Multifunctional light beam control device by stimuli-responsive liquid crystal micro-grating structures

Refractive Fresnel liquid crystal lenses driven by two voltages

We propose and demonstrate a high-performance refractive Fresnel liquid crystal (LC) lens with a simple electrode design. The interconnected circular electrodes enable the creation of a parabolic voltage distribution within each Fresnel zone using only two driving voltages. By controlling these voltages within the linear response region of LC material, the desired parabolic phase profile can be achieved. We provide a detailed discussion on the electrode structure design methodology and operating principles of the lens. In our experiments, we constructed a four-zone Fresnel LC lens with a total aperture of 8 mm. The results show that the optical power of the lens can be continuously adjusted from -1.30 D to +1.33 D. Throughout the process of electrically tuning the optical power, the phase distribution within each Fresnel zone maintains a parabolic profile. These results demonstrate the high-performance of the proposed Fresnel LC lens.

Design and Simulation of InGaN-Based Red Vertical-Cavity Surface-Emitting Lasers

We propose a highly polarized vertical-cavity surface-emitting laser (VCSEL) consisting of staggered InGaN multiple quantum wells (MQWs), with the resonance cavity and polarization enabled by a bottom nanoporous (NP) n-GaN distributed Bragg reflectors (DBRs), and top TiO2 high-index contrast gratings (HCGs). Optoelectronic simulations of the 612 nm VCSEL were systematically and numerically investigated. First, we investigated the influences of the NP DBR and HCG geometries on the optical reflectivity. Our results indicate that when there are more than 17 pairs of NP GaN DBRs with 60% air voids, the reflectance can be higher than 99.7%. Furthermore, the zeroth-order reflectivity decreases rapidly when the HCG's period exceeds 518 nm. The optimal ratios of width-to-period (52.86 ± 1.5%) and height-to-period (35.35 ± 0.14%) were identified. The staggered MQW design also resulted in a relatively small blue shift of 5.44 nm in the emission wavelength under a high driving current. Lastly, we investigated the cavity mode wavelength and optical threshold gain of the VCSEL with a finite size of HCG. A large threshold gain difference of approximately 67.4-74% between the 0th and 1st order transverse modes can be obtained. The simulation results in this work provide a guideline for designing red VCSELs with high brightness and efficiency.

Control of Coherent Light through Microperiodic Director Modulation in Nematic Films under Low-Voltage DC Electric Field

This work addresses the achievement of efficient control of laser light transmission through stationary microperiodic parallel stripe textures formed in films of nematic liquid crystals (NLCs) in planar-oriented cells upon a direct-current (DC) electric field. By varying the field intensity and, thereby, the field-induced periodic modulation of the nematic director and hence the complex transmittance function corresponding to the longitudinal domain texture induced in NLC films with initial planar alignment, the intensity of a linearly polarized laser beam passed through the films can be well controlled. In 25 µm-thick films of room-temperature NLCs pentylcyanobiphenyl (5CB), this results in a low-voltage (~4 V) sharp and deep V-shaped behavior of their electro-optically controlled transmittance. Such a reversible electro-optical effect is interesting for active control of laser beam intensity and other applications. The relevant physical mechanism is analyzed and explained.

Liquid crystal lens with a shiftable optical axis

A liquid crystal (LC) lens with a laterally shiftable optical axis is proposed and demonstrated. The optical axis of the lens can be driven to shift within the lens aperture without compromising its optical properties. The lens is constructed by two glass substrates with identical interdigitated comb-type finger electrodes on the inner surfaces, and they are oriented at 90° with respect to each other. The distribution of voltage difference between two substrates is determined by eight driving voltages, and is controlled within the linear response region of LC materials, thereby generating a parabolic phase profile. In experiments, an LC lens with an LC layer of 50 µm and an aperture of 2 mm × 2 mm is prepared. The interference fringes and focused spots are recorded and analyzed. As a result, the optical axis can be driven to shift precisely in the lens aperture, and the lens maintains its focusing ability. The experimental results are consistent with the theoretical analysis, and good performance of the LC lens is demonstrated.

