Label-Free Flow Multiplex Biosensing via Photonic Crystal Surface Mode Detection

Chronopotentiometric Nanopore Sensor Based on a Stimulus-Responsive Molecularly Imprinted Polymer for Label-Free Dual-Biomarker Detection

The development of sensors for detection of biomarkers exhibits an exciting potential in diagnosis of diseases. Herein, we propose a novel electrochemical sensing strategy for label-free dual-biomarker detection, which is based on the combination of stimulus-responsive molecularly imprinted polymer (MIP)-modified nanopores and a polymeric membrane chronopotentiometric sensor. The ion fluxes galvanostatically imposed on the sensing membrane surface can be blocked by the recognition reaction between the target biomarker in the sample solution and the stimulus-responsive MIP receptor in the nanopores, thus causing a potential change. By using two external stimuli (i.e., pH and temperature), the recognition abilities of the stimulus-responsive MIP receptor can be effectively modulated so that dual-biomarker label-free chronopotentiometric detection can be achieved. Using alpha fetoprotein (AFP) and prostate-specific antigen (PSA) as model biomarkers, the proposed sensor offers detection limits of 0.17 and 0.42 ng/mL for AFP and PSA, respectively.

Intensity-Based Camera Setup for Refractometric and Biomolecular Sensing with a Photonic Crystal Microfluidic Chip

Label-free sensing is a promising approach for point-of-care testing devices. Among optical transducers, photonic crystal slabs (PCSs) have positioned themselves as an inexpensive yet versatile platform for label-free biosensing. A spectral resonance shift is observed upon biomolecular binding to the functionalized surface. Commonly, a PCS is read out by a spectrometer. Alternatively, the spectral shift may be translated into an intensity change by tailoring the system response. Intensity-based camera setups (IBCS) are of interest as they mitigate the need for postprocessing, enable spatial sampling, and have moderate hardware requirements. However, they exhibit modest performance compared with spectrometric approaches. Here, we show an increase of the sensitivity and limit of detection (LOD) of an IBCS by employing a sharp-edged cut-off filter to optimize the system response. We report an increase of the LOD from (7.1 ± 1.3) × 10^-4 RIU to (3.2 ± 0.7) × 10^-5 RIU. We discuss the influence of the region of interest (ROI) size on the achievable LOD. We fabricated a biochip by combining a microfluidic and a PCS and demonstrated autonomous transport. We analyzed the performance via refractive index steps and the biosensing ability via diluted glutathione S-transferase (GST) antibodies (1:250). In addition, we illustrate the speed of detection and demonstrate the advantage of the additional spatial information by detecting streptavidin (2.9 µg/mL). Finally, we present the detection of immunoglobulin G (IgG) from whole blood as a possible basis for point-of-care devices.

Dendrimer-Based Coatings on a Photonic Crystal Surface for Ultra-Sensitive Small Molecule Detection

We propose and demonstrate dendrimer-based coatings for a sensitive biochip surface that enhance the high-performance sorption of small molecules (i.e., biomolecules with low molecular weights) and the sensitivity of a label-free, real-time photonic crystal surface mode (PC SM) biosensor. Biomolecule sorption is detected by measuring changes in the parameters of optical modes on the surface of a photonic crystal (PC). We describe the step-by-step biochip fabrication process. Using oligonucleotides as small molecules and PC SM visualization in a microfluidic mode, we show that the PAMAM (poly-amidoamine)-modified chip's sorption efficiency is almost 14 times higher than that of the planar aminosilane layer and 5 times higher than the 3D epoxy-dextran matrix. The results obtained demonstrate a promising direction for further development of the dendrimer-based PC SM sensor method as an advanced label-free microfluidic tool for detecting biomolecule interactions. Current label-free methods for small biomolecule detection, such as surface plasmon resonance (SPR), have a detection limit down to pM. In this work, we achieved for a PC SM biosensor a Limit of Quantitation of up to 70 fM, which is comparable with the best label-using methods without their inherent disadvantages, such as changes in molecular activity caused by labeling.

