New Approach in Ulcer Prevention and Wound Healing Treatment using Doxycycline and Amoxicillin/LDH Nanocomposites

Analysis of the transmission chain of carbapenem-resistant Enterobacter cloacae complex infections in clinical, intestinal and healthcare settings in Zhejiang province, China (2022-2023)

Considerable attention is given to intensive care unit-acquired infections; however, research on the transmission dynamics of multichain carbapenemase-resistant Enterobacter cloacae complex (CRECC) outbreaks remains elusive. A total of 118 non-duplicated CRECC strains were isolated from the clinical, intestinal, and hospital sewage samples collected from Zhejiang province of China during 2022-2023. A total of 64 CRECC strains were isolated from the hospital sewage samples, and their prevalence increased from 10.0 % (95 % confidence interval, CI = 0.52-45.8 %) in 2022 to 63.6 % (95 % CI = 31.6-87.6 %) in 2023. Species-specific identification revealed that Enterobacter hormaechei was the predominant CRECC species isolated in this study (53.4 %, 95 % CI = 44.0-62.6 %). The antimicrobial susceptibility profiles indicated that all 118 CRECC strains conferred high-level resistance to β-lactam antibiotics, ceftacillin/avibactam, and polymyxin. Furthermore, all CRECC strains exhibited resistance to β-lactams, quinolones, and fosfomycin, with a higher colistin resistance rate observed in the hospital sewage samples (67.2 %, 95 % CI = 54.2-78.1 %). Several antibiotic resistance genes were identified in CRECC strains, including Class A carbapenemases (blaKPC-2) and Class B carbapenemases (blaNDM-1/blaIMP), but not Class D carbapenemases. The WGS analysis showed that the majority of the CRECC strains carried carbapenemase-encoding genes, with blaNDM-1 being the most prevalent (86.9 %, 95 % CI = 77.4-92.9 %). Furthermore, sequence typing revealed that the isolated CRECC strains belonged to diverse sequence types (STs), among which ST418 was the most prevalent blaNDM-positive strain. The high risk of carbapenemase-producing ST418 E. hormaechei and the blaNDM-harboring IncFIB-type plasmid (81.4 %, 95 % CI = 72.9-87.7 %) were detected and emphasized in this study. This study provides valuable insights into the prevalence, antimicrobial resistance, genomic characteristics, and plasmid analysis of CRECC strains in diverse populations and environments. The clonal relatedness analysis showed sporadic clonal transmission of ST418 E. hormaechei strains, supporting inter-hospital transmission.

Development strategy of novel drug formulations for the delivery of doxycycline in the treatment of wounds of various etiologies

Doxycycline hyclate (DOXH) is a broad-spectrum antibiotic derived synthetically from tetracycline. Despite its use in clinical practice for more than 40 years, DOXH remains an effective antibiotic with retained activity. The potential advantages of DOXH for wound healing therapy include its mechanisms of action, such as anti-inflammatory effects, antioxidant properties, modulation of cellular processes, stimulation of collagen synthesis, and antimicrobial activity. As current standards of care aim to improve wound healing by promoting rapid closure, a relevant direction is the development of novel DOXH formulations for parenteral delivery that enhance both skin regeneration and control of infectious conditions. Oral delivery is the most common and commercially available route for administering DOXH therapeutic agents. However, parenteral delivery of DOXH, where the antibiotic substance is not in a solid state (as in powdered or compressed solid form) but rather dissolved in any carrier, presents challenges regarding DOX solubility and the stability of DOXH solutions, which are major factors complicating the development of new formulations for parenteral administration. This review discusses the achievements in research strategies and the development of new pharmaceutical formulations for the delivery of doxycycline in the treatment of wounds of various etiologies.

Airbrushed nanofibers with bioactive core and antibacterial shell for wound healing application

