Photocatalytic degradation of oily waste and phenol from a local South Africa oil refinery wastewater using response methodology

Analysis of Photocatalytic Degradation of Phenol by Zinc Oxide Using Response Surface Methodology

In this study, the photocatalytic degradation of phenol, which is commonly found in industrial wastewater at high rates, was investigated using a zinc oxide (ZnO) catalyst. It is thought that our findings will contribute to the removal of phenol in industrial wastewater. The experimental study was conducted in a batch-type air-fed cylindrical photocatalytic reactor, and a central composite design (CCD) was chosen and analyzed using response surface methodology (RSM). The study aimed to explore the effects of initial phenol concentration, catalyst concentration, airflow rate, and degradation time on the photocatalytic degradation of phenol and the removal efficiency of total organic carbon (TOC). A quadratic regression model was developed to establish the relationship between phenol degradation, TOC removal effectiveness, and the four factors mentioned. The validity of the model was assessed through an analysis of variance (ANOVA). A good agreement was observed between the model results and the experimental data. As a result of the experiments carried out under optimized conditions, the degradation percentage of phenol was found to be 77.15 %, and the degradation percentage of TOC was 59.87 %. Additionally, pseudo-first-order kinetics were used in the photocatalytic degradation of phenol.

Bioremediation of polycyclic aromatic hydrocarbons contaminated soils: recent progress, perspectives and challenges

The life of all creatures is supported directly or indirectly by soil, which is a significant environmental matrix. The soil has been polluted partly due to increased human activities and population growth, releasing several foreign substances and persistent contaminants. When toxic substances like polycyclic aromatic hydrocarbons (PAHs) are disposed of, the characteristics of the soil are changed, microbial biodiversity is impacted, and items are destroyed. Because of the mutagenicity, carcinogenicity, and toxicity of petroleum hydrocarbons, the restoration and cleanup of PAH-polluted areas represent a severe technological and environmental challenge for long-term growth and development. Although there are several ways to clean up PAH-contaminated soils, much attention is paid to intriguing bacteria, fungus, and their enzymes. Various factors influence PAH breakdown, including pH, temperature, airflow, moisture level, nutrient availability, and degrading microbial populations. This review discusses how PAHs affect soil characteristics and shows that secondary metabolite and carbon dioxide decomposition are produced due to microbial breakdown processes. Furthermore, the advantages of bioremediation strategies were assessed for correct evaluation and considered dependable on each legislative and scientific research level, as analyzed in this review.

Hydrodynamic performance assessment of photocatalytic reactor with baffles and roughness in the flow path: A modelling approach with experimental validation

Purification of wastewater is essential for human being as well as for the flora and fauna, and sustainable environment. Photocatalytic reactor with TiO2 coated layer can be used to degrade the pollutants but without proper pollutant mass transfer in the reactive surface, photocatalytic reactor decreases its effectiveness. The baffles and rough surface in the flow path can improve the fluid mixing to enhance pollutant mass transfer to improve the reactor's performance. In this study, a computational fluid dynamics (CFD) model has been developed to investigate the effect of four top baffles and three rough surfaces (semi-circular, triangle, and rectangle) on pressure drops, mass transfer and the hydrodynamic performance of the reactor. The experimental investigation was carried out using Formic Acid (FA) as pollutant in feed water for model validation. The simulated result varies only within 5% with the experimental data of FA concentration versus feed flow rate and fluid velocity. The model was run at fluid velocity of 0.15 m/s and 0.5 m/s (Reynolds number of 2150 (laminar flow) and 7500 (turbulent flow), respectively. The simulation result shows that the addition of baffles and roughness on the reactive surfaces increases the turbulent kinetic energy (minimum increase 8%) and consequently increases the mass transfer (maximum increase 37%) of the pollutant. The highest wall shear was observed to be 40 Pa when both square and triangular elements were used as roughness elements at turbulent flow condition. The results also shows that the highest pressure-drop of 8 kPa was found when the square roughness element was used at turbulent flow condition. Overall, the photocatalytic reactor performance is significantly enhanced by the application of combined baffles and roughness elements in the reactive surface.

