Open software platform for automated analysis of paper-based microfluidic devices

Cellulose acetate microwell plates for high-throughput colorimetric assays

Single use plasticware (SUP) in scientific, diagnostic, and academic laboratories makes a significant contribution to plastic waste generation worldwide. Polystyrene (PS) microwell plates form a part of this waste. These plates are the backbone of high throughput colorimetric measurements in academic, research, and healthcare settings for detection/quantification of wide-ranging analytes including proteins, carbohydrates, nucleic acids, and enzyme activity. Polystyrene (PS) microwell plates serve as a platform for holding samples and reagents, where mixing initiates chemical reaction(s), and the ensuing color changes are quantified using a microplate reader. However, these plates are rarely reused or recycled, contributing to the staggering amounts of plastic waste generated in scientific laboratories. Here, we are reporting the fabrication of cellulose acetate (CA) microwell plates as a greener alternative to non-biodegradable PS plates and we demonstrate their application in colorimetric assays. These easy to fabricate, lighter weight, customizable, and environmentally friendly plates were fabricated in 96- and 384-well formats and made water impermeable through chemical treatment. The plates were tested in three different colorimetric analyses: (i) bicinchoninic acid assay (BCA) for protein quantification; (ii) chymotrypsin (CT) activity assay; and (iii) alkaline phosphatase (AP) activity assay. Color intensities were quantified using a freely available smartphone application, Spotxel® Reader (Sicasys Software GmbH). To benchmark the performance of this platform, the same assays were performed in commercial PS plates too and quantified using a UV/Vis microplate reader. The two systems yielded comparable linear correlation coefficients, LOD and LOQ values, thereby validating the CA plate-cell phone based analytical method. The CA microwell plates, coupled with smart phone optical data capture, provide greener, accessible, and scalable tools for all laboratory settings and are particularly well-suited for resource- and infrastructure-limited environments.

Thrombin-activatable fibrinolysis inhibitor and sex modulate thrombus stability and pulmonary embolism burden in a murine model

BACKGROUND

Thrombin-activatable fibrinolysis inhibitor (TAFI) levels are positively correlated with the risk of thrombosis. The mechanism of how TAFI affects venous thromboembolism (VTE) remains uncertain. In addition, the role of sex on the risk of VTE has also been studied. However, their association also remains unclear.

OBJECTIVES

To investigate how TAFI and/or sex affect venous thrombus stability and consequent pulmonary embolism (PE).

METHODS

Ferric chloride-induced thrombi were formed within the femoral veins of male and female wild-type (WT) or TAFI-knockout (Cpb2-/-) mice. Thrombi were imaged over 2 hours using intravital videomicroscopy to quantify embolization and thrombus size over time. Lungs were examined by immunohistochemistry to quantify (a) emboli and (b) fibrin composition of these emboli.

RESULTS

Embolization events in female mice were higher than in males (7.9-fold in WT and 3.1-fold in Cpb2-/- mice). Although the maximal thrombus sizes were not different across groups, Cpb2-/- mice had thrombi that were, on average, 24% smaller at the end of the 2-hour experiment than WT mice. Loss of TAFI led to a 4.0- and 2.8-fold increase in PE burden in males and females, respectively, while sex had no influence. Pulmonary emboli in Cpb2-/- mice had higher fibrin composition compared with WT mice.

CONCLUSION

Female mice had less stable venous thrombi than male mice, suggesting a higher risk of PE in females with deep vein thrombosis. Mice lacking TAFI had more thrombus degradation and higher PE burden than WT mice. These results confirm the role of TAFI in venous thrombosis.

Low-tech vs. high-tech approaches in μPADs as a result of contrasting needs and capabilities of developed and developing countries focusing on diagnostics and point-of-care testing

Paper-based analysis has captivated scientists' attention in the field of analytical chemistry and related areas for the last two decades. Arguably no other area of modern chemical analysis is so broad and diverse in its approaches spanning from simple 'low-tech' low-cost paper-based analytical devices (PADs) requiring no or simple instrumentation, to sophisticated PADs and microfluidic paper-based analytical devices (μPADs) featuring elements of modern material science and nanomaterials affording high selectivity and sensitivity. Correspondingly diverse is the applicability, covering resource-limited scenarios on the one hand and most advanced approaches on the other. Herein we offer a view reflecting this diversity in the approaches and types of devices. The core idea of this article rests in dividing μPADs according to their type into two groups: A) instrumentation-free μPADs for resource-limited scenarios or developing countries and B) instrumentation-based μPADs as futuristic POC devices for e-diagnostics mainly aimed at developed countries. Each of those two groups is presented and discussed with the view of the main requirements in the given area, the most common targets, sample types and suitable detection approaches either implementing high-tech elements or low-tech low-cost approaches. Finally, a socioeconomic perspective is offered in discussing the fabrication and operational costs of μPADs, and, future perspectives are offered.

