The production of L- and D-phenylalanines using engineered phenylalanine ammonia lyases from Petroselinum crispum

Direct asymmetric synthesis of β-branched aromatic α-amino acids using engineered phenylalanine ammonia lyases

β-Branched aromatic α-amino acids are valuable building blocks in natural products and pharmaceutically active compounds. However, their chemical or enzymatic synthesis is challenging due to the presence of two stereocenters. We design phenylalanine ammonia lyases (PAL) variants for the direct asymmetric synthesis of β-branched aromatic α-amino acids. Based on extensive computational analyses, we unravel the enigma behind PAL's inability to accept β-methyl cinnamic acid (β-MeCA) as substrate and achieve the synthesis of the corresponding amino acids of β-MeCA and analogs using a double (PcPAL-L256V-I460V) and a triple mutant (PcPAL-F137V-L256V-I460V). The reactions are scaled-up using an optimized E. coli based whole-cell biotransformation system to produce ten β-branched phenylalanine analogs with high diastereoselectivity (dr > 20:1) and enantioselectivity (ee > 99.5%) in yields ranging from 41-71%. Moreover, we decipher the mechanism of PcPAL-L256V-I460V for the acceptance of β-MeCA and converting it with excellent stereoselectivity by computational simulations. Thus, this study offers an efficient method for synthesizing β-branched aromatic α-amino acids.

Engineered Phenylalanine Ammonia-Lyases for the Enantioselective Synthesis of Aspartic Acid Derivatives

Biocatalytic hydroamination of alkenes is an efficient and selective method to synthesize natural and unnatural amino acids. Phenylalanine ammonia-lyases (PALs) have been previously engineered to access a range of substituted phenylalanines and heteroarylalanines, but their substrate scope remains limited, typically including only arylacrylic acids. Moreover, the enantioselectivity in the hydroamination of electron-deficient substrates is often poor. Here, we report the structure-based engineering of PAL from Planctomyces brasiliensis (PbPAL), enabling preparative-scale enantioselective hydroaminations of previously inaccessible yet synthetically useful substrates, such as amide- and ester-containing fumaric acid derivatives. Through the elucidation of cryo-electron microscopy (cryo-EM) PbPAL structure and screening of the structure-based mutagenesis library, we identified the key active site residue L205 as pivotal for dramatically enhancing the enantioselectivity of hydroamination reactions involving electron-deficient substrates. Our engineered PALs demonstrated exclusive α-regioselectivity, high enantioselectivity, and broad substrate scope. The potential utility of the developed biocatalysts was further demonstrated by a preparative-scale hydroamination yielding tert-butyl protected l-aspartic acid, widely used as intermediate in peptide solid-phase synthesis.

State-of-the-art strategies and research advances for the biosynthesis of D-amino acids

D-amino acids (D-AAs) are the enantiomeric counterparts of L-amino acids (L-AAs) and important functional factors with a wide variety of physiological activities and applications in the food manufacture industry. Some D-AAs, such as D-Ala, D-Leu, and D-Phe, have been favored by consumers as sweeteners and fragrances because of their unique flavor. The biosynthesis of D-AAs has attracted much attention in recent years due to their unique advantages. In this review, we comprehensively analyze the structure-function relationships, biosynthesis pathways, multi-enzyme cascade and whole-cell catalysis for the production of D-AAs. The state-of-the-art strategies, including immobilization, protein engineering, and high-throughput screening, are summarized. Future challenges and perspectives of strategies-driven by bioinformatics technologies and smart computing technologies, as well as enzyme immobilization, are also discussed. These new approaches will promote the commercial production and application of D-AAs in the food industry by optimizing the key enzymes for industrial biocatalysts.