Orientation of capture antibodies on gold nanoparticles to improve the sensitivity of ELISA-based medical devices

The sensitivity of ELISA-based devices strongly depends on the right orientation of antibodies on the sensor surface. The aim of this work was to increase the analytical performance of a commercial ELISA-based medical device (VIDAS®), thanks to the specific orientation of antibodies on gold nanostructured disposables. For this purpose, fPSA VIDAS® assay was used as model and the disposable providing the antigen binding surface (SPR®) was functionalized with gold nanostructures coated with monovalent half-fragment antibodies (reduced IgG, rIgG). The functionalization of polystyrene SPRs® with gold nanostructures was achieved through a one-step incubation of gold dispersions in a mixture of non-toxic solvents. Five different concentrations of gold nanoparticles (NPs) were tested with a maximum fluorescence enhancement for NPs density around 3-8 *10³ NPs/μm² (752 ± 11 RFV vs 316 ± 5 RFV of bare SPRs®). The comparison of the dose-response curve obtained with commercial and gold coated-SPRs® revealed a significant improvement (p < 0.0001) of the analytical sensitivity of the VIDAS® system using nanostructured disposables. This improved version of SPRs® allows to distinguish small variations of fPSA concentrations opening the way to the application of this biomarker to other kinds of cancer as recently described in the literature.

Label-Free Multiplexed Microfluidic Analysis of Protein Interactions Based on Photonic Crystal Surface Mode Imaging

High-throughput protein assays are crucial for modern diagnostics, drug discovery, proteomics, and other fields of biology and medicine. It allows simultaneous detection of hundreds of analytes and miniaturization of both fabrication and analytical procedures. Photonic crystal surface mode (PC SM) imaging is an effective alternative to surface plasmon resonance (SPR) imaging used in conventional gold-coated, label-free biosensors. PC SM imaging is advantageous as a quick, label-free, and reproducible technique for multiplexed analysis of biomolecular interactions. PC SM sensors are characterized by a longer signal propagation at the cost of a lower spatial resolution, which makes them more sensitive than classical SPR imaging sensors. We describe an approach for designing label-free protein biosensing assays employing PC SM imaging in the microfluidic mode. Label-free, real-time detection of PC SM imaging biosensors using two-dimensional imaging of binding events has been designed to study arrays of model proteins (antibodies, immunoglobulin G-binding proteins, serum proteins, and DNA repair proteins) at 96 points prepared by automated spotting. The data prove feasibility of simultaneous PC SM imaging of multiple protein interactions. The results pave the way to further develop PC SM imaging as an advanced label-free microfluidic assay for the multiplexed detection of protein interactions.

The Design of a Glycerol Concentration Sensor Based on an LRSPP Hybrid Photonic Biosensor

A refractive index sensor based on an on-chip silicon nitride (Si₃N₄) ridge waveguide long-range surface plasmon polariton (LRSPP) is theoretically designed. The waveguide sensor consists of a gold film to enable the plasmonic resonance on top of a Cytop polymer layer. A proper finite element method was used to design and optimize the geometric parameters at the optical wavelength of 633 nm. In addition, the spectral performance was evaluated using the transfer matrix method from 580 to 680 nm. The redshifted interference spectrum results from an increasing analyte refractive index. The sensitivities of 6313 dB/cm/RIU and 251.82 nm/RIU can be obtained with a 400 nm wide and 25 nm thick Au layer. The proposed sensor has the potential for point-of-care applications considering its compactness and simplicity of construction.

A New Design of a Terahertz Metamaterial Absorber for Gas Sensing Applications

Metamaterial absorbers are used in the terahertz frequency regime as photo-detectors, as sensing elements, in imaging applications, etc. Narrowband absorbers, on account of their ultra-slender bandwidth within the terahertz frequency spectrum, show a significant shift in the absorption peak when an extrinsic entity relative to the absorber, like refractive index or temperature of the encircling medium, is altered. This property paves the path for the narrowband absorbers to be used as potential sensors to detect any alterations in the encircling medium. In this paper, a novel design of a terahertz metamaterial (MTM) absorber is proposed, which can sense the variations in the refractive index (RI) of the surrounding medium. The effective permeability of the structure is negative, while its permittivity is positive; thus, it is a μ-negative metamaterial. The layout involves a swastika-shaped design made of gold on top of a dielectric gallium arsenide (GaAs) substrate. The proposed absorber achieved a nearly perfect absorption of 99.65% at 2.905 terahertz (THz), resulting in a quality factor (Q-factor) of 145.25. The proposed design has a sensitivity of 2.12 THz/RIU over a range of varied refractive index from n = 1.00 to n = 1.05 with a step size of 0.005, thereby achieving a Figure of Merit (FoM) of 106. Furthermore, the sensor was found to have a polarization-insensitive characteristic. Considering its high sensitivity (S), the proposed sensor was further tested for gas sensing applications of harmful gases. As a case study, the sensor was used to detect chloroform. The proposed work can be the foundation for developing highly sensitive gas sensors.