Acute and chronic wounds are vulnerable to infection and delayed healing and require critical care and advanced wound protection. To overcome the challenges, dual therapy of antibacterial and growth factors will be a novel wound care strategy. The present study explores airbrushed core-shell nanofiber for dual delivery of epidermal growth factor (EGF) and amoxicillin (AMOX) in a sustained manner. A blend of polycaprolactone (PCL)-polyethylene oxide (PEO) was used to prepare the shell compartment for amoxicillin loading and poly-DL-lactide (PDLLA) core for EGF loading by using a customized airbrush setup. Characterization result shows a uniform distribution of nanofibers ranging between 200 and 500 nm in diameter. Amoxicillin loading in the shell compartment offers an initial burst release followed by a sustained release for up to 14 days. Whereas EGF in the core part shows a continuous sustained release throughout the release study.In-vitrostudy indicates the biocompatibility of EGF-AMOX loaded core-shell nanofibers with human dermal fibroblast cell (HDF) cells and a higher cellular proliferation compared to control samples. Gene expression data show an increase in fold change of collagen I and tropoelastin expression, indicating the regenerative properties of EGF-AMOX encapsulated nanofiber. The combination of bioactive core (EGF) and antibiotic shell (amoxicillin) in an airbrushed nanofibrous scaffold is a novel approach, which is the first time explored to deliver sustainable therapy to treat skin wounds. Our results demonstrate that PCL-PEO-Amoxicillin/PDLLA-EGF-loaded core-shell nanofibers are promising dual therapy scaffolds to deliver effective skin wound care, with the possibility of direct deposition on the wound.

A New Cu/Fe Layer Double Hydroxide Nanocomposite Exerts Anticancer Effects against PC-3 Cells by Inducing Cell Cycle Arrest and Apoptosis

Prostate cancer treatment poses significant challenges due to its varying aggressiveness, potential for metastasis, and the complexity of treatment options. Balancing the effectiveness of therapies, minimizing side effects, and personalizing treatment strategies are ongoing challenges in managing this disease. Significant advances in the use of nanotechnology for the treatment of prostate cancer with high specificity, sensitivity, and efficacy have recently been made. This study aimed to synthesize and characterize a novel Cu/Fe layer double hydroxide (LDH) nanocomposite for use as an anticancer agent to treat prostate cancer. Cu/Fe LDH nanocomposites with a molar ratio of 5:1 were developed using a simple co-precipitation approach. FT-IR, XRD, SEM, TEM, TGA, and zeta potential analyses confirmed the nanocomposite. Moreover, the MTT cell viability assay, scratch assay, and flow cytometry were utilized to examine the prospective anticancer potential of Cu/Fe LDH on a prostate cancer (PC-3) cell line. We found that Cu/Fe LDH reduced cell viability, inhibited cell migration, induced G1/S phase cell cycle arrest, and triggered apoptotic effect in prostate cancer cells. The findings also indicated that generating reactive oxygen species (ROS) formation could improve the biological activity of Cu/Fe LDH. Additionally, Cu/Fe LDH showed a good safety impact on the normal lung fibroblast cell line (WI-38). Collectively, these findings demonstrate that the Cu/Fe LDH nanocomposite exhibited significant anticancer activities against PC-3 cells and, hence, could be used as a promising strategy in prostate cancer treatment.

Topically Applied Biopolymer-Based Tri-Layered Hierarchically Structured Nanofibrous Scaffold with a Self-Pumping Effect for Accelerated Full-Thickness Wound Healing in a Rat Model

Wound healing has grown to be a significant problem at a global scale. The lack of multifunctionality in most wound dressing-based biopolymers prevents them from meeting all clinical requirements. Therefore, a multifunctional biopolymer-based tri-layered hierarchically nanofibrous scaffold in wound dressing can contribute to skin regeneration. In this study, a multifunctional antibacterial biopolymer-based tri-layered hierarchically nanofibrous scaffold comprising three layers was constructed. The bottom and the top layers contain hydrophilic silk fibroin (SF) and fish skin collagen (COL), respectively, for accelerated healing, interspersed with a middle layer of hydrophobic poly-3-hydroxybutyrate (PHB) containing amoxicillin (AMX) as an antibacterial drug. The advantageous physicochemical properties of the nanofibrous scaffold were estimated by SEM, FTIR, fluid uptake, contact angle, porosity, and mechanical properties. Moreover, the in vitro cytotoxicity and cell healing were assessed by MTT assay and the cell scratching method, respectively, and revealed excellent biocompatibility. The nanofibrous scaffold exhibited significant antimicrobial activity against multiple pathogenic bacteria. Furthermore, the in vivo wound healing and histological studies demonstrated complete wound healing in wounded rats on day 14, along with an increase in the expression level of the transforming growth factor-β1 (TGF-β1) and a decrease in the expression level of interleukin-6 (IL-6). The results revealed that the fabricated nanofibrous scaffold is a potent wound dressing scaffold, and significantly accelerates full-thickness wound healing in a rat model.