The Biocatalytic Potential of Aromatic Ammonia-Lyase from Loktanella atrilutea

Characterization of the aromatic ammonia-lyase from Loktanella atrilutea (LaAAL) revealed reduced activity towards canonical AAL substrates: l-Phe, l-Tyr, and l-His, contrasted by its pronounced efficiency towards 3,4-dimethoxy-l-phenylalanine. Assessing the optimal conditions, LaAAL exhibited maximal activity at pH 9.5 in the ammonia elimination reaction route, distinct from the typical pH ranges of most PALs and TALs. Within the exploration of the ammonia source for the opposite, synthetically valuable ammonia addition reaction, the stability of LaAAL exhibited a positive correlation with the ammonia concentration, with the highest stability in 4 M ammonium carbamate of unadjusted pH of ~9.5. While the enzyme activity increased with rising temperatures yet, the highest operational stability and highest stationary conversions of LaAAL were observed at 30 °C. The substrate scope analysis highlighted the catalytic adaptability of LaAAL in the hydroamination of diverse cinnamic acids, especially of meta-substituted and di-/multi-substituted analogues, with structural modelling exposing steric clashes between the substrates' ortho-substituents and catalytic site residues. LaAAL showed a predilection for ammonia elimination, while classifying as a tyrosine ammonia-lyase (TAL) among the natural AAL classes. However, its distinctive attributes, such as genomic context, unique substrate specificity and catalytic fingerprint, suggest a potential natural role beyond those of known AAL classes.

Exploring the Substrate Switch Motif of Aromatic Ammonia Lyases

Aromatic ammonia lyases (AALs) are important enzymes for biocatalysis as they enable the asymmetric synthesis of chiral l-α-amino acids from the corresponding α,β-unsaturated precursors. AALs have very similar protein structures and active site pockets but exhibit strict substrate specificity towards tyrosine, phenylalanine, or histidine. Herein, through systematic bioinformatics and structural analysis, we discovered eight new motifs of amino acid residues in AALs. After introducing them - as well as four already known motifs - into different AALs, we learned that altering the substrate specificity by engineering the substrate switch motif in phenylalanine ammonia lyases (PALs), phenylalanine/tyrosine ammonia lyases (PTALs), and tyrosine ammonia lyases (TALs) was only partially successful. However, we discovered that three previously unknown residue combinations introduced a substrate switch from tyrosine to phenylalanine in TAL, which was converted up to 20-fold better compared to the wild-type TAL enzyme.

Enzymatic Oxy- and Amino-Functionalization in Biocatalytic Cascade Synthesis: Recent Advances and Future Perspectives

Biocatalytic cascades are a powerful tool for building complex molecules containing oxygen and nitrogen functionalities. Moreover, the combination of multiple enzymes in one pot offers the possibility to minimize downstream processing and waste production. In this review, we illustrate various recent efforts in the development of multi-step syntheses involving C-O and C-N bond-forming enzymes to produce high value-added compounds, such as pharmaceuticals and polymer precursors. Both in vitro and in vivo examples are discussed, revealing the respective advantages and drawbacks. The use of engineered enzymes to boost the cascades outcome is also addressed and current co-substrate and cofactor recycling strategies are presented, highlighting the importance of atom economy. Finally, tools to overcome current challenges for multi-enzymatic oxy- and amino-functionalization reactions are discussed, including flow systems with immobilized biocatalysts and cascades in confined nanomaterials.

Ancestral l-amino acid oxidase: From substrate scope exploration to phenylalanine ammonia-lyase assay

In this study we assessed the applicability of the recently reported ancestral l-amino acid oxidase (AncLAAO), for the development of an enzyme-coupled phenylalanine ammonia-lyase (PAL) activity assay. Firstly, the expression and isolation of the AncLAAO-N1 was optimized, followed by activity tests of the obtained octameric N-terminal His-tagged enzyme towards various phenylalanine analogues to assess the compatibility of its substrate scope with that of the well-characterized PALs. AncLAAO-N1 showed high catalytic efficiency towards phenylalanines mono-, di-, or multiple-substituted in the meta- or para-positions, with ortho- substituted substrates being poorly transformed, these results highlighting the significant overlap between its substrate scope and those of PALs. After successful set-up of the AncLAAO-PAL coupled solid phase assay, in a 'proof of concept' approach we demonstrated its applicability for the high-throughput activity screens of PAL-libraries, by screening the saturation mutagenesis-derived I460NNK variant library of PAL from Petroselinum crispum, using p-MeO-phenylalanine as model substrate. Notably, the hits revealed by the coupled assay comprised all the active PAL variants: I460V, I460T, I460S, I460L, previously identified from the tested PAL-library by other assays. Our results validate the applicability of AncLAAO for coupled enzyme systems with phenylalanine ammonia-lyases, including cell-based assays suitable for the high-throughput screening of directed evolution-derived PAL-libraries.

