Transferred monolayer MoS2 onto GaN for heterostructure photoanode: Toward stable and efficient photoelectrochemical water splitting

Photoelectrocatalytic Hydrogen Generation: Current Advances in Materials and Operando Characterization

Photoelectrochemical (PEC) hydrogen generation is a promising technology for green hydrogen production yet faces difficulties in achieving stability and efficiency. The scientific community is pushing toward the development of new electrode materials and a better understanding of the underlying reactions and degradation mechanisms. Advances in photocatalytic materials are being pursued through the development of heterojunctions, tailored crystal nanostructures, doping, and modification of solid-solid and solid-electrolyte interfaces. Operando and in situ techniques are utilized to deconvolute the charge transfer mechanisms and degradation pathways. In this review, both materials development and Operando characterization are covered for advancing PEC technologies. The recent advances made in the PEC materials are first reviewed including the applied improvement strategies for transition metal oxides, nitrites, chalcogenides, Si, and group III-V semiconductor materials. The efficiency, stability, scalability, and electrical conductivity of the aforementioned materials along with the improvement strategies are compared. Next, the Operando characterization methods and cite selected studies applied for PEC electrodes are described. Operando studies are very successful in elucidating the reaction mechanisms, degradation pathways, and charge transfer phenomena in PEC electrodes. Finally, the standing challenges and the potential opportunities are discussed by providing recommendations for designing more efficient and electrochemically stable PEC electrodes.

Chalcogenides and Chalcogenide-Based Heterostructures as Photocatalysts for Water Splitting

Chalcogenides are essential in the conversion of solar energy into hydrogen fuel due to their narrow band gap energy. Hydrogen fuel could resolve future energy crises by substituting carbon fuels owing to zero-emission carbon-free gas and its eco-friendliness. The fabrication of different metal chalcogenide-based photocatalysts with enhanced photocatalytic water splitting have been summarized in this review. Different modifications of these chalcogenides, including coupling with another semiconductor, metal loading, and doping, are fabricated with different synthetic routes that can remarkably improve the photo-exciton separation and have been extensively investigated for photocatalytic hydrogen generation. In this direction, this review is undertaken to provide an overview of the enhanced photocatalytic performance of the binary and ternary chalcogenide heterostructures and their mechanisms for hydrogen production under irradiation of light.

Recent advances in solution assisted synthesis of transition metal chalcogenides for photo-electrocatalytic hydrogen evolution

Hydrogen evolution from water splitting is considered to be an important renewable clean energy source and alternative to fossil fuels for future energy sustainability. Photocatalytic and electrocatalytic water splitting is considered to be an effective method for the sustainable production of clean energy, H₂. This perspective especially emphasizes research advances in the solution-assisted synthesis of transition metal chalcogenides for both photo and electrocatalytic hydrogen evolution applications. Transition metal chalcogenides (CdS, MoS₂, WS₂, TiS₂, TaS₂, ReS₂, MoSe₂, and WSe₂) have received intensified research interest over the past two decades on account of their unique properties and great potential across a wide range of applications. The photocatalytic activity of transition metal chalcogenides can further be improved by elemental doping, heterojunction formation with noble metals (Au, Pt, etc.), non-chalcogenides (MoS₂, In₂S₃, NiS_1-X), morphological tuning, through various solution-assisted synthesis processes, including liquid-phase exfoliation, heat-up, hot-injection methods, hydrothermal/solvothermal routes and template-mediated synthesis processes. In this review we will discuss recent developments in transition metal chalcogenides (TMCs), the role of TMCs for hydrogen production and various strategies for surface functionalization to increase their activity, different synthesis methods, and prospects of TMCs for hydrogen evolution. We have included a brief discussion on the effect of surface hydrogen binding energy and Gibbs free energy change for HER in electrocatalytic hydrogen evolution.

Molybdenum Disulfide-Based Nanomaterials for Visible-Light-Induced Photocatalysis

Visible-light-responsive photocatalytic materials have a multitude of important applications, ranging from energy conversion and storage to industrial waste treatment. Molybdenum disulfide (MoS₂) and its variants exhibit high photocatalytic activity under irradiation by visible light as well as good stability and recyclability, which are desirable for all photocatalytic applications. MoS₂-based materials have been widely applied in various fields such as wastewater treatment, environmental remediation, and organic transformation reactions because of their excellent physicochemical properties. The present review focuses on the fundamental properties of MoS₂, recent developments and remaining challenges, and key strategies for tackling issues related to the utilization of MoS₂ in photocatalysis. The application of MoS₂-based materials in visible-light-induced catalytic reactions for the treatment of diverse kinds of pollutants including industrial, environmental, pharmaceutical, and agricultural waste are also critically discussed. The review concludes by highlighting the prospects of MoS₂ for use in various established and emerging areas of photocatalysis.

Recent progress of heterostructures based on two dimensional materials and wide bandgap semiconductors

Recent progress in the synthesis and assembly of two-dimensional (2D) materials has laid the foundation for various applications of atomically thin layer films. These 2D materials possess rich and diverse properties such as layer-dependent band gaps, interesting spin degrees of freedom, and variable crystal structures. They exhibit broad application prospects in micro-nano devices. In the meantime, the wide bandgap semiconductors (WBS) with an elevated breakdown voltage, high mobility, and high thermal conductivity have shown important applications in high-frequency microwave devices, high-temperature and high-power electronic devices. Beyond the study on single 2D materials or WBS materials, the multi-functional 2D/WBS heterostructures can promote the carrier transport at the interface, potentially providing novel physical phenomena and applications, and improving the performance of electronic and optoelectronic devices. In this review, we overview the advantages of the heterostructures of 2D materials and WBS materials, and introduce the construction methods of 2D/WBS heterostructures. Then, we present the diversity and recent progress in the applications of 2D/WBS heterostructures, including photodetectors, photocatalysis, sensors, and energy related devices. Finally, we put forward the current challenges of 2D/WBS heterostructures and propose the promising research directions in the future.