Hybridization of surface plasmons and photonic crystal resonators for high-sensitivity and high-resolution sensing applications

In this paper, an optical refractive index (RI) sensor based on a hybrid plasmonic-photonic crystal (P-PhC) is designed. In the sensor's structure, some metallic rods are embedded in a rod-type photonic crystal (PhC) structure. Numerical simulations are performed based on the finite-difference time-domain (FDTD) method. The obtained results illustrate that the localized surface plasmons (LSP) induced by metallic rods can be excited in a PhC lattice to generate a hybrid P-PhC mode. According to the results, the hybrid mode provides unique opportunities. Using metallic rods in the coupling regions between waveguides and the resonant cavity significantly increases the interaction of the optical field and analyte inside the cavity. The simulation results reveal that high sensitivity of 1672 nm/RIU and an excellent figure of merit (FoM) of 2388 RIU-1 are obtained for the proposed hybrid P-PhC sensor. These values are highest compared to the purely plasmonic and or purely PhC sensors reported in the literature. The proposed sensor could simultaneously enhance sensitivity and FoM values. Therefore, the proposed hybrid P-PhC RI sensor is a more fascinating candidate for high-sensitivity and high-resolution sensing applications at optic communication wavelengths.

Spatial-Division Multiplexing Approach for Simultaneous Detection of Fiber-Optic Ball Resonator Sensors: Applications for Refractometers and Biosensors

Fiber-optic ball resonators are an attractive technology for refractive index (RI) sensing and optical biosensing, as they have good sensitivity and allow for a rapid and repeatable manufacturing process. An important feature for modern biosensing devices is the multiplexing capacity, which allows for interrogating multiple sensors (potentially, with different functionalization methods) simultaneously, by a single analyzer. In this work, we report a multiplexing method for ball resonators, which is based on a spatial-division multiplexing approach. The method is validated on four ball resonator devices, experimentally evaluating both the cross-talk and the spectral shape influence of one sensor on another. We show that the multiplexing approach is highly efficient and that a sensing network with an arbitrary number of ball resonators can be designed with reasonable penalties for the sensing capabilities. Furthermore, we validate this concept in a four-sensor multiplexing configuration, for the simultaneous detection of two different cancer biomarkers across a widespread range of concentrations.

Biosensors for circulating tumor cells (CTCs)-biomarker detection in lung and prostate cancer: Trends and prospects

Cancer is one of the leading cause of death worldwide. Lung cancer (LCa) and prostate cancer (PCa) are the two most common ones particularly among men with about 20% of aggressive metastatic form leading to shorter overall survival. In recent years, circulating tumor cells (CTCs) have been investigated extensively for their role in metastatic progression and their involvement in reduced overall survival and treatment responses. Analysis of these cells and their associated biomarkers as "liquid biopsy" can provide valuable real-time information regarding the disease state and can be a potential avenue for early-stage detection and possible selection of personalized treatments. This review focuses on the role of CTCs and their associated biomarkers in lung and prostate cancer, as well as the shortcomings of conventional methods for their isolation and analysis. To overcome these drawbacks, biosensors are an elegant alternative because they are capable of providing valuable multiplexed information in real-time and analyzing biomarkers at lower concentrations. A comparative analysis of different transducing elements specific for the analysis of cancer cell and cancer biomarkers have been compiled in this review.

The Elaboration of Effective Coatings for Photonic Crystal Chips in Optical Biosensors

Here, we propose and study several types of quartz surface coatings designed for the high-performance sorption of biomolecules and their subsequent detection by a photonic crystal surface mode (PC SM) biosensor. The deposition and sorption of biomolecules are revealed by analyzing changes in the propagation parameters of optical modes on the surface of a photonic crystal (PC). The method makes it possible to measure molecular and cellular affinity interactions in real time by independently recording the values of the angle of total internal reflection and the angle of excitation of the surface wave on the surface of the PC. A series of dextrans with various anchor groups (aldehyde, carboxy, epoxy) suitable for binding with bioligands have been studied. We have carried out comparative experiments with dextrans with other molecular weights. The results confirmed that dextran with a Mw of 500 kDa and anchor epoxy groups have a promising potential as a matrix for the detection of proteins in optical biosensors. The proposed approach would make it possible to enhance the sensitivity of the PC SM biosensor and also permit studying the binding process of low molecular weight molecules in real time.