Characterization of Phenylalanine Ammonia Lyases from Lettuce (Lactuca sativa L.) as Robust Biocatalysts for the Production of d- and l-Amino Acids

Phenylalanine ammonia lyase (PAL) catalyzes the reversible conversion of l-phenylalanine into the corresponding trans-cinnamic acid, providing a route to optically pure α-amino acids. We explored the catalytic function of all five PALs encoded in the genome of lettuce (Lactuca sativa L.) that are previously known to be involved in wound browning. All LsPALs were active toward l-phenylalanine in the ammonia elimination reaction and displayed maximum activity at 55-60 °C and pH 9.0-9.5. However, four of them, LsPAL1-LsPAL4, showed significantly higher activity and thermal stability than LsPAL5, as well as a broader substrate spectrum including some challenging substrates with steric demanding or electron-donating substituents. The best one LsPAL3 was subjected to the kinetic resolution of a panel of 21 rac-phenylalanine derivatives, as well as the ammonia addition of 21 cinnamic acid derivatives. It showed excellent enantioselectivity in most cases and significantly better activity than previously described PALs for a number of challenging non-natural substrates, demonstrating its great potential in biocatalysis.

Phenylalanine ammonia-lyases: combining protein engineering and natural diversity

In this study, rational design and saturation mutagenesis efforts for engineering phenylalanine ammonia-lyase from Petroselinum crispum (PcPAL) provided tailored PALs active towards challenging, highly valuable di-substituted substrates, such as the L-DOPA precursor 3,4-dimethoxy-L-phenylalanine or the 3-bromo-4-methoxy-phenylalanine. The rational design approach and saturation mutagenesis strategy unveiled identical PcPAL variants of improved activity, highlighting the limited mutational variety of the substrate specificity-modulator residues, L134, F137, I460 of PcPAL. Due to the restricted catalytic efficiency of the best performing L134A/I460V and F137V/I460V PcPAL variants, we imprinted these beneficial mutations to PALs of different origins. The variants of PALs from Arabidopsis thaliana (AtPAL) and Anabaena variabilis (AvPAL) showed higher catalytic efficiency than their PcPAL homologues. Further, the engineered PALs were also compared in terms of catalytic efficiency with a novel aromatic ammonia-lyase from Loktanella atrilutea (LaAAL), close relative of the metagenome-derived aromatic ammonia-lyase AL-11, reported recently to possess atypically high activity towards substrates with electron-donor aromatic substituents. Indeed, LaAAL outperformed the engineered Pc/At/AvPALs in the production of 3,4-dimethoxy-L-phenylalanine; however, in case of 3-bromo-4-methoxy derivatives it showed no activity, with computational results supporting the occurrence of steric hindrance. Transferring the unique array of selectivity modulator residues from LaAAL to the well-characterized PALs did not enhance their activity towards the targeted substrates. Moreover, applying the rational design strategy valid for these well-characterized PALs to LaAAL decreased its activity. These results suggest that distinct tailoring rationale is required for LaAAL/AL-11-like aromatic ammonia-lyases, which might represent a distinct PAL subclass, with natural reaction and substrate scope modified through evolutionary processes. KEY POINTS: • PAL-activity for challenging substrates generated by protein engineering • Rational/semi-rational protein engineering reveals constrained mutational variability • Engineered PALs are outperformed by novel ALs of distinct catalytic site signature.

Engineered, Scalable Production of Optically Pure l-Phenylalanines Using Phenylalanine Ammonia-Lyase from Arabidopsis thaliana

An efficient preparative-scale synthetic procedure of l-phenylalanine derivatives has been developed using mutant variants of phenylalanine ammonia-lyase from Arabidopsis thaliana (AtPAL). After rigorous reaction engineering, the AtPAL-catalyzed hydroamination reaction of cinnamic acids provided several unnatural amino acids of high synthetic value, such as (S)-m- and (S)-p-methoxyphenylalanine; (S)-o- and (S)-m-methylphenylalanine; and (S)-o- and (S)-p-bromophenylalanine at preparative scale, significantly surpassing the catalytic efficiency in terms of conversions and yields of the previously reported PcPAL-based biotransformations. The AtPAL variants tolerated high substrate and product concentrations, representing an important extension of the PAL-toolbox, while the engineered biocatalytic procedures of improved E-factor and space-time yields fulfill the requirements of sustainable and green chemistry, providing facile access to valuable amino acid building blocks.