Kinetic and Thermodynamic Study of Methylene Blue Adsorption on TiO2 and ZnO Thin Films

In this work, we fabricated and characterized ZnO and TiO₂ thin films, determining their structural, optical, and morphological properties. Furthermore, we studied the thermodynamics and kinetics of methylene blue (MB) adsorption onto both semiconductors. Characterization techniques were used to verify thin film deposition. The semiconductor oxides reached different removal values, 6.5 mg/g (ZnO) and 10.5 mg/g (TiO₂), after 50 min of contact. The pseudo-second-order model was suitable for fitting the adsorption data. ZnO had a greater rate constant (45.4 × 10^-3) than that of TiO₂ (16.8 × 10^-3). The removal of MB by adsorption onto both semiconductors was an endothermic and spontaneous process. Finally, the stability of the thin films showed that both semiconductors maintained their adsorption capacity after five consecutive removal tests.

The Usability of Sorbents in Restoring Enzymatic Activity in Soils Polluted with Petroleum-Derived Products

Due to their ability to adsorb or absorb chemical pollutants, including organic compounds, sorbents are increasingly used in the reclamation of soils subjected to their pressure, which results from their high potential in eliminating xenobiotics. The precise optimization of the reclamation process is required, focused primarily on restoring the condition of the soil. This research are essential for seeking materials sufficiently potent to accelerate the remediation process and for expanding knowledge related to biochemical transformations that lead to the neutralization of these pollutants. The goal of this study was to determine and compare the sensitivity of soil enzymes to petroleum-derived products in soil sown with Zea mays, remediated using four sorbents. The study was conducted in a pot experiment, with loamy sand (LS) and sandy loam (SL) polluted with VERVA diesel oil (DO) and VERVA 98 petrol (P). Soil samples were collected from arable lands, and the effects of the tested pollutants were compared with those used as control uncontaminated soil samples in terms of Zea mays biomass and the activity of seven enzymes in the soil. The following sorbents were applied to mitigate DO and P effects on the test plants and enzymatic activity: molecular sieve (M), expanded clay (E), sepiolite (S), and Ikasorb (I). Both DO and P exerted a toxic effect on Zea mays, with DO more strongly disturbing its growth and development and the activities of soil enzymes than P. In sandy clay (SL), P was found to be a significant inhibitor of dehydrogenases (Deh), catalase (Cat), urease (Ure), alkaline phosphatase (Pal), and arylsulfatase (Aryl) activities, while DO stimulated the activity of all enzymes in this soil. The study results suggest that the sorbents tested, mainlya molecular sieve, may be useful in remediating DO-polluted soils, especially when alleviating the effects of these pollutants in soils of lower agronomic value.

Degradation of phenolic pollutants by persulfate-based advanced oxidation processes: metal and carbon-based catalysis

Wastewater recycling is a solution to address the global water shortage. Phenols are major pollutants in wastewater, and they are toxic even at very low concentrations. Advanced oxidation process (AOP) is an emerging technique for the effective degradation and mineralization of phenols into water. Herein, we aim at giving an insight into the current state of the art in persulfate-based AOP for the oxidation of phenols using metal/metal-oxide and carbon-based materials. Special attention has been paid to the design strategies of high-performance catalysts, and their advantages and drawbacks are discussed. Finally, the key challenges that govern the implementation of persulfate-based AOP catalysts in water purification, in terms of cost and environmental friendliness, are summarized and possible solutions are proposed. This work is expected to help the selection of the optimal strategy for treating phenol emissions in real scenarios.

A Case Study of Swine Wastewater Treatment via Electrochemical Oxidation by Ti4O7 Anode

With the rapid development of breeding industry, the efficient treatment of dramatically increasing swine wastewater is gradually becoming urgent. In particular, the development of application technologies suitable for the relatively small piggeries is critical due to the time cost and space requirements of conventional biological methods. In this study, Electrochemical oxidation (EO) was selected to systematically explore the treatment performance of three different swine wastewaters by Ti₄O₇ anode. It was observed that the colors changed from dark brown to light yellow after 60 min treatment at 50 mA/cm², and the removal rates of turbidity and suspended solids ranged from 89.36% to 93.65% and 81.31% to 92.55%, respectively. The chemical oxygen demand (COD), ammonia nitrogen (NH₃-N) and total phosphorus (TP) of all the three swine wastewaters were simultaneously removed to a very low concentration in 120 min, especially for sample III, 61 ± 9 mg/L of COD, 6.6 ± 0.4 mg/L of NH₃-N and 5.7 ± 1.1 mg/L of TP, which met the Discharge Standard of Pollutants for Livestock and Poultry Breeding (GB 18596-2001). Moreover, 70.93%-85.37% mineralization rates were also achieved in 120 min, confirming that EO treatment by Ti₄O₇ could efficiently remove the organic matters in wastewater. Excitation-emission matrix (EEM) and UV-vis spectrum characterization results further proved that aromatic compounds and macromolecules in wastewater were rapidly removed, which played important roles in the mineralization processes. The findings here provided an efficient and environment-friendly technology for swine wastewater treatment.

