A comparative study on the mechanical, physical and morphological properties of cement-micro/nanoFe3O4 composite

Facile In-Situ photocatalytic reduction of AuNPs on multilayer Core-Shell Fe3O4@SiO2@PDA magnetic nanostructures and their SERS application

Surface-enhanced Raman scattering (SERS) is a promising analytical technique for the rapid, sensitive, and repeatable detection in various SERS application fields. Herein, a new type of potential magnetically recyclable SERS substrate was designed and rapidly synthesized via a facile three-step template method. First, the magnetic ferroferric oxide (Fe3O4) cores were prepared by a convenient solvothermal approach, and coated with a thin layer of silica by a sol-gel process in order to improve their stability in complicated environments. Next, the negatively charged polydopamine (PDA)/K6[SiW11VIVO40]·7H2O (PDA/SiW11V) outer shell was assembled upon the magnetic Fe3O4@SiO2 core-shell nanoparticles via a layer-by-layer sequential adsorption process using the stickiness of PDA. The SiW11V multilayer shell can be used as the subsequent photocatalytic reduction precursors for the in-situ loading of high-density gold nanoparticles (AuNPs), without any other organic additives. The AuNPs decorated multilayer core-shell Fe3O4@SiO2@PDA magnetic nanostructures were employed as a potential magnetically recyclable SERS substrate, and showed excellent SERS performance. Using crystal violet (CV) as a model target, the as-fabricated AuNPs modified multilayer core-shell Fe3O4@SiO2@PDA magnetic nanostructures SERS substrates exhibited significant enhancement, and pushed the detection limit down to 10-12 M. Aside from the ultrahigh sensitivity, these SERS substrates also possess an excellent reproducibility (relative standard deviation (RSD) ∼ 8.3%), long-term stability (75 days), and unique chemical stability capability in different organic solvents and different environments with pH ≤ 10. Furthermore, a real-life application is also performed by the detection of melamine in spiked milk solution using the as-prepared magnetic nanostructures SERS-active substrates (limit of detection (LOD), 10-8 M). These results highlight that the rational design and controllable synthesis of multifunctional magnetic SERS substrates is a promising strategy in many different application fields such as biosensing, photoelectrocatalysis, and medical diagnosis.

Effects of Iron Minerals on the Compressive Strengths and Microstructural Properties of Metakaolin-Based Geopolymer Materials

The current study aims to investigate the influence of iron minerals on the amorphous phase content, compressive strengths and the microstructural properties of the geopolymer materials. Geopolymer materials were prepared by the substitution of metakaolin by 10 and 20 wt.% of each iron mineral sample. Sodium waterglass from rice husk ash was used as a hardener, and metakaolin was used as an aluminosilicate source. The X-ray patterns show that the iron minerals denoted FR and FB are associated with hematite and magnetite, respectively. FY contains goethite together with a significant content of kaolinite and quartz. It is observed in the XRD patterns and FTIR absorption spectra that the additions of hematite, magnetite and goethite remain largely unreacted in the geopolymer binder. The compressive strengths of the related geopolymer composites show some significant variations indicating certain effects for mechanical stability obtained: 10 wt.% replacement of metakaolin by hematite increased the compressive strength from 51.1 to 55.5 MPa, while 20 wt.% hematite caused a decrease to 44.9 MPa. Furthermore, 10 and 20 wt.% replacement with FB revealed decreased values 47.0 and 40.3 MPa, respectively. It was also found that 10 and 20 wt.% of FY caused lower values of 30.9 and 39.1 MPa, respectively. The micrographs of geopolymer materials present some voids and cracks. The denser matrix is related to a superior gel formation producing a better glue between the crystalline additions. The unsubstituted geopolymer sample provides with about 50% the highest X-ray-amorphous content, whereas the substituted samples range between 35 and 45%, indicating systematically smaller gel contents without any clear trend with the compressive strength variation, however. The strength dependencies reveal more complex interaction between the gel and crystalline additions.