Adaptive lens for foveal vision, imaging, and projection over large clear apertures

We report an electrically tunable liquid crystal device that enables the generation of lenses the diameters of which may be dynamically changed from sub-millimeter to multiple millimeter sizes. These lenses can be created in different regions of interest over very large (above 50 mm) optical clear apertures. The approach is based on the activation of periodically spaced contacts on a single serpentine-shaped electrode with phase-shifted electrical signals. It enables a highly reconfigurable operation of locally created lenses with variable position, diameter, optical power (OP) and aberrations. The preliminary demonstration of the capabilities of the proposed device is presented here by creating a local lens, moving its center over an area of 25 mm x 25 mm, gradually changing its diameter from 1.3 mm to 4.55 mm as well as by tuning its OP value from zero up to, respectively, ≈ 40 and ≈3.5 diopters. Typical driving signals are at the order of 3.5 V. We think that such lenses can be used for ophthalmic or augmented reality applications as well as in microscopy, adaptive panoramic cameras with large distorted field of view, dynamic projection, etc.

Recent Development of Tunable Optical Devices Based on Liquid

Liquid opens up a new stage of device tunability and gradually replaced solid-state devices and mechanical tuning. It optimizes the control method and improves the dynamic range of many optical devices, exhibiting several attractive features, such as rapid prototyping, miniaturization, easy integration and low power consumption. The advantage makes optical devices widely used in imaging, optical control, telecommunications, autopilot and lab-on-a-chip. Here, we review the tunable liquid devices, including isotropic liquid and anisotropic liquid crystal devices. Due to the unique characteristics of the two types of liquids, the tuning principles and tuning methods are distinguished and demonstrated in detail firstly and then some recent progress in this field, covering the adaptive lens, beam controller, beam filter, bending waveguide, iris, resonator and display devices. Finally, the limitations and future perspectives of the current liquid devices are discussed.

A high birefringence liquid crystal for lenses with large aperture

This work presents the application of an experimental nematic liquid crystal (LC) mixture (1929) in a large aperture lens. The LC material is composed of terphenyl and biphenyl derivatives compounds with an isothiocyanate terminal group and fluorinated lateral substituents. The substitution with a strongly polar isothiocyanate group and an aromatic rigid core provides \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pi$$\end{document}π-electron coupling, providing high birefringence (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta n = 0.3375$$\end{document}Δn=0.3375 at 636 nm and 23 °C) and low viscosity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\eta$$\end{document}η = 17.03 mPa s). In addition, it also shows high values of birefringence at near infrared (0.318 at 1550 nm). The synthesis process is simple when comparing materials with high melting temperatures. The excellent properties of this LC mixture are demonstrated in a large aperture LC-tunable lens based on a transmission electrode structure. Thanks to the particular characteristics of this mixture, the optical power is high. The high birefringence makes this LC of specific interest for lenses and optical phase modulators and devices, both in the visible and infrared regions.

Metasurface Micro/Nano-Optical Sensors: Principles and Applications

Metasurfaces are 2D artificial materials consisting of arrays of metamolecules, which are exquisitely designed to manipulate light in terms of amplitude, phase, and polarization state with spatial resolutions at the subwavelength scale. Traditional micro/nano-optical sensors (MNOSs) pursue high sensitivity through strongly localized optical fields based on diffractive and refractive optics, microcavities, and interferometers. Although detections of ultra-low concentrations of analytes have already been demonstrated, the label-free sensing and recognition of complex and unknown samples remain challenging, requiring multiple readouts from sensors, e.g., refractive index, absorption/emission spectrum, chirality, etc. Additionally, the reliability of detecting large, inhomogeneous biosamples may be compromised by the limited near-field sensing area from the localization of light. Here, we review recent advances in metasurface-based MNOSs and compare them with counterparts using micro-optics from aspects of physics, working principles, and applications. By virtue of underlying the physics and design flexibilities of metasurfaces, MNOSs have now been endowed with superb performances and advanced functionalities, leading toward highly integrated smart sensing platforms.

Liquid crystal lens array with positive and negative focal lengths

A positive-negative tunable liquid crystal lens array is proposed by electrode design. The electrode structure consists of two main units, one of them is used to generate parabolic voltage profile and the other one distributes the voltage homogeneously across the lens aperture. The proposal features the advantages of high-quality performance, simple fabrication process (a single lithographic step), compact design, low voltages and simple driving method. In addition, the lens array can be driven as a square lens array or a rotatable cylindrical lens array. The voltage difference between the electrodes on the inner face of two substrates is controlled within the range that the phase of liquid crystal layer responds linearly to voltage difference, then the phase of the lens array maintains parabolic profile in the whole focus range. In experiments, a lens array with 30 µm liquid crystal layer is fabricated using the designed electrode. The size of the array area is 11 × 11 mm, and the side length of an individual square lens is 1.0 mm. The results show that the phase profile matches with the parabolic profile during focus tuning, and good focusing effect of the positive lens is observed. As a result, a liquid crystal lens array with high-quality performance is experimentally demonstrated, and the experimental results are consistent with the theoretical analyses.

