Identification of ultrasound imaging markers to quantify long bone regeneration in a segmental tibial defect sheep model in vivo

Bioactive coatings on 3D printed scaffolds for bone regeneration: Use of Laponite® to deliver BMP-2 in an ovine femoral condyle defect model

Biomaterial-based approaches for bone regeneration seek to explore alternative strategies to repair non-healing fractures and critical-sized bone defects. Fracture non-union occurs due to a number of factors resulting in the formation of bone defects. Rigorous evaluation of the biomaterials in relevant models and assessment of their potential to translate towards clinical use is vital. Large animal experimentation can be used to model fracture non-union while scaling-up materials for clinical use. Growth factors modulate cell phenotype, behaviour and initiate signalling pathways leading to changes in matrix deposition and tissue formation. Bone morphogenetic protein-2 (BMP-2) is a potent osteogenic growth factor, with a rapid clearance time in vivo necessitating clinical use at a high dose, with potential deleterious side-effects. The current studies have examined the potential for Laponite® nanoclay coated poly(caprolactone) trimethacrylate (PCL-TMA900) scaffolds to bind BMP-2 for enhanced osteoinduction in a large animal critical-sized bone defect. An ovine femoral condyle defect model confirmed PCL-TMA900 scaffolds coated with Laponite®/BMP-2 produced significant bone formation compared to the uncoated PCL-TMA 900 scaffold in vivo, assessed by micro-computed tomography (μCT) and histology. This indicated the ability of Laponite® to deliver the bioactive BMP-2 on the PCL-TMA900 scaffold. Bone formed around the Laponite®/BMP-2 coated PCL-TMA900 scaffold, with no erroneous bone formation observed away from the scaffold material confirming localisation of BMP-2 delivery. The current studies demonstrate the ability of a nanoclay to localise and deliver bioactive BMP-2 within a tailored octet-truss scaffold for efficacious bone defect repair in a large animal model with significant implications for translation to the clinic.

Trends in bioactivity: inducing and detecting mineralization of regenerative polymeric scaffolds

Due to limitations of biological and alloplastic grafts, regenerative engineering has emerged as a promising alternative to treat bone defects. Bioactive polymeric scaffolds are an integral part of such an approach. Bioactivity importantly induces hydroxyapatite mineralization that promotes osteoinductivity and osseointegration with surrounding bone tissue. Strategies to confer bioactivity to polymeric scaffolds utilize bioceramic fillers, coatings and surface treatments, and additives. These approaches can also favorably impact mechanical and degradation properties. A variety of fabrication methods are utilized to prepare scaffolds with requisite morphological features. The bioactivity of scaffolds may be evaluated with a broad set of techniques, including in vitro (acellular and cellular) and in vivo methods. Herein, we highlight contemporary and emerging approaches to prepare and assess scaffold bioactivity, as well as existing challenges.

Assessment of spinal cord injury using ultrasound elastography in a rabbit model in vivo

The effect of the mechanical micro-environment on spinal cord injury (SCI) and treatment effectiveness remains unclear. Currently, there are limited imaging methods that can directly assess the localized mechanical behavior of spinal cords in vivo. In this study, we apply new ultrasound elastography (USE) techniques to assess SCI in vivo at the site of the injury and at the time of one week post injury, in a rabbit animal model. Eleven rabbits underwent laminectomy procedures. Among them, spinal cords of five rabbits were injured during the procedure. The other six rabbits were used as control. Two neurological statuses were achieved: non-paralysis and paralysis. Ultrasound data were collected one week post-surgery and processed to compute strain ratios. Histologic analysis, mechanical testing, magnetic resonance imaging (MRI), computerized tomography and MRI diffusion tensor imaging (DTI) were performed to validate USE results. Strain ratios computed via USE were found to be significantly different in paralyzed versus non-paralyzed rabbits. The myelomalacia histologic score and spinal cord Young's modulus evaluated in selected animals were in good qualitative agreement with USE assessment. It is feasible to use USE to assess changes in the spinal cord of the presented animal model. In the future, with more experimental data available, USE may provide new quantitative tools for improving SCI diagnosis and prognosis.