Towards a general approach for tailoring the hydrophobic binding site of phenylalanine ammonia-lyases

Unnatural substituted amino acids play an important role as chiral building blocks, especially for pharmaceutical industry, where the synthesis of chiral biologically active molecules still represents an open challenge. Recently, modification of the hydrophobic binding pocket of phenylalanine ammonia-lyase from Petroselinum crispum (PcPAL) resulted in specifically tailored PcPAL variants, contributing to a rational design template for PAL-activity enhancements towards the differently substituted substrate analogues. Within this study we tested the general applicability of this rational design model in case of PALs, of different sources, such as from Arabidopsis thaliana (AtPAL) and Rhodosporidium toruloides (RtPAL). With some exceptions, the results support that the positions of substrate specificity modulating residues are conserved among PALs, thus the mutation with beneficial effect for PAL-activity enhancement can be predicted using the established rational design model. Accordingly, the study supports that tailoring PALs of different origins and different substrate scope, can be performed through a general method. Moreover, the fact that AtPAL variants I461V, L133A and L257V, all outperformed in terms of catalytic efficiency the corresponding, previously reported, highly efficient PcPAL variants, of identical catalytic site, suggests that not only catalytic site differences influence the PAL-activity, thus for the selection of the optimal PAL-biocatalysts for a targeted process, screening of PALs from different origins, should be included.

Population distributions of single-cell adhesion parameters during the cell cycle from high-throughput robotic fluidic force microscopy

Single-cell adhesion plays an essential role in biological and biomedical sciences, but its precise measurement for a large number of cells is still a challenging task. At present, typical force measuring techniques usually offer low throughput, a few cells per day, and therefore are unable to uncover phenomena emerging at the population level. In this work, robotic fluidic force microscopy (FluidFM) was utilized to measure the adhesion parameters of cells in a high-throughput manner to study their population distributions in-depth. The investigated cell type was the genetically engineered HeLa Fucci construct with cell cycle-dependent expression of fluorescent proteins. This feature, combined with the high-throughput measurement made it possible for the first time to characterize the single-cell adhesion distributions at various stages of the cell cycle. It was found that parameters such as single-cell adhesion force and energy follow a lognormal population distribution. Therefore, conclusions based on adhesion data of a low number of cells or treating the population as normally distributed can be misleading. Moreover, we found that the cell area was significantly the smallest, and the area normalized maximal adhesion force was significantly the largest for the colorless cells (the mitotic (M) and early G1 phases). Notably, the parameter characterizing the elongation of the cells until the maximum level of force between the cell and its substratum was also dependent on the cell cycle, which quantity was the smallest for the colorless cells. A novel parameter, named the spring coefficient of the cell, was introduced as the fraction of maximal adhesion force and maximal cell elongation during the mechanical detachment, which was found to be significantly the largest for the colorless cells. Cells in the M phase adhere in atypical way, with so-called reticular adhesions, which are different from canonical focal adhesions. We first revealed that reticular adhesion can exert a higher force per unit area than canonical focal adhesions, and cells in this phase are significantly stiffer. The possible biological consequences of these findings were also discussed, together with the practical relevance of the observed population-level adhesion phenomena.

Discovery of novel tyrosine ammonia lyases for the enzymatic synthesis of p-coumaric acid

p‐Coumaric acid (p‐CA) is a key precursor for the biosynthesis of flavonoids. Tyrosine ammonia lyases (TALs) specifically catalyze the synthesis of p‐CA from l‐tyrosine, which is a convenient enzymatic pathway. To explore novel and highly active TALs, a phylogenetic tree‐building approach was conducted including 875 putative TALs and 46 putative phenylalanine/tyrosine ammonia lyases (PTALs). Among them, 5 TALs and 3 PTALs were successfully characterized and found to exhibit the proposed enzymatic activity. The TAL from Chryseobacterium luteum sp. nov (TAL_clu) has the highest affinity (K_m=0.019 mm) and conversion efficiency (k_cat/K_m=1631 s⁻¹ ⋅ mm⁻¹) towards l‐tyrosine. The reaction conditions for two purified enzymes and their E. coli recombinant cells were optimized and p‐CA yields of 2.03 g/L after 8 hours by TAL_clu and 2.35 g/L after 24 h by TAL from Rivularia sp. PCC 7116 (TAL_rpc) in whole cells were achieved. These TALs are thus candidates for the construction of whole‐cell systems to produce the flavonoid precursor p‐CA.