Cefotax-magnetic nanoparticles as an alternative approach to control Methicillin-Resistant Staphylococcus aureus (MRSA) from different sources

This study aimed to evaluate the efficacy of magnetic nanocomposite of cefotax against MRSA. A total of 190 samples were collected from milk, farm personnel and different environmental components from the dairy farm under the study to isolate S. aureus. Cefotax based magnetic nanoparticles was synthetized by the adsorption method and marked using Fourier-transform infrared spectrum (FT-IR), and X-ray diffraction (XRD), then it was characterized using Scanning and Transmission Electron Microscope (SEM and TEM). The obtained results revealed that number of positive samples of S. aureus isolation were 63 (33.1%), mainly from feed manger followed by milk machine swabs (60.0 and 53.3%, respectively) at X2 = 48.83 and P < 0.001. Obtained isolates were identified biochemically and by using molecular assays (PCR), also mec A gene responsible for resistance to cefotax was detected. Testing the sensitivity of 63 isolates of S. aureus showed variable degree of resistance to different tested antibiotics and significant sensitivity to cefotax based magnetic nanoparticles at P < 0.05. It was concluded that dairy environment might act a potential source for transmission of MRSA between human and animal populations. In addition, cefotax based magnetic nanoparticles verified an extreme antimicrobial efficacy against MRSA.

A tough synthetic hydrogel with excellent post-loading of drugs for promoting the healing of infected wounds in vivo

Bacterial infection is a major obstacle to the wound healing process. The hydrogel dressings with a simpler structure and good antibacterial and wound healing performance are appealing for clinical application. Herein, a robust hydrogel was synthesized from acrylamide (AM), acrylic acid (AA) and N,N'-methylene diacrylamide (MBA) via a redox initiating polymerization. The polymerization conditions were optimized to obtain the hydrogel with minimum unreacted monomers, which were 0.25% and 0.12% for AM and AA, respectively. The hydrogel had good mechanical strength, and could effectively resist damage by external forces and maintain a good macroscopic shape. It showed large water uptake capacity, and could post load a wide range of molecules via hydrogen bonding and electrostatic interaction. Loading of antibiotic doxycycline (DOX) enabled the hydrogel with good antibacterial activity against both Gram-positive bacteria and Gram-negative bacteria in vitro and in vivo. In a rat model of methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin defect wound, the DOX-loaded hydrogel showed good therapeutic effect. It could significantly promote the wound closure, increased the collagen coverage area, down-regulate the expressions of pro-inflammatory TNF-α and IL-1β factors, and up-regulate the expressions of anti-inflammatory IL-4 factor and CD31 neovascularization factor.

Effect of nano-chitosan and nano-doxycycline gel on healing of induced oral ulcer in rat model: histological and immunohistochemical study

OBJECTIVES

The aim of this study was to investigate the effect of nano-chitosan and nano-doxycycline gel on healing of oral ulcers.

METHODS

In this study, 37 rats were used, four of which acted as normal controls (group 1), while the remaining 33 were distributed into three groups, each with 11 rats. Oral ulcers were chemically induced in the labial mucosa, after which (group 2), ulcer group received no treatment, (group 3) received nano-chitosan gel, and (group 4) received nano-doxycycline gel. They were scarified after 14 days and histologically examined as well as immunostaining for vascular endothelial growth factor (VEGF) and proliferating cell nuclear antigen (PCNA).

RESULTS

The best clinical and histologic healing results were shown in nano-chitosan group, followed by nano-doxycycline group, while the ulcer group showed incomplete healing. This was confirmed by immunostaining as area % of VEGF and number PCNA were the highest in nano-chitosan group followed by nano-doxycycline group, then ulcer group.

CONCLUSION

Both nano-chitosan and nano-doxycycline gels improved the healing of chemically induced oral ulcers; however, nano-chitosan exhibited better healing outcomes.

CLINICAL RELEVANCE

Nano-chitosan and nano-doxycycline gels are both viable and safe alternatives to current ulcer treatments.

Carbopol-olive oil-based bigel drug delivery system of doxycycline hyclate for the treatment of acne

OBJECTIVE

The objective of this study was to prepare and evaluate the doxycycline hyclate containing bigel for the effective treatment of acne.

METHODS

Bigels are biphasic systems formed by water-based hydrogels and oil-based organogel. Carbopol 940 was used to prepare the hydrogel phase, whereas Span-60 and olive oil for the oleogel phase.