Effect of Morphologically Controlled Hematite Nanoparticles on the Properties of Fly Ash Blended Cement

Several types of hematite nanoparticles (α-Fe₂O₃) have been investigated for their effects on the structure and properties of fly ash (FA) blended cement. All synthesized nanoparticles were found to be of spherical shape, but of different particle sizes ranging from 10 to 195 nm depending on the surfactant used in their preparation. The cement hydration with time showed 1.0% α-Fe₂O₃ nanoparticles are effective accelerators for FA blended cement. Moreover, adding α-Fe₂O₃ nanoparticles in FA blended cement enhanced the compressive strength and workability of cement. Nanoparticle size and size distribution were important for optimal filling of various size of pores within the cement structure.

Physical Properties and Durability of Lime-Cement Mortars Prepared with Water Containing Micro-Nano Bubbles of Various Gases

The paper presents the experimental studies on the effect of the water containing micro-nano bubbles of various gases on the physico-mechanical properties of lime-cement mortars. In total, 7 types of mortars were prepared: with water containing the micro-nano bubbles of O₂, O₃ or CO₂ as 50% or 100% substitute of ordinary mixing water (tap water) and the reference mortar prepared using tap water. In order to determine the influence of water with micro-nano bubbles of gases, the consistency of fresh mortar and the physical properties of hardened mortar, i.e., specific and apparent density, total porosity, water absorption by weight and capillary absorption, were established. The mechanical strength of the considered mortars was studied as well by conducting the tests for flexural and compressive strengths following 14, 28 and 56 days. Reduced workability and capillary absorption were observed in the modified mortars within the range of 0.9-8.5%. The mortars indicated an increase in the flexural strength after 28 days ranging from 3.4% to 23.5% and improved compressive strength in 1.2-31%, in comparison to the reference mortar. The conducted studies indicated increased flexural and compressive strengths along with the share of micro-nano bubbles of gases in the mixing water.

Lyophilized Emulsions in the Form of 3D Porous Matrices as a Novel Material for Topical Application

Researchers are constantly searching for innovations that can be applied to the cosmetic industry. Production of porous materials stored in a lyophilized form and swollen directly before use may be beneficial considering their facilitated packaging, transport and storage. In this study, we propose porous materials based on sodium alginate, gelatin, glycerol and lipids (cottonseed oil and beeswax) obtained by freeze-drying and cross-linking. Material composition with the most promising properties was modified by the addition of PLA microparticles with Calendula officinalis flower extract. The structure and properties of obtained porous materials were analyzed. ATR-FTIR, mechanical properties, residual moisture content, porosity and density were assessed, as well as swelling properties and degradation after their cross-linking. The loading capacity and in vitro release of Calendula officinalis flower extract were performed for samples with incorporated PLA microparticles containing plant extract. The modification of the composition and fabrication method of materials significantly influenced their physicochemical properties. The selected plant extract was successfully incorporated into polymeric microparticles that were subsequently added into developed materials. Prepared materials may be considered during designing new cosmetic formulations.

A new approach to dispersing and stabilizing graphene in aqueous nanofluids of enhanced efficiency of energy-systems

Owing to its severe hydrophobicity, graphene (G) as on dispersed in a fluid usually deposits therein after a short interval of time. Understanding the G-behavior and the factors affecting its deposition could pave a way for creating a substantially stable nanofluid (NF). In this work, a novel method of stabilizing a G-NF is described with selective examples. The results can be extended to develop the science and technology of G-NFs in general. Electrohydrodynamic forces are used as a controlling factor in the presence of magnetic nanoparticles (MNPs). Contrary to common chemical methods employed for preparing G-NFs, which depend on establishing bonds between the components, the physical method introduced in this article could be used as a novel approach not only to dispersing G in a fluid carrier but also to resolve the common problems originating from utilizing such chemical methods as increasing thermal resistance through adding various types of surfactants. The effects of various factors on the stability of the G-NFs are described. By increasing 50%, 100% and 170% of G, the G sitting rate increased by 43%, 82%, and 109%, respectively. With the addition of one, two and three layers to a G-monolayer, the G sitting rate grew by 77%, 153%, and 263%, respectively. Further, the G-behavior in the presence of MNPs and varied intensive electric fields were studied to optimize an electric field that could stabilize a single-layer G sheet in aqueous NFs. Adding MNPs promptly stabilizes a water/ethylene glycol/G NF in an applied electric field of 0.05 V/Å.