A new forensic tool to date human blood pools

Elemental and molecular characterization of degrading blood pools

Blood is a commonly encountered type of biological evidence and can provide critical information about the crime that occurred. The ability to accurately and precisely determine the time since deposition (TSD) of a bloodstain is highly sought after in the field of forensic science. Current spectral methods for determining TSD are typically developed using small volume bloodstains, we investigate the applicability to larger volume blood pools where drying and degradation mechanics are different. We explored the differences that exist between the surface and bulk of dried segments from fragments collected from 15 mL dried blood pools and identified heterogeneity using RGB colour analysis and hierarchical cluster analysis (HCA). The physical, molecular, and atomic differences between the layers were further investigated using scanning electron microscopy (SEM), X-Ray photoelectron spectroscopy (XPS), attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, and Raman spectroscopy. SEM identified different morphology on the surface and the bulk indicative of density-dependant cellular settling. XPS revealed that iron was not present on the surface but rather was present in the bulk where the red blood cells had settled. The oxidation state of the iron was quantified over three weeks in which it transitioned from entirely Fe2+ to primarily Fe3+, as expected for ex vivo degradation of hemoglobin. Further, indications of amide saponification occurring at the blood-air interface were identified in the increased quantity of the C-O moiety relative to CO, and the formation of free amines and OC-ONa groups over time. ATR-FTIR and Raman spectroscopy provided insights into differences in the molecular composition of the layers, suggesting that the surface consists of more nucleic acids, lipids, and glycoproteins than the bulk, which was dominated by proteins (p < 0.001% using principal component analysis (PCA)). Additionally, spectral band trends previously reported to have applicability to the estimation of TSD were observed for the bulk portion of the blood pool as the Hb underwent predictable time dependant changes from oxyHb to metHb. PCA was performed based on all spectral data which demonstrated statistically significant differences between the surface and bulk, as well as proof-of-concept for linear TSD estimation models.

Transition from Dendritic to Cell-like Crystalline Structures in Drying Droplets of Fetal Bovine Serum under the Influence of Temperature

The desiccation of biofluid droplets leads to the formation of complex deposits which are morphologically affected by the environmental conditions, such as temperature. In this work, we examine the effect of substrate temperatures between 20 and 40 °C on the desiccation deposits of fetal bovine serum (FBS) droplets. The final dried deposits consist of different zones: a peripheral protein ring, a zone of protein structures, a protein gel, and a central crystalline zone. We focus on the crystalline zone showing that its morphological and topographical characteristics vary with substrate temperature. The area of the crystalline zone is found to shrink with increasing substrate temperature. Additionally, the morphology of the crystalline structures changes from dendritic at 20 °C to cell-like for substrate temperatures between 25 and 40 °C. Calculation of the thermal and solutal Bénard-Marangoni numbers shows that while thermal effects are negligible when drying takes place at 20 °C, for higher substrate temperatures (25-40 °C), both thermal and solutal convective effects manifest within the drying drops. Thermal effects dominate earlier in the evaporation process leading, we believe, to the development of instabilities and, in turn, to the formation of convective cells in the drying drops. Solutal effects, on the other hand, are dominant toward the end of drying, maintaining circulation within the cells and leading to crystallization of salts in the formed cells. The cell-like structures are considered to form because of the interplay between thermal and solutal convection during drying. Dendritic growth is associated with a thicker fluid layer in the crystalline zone compared to cell-like growth with thinner layers. For cell-like structures, we show that the number of cells increases and the area occupied by each cell decreases with temperature. The average distance between cells decreases linearly with substrate temperature.