Aptamer-Sensitized Nanoribbon Biosensor for Ovarian Cancer Marker Detection in Plasma

The detection of CA 125 protein in buffer solution with a silicon-on-insulator (SOI)-based nanoribbon (NR) biosensor was experimentally demonstrated. In the biosensor, sensor chips, bearing an array of 12 nanoribbons (NRs) with n-type conductance, were employed. In the course of the analysis with the NR biosensor, the target protein was biospecifically captured onto the surface of the NRs, which was sensitized with covalently immobilized aptamers against CA 125. Atomic force microscopy (AFM) and mass spectrometry (MS) were employed in order to confirm the formation of the probe–target complexes on the NR surface. Via AFM and MS, the formation of aptamer–antigen complexes on the surface of SOI substrates with covalently immobilized aptamers against CA 125 was revealed, thus confirming the efficient immobilization of the aptamers onto the SOI surface. The biosensor signal, resulting from the biospecific interaction between CA 125 and the NR-immobilized aptamer probes, was shown to increase with an increase in the target protein concentration. The minimum detectable CA 125 concentration was as low as 1.5 × 10−17 M. Moreover, with the biosensor proposed herein, the detection of CA 125 in the plasma of ovarian cancer patients was demonstrated.

Review of Integrated Optical Biosensors for Point-Of-Care Applications

This article reviews optical biosensors and their integration with microfluidic channels. The integrated biosensors have the advantages of higher accuracy and sensitivity because they can simultaneously monitor two or more parameters. They can further incorporate many functionalities such as electrical control and signal readout monolithically in a single semiconductor chip, making them ideal candidates for point-of-care testing. In this article, we discuss the applications by specifically looking into point-of-care testing (POCT) using integrated optical sensors. The requirement and future perspective of integrated optical biosensors for POC is addressed.

Serum and Saliva Levels of Cancer Antigen 15-3, Carcinoembryonic Antigen, Estradiol, Vaspin, and Obestatin as Biomarkers for the Diagnosis of Breast Cancer in Postmenopausal Women

OBJECTIVE

To find suitable biomarkers for diagnosis of Breast cancer in serum and saliva; also, to examine the correlation between salivary and serum concentrations of suitable biomarkers.

METHODS

This case-control study included 30 women with breast cancer as a case group and 30 healthy women as a matched control group. Blood and saliva specimens were collected from all participants. We evaluated serum and salivary cancer antigen 15-3 (CA15-3), carcinoembryonic antigen (CEA), estradiol, vaspin, and obestatin concentrations. Mann-Whitney U testing and Spearman correlation coefficients were used for statistical analysis.

RESULTS

Serum and salivary concentrations of estradiol were significantly higher in patients with breast cancer (BC) than in healthy women (P < .05). Also, serum CEA and salivary obestatin concentrations were significantly higher in BC patients than in the control group (P < .05). However, there was no significant difference between other parameters in patients with BC and controls. We observed a positive correlation between serum and salivary concentrations of CA15-3, as well as a negative correlation between serum and salivary concentrations of vaspin and obestatin.

CONCLUSION

The results of this study demonstrated that concentrations of CEA and estradiol in serum, obestatin in serum and saliva, and estradiol in saliva were significantly different between the 2 groups.

Continuous Detection of Increasing Concentrations of Thrombin Employing a Label-Free Photonic Crystal Aptasensor

Thrombin generation is a complex and finely regulated pathway that provokes dynamical changes of thrombin concentration in blood when a vascular injury occurs. In order to characterize the initiation phase of such process, when thrombin concentration is in the nM range, a label-free optical aptasensor is proposed here. This aptasensor combines a 1D photonic crystal structure consisting of a silicon corrugated waveguide with thrombin binding aptamers on its surface as bioreceptors. As a result, this aptasensor has been demonstrated to specifically detect thrombin concentrations ranging from 270 pM to 27 nM with an estimated detection limit of 33.5 pM and a response time of ~2 min. Furthermore, it has also been demonstrated that this aptasensor is able to continuously respond to consecutive increasing concentrations of thrombin and to detect binding events as they occur. All these features make this aptasensor a good candidate to continuously study how thrombin concentration progressively increases during the initiation phase of the coagulation cascade.