Smartphone-integrated paper-based biosensor for sensitive fluorometric ethanol quantification

The development of fluorometric paper-based analytical devices (fPADs) integrated with smartphone for fluorometric quantification of ethanol in an instrument-free and portable setup is described. The NAD+-dependent alcohol dehydrogenase immobilized within chitosan modified paper substate was utilized as a bio-recognition element and enzymatically generated NADH was used as a fluorescent probe. 3D-printed imaging setup which houses a paper chip holder and UV-light emitting device (LED) was developed for rapid, accurate capture of the fluorescent images. The biocompatible chitosan layer covering the paper provides a feasible environment for enzyme immobilization and enhances the fluorescence signal. The developed fPADs exhibited high sensitivity for ethanol detection and has a linear range for ethanol detection from 17 µM to 8.75 mM (R2 =0.99). Additionally, the fPADs were applied to quantify ethanol in four different wine samples including red, white, rose, and sparkling wines successfully. Moreover, the fPADs produce reproducible signals without loss of enzyme activity for at least 14 days and ~80% activity remained till 28 days. Thus, the proposed approach can provide a facile, affordable, portable, and instrument-free tool for the onsite quantification of ethanol in real samples and is applicable for food quality controls.

Paper microzone assay embedded on a 3D printed support for colorimetric quantification of proteins in different biological and food samples

This study describes the development of a paper microzone colorimetric assay embedded on a 3D printed support for quantifying total protein content in different biological matrices and foods. The aim was to develop an accurate and reliable method, ensuring at the same time the possibility of customizability, facility of use, wide applicability, and reduced analysis for both time and costs. The device consists of a 3D printed thermoplastic polyurethane support housing the detection substrate (GF/F glass microfiber). The bromophenol blue (BPB) assay was optimized in this substrate to quantify total protein content. The analytical performance, assessed through image analysis, indicated that the hue factor of the HSV colour space represents the best analytical signal (r² > 0.98%). The optimized assay ensures a sufficiently low limit of detection (0.05 mg mL^-1), and an accuracy between 92% and 95%. The bioanalytical feasibility was demonstrated through total protein concentration measurement in different biological matrices (bee venom and mouse brain tissue), and foods (soya milk, cow's milk and protein supplements). The obtained values showed a strong agreement with those derived from a standard spectrophotometric analysis. Overall, the paper microzone BPB assay may represent an important contribution to protein quantification technology and could significantly impact many areas, such as quality control analysis and pre-clinical laboratory analysis.

Hollow microneedle microfluidic paper-based chip for biomolecules rapid sampling and detection in interstitial fluid

The interstitial fluid (ISF) contains rich bioinformation for disease diagnosis and healthcare monitoring. However, the efficient sampling and detection of the biomolecules in ISF is still challenging. Herein, we develop a facile but versatile ISF analysis platform by combining controllable hollow microneedles (HMNs) and elaborate microfluidic paper-based analytical devices (μPADs). The HMNs and μPADs was fixed in a bottom PDMS layer. A top PDMS layer containing a cylindrical cavity to produce negative pressure for sampling was packaged on the bottom PDMS layer. The HMNs enable efficient and swift sampling of sufficient ISF to the μPADs through one-touch finger operation without extra manipulations. The μPADs realized to simultaneously detect glucose and lactic acid in the detection area to produce chromogenic agents and analyzed by the self-programed RGB application (APP) in smartphones. The HMN microfluidic paper-based chip provides a point-of-care platform for accurate detection of biomolecules in ISF, holding great promise in the development of wearable device.

Direct capture of neutralized RBD enables rapid point-of-care assessment of SARS-CoV-2 neutralizing antibody titer

Neutralizing antibody (NAb) titer is a key biomarker of protection against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, but point-of-care methods for assessing NAb titer are not widely available. Here, we present a lateral flow assay that captures SARS-CoV-2 receptor-binding domain (RBD) that has been neutralized from binding angiotensin-converting enzyme 2 (ACE2). Quantification of neutralized RBD in this assay correlates with NAb titer from vaccinated and convalescent patients. This methodology demonstrated superior performance in assessing NAb titer compared with either measurement of total anti-spike immunoglobulin G titer or quantification of the absolute reduction in binding between ACE2 and RBD. Our testing platform has the potential for mass deployment to aid in determining at population scale the degree of protective immunity individuals may have following SARS-CoV-2 vaccination or infection and can enable simple at-home assessment of NAb titer.

Strategies for the detection of target analytes using microfluidic paper-based analytical devices

Microfluidic paper-based analytical devices (μPADs) have developed rapidly in recent years, because of their advantages, such as small sample volume, rapid detection rates, low cost, and portability. Due to these characteristics, they can be used for in vitro diagnostics in the laboratory, or in the field, for a variety of applications, including food evaluation, disease screening, environmental monitoring, and drug testing. This review will present various detection methods employed by μPADs and their respective applications for the detection of target analytes. These include colorimetry, electrochemistry, chemiluminescence (CL), electrochemiluminescence (ECL), and fluorescence-based methodologies. At the same time, the choice of labeling material and the design of microfluidic channels are also important for detection results. The construction of novel nanocomponents and different smart structures of paper-based devices have improved the performance of μPADs and we will also highlight some of these in this manuscript. Additionally, some key challenges and future prospects for the use of μPADs are briefly discussed.