Recent Advances in Photocatalytic Oxidation of Methane to Methanol

Methane is one of the promising alternatives to non-renewable petroleum resources since it can be transformed into added-value hydrocarbon feedstocks through suitable reactions. The conversion of methane to methanol with a higher chemical value has recently attracted much attention. The selective oxidation of methane to methanol is often considered a “holy grail” reaction in catalysis. However, methanol production through the thermal catalytic process is thermodynamically and economically unfavorable due to its high energy consumption, low catalyst stability, and complex reactor maintenance. Photocatalytic technology offers great potential to carry out unfavorable reactions under mild conditions. Many in-depth studies have been carried out on the photocatalytic conversion of methane to methanol. This review will comprehensively provide recent progress in the photocatalytic oxidation of methane to methanol based on materials and engineering perspectives. Several aspects are considered, such as the type of semiconductor-based photocatalyst (tungsten, titania, zinc, etc.), structure modification of photocatalyst (doping, heterojunction, surface modification, crystal facet re-arrangement, and electron scavenger), factors affecting the reaction process (physiochemical characteristic of photocatalyst, operational condition, and reactor configuration), and briefly proposed reaction mechanism. Analysis of existing challenges and recommendations for the future development of photocatalytic technology for methane to methanol conversion is also highlighted.

Modeling RSM of photocatalytic treatment of Acid Red 18 pollutant using ZnO–Cr nano-photocatalyst, kinetic studies, and energy management

The ZnO–Cr nano-photocatalyst was synthesized using a microwave-assisted solution combustion method and applied for the photodegradation of the organic pollutant Acid Red 18 (AR18). The synthesized nano-photocatalyst was characterized by XRD, FESEM, EDX, and FTIR methods. To reach the optimal condition of the treatment, the response surface methodology was used in the central composite design model. The amount of nano-photocatalyst, pH of the solution, and initial concentration of the pollutant were optimized. The polynomial 3-degree model was fitted to the photodegradation data, and the correlation coefficients of the model showed an interaction between the parameters. Optimization of the polynomial model for pollutant treatment was investigated under the same conditions, and the comparison of the observed and predicted treatment models showed a low difference in decolorization. The intermediates were identified by liquid chromatography/mass spectrometry. A kinetic study showed that the first-order kinetic constant for the degradation of pollutant concentrations from 10 to 30 mg L−1 changed from 0.0178 to 0.0058 min–1. Finally, economic evaluation and energy management of the process showed that the decolorization process was more economical at low pollutant concentrations.

Application of Biochar as Functional Material for Remediation of Organic Pollutants in Water: An Overview

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.

Predicting kinetics of water-rich permeate flux through photocatalytic mesh under visible light illumination

Membrane-based separation technologies are attractive to remediating unconventional water sources, including brackish, industrial, and municipal wastewater, due to their versatility and relatively high energy efficiency. However, membrane fouling by dissolved or suspended organic substances remains a primary challenge which can result in an irreversible decline of the permeate flux. To overcome this, membranes have been incorporated with photocatalytic materials that can degrade these organic substances deposited on the surface upon light illumination. While such photocatalytic membranes have demonstrated that they can recover their inherent permeability, less information is known about the effect of photocatalysis on the kinetics of the permeate flux. In this work, a photocatalytic mesh that can selectively permeate water while repelling oil was fabricated by coating a mixture of nitrogen-doped TiO2 (N-TiO2) and perfluorosilane-grafted SiO2 (F-SiO2) nanoparticles on a stainless steel mesh. Utilizing the photocatalytic mesh, the time-dependent evolution of the water-rich permeate flux as a result of photocatalytic degradation of the oil was studied under the visible light illumination. A mathematical model was developed that can relate the photocatalytic degradation of the organic substances deposited on a mesh surface to the evolution of the permeate flux. This model was established by integrating the Langmuir-Hinshelwood kinetics for photocatalysis and the Cassie-Baxter wettability analysis on a chemically heterogeneous mesh surface into a permeate flux relation. Consequently, the time-dependent water-rich permeate flux values are compared with those predicted by using the model. It is found that the model can predict the evolution of the water-rich permeate flux with a goodness of fit of 0.92.

