A novel highly active and reusable carbon based platinum-ruthenium nanocatalyst for dimethylamine-borane dehydrogenation in water at room conditions

The Catalytic Performance of Nanorod Nickel Catalyst in the Hydrolysis of Lithium Borohydride and Dimethylamine Borane

In the current global energy crisis, the value of hydrogen has become better appreciated. Metal borohydrides attract a lot of attention from researchers because they are rich in hydrogen. In this study, glass microscope slides were coated with nickel as nanorods for use as a catalyst by the magnetron sputtering method, and then catalytic hydrolysis reactions of dimethylamine borane and lithium borohydride were carried out to produce hydrogen. Parameters such as temperature, the amount of catalyst, lithium borohydride, or dimethylamine borane concentration were varied and their effects on the catalytic performances of the catalyst were examined. Moreover, the catalyst was characterized by field emission scanning electron microscopy and X-ray diffraction, and hydrolysis products were analyzed through field emission scanning electron microscopy with energy dispersive spectroscopy analyses. Reaction kinetic parameters were also determined. The activation energy values of dimethylamine borane and lithium borohydride were determined to be 40.0 kJ mol−1 and 63.74 kJ mol−1, respectively. Activation enthalpy values were also calculated as 37.34 kJ mol−1 and 62.45 kJ mol−1 for dimethylamine borane and lithium borohydride, respectively. Initial hydrogen production rates under different conditions were also investigated in the study. For both hydrolysis systems, the fastest hydrogen production rates were calculated as 109 mL gNi−1 min−1 and 103 mL gNi−1 min−1 for dimethylamine borane and lithium borohydride, respectively, in the experiment performed at 60 °C at 0.2 M substrate concentration and with 1.3 g of catalyst. These hydrolysis systems using this catalyst are good candidates for systems that need hydrogen.

High performing platinum—copper catalyst for self—breathing polymer electrolyte membrane fuel cell

Platinum (Pt) is the most common catalyst in Polymer Electrolyte Membrane Fuel Cells due to its ability to effectively promote the oxidation of hydrogen and reduction of oxygen. However, as a noble metal, the use of Pt should be minimized. Alloying Pt with low-cost transition metals is an effective strategy to improve catalytic activity and reduce Pt use. In this context, we report on a one-step synthesis of a Platinum/Copper (PtCu) catalyst, which can be used at both the anode and the cathode of a fuel cell. Catalysts with various Cu to Pt ratios were synthesised and in particular the PtCu catalyst at a Cu to Pt ratio of 0.5 demonstrated a high activity for hydrogen oxidation and oxygen reduction, i.e. 2.4 times superior to Pt alone. This enhanced catalytic activity was confirmed in a self-breathing PEMFC with a power output of 45.16 mW cm−2, which corresponds to a 1.4-fold increase compared to Pt alone. This is a significant improvement because 40% more power was obtained with 22% less Pt.

Graphical Abstract

The Hydrogen-Storage Challenge: Nanoparticles for Metal-Catalyzed Ammonia Borane Dehydrogenation

Dihydrogen is one of the sustainable energy vectors envisioned for the future. However, the rapidly reversible and secure storage of large quantities of hydrogen is still a technological and scientific challenge. In this context, this review proposes a recent state-of-the-art on H₂ production capacities from the dehydrogenation reaction of ammonia borane (and selected related amine-boranes) as a safer solid source of H₂ by hydrolysis (or solvolysis), catalyzed by nanoparticle-based systems. The review groups the results according to the transition metals constituting the catalyst with a mention to their current cost and availability. This includes the noble metals Rh, Pd, Pt, Ru, Ag, as well as cheaper Co, Ni, Cu, and Fe. For each element, the monometallic and polymetallic structures are presented and the performances are described in terms of turnover frequency and recyclability. The structure-property links are highlighted whenever possible. It appears from all these works that the mastery of the preparation of catalysts remains a crucial point both in terms of process, and control and understanding of the electronic structures of the elaborated nanomaterials. A particular effort of the scientific community remains to be made in this multidisciplinary field with major societal stakes.

Recent developments of nanocatalyzed liquid-phase hydrogen generation

Hydrogen is the most effective and sustainable carrier of clean energy, and liquid-phase hydrogen storage materials with high hydrogen content, reversibility and good dehydrogenation kinetics are promising in view of "hydrogen economy". Efficient, low-cost, safe and selective hydrogen generation from chemical storage materials remains challenging, however. In this Review article, an overview of the recent achievements is provided, addressing the topic of nanocatalysis of hydrogen production from liquid-phase hydrogen storage materials including metal-boron hydrides, borane-nitrogen compounds, and liquid organic hydrides. The state-of-the-art catalysts range from high-performance nanocatalysts based on noble and non-noble metal nanoparticles (NPs) to emerging single-atom catalysts. Key aspects that are discussed include insights into the dehydrogenation mechanisms, regenerations from the spent liquid chemical hydrides, and tandem reactions using the in situ generated hydrogen. Finally, challenges, perspectives, and research directions for this area are envisaged.

Retraction: Pt NPs@GO as a highly efficient and reusable catalyst for one-pot synthesis of acridinedione derivatives

Retraction for ‘Pt NPs@GO as a highly efficient and reusable catalyst for one-pot synthesis of acridinedione derivatives’ by Handan Pamuk et al., RSC Adv., 2015, 5, 49295–49300, DOI: 10.1039/C5RA06441D.