Icariin Has a Synergistic Effect on the Osteoinductivity of Bone Morphogenetic Protein 2 at Ectopic Sites

OBJECTIVE

Establishing biocompatible, biodegradable, osteoconductive, and osteoinductive bone materials remains a challenging subject in the research of bone healing and bone regeneration. Previously, we demonstrated the osteogenic and osteoconductive effects of biomimetic calcium phosphate (BioCaP) incorporating with Icariin and/or bone morphogenetic protein 2 (BMP-2) at orthotopic sites.

METHODS

By implanting the BioCaP granules incorporated Icariin and/or BMP-2 into the dorsal subcutaneous pockets of adult male Sprague-Dawley (S-D) rats (6-7 weeks old), we investigated the osteoinductive efficacy of the samples. Micro-computed tomography(micro-CT) observations and histological slices were used to verify the osteoinduction of this system on the 2^nd and 5^th week. Statistical significances was evaluated using Turkey's post hoc test of one-way analysis of variance.

RESULTS

The osteoinduction of the BioCaP incorporated with BMP-2 or both agents was confirmed as expected. BioCaP with Icariin alone could not generate bone formation at an ectopic sites. Nevertheless, co-administration of Icariin increased bone mineral density (BMD; p < 0.01) (628mg HA/cm³ vs 570mg HA/cm³ ) and completely changed the distribution of newly formed bone when compared with the granules with BMP-2 alone, even though there was no significant difference in the volume of newly formed bone. In contrast, the BioCaP with both agents (37.86%) had significantly fewer remaining materials than the other groups by the end of the fifth week (53.22%, 53.62% and 48.22%) (p < 0.01).

CONCLUSION

The co-administration of Icariin and BMP-2 increased BMD changed the distribution of newly formed bone, and reduced the amount of remaining materials. Therefore, Icariin can stimulate BMP-2 when incorporated into BioCaP granules at ectopic sites, which makes it useful for bone tissue engineering.

Clinical Assessments of Fracture Healing and Basic Science Correlates: Is There Room for Convergence?

PURPOSE OF REVIEW

The purpose of this review is to summarize the clinical and basic science methods used to assess fracture healing and propose a framework to improve the translational possibilities.

RECENT FINDINGS

Mainstays of fracture healing assessment include clinical examination, various imaging modalities, and assessment of function. Pre-clinical studies have yielded insight into biomechanical progression as well as the genetic, molecular, and cellular processes of fracture healing. Efforts are emerging to identify early markers to predict impaired healing and possibly early intervention to alter these processes. Despite of the differences in clinical and preclinical research, opportunities exist to unify and improve the translational efforts between these arenas to develop and optimize our ability to assess and predict fracture healing, thereby improving the clinical care of these patients.

The progress in quantitative evaluation of callus during distraction osteogenesis

The manual monitoring of callus with digital radiography (X-ray) is the primary bone healing evaluation, assessing the number of bridged callus formations. However, this method is subjective and nonquantitative. Recently, several quantitative monitoring methods, which could assess the recovery of the structure and biomechanical properties of the callus at different stages and the process of bone healing, have been extensively investigated. These methods could reflect the bone mineral content (BMC), bone mineral density (BMD), stiffness, callus and bone metabolism at the site of bone lengthening. In this review, we comprehensively summarized the latest techniques for evaluating bone healing during distraction osteogenesis (DO): 1) digital radiography; 2) dual-energy X-ray scanning; 3) ultrasound; 4) quantitative computed tomography; 5) biomechanical evaluation; and 6) biochemical markers. This evidence will provide novel and significant information for evaluating bone healing during DO in the future.