Effect of Cu doping on the photocatalytic activity of InVO4 for hazardous dye photodegradation under LED light and its mechanism

Cu doped InVO₄ (xCu-InVO₄ (x = 0.06-0.15 wt %) was synthesized by a facile one-pot hydrothermal method for the removal of methylene blue (MB) under LED light irradiation. The X-ray photoelectron spectroscopy (XPS) analysis indicated the coexistence of V⁵⁺ and V⁴⁺ species due to the O-deficient nature of the xCu-InVO₄. The synthesized photocatalysts displayed a morphology of spherical and square shaped particles (20-40 nm) and micro-sized rectangle rods with a length range of 100-200 μm. The xCu-InVO₄ exhibited superior adsorption and photodegradation efficiency compared to pristine InVO₄ and TiO₂ due to the presence of O₂ vacancies, V⁴⁺/V⁵⁺ species, and Cu dopant. The optimum reaction conditions were found to be 5 mg L^-1 (MB concentration), pH 6, and 100 mg of photocatalyst mass with a removal efficiency and mineralization degree of 100% and 96.67%, respectively. The main active species responsible for the degradation of MB were ^•OH radicals and h⁺. Reusability studies indicated that the 0.13Cu-InVO₄ was deactivated after a single cycle of photocatalytic reaction due to significant leaching of V⁴⁺ and Cu²⁺ species.

Analysis of Photocatalytic Degradation of Phenol with Exfoliated Graphitic Carbon Nitride and Light-Emitting Diodes Using Response Surface Methodology

Response surface methodology (RSM) involving a Box–Benkhen design (BBD) was employed to analyze the photocatalytic degradation of phenol using exfoliated graphitic carbon nitride (g-C3N4) and light-emitting diodes (wavelength = 430 nm). The interaction between three parameters, namely, catalyst concentration (0.25–0.75 g/L), pollutant concentration (20–100 ppm), and pH of the solution (3–10), was examined and modeled. An empirical regression quadratic model was developed to relate the phenol degradation efficiency with these three parameters. Analysis of variance (ANOVA) was then applied to examine the significance of the model; this showed that the model is significant with an insignificant lack of fit and an R2 of 0.96. The statistical analysis demonstrated that, in the studied range, phenol concentration considerably affected phenol degradation. The RSM model shows a significant correlation between predicted and experimental values of photocatalytic degradation of phenol. The model’s accuracy was tested for 50 ppm of phenol under optimal conditions involving a catalyst concentration of 0.4 g/L catalysts and a solution pH of 6.5. The model predicted a degradation efficiency of 88.62%, whereas the experimentally achieved efficiency was 83.75%.

Zn(II)-tetracarboxy-phthalocyanine-Sensitized TiO2 Thin Films as Antimicrobial Agents under Visible Irradiation: a Combined DFT and Experimental Study

In this article, we studied the antimicrobial activity of TiO2 sensitized by the Zn(II)-tetracarboxy-phthalocyanine (TcPcZn) complex using TiO2-Degussa P25 as a semiconductor source. The TiO2 thin films were deposited by the doctor blade method and were sensitized by the chemisorption process. The obtained compounds were characterized using Fourier transform infrared spectroscopy, UV-vis spectrophotometry, Raman spectroscopy, diffuse reflectance spectroscopy, and scanning electron microscopy. Furthermore, we studied the stability of the adsorbed sensitizer on the semiconductor surface by using the density functional theory (DFT). Additionally, we determined the antimicrobial activity of TcPcZn-TiO2 against methicillin-resistant Staphylococcus aureus (MRSA). The Raman and optical results confirmed the sensitizing process. The TcPcZn-TiO2 thin films showed radiation absorption in the visible range of the electromagnetic spectrum (600-750 nm), and the dye anchored on the TiO2 surface had a band gap of 1.58 eV. The DFT study showed that TcPcZn supported on any phase of Degussa P25 is stable, making them suitable to act as catalysts in the proposed reactions. Finally, the TcPcZn-TiO2 thin films reached 76.5% of inhibition activity against MRSA.

