Manganese Oxide Nanochips as a Novel Electrocatalyst for Direct Redox Sensing of Hexavalent Chromium

Graphene oxide-manganese oxide composite as an electrocatalyst for simultaneous detection of manganese- and chromium-contaminated water

The development of a sensitive and selective electrochemical sensor for simultaneous quantification of manganese (Mn(II)) and chromium (Cr(VI)) using composite of graphene oxide (GO) and manganese oxide modified screen printed carbon electrode (GO-Mn2O3/SPCE) is reported for the first time. The good sensing performance is achieved by mixing GO prepared by modified Hummer's method (GO-H) with proper particle size of Mn2O3 (241 nm). The mechanism of this sensor is based on the formation of Mn-O and Cr-O on the modified electrode with assistance of oxygen moieties provided by both Mn2O3 NPs and GO. The analytical performances were investigated by measuring electrochemical signal of Mn(II) and Cr(VI) by using square-wave cathodic stripping voltammetry (SWCSV). This sensor holds low electrode-to-electrode variation (relative standard deviation (RSD) < 4%) with a good limit of detection (LOD) at about 6.67 and 11.20 μg⋅L-1 for Mn(II) and Cr(VI), respectively. Applicability of this sensor was demonstrated by measuring Mn(II) and Cr(VI) in tap water samples with recovery of 90.77-103.45% and 82.34-103.73% for Mn(II) and Cr(VI) determinations, respectively. With the contribution of both GO and Mn2O3 as electrocatalysts, this developed sensor is capable to be used for water quality monitoring in real samples.

Spherical silver oxide nanoparticles for fabrication of electrochemical sensor for efficient 4-Nitrotoluene detection and assessment of their antimicrobial activity

This research article reports an economic and affordable microwave-assisted synthesis of spherical silver oxide nanoparticles (Ag₂O NPs) (80-90 nm) for an efficient electrochemical sensing of a hazardous organic pollutant 4-nitrotoluene (4-NT). Such well-characterized Ag₂O NPs were utilized to modify gold (Au) electrode in order to fabricate Ag₂O-NPs/Au sensor to detect 4-NT using cyclic voltammetry (CV) and linear sweep voltammetry (LSV) techniques. Ag₂O-NPs/Au sensor exhibited a distinguished electrical response as a function of varying 4-NT concentration in neutral medium samples. Ag₂O-NPs/Au sensor demonstrated an ultrahigh sensitivity as 15.33 μA (μM)^-1 cm^-2, a low detection limit of 62.3 nM, and linear response in detection ranges of 0.6-5.9 μM and 37-175 μM. The sensing performance of fabricated Ag₂O-NPs/Au sensor is reproducible, reusable, selective in presence of other chemical species, and validated using real samples. The Ag₂O/Au sensor had much rapid and easy fabrication process and offered much lower LOD for 4-NT detection than many previously reported sensors. Along with efficient electrochemical activity, the spherical Ag₂O NPs also exhibit remarkable antimicrobial activity against harmful gram negative Escherichia coli (E. coli) and gram positive Staphylococcus aureus (S. aureus) bacteria. Herein projected efficient Ag₂O-NPs/Au electrochemical sensor for 4-NT is affordable with the capability of scaling up to perform point-of-care 4-NT testing needed for successful environmental monitoring and water quality assurance.

Evaluation of Cr(VI) adsorption on glutaraldehyde crosslinked chitosan beads using cyclic voltammetry employing gold electrode

Hexavalent chromium is one of the toxic heavy metals found in wastewaters from industries like electroplating, leather tanning, and steel manufacturing. The Cr(VI) removal and quantitative detection are among the major concerns from an environmental toxicity point of view. In the present work, we report an effective electrochemical technique for Cr(VI) monitoring based on the utilization of gold electrode. The technique developed is user-friendly, non-destructive, and provides real-time monitoring of Cr(VI) from wastewaters in contrast to other spectroscopic and optical techniques. The technique developed was applied in monitoring Cr(VI) removal from synthetic Cr(VI) samples using chitosan cross-linked glutaraldehyde (C + G) beads. The parameter optimization for Cr(VI) removal using C + G beads was done. The experimental data of Cr(VI) adsorption on C + G beads obtained using cyclic voltammetry were further used for kinetic and thermodynamic studies. Kinetic and thermodynamic studies found that Cr(VI) adsorption follows pseudo-second-order kinetics and Modified Langmuir isotherm. The maximum adsorption capacity of C + G beads for Cr(VI) was found to be 28.65 mg g−1. These results obtained indicate that the cyclic voltammetric technique using gold electrode can be effectively applied for Cr(VI) analysis from wastewaters.

Electrochemical reduction of Cr(VI) in water: lessons learned from fundamental studies and applications

Converting toxic Cr(vi) to benign Cr(iii) would offer a solution to decontaminate drinking water. Electrochemical methods are ideally suited to carry out this reduction without added external reductants. Achieving this transformation at low overpotentials requires mediating the transfer of protons and electrons to Cr(vi). In this review thermodynamic parameters will be discussed to understand Cr(vi) speciation in water and identify reduction pathways. The electrochemical reduction of Cr(vi) at bare electrodes is reviewed and mechanistic considerations are discussed. Works on modified electrodes are compared to identify key parameters influencing the reduction. An overview of current applications to Cr(vi) reduction is briefly discussed to link fundamental studies to applications.