Direct Z-scheme SiNWs@Co3O4 photocathode with a cocatalyst of sludge-derived carbon quantum dots for efficient photoelectrochemical hydrogen production

Solar driven photoelectrochemical (PEC) hydrogen production has attracted considerable attention, but the design of highly efficient, robust and low-cost photocathode still remains a significant challenge. Herein, we report a novel SiNWs@Co₃O₄Z-scheme heterojunction photocathode with carbon quantum dots eco-friendly derived from sludge (SCQDs) as the co-catalyst. The photocathode not only leads to effective separation of electron-hole pair, lower transmission resistance, and longer lifetime of charge carriers, but also elevates the stability by preventing direct contact between the SiNWs and the electrolyte as well as the self-oxidation. Simultaneously, the excellent electron transport properties of the SCQDs further improved the PEC performance. Correspondingly, a maximum current density of 14.88 mA·cm^-2 was obtained at -0.67 V with the applied bias photon-to-current efficiency (ABPE) achieving 8.4% under visible light irradiations at pH = 7. This work provides a promising scheme for Si-based photocathodes for PEC hydrogen production with a high performance, reliable stability, and low-cost.

Highly Sensitive and Selective Photoelectrochemical Aptasensors for Cancer Biomarkers Based on MoS2/Au/GaN Photoelectrodes

An Au/GaN photoelectrode was prepared by sputtering 30 nm thick Au film on the surface of n-type gallium nitride (GaN). When the electrode contacts with multilayered molybdenum disulfide (MoS₂), photogenerated electrons and photogenerated holes transfer to MoS₂ because of the band gap matching of MoS₂ and GaN. The presence of Au promotes charge transfer and results in a greater recombination of electrons and holes; by this means, a more significant suppression of photocurrent can be detected. This characteristic has been coupled with the high selectivity of an aptamer and applied to develop a novel photoelectrochemical aptasensor for cancer biomarkers (alpha-fetoprotein (AFP) as a model). The aptamer of AFP was modified on the surface of the Au/GaN photoelectrode by Au-S bonds, which can bind to the target protein with high selectivity. Then, the transfer process of the charge carriers of GaN to MoS₂ can be blocked by the target protein so that the suppression of photocurrent is reduced. The difference of the photocurrent in the presence and absence of AFP (ΔI) showed a linear relationship with AFP concentration that ranged from 1.0-150 ng/mL (R² = 0.9995), and the detection limit was 0.3 ng/mL. The standard addition recovery rates ranged from 85.2 to 91.7%. The method possessed good sensitivity and high selectivity for AFP detection. The developed biosensor can be modified to detect other cancer biomarkers by simply replacing the aptamer used.

Highly Efficient Photoelectrochemical Water Splitting Using GaN-Nanowire Photoanode with Tungsten Sulfides

In the present study, we have achieved high-performance photoelectrochemical water splitting (PEC-WS) using GaN nanowires (NWs) coated with tungsten sulfide (W_xS_1-x) (GaN-NW-W_xS_1-x) as a photoanode. The measured current density and applied-bias photon-to-current efficiency were 20.38 mA/cm² and 13.76%, respectively. These values were much higher than those reported previously for photoanodes with any kind of III-nitride nanostructure. The amount of hydrogen gas formed was 1.01 mmol/cm² from 7 h PEC-WS, which was also much higher than the previously reported values. The drastic improvement in the PEC-WS performance using the GaN-NW-W_xS_1-x photoanode was attributed to an increase in the number of photogenerated carriers due to the highly crystalline GaN NWs, and acceleration of separation of photogenerated carriers and consequent suppression of charge recombination because of nitrogen-terminated surfaces of NWs, sulfur vacancies in W_xS_1-x, and type-II band alignment between NW and W_xS_1-x. The degree of impedance matching, evaluated from Nyquist plots, was considered to analyze charge transfer characteristics at the interface between the GaN-NW-W_xS_1-x photoanode and 0.5-M H₂SO₄ electrolyte. Considering the material system and scheme for the PEC-WS, our approach provides an efficient way to improve hydrogen evolution reaction.

Modified p-GaN Microwells with Vertically Aligned 2D-MoS2 for Enhanced Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting has been considered as the future technology for storing solar energy in the chemical bonds. However, due to the search of ideal heterostructured materials for photoanode/cathode, the full potential of this technology has not been realized yet. Herein we present, the nanotextured hexagonal microwell of p-GaN [p-GaN(Et)] synthesized via wet chemical etching route as a photocathode (PC) for PEC water splitting. The p-GaN(Et) was further modified by interconnected nanowall network of two-dimensional (2D) transition metal dichalcogenide (MoS₂) [2D-MoS₂/p-GaN(Et)]. Both PCs were characterized for their morphology, structures, and optical and electronic properties. The overall PEC performance was validated through photocurrent values followed by the amount of hydrogen and oxygen evolution. This combination of 2D-MoS₂/p-GaN(Et) outplayed pristine p-GaN(Et) by several orders of magnitude in overall PEC performance. The extraordinary stability under a continuous operating condition with 1 sun illumination (100 mW/cm²) provides the much-needed flavor of an efficient photocathode. The optimized photocathode [2D-MoS₂/p-GaN(Et)] shows the highest applied bias photon-to-current conversion efficiency of ∼3.18% with hydrogen evolution rate of 89.56 μmol/h at -0.3 V vs RHE. This wafer-level cost-effective synthesis of 2D-MoS₂/GaN heterostructure based PCs opens a new way for large-scale solar-fuel conversion.