Low noise all-fiber amplification of a coherent supercontinuum at 2 µm and its limits imposed by polarization noise

All-fiber GHz few-cycle pulse generation at 2 µm

We demonstrate an all-fiber GHz mode-locked laser system with few-cycle duration operating at 2 µm. Based on a dispersion-managed mode-locked oscillator, a multi-stage fiber amplifier, and a nonlinear pulse compressor, the laser system can deliver watt-level few-cycle pulses at a fundamental repetition rate of 1.041 GHz. This 2-µm pulsed laser offers outstanding performance metrics, including a pulse duration of 33 fs (corresponding to ∼5 optical cycles) and an average power of 4.17 W. Moreover, the all-fiber laser system exhibits excellent power stability, and the integrated relative intensity noise (RIN) is only 0.052% (10 Hz-1 MHz). It is anticipated that this new, to the best of our knowledge, laser source is promising for frontier applications, including coherent supercontinuum generation, nonlinear frequency conversion, and laser-material interaction.

Benefits of cascaded nonlinear dynamics in hybrid fibers for low-noise supercontinuum generation

The recent development of fiber supercontinuum (SC) sources with ultra-low noise levels has been instrumental in advancing the state-of-the-art in a wide range of research topics. However, simultaneously satisfying the application demands of maximizing spectral bandwidth and minimizing noise is a major challenge that so far has been addressed with compromise, found by fine-tuning the characteristics of a single nonlinear fiber transforming the injected laser pulses into a broadband SC. In this work, we investigate a hybrid approach that splits the nonlinear dynamics into two discrete fibers optimized for nonlinear temporal compression and spectral broadening, respectively. This introduces new design degrees of freedom, making it possible to select the best fiber for each stage of the SC generation process. With experiments and simulations we study the benefits of this hybrid approach for three common and commercially available highly nonlinear fiber (HNLF) designs, focusing on flatness, bandwidth and relative intensity noise of the generated SC. In our results, hybrid all-normal dispersion (ANDi) HNLF stand out as they combine the broad spectral bandwidths associated with soliton dynamics with extremely low noise and smooth spectra known from normal dispersion nonlinearities. Hybrid ANDi HNLF are a simple and low-cost route for implementing ultra-low noise SC sources and scaling their repetition rate for various applications such as biophotonic imaging, coherent optical communications, or ultrafast photonics.

Noise in supercontinuum generated using PM and non-PM tellurite glass all-normal dispersion fibers

Intensity fluctuations in supercontinuum generation are studied in polarization-maintaining (PM) and non-PM all-normal dispersion tellurite photonic crystal fibers. Dispersive Fourier transformation is used to resolve the shot-to-shot spectra generated using 225-fs pump pulses at 1.55 μm, with experimental results well reproduced by vector and scalar numerical simulations. By comparing the relative intensity noise for the PM and non-PM cases, supported by simulations, we demonstrate the advantage of the polarization-maintaining property of the PM fibers in preserving low-noise dynamics. We associate the low-noise in the PM case with the suppression of polarization modulation instability.

Pulse-to-pulse relative intensity noise measurements for ultrafast lasers

Relative intensity noise (RIN) can be used to characterize pulse-to-pulse energy variations of ultrafast lasers, and is a very important performance parameter when considering the suitability of a laser for an application. However, owing to a wide range of measurement and analysis techniques, comparison of RIN values is non-trivial. Here, we clearly layout a definition of RIN as a percentage value for ultrafast laser systems. Furthermore, we analytically describe how the RIN can be measured in the time and frequency domains, and reveal the conditions under which these two widely employed approaches are equivalent. Finally, we experimentally measure the RIN of an ultrafast supercontinuum laser to be 6.57% in the time domain and 6.98% in the frequency domain at 850 nm, and 17.06% in the time domain and 17.08% in the frequency domain at 1000 nm, thus demonstrating the expected strong agreement when the measurements and signal processing are performed appropriately.

Low pump power coherent supercontinuum generation in heavy metal oxide solid-core photonic crystal fibers infiltrated with carbon tetrachloride covering 930-2500 nm

All-normal dispersion supercontinuum (ANDi SC) generation in a lead-bismuth-gallate glass solid-core photonic crystal fiber (PCF) with cladding air-holes infiltrated with carbon tetrachloride (CCl₄) is experimentally investigated and numerically verified. The liquid infiltration results in additional degrees of freedom that are complimentary to conventional dispersion engineering techniques and that allow the design of soft-glass ANDi fibers with an exceptionally flat near-zero dispersion profile. The unique combination of high nonlinearity and low normal dispersion enables the generation of a coherent, low-noise SC covering 0.93-2.5 µm requiring only 12.5 kW of pump peak power delivered by a standard ultrafast erbium-fiber laser with 100 MHz pulse repetition rate (PRR). This is a much lower peak power level than has been previously required for the generation of ANDi SC with bandwidths exceeding one octave in silica- or soft-glass fibers. Our results show that liquid-composite fibers are a promising pathway for scaling the PRR of ANDi SC sources by making the concept accessible to pump lasers with hundreds of megahertz of gigahertz PRR that have limited peak power per pulse but are often required in applications such as high-speed nonlinear imaging, optical communications, or frequency metrology. Furthermore, due to the overlap of the SC with the major gain bands of many rare-earth fiber amplifiers, our source could serve as a coherent seed for low-noise ultrafast lasers operating in the short-wave infrared spectral region.

All-normal dispersion supercontinuum vs frequency-shifted solitons pumped at 1560 nm as seed sources for thulium-doped fiber amplifiers

We present a direct comparison between two types of femtosecond 2 µm sources used for seeding of an ultrafast thulium-doped fiber amplifier based on all-normal dispersion supercontinuum and soliton self-frequency shift. Both nonlinear effects were generated in microstructured silica fibers, pumped with low-power femtosecond pulses at 1.56 µm originating from an erbium-doped fiber laser. We performed a full characterization of both nonlinear processes, including their shot-to-shot stability, phase coherence, and relative intensity noise. The results revealed that the solitons show comparable performance to supercontinuum in terms of relative intensity noise and shot-to-shot stability, despite the anomalous dispersion regime. Both sources can be successfully used as seeds for Tm-doped fiber amplifiers as an alternative to Tm-doped oscillators. The results show that the sign of chromatic dispersion of the fiber is not crucial for obtaining a stable, high-quality, and low-noise spectral conversion process when pumped with sub-50 fs laser pulses.

Ultra-flat, low-noise, and linearly polarized fiber supercontinuum source covering 670-1390 nm

We report an octave-spanning coherent supercontinuum (SC) fiber laser with excellent noise and polarization properties. This was achieved by pumping a highly birefringent all-normal dispersion photonic crystal fiber with a compact high-power ytterbium femtosecond laser at 1049 nm. This system generates an ultra-flat SC spectrum from 670 to 1390 nm with a power spectral density higher than 0.4 mW/nm and a polarization extinction ratio of 17 dB across the entire bandwidth. An average pulse-to-pulse relative intensity noise down to 0.54% from 700 to 1100 nm was measured and found to be in good agreement with numerical simulations. This highly stable broadband source could find strong potential applications in biomedical imaging and spectroscopy where an improved signal-to-noise ratio is essential.