[Pharmacological actions of anifrolumab (Saphnelo®) and clinical trial results as a treatment for systemic lupus erythematosus]

Systemic lupus erythematosus (SLE) is an autoimmune disease which causes damaging inflammation in multiple organs via the accumulation of immune complexes. SLE pathogenesis is associated with type I interferons (IFNs), which are central and reflective of disease activity in SLE. Even before clinical development of disease, genetic and environmental contributions to IFN production lead to abnormal innate and adaptive immune activation. Through the Janus kinase-signal transducer and activator of transcription signaling pathway, IFN play a central role in the immunopathogenicity of SLE. Thus, IFN-blocking therapy may be used to regulate inflammation in individuals with SLE. Food and Drug Administration (FDA)-approved anifrolumab (Saphnelo^®), which is a human IgG1κ monoclonal antibody that binds to subunit 1 of the type I interferon receptor with high specificity and affinity, was also approved for the treatment of adult patients with moderate to severe SLE who are receiving standard therapy by Pharmaceuticals and Medical Device Agency (PMDA), in Japan in September 2021; anifrolumab is administered as an intravenous infusion, 300 mg over a 30-minute period, every 4 weeks. In this article, we reviewed the actions of type I IFN and anifrolumab as a treatment for SLE.

Using the likelihood ratio in bloodstain pattern analysis

There is an apparent paradox that the likelihood ratio (LR) approach is an appropriate measure of the weight of evidence when forensic findings have to be evaluated in court, while it is typically not used by bloodstain pattern analysis (BPA) experts. This commentary evaluates how the scope and methods of BPA relate to several types of evaluative propositions and methods to which LRs are applicable. As a result of this evaluation, we show how specificities in scope (BPA being about activities rather than source identification), gaps in the underlying science base, and the reliance on a wide range of methods render the use of LRs in BPA more complex than in some other forensic disciplines. Three directions are identified for BPA research and training, which would facilitate and widen the use of LRs: research in the underlying physics; the development of a culture of data sharing; and the development of training material on the required statistical background. An example of how recent fluid dynamics research in BPA can lead to the use of LR is provided. We conclude that an LR framework is fully applicable to BPA, provided methodic efforts and significant developments occur along the three outlined directions.

The Effect of Substrate Temperature on the Evaporative Behaviour and Desiccation Patterns of Foetal Bovine Serum Drops

The drying of bio-fluid drops results in the formation of complex patterns, which are morphologically and topographically affected by environmental conditions including temperature. We examine the effect of substrate temperatures between 20 °C and 40 °C, on the evaporative dynamics and dried deposits of foetal bovine serum (FBS) drops. The deposits consist of four zones: a peripheral protein ring, a zone of protein structures, a protein gel, and a central crystalline zone. We investigate the link between the evaporative behaviour, final deposit volume, and cracking. Drops dried at higher substrate temperatures in the range of 20 °C to 35 °C produce deposits of lower final volume. We attribute this to a lower water content and a more brittle gel in the deposits formed at higher temperatures. However, the average deposit volume is higher for drops dried at 40 °C compared to drops dried at 35 °C, indicating protein denaturation. Focusing on the protein ring, we show that the ring volume decreases with increasing temperature from 20 °C to 35 °C, whereas the number of cracks increases due to faster water evaporation. Interestingly, for deposits of drops dried at 40 °C, the ring volume increases, but the number of cracks also increases, suggesting an interplay between water evaporation and increasing strain in the deposits due to protein denaturation.

Phase separation during blood spreading

Blood pools can spread on several types of substrates depending on the surrounding environment and conditions. Understanding the influence of these parameters on the spreading of blood pools can provide crime scene investigators with useful information. The focus of the present study is on phase separation, that is, when the serum spreads outside the main blood pool. For this purpose, blood pools with constant initial masses on wooden floors that were either varnished or not were created at ambient temperatures of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$21~^{\circ }\hbox {C}$$\end{document}21∘C, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$29~^{\circ }\hbox {C}$$\end{document}29∘C, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$37~^{\circ }\hbox {C}$$\end{document}37∘C with a relative humidity varying from 20 to 90%. The range \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$21~^{\circ }\hbox {C}$$\end{document}21∘C to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$37~^{\circ }\hbox {C}$$\end{document}37∘C covers almost all worldwide indoor cases. The same whole blood from the same donor was used for all experiments. As a result, an increase in relative humidity was found to result in an increase in the final pool area. In addition, at the three different experimental temperatures, the serum spread outside the main pool at relative humidity levels above 50%. This phase separation is more significant on varnished substrates, and does not lead to any changes in the drying morphology. This phenomenon is explained by the competition between coagulation and evaporation.