RESULTS

The microstructure of bigel confirmed the oil in water type emulsion formation. The average droplet size of formulations was found 15-50 µm, and a bell-shaped droplet distribution curve, rheological, or viscosity studies suggested that the consistency and stability of bigel decrease with high organogel concentration. Three formulations (F1, F2, and F3) of the different ratios of hydrogel:oleogel (60:40, 70:30, and 80:20) were prepared in which F1 was less stable compared to F2 and F3. The drug content of F2 and F3 was respectively 79.94 and 71.33%. Formulation F2 was found more effective as compared to F3 based on in vitro drug release studies. Bigel also showed better results during in vivo studies at the rabbit ear model, which reduce acne diameter up to 1.10 mm from 4.9 mm while gel reduced it up to 1.20 mm.

A dual enhanced anti-bacterial strategy based on high chlorin e6-loaded polyethyleneimine functionalized graphene

Bacterial infection has always been a long-term problem of human history and has nowadays became a severe threat to human health with the appearance of drug-resistant bacteria due to the abuse of antibiotics. In this study, a high chlorin e6 (Ce6) photosensitizer-loaded polyethyleneimine-functionalized graphene (PEI-G) nanocomposite (PEI-G@Ce6) was prepared. The loading capacity of Ce6 on PEI-G@Ce6 was approximately up to 32.91 wt%, which was higher than that of other nanomaterials. The as-prepared PEI-G@Ce6 not only improves the photostability of free photosensitizer Ce6 molecules but also maintains the ability of singlet oxygen generation. Based on the dual enhancement of the physical antibacterial effects of PEI-G and the photodynamic therapy (PDT) antibacterial effects of loaded photosensitizer Ce6, PEI-G@Ce6 exhibited enhanced antibacterial efficiency towards Staphylococcus aureus. Therefore, the present strategy provided an effective platform to improve antibacterial efficiency for the better treatment of wound infections.

Dual enhanced anti-bacterial strategy based on a high chlorin e6-loaded polyethyleneimine functionalized graphene nanomaterial.

Exploitation of new approach to control of environmental pathogenic bacteria causing bovine clinical mastitis using novel anti-biofilm nanocomposite

New approaches are required for prevention and control of biofilm-producing bacteria and consequently mitigating the health problems of bovine clinical mastitis. This work designed to determine prevalence rates of biofilm-producing bacteria that causing bovine clinical mastitis and evaluate the anti-biofilm effectiveness of novel nanocomposite of zinc-aluminum layered double hydroxide intercalated with gallic acid (GA) as chelating agent (Zn-Al LDH/GA) on the prevention and control of environmental pathogenic bacteria; Escherichia coli (E. coli), Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus), and Coagulase-negative staphylococci (CNS), besides Listeria monocytogenes (L. monocytogenes) and assess the ability to use as an antimicrobial agent, and/or sanitizer for milking equipment. All samples (n = 230) involved clinical mastitis cow's milk (n = 50) beside environmental samples (n = 180) were collected then examined for isolation and identification of bacterial pathogens. Zn-Al LDH/GA nanocomposite was synthesized using co-precipitation method, then characterized by Fourier-transform infrared spectroscopy (FT-IR); X-ray diffraction (XRD); field emission scanning electron microscopy (FESEM); high-resolution transmission electron microscopy (HRTEM); thermogravimetric analysis (TGA); differential thermal analysis (DTA); zeta potential; DLS analysis; and Brunauer, Emmett, and Teller (BET) surface area. The anti-biofilm activity of nanocomposite against mastitis-causing bacteria was detected using the broth micro-dilution and disc-diffusion assay. Results, the minimum concentration of Zn-Al LDH/GA that inhibited the growth of gram-positive and negative bacteria, were 312-625 and 5000 μg/mL, respectively. The LD₅₀ of Zn-Al LDH/GA was determined in mice at 1983.3 mg/kg b.wt. As a conclusion, Zn-Al LDH/GA nanocomposite proved its efficiency as an antimicrobial agent and/or sanitizer used for cleaning of milking equipment, due to it could inhibit the growth and multiplication of potentially pathogenic bacteria that causing clinical mastitis and its formation of biofilm on the milking equipment. Zn-Al LDH/GA was found to use under varying pH conditions compared with other commercial sanitizer used besides the formation of nanocomposite increases the material stability.

Amputation rate of diabetic foot ulcer and associated factors in diabetes mellitus patients admitted to Nekemte referral hospital, western Ethiopia: prospective observational study

BACKGROUND

Diabetes foot ulcer is a devastating and much-feared complication of diabetes. Diabetes foot ulcerations which developed gangrene can take weeks or months to heal and can sometimes not heal at all so that amputation for non-traumatic causes is a frequent outcome in the diabetic foot. Despite this, there is no finding on predictors of the amputation rate of diabetes foot ulcers in Ethiopia. Hence this study was aimed to identify factors associated with the amputation rate of diabetes foot ulcer patients in Nekemte referral hospital.