High resolution 2D beam steerer made from cascaded 1D liquid crystal phase gratings

Optical beam steering (BS) has multiple applications in fields like target seeking and tracking, optical tweezers, billboard displays and many others. In this work, a two-dimensional beam deflector based on blaze gratings is presented. Phase-only 1D blaze gratings have been prepared using maskless Direct Laser Writing (DLW) resulting in high-resolution structures in indium-tin oxide (ITO) coated glass wafers. The device is composed of two identical 1D liquid crystal (LC) cells cascaded orthogonally back-to-back, with a resultant active area of 1.1 × 1.1 mm². The 1D cells have been prepared with 144 pixels each with a 7.5 µm pitch. The total 288 pixels are driven by a custom made 12-bit Pulse Width Modulation (PWM) electronic driver, allowing for an arbitrarily high resolution. The system performance is documented, and the efficiency of the system has been tested. A maximum diagonal steering angle of ± 3.42° was achieved.

Electrically Tuneable Optical Diffraction Gratings Based on a Polymer Scaffold Filled with a Nematic Liquid Crystal

We present an experimental and theoretical investigation of the optical diffractive properties of electrically tuneable optical transmission gratings assembled as stacks of periodic slices from a conventional nematic liquid crystal (E7) and a standard photoresist polymer (SU-8). The external electric field causes a twist-type reorientation of the LC molecules toward a perpendicular direction with respect to initial orientation. The associated field-induced modification of the director field is determined numerically and analytically by minimization of the Landau–de Gennes free energy. The optical diffraction properties of the associated periodically modulated structure are calculated numerically on the basis of rigorous coupled-wave analysis (RCWA). A comparison of experimental and theoretical results suggests that polymer slices provoke planar surface anchoring of the LC molecules with the inhomogeneous surface anchoring energy varying in the range 5–20 μJ/m². The investigated structures provide a versatile approach to fabricating LC-polymer-based electrically tuneable diffractive optical elements (DOEs).

Design of Tunable Holographic Liquid Crystalline Diffraction Gratings

Tunable diffraction gratings and phase filters are important functional devices in optical communication and sensing systems. Polarization gratings, in particular, capable of redirecting an incident light beam completely into the first diffraction orders may be successfully fabricated in liquid crystalline cells assembled from substrates coated with uniform transparent electrodes and orienting layers that force a specific molecular distribution. In this work, the diffraction properties of liquid crystal (LC) cells characterized by a continually rotating cycloidal director pattern at the cell substrates and in the bulk, are studied theoretically by solving a relevant set of the Euler-Lagrange equations. The electric tunability of the gratings is analyzed by estimating the changes in liquid crystalline molecular distribution and thus in effective birefringence, as a function of external voltage. To the best of our knowledge, such detailed numerical calculations have not been presented so far for liquid crystal polarization gratings showing a cycloidal director pattern. Our theoretical predictions may be easily achieved in experimental conditions when exploiting, for example, photo-orienting material, to induce a permanent LC alignment with high spatial resolution. The proposed design may be for example, used as a tunable passband filter with adjustable bandwidths, thus allowing for potential applications in optical spectroscopy, optical communication networks, remote sensing and beyond.

Engineering Aspheric Liquid Crystal Lenses by Using the Transmission Electrode Technique

The transmission electrode technique has been recently proposed as a versatile method to obtain various types of liquid-crystal (LC) lenses. In this work, an equivalent electric circuit and new analytical expressions based on this technique are developed. In addition, novel electrode shapes are proposed in order to generate different phase profiles. The analytical expressions depend on manufacturing parameters that have been optimized by using the least squares method. Thanks to the proposed design equations and the associated optimization, the feasibility of engineering any kind of aspheric LC lenses is demonstrated, which is key to obtain aberration-free lenses. The results are compared to numerical simulations validating the proposed equations. This novel technique, in combination with the proposed design equations, opens a new path for the design and fabrication of LC lenses and even other types of adaptive-focus lenses based on voltage control.