Computational-Designed Enzyme for β-Tyrosine Production in Lignin Valorization

Lignin is an underutilized sustainable source of aromatic compounds. To valorize the low-value lignin monomers, we proposed an efficient strategy, involving enzymatic conversion from trans-p-hydroxycinnamic acids to generate valued-added canonical and non-canonical aromatic amino acids. Among them, β-amino acids are recognized as building blocks for bioactive natural products and pharmaceutical ingredients due to their attractive antitumor properties. Using computational enzyme design, the (R)-β-selective phenylalanine aminomutase from Taxus chinensis (TchPAM) was successfully mutated to accept β-tyrosine as the substrate, as well as to generate the (R)-β-tyrosine with excellent enantiopurity (ee > 99%) as the unique product from trans-p-hydroxycinnamic acid. Moreover, the kinetic parameters were determined for the reaction of four Y424 enzyme variants with the synthesis of different phenylalanine and tyrosine enantiomers. In the ammonia elimination reaction of (R)-β-tyrosine, the variants Y424N and Y424C displayed a two-fold increased catalytic efficiency of the wild type. In this work, a binding pocket in the active site, including Y424, K427, I431, and E455, was examined for its influence on the β-enantioselectivity of this enzyme family. Combining the upstream lignin depolymerization and downstream production, a sustainable value chain based on lignin is enabled. In summary, we report a β-tyrosine synthesis process from a monolignol component, offering a new way for lignin valorization by biocatalyst modification.

Entrapment of Phenylalanine Ammonia-Lyase in Nanofibrous Polylactic Acid Matrices by Emulsion Electrospinning

Immobilization of the recombinant, plant-derived Petroselinum crispum phenylalanine ammonia lyase (PcPAL) in electrospun matrices have the potential to create promising, easy-to-use biocatalysts. Polylactic acid (PLA) a biologically inert, commercial biopolymer, was chosen as the material of the carrier system. PLA could be electrospun properly only from water-immiscible organic solvents, which limits its application as a carrier of sensitive biological objects. The emulsion electrospinning is a proper solution to overcome this issue using non-ionic emulsifiers with different hydrophilic-lipophilic balance (HLB) values. The stabilized emulsion could protect the sensitive PcPAL dissolved in the aqueous buffer phase and improve fiber formation, plus help to keep the biocatalytic activity of enzymes. In this study, the first approach is described to produce PLA nanofibers containing PcPAL enzymes by emulsion electrospinning and to use the resulted biocatalyst in the ammonia elimination reaction from l-phenylalanine.

Robust, site-specifically immobilized phenylalanine ammonia-lyases for the enantioselective ammonia addition of cinnamic acids

Phenylalanine ammonia-lyases (PALs) catalyse the non-oxidative deamination of l-phenylalanine to trans-cinnamic acid, while in the presence of high ammonia concentration, the synthetically attractive reverse reaction occurs. Although they have been intensively studied, the wider application of PALs for the large scale synthesis of non-natural amino acids is still rather limited, mainly due to the decreased operational stability of PALs under the high ammonia concentration conditions of ammonia addition. Herein, we describe the development of a highly stable and active immobilized PAL-biocatalyst obtained through site-specific covalent immobilization onto single-walled carbon nanotubes (SWCNTs), employing maleimide/thiol coupling of engineered enzymes containing surficial Cys residues. The immobilization method afforded robust biocatalysts (by strong covalent attachment to the support) and allowed modulation of enzymatic activity (by proper selection of binding site, controlling the orientation of the enzyme attached to the support). The novel biocatalysts were investigated in PAL-catalyzed reactions, focusing on the synthetically challenging ammonia addition reaction. The optimization of the immobilization (enzyme load) and reaction conditions (substrate : biocatalyst ratio, ammonia source, reaction temperature) involving the best performing biocatalyst SWCNTNH2 -SS-PcPAL was performed. The biocatalyst, under the optimal reaction conditions, showed high catalytic efficiency, providing excellent conversion (c ∼90% in 10 h) of cinnamic acid into l-Phe, and more importantly, possesses high operational stability, maintaining its high efficiency over >7 reaction cycles. Moreover, the site-specifically immobilized PcPAL L134A/S614C and PcPAL I460V/S614C variants were successfully applied in the synthesis of several l-phenylalanine analogues of high synthetic value, providing perspectives for the efficient replacement of classical synthetic methods for l-phenylalanines with a mild, selective and eco-friendly enzymatic alternative.

