to the positioning of the virtual extensometer of in both STE and DIC, and physiological difference of the measurements as the DIC measures the top surface of the heart whereas the STE obtains the data from below. The anisotropy of the RV was measured using full field principal strains acquired from the DIC displacement fields. The full field principal strains cover the entire region of interest instead of just two points as the virtual extensometer approach used by the STE. The principal strains are not direction dependent measures, and therefore are more independent of the anatomy of the patient and the exact positioning of the virtual strain gage or the STE probe. The results show that the longitudinal strains alone are not enough to fully characterize the behavior of the heart, as the deformation of the heart can be very anisotropic, and the anisotropy changes during the surgery, and from patient to patient.
Collapse
Affiliation(s)
- A Soltani
- Tampere University, Faculty of Engineering and Natural Sciences, Tampere, Finland
| | - J Lahti
- Hospital Heart Center, Tampere University, Tampere, Finland
| | - K Järvelä
- Hospital Heart Center, Tampere University, Tampere, Finland
| | - J Laurikka
- Hospital Heart Center, Tampere University, Tampere, Finland.,Faculty of Medicine and Life Sciences, Tampere University, Tampere, Finland
| | - V-T Kuokkala
- Tampere University, Faculty of Engineering and Natural Sciences, Tampere, Finland
| | - M Hokka
- Tampere University, Faculty of Engineering and Natural Sciences, Tampere, Finland
| |
Collapse
|
6
|
Ferraiuoli P, Fixsen LS, Kappler B, Lopata RGP, Fenner JW, Narracott AJ. Measurement of in vitro cardiac deformation by means of 3D digital image correlation and ultrasound 2D speckle-tracking echocardiography. Med Eng Phys 2019; 74:146-152. [PMID: 31615731 DOI: 10.1016/j.medengphy.2019.09.021] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2019] [Revised: 07/26/2019] [Accepted: 09/29/2019] [Indexed: 11/16/2022]
Abstract
Ultrasound-based 2D speckle-tracking echocardiography (US-2D-STE) is increasingly used to assess the functionality of the heart. In particular, the analysis of cardiac strain plays an important role in the identification of several cardiovascular diseases. However, this imaging technique presents some limitations associated with its operating principle that result in low accuracy and reproducibility of the measurement. In this study, an experimental framework for multimodal strain imaging in an in vitro porcine heart was developed. Specifically, the aim of this work was to analyse displacement and strain in the heart by means of 3D digital image correlation (3D-DIC) and US-2D-STE. Over a single cardiac cycle, displacement values obtained from the two techniques were in strong correlation, although systematically larger displacements were observed with 3D-DIC. Notwithstanding an absolute comparison of the strain measurements was not possible to achieve between the two methods, maximum principal strain directions computed with 3D-DIC were consistent with the longitudinal and circumferential strain distribution measured with US-2D-STE. 3D-DIC confirmed its high repeatability in quantifying displacement and strain over multiple cardiac cycles, unlike US-2D-STE which is affected by accumulated errors over time (i.e. drift). To conclude, this study demonstrates the potential of 3D-DIC to perform dynamic measurement of displacement and strain during heart deformations and supports future applications of this method in ex vivo beating heart platforms, which replicate more fully the complex contraction of the heart.
Collapse
Affiliation(s)
- Paolo Ferraiuoli
- Mathematical Modelling in Medicine Group, Department of Infection, Immunity and Cardiovascular Disease, University of Sheffield, Sheffield, United Kingdom; Insigneo Institute for in silico medicine, University of Sheffield, Sheffield, United Kingdom.
| | - Louis S Fixsen
- Cardiovascular Biomechanics group, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, Netherlands
| | - Benjamin Kappler
- LifeTec Group B.V., Eindhoven, Netherlands; Amsterdam University Medical Center, Department Cardiothoracic Surgery, Amsterdam, Netherlands
| | - Richard G P Lopata
- Cardiovascular Biomechanics group, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, Netherlands
| | - John W Fenner
- Mathematical Modelling in Medicine Group, Department of Infection, Immunity and Cardiovascular Disease, University of Sheffield, Sheffield, United Kingdom; Insigneo Institute for in silico medicine, University of Sheffield, Sheffield, United Kingdom
| | - Andrew J Narracott
- Mathematical Modelling in Medicine Group, Department of Infection, Immunity and Cardiovascular Disease, University of Sheffield, Sheffield, United Kingdom; Insigneo Institute for in silico medicine, University of Sheffield, Sheffield, United Kingdom.
| |
Collapse
|
7
|
Ferraiuoli P, Kappler B, van Tuijl S, Stijnen M, de Mol BA, Fenner JW, Narracott AJ. Full-field analysis of epicardial strain in an in vitro porcine heart platform. J Mech Behav Biomed Mater 2019; 91:294-300. [DOI: 10.1016/j.jmbbm.2018.11.025] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/11/2018] [Revised: 11/24/2018] [Accepted: 11/26/2018] [Indexed: 01/29/2023]
|