PATIENTS AND METHODS

A prospective observational study was conducted among adult diabetes foot ulcer patients admitted to Nekemte referral hospital from March 15 to June 15, 2018. A pus swab was obtained from the ulcers before any ulcer cleaning to conduct gram staining. The primary outcome was the amputation rate. Cox regression analysis was used to estimate the hazard ratios and time from study entry to healing was evaluated as censored event times by Kaplan-Meier curves.

RESULT

Over the study period, 115 diabetes foot ulcer patients were admitted to the NRH; of these patients, 64(55.65%) were males while the mean age of participants was 44.4 ± 14.7. A total of 34(29.57%) of the diabetes foot ulcer were overweight and 16(13.91%) were obese while the mean ± standard deviation of body mass index (BMI) was 24.94 ± 3.69 kg/m2 and a total of 56(48.69%) diabetic foot ulcer had a diabetic complication. Of patients with diabetic foot ulcer, 35(30.43%) were undergone lower extremity amputations (LEA). Patients who were prescribed with inappropriate antibiotics were unlikely to heal. A total of 18(46.15%) of the patients who were taken inappropriate antibiotics were healed whereas 21(53.85%) were not healed (P = 0.017). Besides, the higher the Wagner grade, the worse the outcome of healing. A total of 19(21.84%) and 16(57.14%) of patients with grade < 4 and grade ≥ 4, respectively, did not heal (P = 0.005).

CONCLUSION

The amputation rate of diabetes foot ulcers was rapid for patients prescribed inappropriate antibiotics and higher grades of the foot ulcer. Therefore, the presence of clinical pharmacists plays a pivotal role to promote the appropriate use of antibiotics and besides the daily care, special attention should be given for patients having an advanced grade of diabetes foot ulcer.

Chitosan Derivatives in Macromolecular Co-assembly Nanogels with Potential for Biomedical Applications

Maleoyl-chitosan/poly(aspartic acid) nanogels were developed and characterized in order to assess its suitability for biomedical applications. Thus, the physicochemical properties were investigated and correlated with the composition of the new structures. Dynamic light scattering measurements, correlated with transmission electron microscopy images, demonstrated that nanogels size distribution was narrow with average diameter between 186 and 246 nm, and presented positive zeta potential values. The sensitivity of nanogels at pH and temperature was also evaluated. Nanogels loaded with amoxicillin showed a controlled release profile dependent on nanogel content. The formulations loaded with amoxicillin had antibacterial properties, and the cytotoxicity tests indicated good in vivo biocompatibility. In conclusion, the new synthesized polyelectrolyte nanogels, which can provide a stable environment for the encapsulated drugs, can be used as a multifunctional platform for administration of antimicrobial agents from the spectrum of antibiotics that have a very poor biodistribution.

Nanomedicine in Healing Chronic Wounds: Opportunities and Challenges

The poor healing associated with chronic wounds affects millions of people worldwide through high mortality rates and associated costs. Chronic wounds present three main problems: First, the absence of a suitable environment to facilitate cell migration, proliferation, and angiogenesis; second, bacterial infection; and third, unbalanced and prolonged inflammation. Unfortunately, current therapeutic approaches have not been able to overcome these main issues and, therefore, have limited clinical success. Over the past decade, incorporating the unique advantages of nanomedicine into wound healing approaches has yielded promising outcomes. Nanomedicine is capable of stimulating various cellular and molecular mechanisms involved in the wound microenvironment via antibacterial, anti-inflammatory, and angiogenetic effects, potentially reversing the wound microenvironment from nonhealing to healing. This review briefly discusses wound healing mechanisms and pathophysiology and then highlights recent findings regarding the opportunities and challenges of using nanomedicine in chronic wound management.

Characterization of chitosan-lysine surfactant bioactive coating on silicone substrate

Chitosan (Chi) and anionic surfactant derived from lysine (77KS) were used to prepare a novel bioactive coating and as a drug delivery system for amoxicillin (AMOX) on a model polydimethylsiloxane (PDMS) surface. The bioactive coating was formulated as polyelectrolyte-surfactant complex (PESC). Aggregation behaviour between the cationic Chi and oppositely charged 77KS in bulk was analysed using turbidity and ζ-potential measurement. Furthermore, the adsorption and stability of the formulations were evaluated using quartz crystal microbalance with dissipation (QCM-D). The effect of the ionic strength and of the ultraviolet/ozone (UVO) activation of the PDMS films on the adsorption behaviour of the PESC complex was also examined. QCM-D monitoring showed stable adsorption of bare and AMOX-loaded complex on non-activated PDMS films, while the coating on UVO-activated PDMS samples desorbed after the rinsing step. Finally, X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed successful and homogenously distributed compounds.