Study of the l-Phenylalanine Ammonia-Lyase Penetration Kinetics and the Efficacy of Phenylalanine Catabolism Correction Using In Vitro Model Systems

The kinetics of l-phenylalanine ammonia-lyase (PAL) penetration into the monolayer of liver cells after its release from capsules was studied. The studies showed the absence of the effect of the capsule shell based on plant hydrocolloids on the absorption of l-phenylalanine ammonia-lyase in systems simulating the liver surface. After 120 min of incubation, in all variants of the experiment, from 87.0 to 96.8% of the enzyme penetrates the monolayer of liver cells. The combined analysis of the results concludes that the developed encapsulated form of l-phenylalanine ammonia-lyase is characterized by high efficiency in correcting the disturbed catabolism of phenylalanine in phenylketonuria, which is confirmed by the results of experiments carried out on in vitro model systems. PAL is approved for the treatment of adult patients with phenylketonuria. The encapsulated l-phenylalanine ammonia-lyase form can find therapeutic application in the phenylketonuria treatment after additional in vitro and in vivo studies, in particular, the study of preparation safety indicators. Furthermore, it demonstrated high efficacy in tumor regression and the treatment of tyrosine-related metabolic disorders such as tyrosinemia. Several therapeutically valuable metabolites biosynthesized by PAL via its catalytic action are included in food supplements, antimicrobial peptides, drugs, amino acids, and their derivatives. PAL, with improved pharmacodynamic and pharmacokinetic properties, is a highly effective medical drug.

Identification and Characterization of an Efficient Phenylalanine Ammonia-Lyase from Photorhabdus luminescens

A putative aromatic amino acid ammonia-lyase gene (named Pl-pal) was discovered in Photorhabdus luminescens DSM 3368. BLAST and phylogenetic analyses predicted that this enzyme is a histidine ammonia-lyase, whereas sequence alignment suggested that it is more likely a phenylalanine ammonia-lyase (PAL). This gene was amplified from P. luminescens and expressed in Escherichia coli BL21(DE3). The function of Pl-PAL (58 kDa) was characterized by in vitro enzymatic reactions with L-phenylalanine (L-Phe), L-tyrosine (L-Tyr), L-histidine (L-His), and L-tryptophan (L-Trp). Pl-PAL can convert L-Phe and L-Tyr to trans-cinnamic acid and p-coumaric acid, respectively, but had no function on L-His and L-Trp. The optimum temperature and pH were determined to be 40 °C and 11.0, respectively. Under the optimal conditions, Pl-PAL had a k_cat/K_m value of 0.52 s^-1 mM^-1 with L-Phe as the substrate, while only 0.013 s^-1 mM^-1 for L-Tyr. Therefore, the primary function of Pl-PAL was determined to be PAL. The Pl-pal-harboring E. coli strain was used as a whole-cell biocatalyst to produce trans-cinnamic acid from L-Phe. The overall molar conversion rate and productivity were 65.98% and 228.10 mg L^-1 h^-1, respectively, after the cells were repeatedly utilized 7 times. This work thus provides a promising strain for industrial production of trans-cinnamic acid.

Fluorescent enzyme-coupled activity assay for phenylalanine ammonia-lyases

Phenylalanine ammonia-lyases (PALs) catalyse the non-oxidative deamination of l-phenylalanine to trans-cinnamic acid, while in the presence of high ammonia concentration the reverse reaction occurs. PALs have been intensively studied, however, their industrial applications for amino acids synthesis remained limited, mainly due to their decreased operational stability or limited substrate specificity. The application of extensive directed evolution procedures to improve their stability, activity or selectivity, is hindered by the lack of reliable activity assays allowing facile screening of PAL-activity within large-sized mutant libraries. Herein, we describe the development of an enzyme-coupled fluorescent assay applicable for PAL-activity screens at whole cell level, involving decarboxylation of trans-cinnamic acid (the product of the PAL reaction) by ferulic acid decarboxylase (FDC1) and a photochemical reaction of the produced styrene with a diaryltetrazole, that generates a detectable, fluorescent pyrazoline product. The general applicability of the fluorescent assay for PALs of different origin, as well as its versatility for the detection of tyrosine ammonia-lyase (TAL) activity have been also demonstrated. Accordingly, the developed procedure provides a facile tool for the efficient activity screens of large mutant libraries of PALs in presence of non-natural substrates of interest, being essential for the substrate-specificity modifications/tailoring of PALs through directed evolution-based protein engineering.