A CNN-based method to reconstruct 3-D spine surfaces from US images in vivo

Three-dimensional (3-D) reconstruction of the spine surface is of strong clinical relevance for the diagnosis and prognosis of spine disorders and intra-operative image guidance. In this paper, we report a new technique to reconstruct lumbar spine surfaces in 3-D from non-invasive ultrasound (US) images acquired in free-hand mode. US images randomly sampled from in vivo scans of 9 rabbits were used to train a U-net convolutional neural network (CNN). More specifically, a late fusion (LF)-based U-net trained jointly on B-mode and shadow-enhanced B-mode images was generated by fusing two individual U-nets and expanding the set of trainable parameters to around twice the capacity of a basic U-net. This U-net was then applied to predict spine surface labels in in vivo images obtained from another rabbit, which were then used for 3-D spine surface reconstruction. The underlying pose of the transducer during the scan was estimated by registering stacks of US images to a geometrical model derived from corresponding CT data and used to align detected surface points. Final performance of the reconstruction method was assessed by computing the mean absolute error (MAE) between pairs of spine surface points detected from US and CT and by counting the total number of surface points detected from US. Comparison was made between the LF-based U-net and a previously developed phase symmetry (PS)-based method. Using the LF-based U-net, the averaged number of US surface points across the lumbar region increased by 21.61% and MAE reduced by 26.28% relative to the PS-based method. The overall MAE (in mm) was 0.24±0.29. Based on these results, we conclude that: 1) the proposed U-net can detect the spine posterior arch with low MAE and large number of US surface points and 2) the newly proposed reconstruction framework may complement and, under certain circumstances, be used without the aid of an external tracking system in intra-operative spine applications.

Men who stare at bone: multimodal monitoring of bone healing

Knowledge of the physiological and pathological processes, taking place in bone during fracture healing or defect regeneration, is essential in order to develop strategies to enhance bone healing under normal and critical conditions. Preclinical testing allows a wide range of imaging modalities that may be applied both simultaneously and longitudinally, which will in turn lower the number of animals needed to allow a comprehensive assessment of the healing process. This work provides an up-to-date review on morphological, functional, optical, biochemical, and biophysical imaging techniques including their advantages, disadvantages and potential for combining them in a multimodal and multiscale manner. The focus lies on preclinical testing of biomaterials modified with artificial extracellular matrices in various animal models to enhance bone remodeling and regeneration.

In Vivo Imaging of Biodegradable Implants and Related Tissue Biomarkers

Non-invasive longitudinal imaging of osseointegration of bone implants is essential to ensure a comprehensive, physical and biochemical understanding of the processes related to a successful implant integration and its long-term clinical outcome. This study critically reviews the present imaging techniques that may play a role to assess the initial stability, bone quality and quantity, associated tissue remodelling dependent on implanted material, implantation site (surrounding tissues and placement depth), and biomarkers that may be targeted. An updated list of biodegradable implant materials that have been reported in the literature, from metal, polymer and ceramic categories, is provided with reference to the use of specific imaging modalities (computed tomography, positron emission tomography, ultrasound, photoacoustic and magnetic resonance imaging) suitable for longitudinal and non-invasive imaging in humans. The advantages and disadvantages of the single imaging modality are discussed with a special focus on preclinical imaging for biodegradable implant research. Indeed, the investigation of a new implant commonly requires histological examination, which is invasive and does not allow longitudinal studies, thus requiring a large number of animals for preclinical testing. For this reason, an update of the multimodal and multi-parametric imaging capabilities will be here presented with a specific focus on modern biomaterial research.

Ultrasound Frequency-Based Monitoring for Bone Healing

Correct assessment of the bone healing process is required for the management of limb immobilization during the treatment of bone injuries, including fractures and defects. Although the monitoring of bone healing using ultrasound poses several advantages regarding cost and ionizing radiation exposure compared with other dominant imaging methods, such as radiography and computed tomography (CT), traditional ultrasound B-mode imaging lacks reliability and objectivity. However, the body structures can be quantitatively observed by ultrasound frequency-based methods, and therefore, the disadvantages of B-mode imaging can be overcome. In this study, we created a femoral bone hole model of a rat and observed the bone healing process using the quantitative ultrasound method and micro-CT, which provides a reliable assessment of the tissue microstructure of the bone. This study analyzed the correlation between these two assessments. The results revealed that the quantitative ultrasound measurements correlated with the CT measurements for rat bone healing. This ultrasound frequency-based method could have the potential to serve as a novel modality for quantitative monitoring of bone healing with the advantages of being less invasive and easily accessible. Impact statement Bone healing monitoring with ultrasound is advantageous as it is less invasive and easily accessible; however, the traditional B-mode method lacks reliability and objectivity. This study demonstrated that the proposed ultrasound frequency-based monitoring method can quantitatively observe bone healing and strongly correlates with the computed tomography measurements for rat bone healing. This method has the potential to become a reliable modality for monitoring bone healing.