Chemisorption and sustained release of cefotaxime between a layered double hydroxide and polyvinyl alcohol nanofibers for enhanced efficacy against second degree burn wound infection

Zn–Al layered double hydroxides (LDHs) were synthesized by a chemical method, while polyvinyl alcohol (PVA) nanofibers were fabricated by an electrospinning approach; we also synthesized Zn–Al LDH/cefotaxime (cefotax), Zn–Al LDH@PVA, and Zn–Al LDH/cefotax@PVA (LCP). Characterizations were performed by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, Brunauer–Emmett–Teller analysis, thermogravimetric-differential thermal analysis techniques, dynamic light scattering, X ray-florescence, and carbon, hydrogen, and nitrogen (CHN) analyses. The adsorption isotherm of cefotax and its entrapment percentage, release, and kinetics were also investigated. The results confirmed the elemental constituents of the mentioned formulas, which exhibited different degrees of crystallinity and different morphologies. Besides, these formulas were tested in vitro as antimicrobial agents and applied in vivo against second-degree wound burns induced in rats' skin. The adsorption of cefotax occurred chemically, and the experimental data were fitted with different isotherm models, where the Freundlich and Toth models gave the best fits. The entrapment percentage in LDH/cefotax was 77.41% and in LDH/cefotax@PVA, it was 67.83%. The sustained release of cefotax from LDH and LCP was attainable; the release percentages were 89.31% and 81.55% in up to 12 h, respectively. The release kinetics of cefotax from LDH fitted well with first-order kinetics, while that for LCP was parabolic. The formulas showed uneven antimicrobial effects against Gram-positive and Gram-negative bacteria; the best effect was exhibited by Zn–Al LDH/cefotax@PVA due to its sustained release. Finally, investigating the possibility of using these formulas in the clinical setting should be considered.

This study succeeded to formulate, characterize, and investigate cefotax release and kinetics, and to compare cetofax with other known antibacterial agents.

DFT study on MgAl-layered double hydroxides with different interlayer anions: structure, anion exchange, host–guest interaction and basic sites

The guest anions play a key role in the construction of layered double hydroxide (LDH)-based host–guest functional materials.

Sustainable waste management and recycling of Zn–Al layered double hydroxide after adsorption of levofloxacin as a safe anti-inflammatory nanomaterial

Inorganic nano-layered double hydroxide (LDH) materials are used in the catalytic field, and have demonstrated great applicability in the pharmacological fields. In the current study, we report Zn–Al LDH as an adsorbent for levofloxacin (levo). The physical and chemical properties of the prepared material before and after adsorption were monitored using X-ray diffraction, Fourier-transform infrared (FT-IR) spectroscopic analysis, energy dispersive X-ray spectroscopy (EDX), Brunauer–Emmett–Teller (BET) surface area measurements, high-resolution transmission electron microscopy (HRTEM), and field emission scanning electron microscopy (FESEM). Density functional theory (DFT) calculations for levo and its protonated species were studied at the B3LYP/6-311G (d,p) level of theory. The removal percentage of levo was 73.5%. The adsorption isotherm was investigated using nine different models at pH 9, where the obtained correlation coefficients (R²) using the Redlich–Peterson and Toth models were 0.977. The thermodynamic parameters ΔS°, ΔG° and ΔH° were estimated and discussed in detail. Also, to support the adsorption research field, the applicability of the formed waste after the adsorption of levo onto Zn–Al LDH was investigated for medical purposes. The toxicity of levo in both normal and nanocomposite form was studied. Neither toxicological symptoms nor harmless effects were exhibited throughout the in vivo study. The oral anti-inflammatory activity, tested using 6% formalin to produce edema in the footpad, was manifested as a significant increase of 37% in the anti-inflammatory effect of the Zn–Al LDH/levo nanocomposite compared to levo in its normal form.

Zn-Al LDH was synthesized using the co-precipitation method, characterized and used as an efficient adsorbent for the removal of levofloxacin. The safety and toxicity of the administered Zn-AL LDH/levo as a safe anti-inflammatory material.