Overview on Multienzymatic Cascades for the Production of Non-canonical α-Amino Acids

The 22 genetically encoded amino acids (AAs) present in proteins (the 20 standard AAs together with selenocysteine and pyrrolysine), are commonly referred as proteinogenic AAs in the literature due to their appearance in ribosome-synthetized polypeptides. Beyond the borders of this key set of compounds, the rest of AAs are generally named imprecisely as non-proteinogenic AAs, even when they can also appear in polypeptide chains as a result of post-transductional machinery. Besides their importance as metabolites in life, many of D-α- and L-α-"non-canonical" amino acids (NcAAs) are of interest in the biotechnological and biomedical fields. They have found numerous applications in the discovery of new medicines and antibiotics, drug synthesis, cosmetic, and nutritional compounds, or in the improvement of protein and peptide pharmaceuticals. In addition to the numerous studies dealing with the asymmetric synthesis of NcAAs, many different enzymatic pathways have been reported in the literature allowing for the biosynthesis of NcAAs. Due to the huge heterogeneity of this group of molecules, this review is devoted to provide an overview on different established multienzymatic cascades for the production of non-canonical D-α- and L-α-AAs, supplying neophyte and experienced professionals in this field with different illustrative examples in the literature. Whereas the discovery of new or newly designed enzymes is of great interest, dusting off previous enzymatic methodologies by a "back and to the future" strategy might accelerate the implementation of new or improved multienzymatic cascades.

Saturation Mutagenesis for Phenylalanine Ammonia Lyases of Enhanced Catalytic Properties

Phenylalanine ammonia-lyases (PALs) are attractive biocatalysts for the stereoselective synthesis of non-natural phenylalanines. The rational design of PALs with extended substrate scope, highlighted the substrate specificity-modulator role of residue I460 of Petroselinum crispum PAL. Herein, saturation mutagenesis at key residue I460 was performed in order to identify PcPAL variants of enhanced activity or to validate the superior catalytic properties of the rationally explored I460V PcPAL compared with the other possible mutant variants. After optimizations, the saturation mutagenesis employing the NNK-degeneracy generated a high-quality transformant library. For high-throughput enzyme-activity screens of the mutant library, a PAL-activity assay was developed, allowing the identification of hits showing activity in the reaction of non-natural substrate, p-MeO-phenylalanine. Among the hits, besides the known I460V PcPAL, several mutants were identified, and their increased catalytic efficiency was confirmed by biotransformations using whole-cells or purified PAL-biocatalysts. Variants I460T and I460S were superior to I460V-PcPAL in terms of catalytic efficiency within the reaction of p-MeO-Phe. Moreover, I460T PcPAL maintained the high specificity constant of the wild-type enzyme for the natural substrate, l-Phe. Molecular docking supported the favorable substrate orientation of p-MeO-cinnamic acid within the active site of I460T variant, similarly as shown earlier for I460V PcPAL (PDB ID: 6RGS).

Advances in Enzymatic Synthesis of D-Amino Acids

In nature, the D-enantiomers of amino acids (D-AAs) are not used for protein synthesis and during evolution acquired specific and relevant physiological functions in different organisms. This is the reason for the surge in interest and investigations on these "unnatural" molecules observed in recent years. D-AAs are increasingly used as building blocks to produce pharmaceuticals and fine chemicals. In past years, a number of methods have been devised to produce D-AAs based on enantioselective enzymes. With the aim to increase the D-AA derivatives generated, to improve the intrinsic atomic economy and cost-effectiveness, and to generate processes at low environmental impact, recent studies focused on identification, engineering and application of enzymes in novel biocatalytic processes. The aim of this review is to report the advances in synthesis of D-AAs gathered in the past few years based on five main classes of enzymes. These enzymes have been combined and thus applied to multi-enzymatic processes representing in vitro pathways of alternative/exchangeable enzymes that allow the generation of an artificial metabolism for D-AAs synthetic purposes.