Emerging nanobiotechnology in agriculture for the management of pesticide residues

Utilization of pesticides is often necessary for meeting commercial requirements for crop quality and yield. However, incessant global pesticide use poses potential risks to human and ecosystem health. This situation increases the urgency of developing nano-biotechnology-assisted pesticide formulations that have high efficacy and low risk of side effects. The risks associated with both conventional and nanopesticides are summarized in this review. Moreover, the management of residual pesticides is still a global challenge. The contamination of soil and water resources with pesticides has adverse impact over agricultural productivity and food security; ultimately posing threats to living organisms. Pesticide residues in the eco-system may be treated via several biological and physicochemical processes, such as microbe-based degradation and advanced oxidation processes. With these issues in mind, we present a review that explores both existing and emerging techniques for management of pesticide residues and environmental risks. These techniques can offer a sustainable solution to revitalize the tarnished water/soil resources. Further, state-of-the-art research approaches to investigate biotechnological alternatives to conventional pesticides are discussed along with future prospects and mitigation techniques are recommended.

Recent Advances in Electrochemical Monitoring of Chromium

The extensive use of chromium by several industries conducts to the discharge of an immense quantity of its various forms in the environment which affects drastically the ecological and biological lives especially in the case of hexavalent chromium. Electrochemical sensors and biosensors are useful devices for chromium determination. In the last five years, several sensors based on the modification of electrode surface by different nanomaterials (fluorine tin oxide, titanium dioxide, carbon nanomaterials, metallic nanoparticles and nanocomposite) and biosensors with different biorecognition elements (microbial fuel cell, bacteria, enzyme, DNA) were employed for chromium monitoring. Herein, recent advances related to the use of electrochemical approaches for measurement of trivalent and hexavalent chromium from 2015 to 2020 are reported. A discussion of both chromium species detections and speciation studies is provided.

A flower-like ZnO–Ag2O nanocomposite for label and mediator free direct sensing of dinitrotoluene

2,4-Dinitrotoluene (2,4-DNT) is a nitro aromatic compound used as a raw material for trinitrotoluene (TNT) explosive synthesis along with several other industrial applications. Easy, rapid, cost-effective, and selective detection of 2,4-DNT is becoming essential due to its hepato carcinogenic nature and presence in surface as well as ground water as a contaminant. Keeping this in view, this research, for the first-time, reports the synthesis of novel ZnO–Ag₂O composite nanoflowers on a gold (Au) substrate, to fabricate an electrochemical sensor for label-free, direct sensing of 2,4-DNT selectively. The proposed ZnO–Ag₂O/Au sensor exhibits a sensitivity of 5 μA μM⁻¹ cm⁻² with a low limit of detection (LOD) of 13 nM, in a linear dynamic range (LDR) of 0.4 μM to 40 μM. The sensor showed reasonably high re-usability and reproducibility, with reliable results for laboratory and real-world samples.

2,4-Dinitrotoluene (2,4-DNT) is a nitro aromatic compound used as a raw material for trinitrotoluene (TNT) explosive synthesis along with several other industrial applications.

Synergistic catalytic effect between ultrasound waves and pyrimidine-2,4-diamine-functionalized magnetic nanoparticles: Applied for synthesis of 1,4-dihydropyridine pharmaceutical derivatives

A convenient strategy for synthesis of the various derivatives of 1,4-dihydropyridine (1,4-DHP), as one of the most important pharmaceutical compounds, is presented in this study. For this purpose, firstly, magnetic iron oxide nanoparticles (Fe₃O₄ NPs) were fabricated and suitably coated by silica network (SiO₂) and trimethoxy vinylsilane (TMVS). Then, their surfaces were well functionalized with pyrimidine-2,4-diamine (PDA) as the main active sites for catalyzing the synthesis reactions. In this regard, the performance of three different methods including reflux, microwave (MW) and ultrasound wave (USW) irradiations have been comparatively monitored via studying various analyses on the fabricated nanocatalyst (Fe₃O₄/SiO₂-PDA). Concisely, high efficiency of the USW irradiation (in an ultrasound cleaning bath with a frequency of 50 kHz and power of 250 W/L) has been well proven through the investigation of the main factors such as excellent surface-functionalization, core/shell structure conservation, particle uniformity, close size distribution of the particles, and great inhibition of the particle aggregation. Then, the effectiveness of the USW irradiation as a promising co-catalyst agent has been clearly demonstrated in the 1,4-DHP synthesis reactions. It has been concluded that the USW could provide more appropriate conditions for activation of the catalytic sites of Fe₃O₄/SiO₂-PDA NPs. However, high reaction yields (89%) have been obtained in the short reaction times (10 min) due to the substantial synergistic effect between the presented nanocatalyst and USW.

Point-of-Care Strategies for Detection of Waterborne Pathogens

Waterborne diseases that originated due to pathogen microorganisms are emerging as a serious global health concern. Therefore, rapid, accurate, and specific detection of these microorganisms (i.e., bacteria, viruses, protozoa, and parasitic pathogens) in water resources has become a requirement of water quality assessment. Significant research has been conducted to develop rapid, efficient, scalable, and affordable sensing techniques to detect biological contaminants. State-of-the-art technology-assisted smart sensors have improved features (high sensitivity and very low detection limit) and can perform in a real-time manner. However, there is still a need to promote this area of research, keeping global aspects and demand in mind. Keeping this view, this article was designed carefully and critically to explore sensing technologies developed for the detection of biological contaminants. Advancements using paper-based assays, microfluidic platforms, and lateral flow devices are discussed in this report. The emerging recent trends, mainly point-of-care (POC) technologies, of water safety analysis are also discussed here, along with challenges and future prospective applications of these smart sensing technologies for water health diagnostics.