Further Insights into Patterns from Drying Particle Laden Sessile Drops

The evaporation of colloidal dispersions is an elegant and straightforward route to controlled self-assembly of particles on a solid surface. In particular, the evaporation of particle laden drops placed on solid substrates has received considerable attention for more than two decades. Such particle filled drops upon complete evaporation of the solvent leave behind a residue, commonly called particulate deposit pattern. In these patterns, typically, more particles accumulate at the edge compared to the interior, a feature observed when coffee drops evaporate. Consequently, such evaporative patterns are called coffee stains. In this article, the focus is on the evaporation of highly dilute suspension drops containing particles of larger diameters ranging from 3 to 10 μm drying on solid substrates. This helps us to investigate the combined role of gravity-driven settling of particles and capillary flow-driven particle transport on pattern formation in drying drops. In the highly dilute concentration limit, the evaporative patterns are found to show a transition, from a monolayer deposit that consists of a single layer of particles, to a multilayer deposit as a function of particle diameter and initial concentration of particles in the drying drop. Moreover, the spatial distribution of particles as well as the ordering of particles in the deposit patterns are found to be particle size dependent. It is also seen that the order-disorder transition, a feature associated with the organization of particles at the edge of the deposit, observed typically at moderate particle concentrations, disappears at the highly dilute concentrations considered here. The evaporation of drops containing particles of 10 μm diameter, where the effect of gravity on the particle becomes significant, leads to uniform deposition of particles, i.e, suppression of the coffee-stain effect and to the formation of two-dimensional percolating networks.

Quantifying visible absorbance changes and DNA degradation in aging bloodstains under extreme temperatures

Physicochemical property changes observed in a degrading bloodstain can be used to estimate its time since deposition (TSD) and provide a timestamp to the sample's age. Many of the time-dependent processes that occur as a bloodstain degrades, such as DNA fragmentation and changes in hemoglobin structure, also exhibit temperature-dependent behaviours. Previous studies have demonstrated that pairing high-resolution automated gel electrophoresis and visible absorbance spectroscopy could be used to quantify the rate of degradation of a bloodstain in relation to time and storage substrate. Our study investigates such trends with an added factor, extreme temperatures. Passive drip stains were stored in either microcentrifuge tubes or on FTA cards at either -20°C, 21°C or 40°C and tested over 11 time points spanning 15 days. For both storage substrates, the wavelength at maximum absorbance for the Soret band and the maximum absorbance of the Alpha band showed a negative trend over time suggesting that spectral shifts are informative for TSD estimates. The ratio of the maximum peak height for DNA fragments lengths of 500-1000 base pairs to 1000-5000 base pairs was the most informative DNA variable in relation to time for both substrates. Cross-validation suggested the appropriate fit of the models with the data and reasonable predictive ability. We integrated both DNA concentration and hemoglobin visible absorbance metrics using principal component analysis (PCA) into a single model. Adding the random effect of the donor to the PCA model accounted for a large portion of the variation as did storage method and temperature. Additionally, canonical correspondence showed that temperature corresponded differently to the response variables for FTA card and microcentrifuge tube samples, suggesting a substrate specific effect. This study confirms that pairing DNA concentration and hemoglobin's visible absorbance can provide insight on the effect of different environmental and storage conditions on bloodstain degradation. While the level of uncertainty surrounding TSD estimates still precludes its use in the field, this study provides a valuable framework that improves our understanding of variation surrounding TSD estimates, which will be critical to any eventual application.