Response Surface Methodology: Photocatalytic Degradation Kinetics of Basic Blue 41 Dye Using Activated Carbon with TiO2

Water decontamination still remains a major challenge to some developing countries not having centralized wastewater systems. Therefore, this study presents the optimization of photocatalytic degradation of Basic Blue 41 dye in an aqueous medium by an activated carbon (AC)-TiO₂ photocatalyst under UV irradiation. The mesoporous AC-TiO₂ synthesized by a sonication method was characterized by X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy for crystal phase identification and molecular bond structures, respectively. The efficiency of the AC-TiO₂ was evaluated as a function of three input variables viz. catalyst load (2-4 g), reaction time (15-45 min) and pH (6-9) by using Box-Behnken design (BBD) adapted from response surface methodology. Using color and turbidity removal as responses, a 17 run experiment matrix was generated by the BBD to investigate the interaction effects of the three aforementioned input factors. From the results, a reduced quadratic model was generated, which showed good predictability of results agreeable to the experimental data. The analysis of variance (ANOVA), signposted the selected models for color and turbidity, was highly significant (p < 0.05) with coefficients of determination (R²) values of 0.972 and 0.988, respectively. The catalyst load was found as the most significant factor with a high antagonistic impact on the process, whereas the interactive effect of reaction time and pH affected the process positively. At optimal conditions of catalyst load (2.6 g), reaction time (45 min), and pH (6); the desirability of 96% was obtained by a numerical optimization approach representing turbidity removal of 93% and color of 96%.

Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon

This study presents a hybridized photocatalyst with adsorbate as a promising nanocomposite for photoremediation of wastewater. Photocatalytic degradation of bromophenol blue (BPB) in aqueous solution under UV-irradiation of wavelength 400 nm was carried out with TiO2 doped with activated carbon (A) and clinoptilolite (Z) via the co-precipitation technique. The physiochemical properties of the nanocomposite (A–TiO2 and Z–TiO2) and TiO2 were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy. Results of the nanocomposite (A–TiO2 and Z–TiO2) efficiency was compared to that with the TiO2, which demonstrated their adsorption and synergistic effect for the removal of chemical oxygen demand (COD) and color from the wastewater. At an optimal load of 4 g, the photocatalytic degradation activity (Z–TiO2 > A–TiO2 > TiO2) was found favorably by the second-order kinetic model. Consequently, the Langmuir adsorption isotherms favored the nanocomposites (Z–TiO2 > A–TiO2), whereas that of the TiO2 fitted very well on the Freundlich isotherm approach. Z–TiO2 evidently exhibited a high photocatalytic efficacy of decomposition over 80% of BPB (COD) at reaction rate constant (k) and coefficient of determination (R2) values of 5.63 × 10−4 min−1 and 0.989, respectively.

Fate of COVID-19 Occurrences in Wastewater Systems: Emerging Detection and Treatment Technologies—A Review

The coronavirus (COVID-19) pandemic is currently posing a significant threat to the world’s public health and social-economic growth. Despite the rigorous international lockdown and quarantine efforts, the rate of COVID-19 infectious cases remains exceptionally high. Notwithstanding, the end route of COVID-19, together with emerging contaminants’ (antibiotics, pharmaceuticals, nanoplastics, pesticide, etc.) occurrence in wastewater treatment plants (WWTPs), poses a great challenge in wastewater settings. Therefore, this paper seeks to review an inter-disciplinary and technological approach as a roadmap for the water and wastewater settings to help fight COVID-19 and future waves of pandemics. This study explored wastewater–based epidemiology (WBE) potential for detecting SARS-CoV-2 and its metabolites in wastewater settings. Furthermore, the prospects of integrating innovative and robust technologies such as magnetic nanotechnology, advanced oxidation process, biosensors, and membrane bioreactors into the WWTPs to augment the risk of COVID-19’s environmental impacts and improve water quality are discussed. In terms of the diagnostics of COVID-19, potential biosensors such as sample–answer chip-, paper- and nanomaterials-based biosensors are highlighted. In conclusion, sewage treatment systems, together with magnetic biosensor diagnostics and WBE, could be a possible way to keep a surveillance on the outbreak of COVID-19 in communities around the globe, thereby identifying hotspots and curbing the diagnostic costs of testing. Photocatalysis prospects are high to inactivate coronavirus, and therefore a focus on safe nanotechnology and bioengineering should be encouraged.