Distribution, characteristics of extracellular polymeric substances of Phanerochaete chrysosporium under lead ion stress and the influence on Pb removal

Aerobic granular sludge for complex heavy metal-containing wastewater treatment: characterization, performance, and mechanisms analysis

Complex heavy metal (HM)-containing wastewater discharges pose substantial risks to global water ecosystems and human health. Aerobic granular sludge (AGS) has attracted increased attention as an efficient and low-cost adsorbent in HM-containing wastewater treatment. Therefore, this study systematically evaluates the effect of Cu(II), Ni(II), and Cr(III) addition on the characteristics, performance and mechanism of AGS in complex HM-containing wastewater treatment process by means of fourier transform infrared spectroscopy, inductively coupled plasma spectrocopcy, confocal laser scanning microscopy, extracellular polymeric substances (EPS) fractions detection and scanning electron microscope-energy dispersive X-ray. The results showed that AGS efficiently eliminated Cu(II), Ni(II), and Cr(III) by the orchestrated mechanisms of ion exchange, three-layer EPS adsorption [soluble microbial products EPS (SMP-EPS), loosely bound EPS (LB-EPS), tightly bound EPS (TB-EPS)], and inner-sphere adsorption; notably, almost 100% of Ni(II) was removed. Three-layer EPS adsorption was the dominant mechanism through which the HM were removed, followed by ion exchange and inner-sphere adsorption. SMP-EPS and TB-EPS were identified as the key EPS fractions for adsorbing Cr(III) and Cu(II), respectively, while Ni(II) was adsorbed evenly on SMP-EPS, TB-EPS, and LB-EPS. Moreover, the rates at which the complex HM penetrated into the granule interior and their affinity for EPS followed the order Cu(II) > Ni(II) > Cr(III). Ultimately, addition of complex HM stimulated microorganisms to excrete massive phosphodiesterases (PDEs), leading to a pronounced decrease in cyclic diguanylate (c-di-GMP) levels, which subsequently suppressed EPS secretion due to the direct linkage between c-di-GMP and EPS. This study unveils the adaptability and removal mechanism of AGS in the treatment of complex HM-containing wastewater, which is expected to provide novel insights for addressing the challenges posed by intricate real wastewater scenarios.

Kynurenic acid mediates bacteria-algae consortium in resisting environmental cadmium toxicity

Cadmium (Cd²⁺) is a toxic heavy metal in the environment, posing severe damage to animal health and drinking water safety. The bacteria-algae consortium remediates environmental Cd²⁺ pollution by secreting chelating reagents, but the molecular mechanisms remain elusive. Here, we showed that Cellulosimicrobium sp. SH8 isolated from a Cd²⁺-polluted lake could interact with Synechocystis sp. PCC6803, a model species of cyanobacteria, in strengthening Cd²⁺ toxicity resistance, while SH8 or PCC6803 alone barely immobilized Cd²⁺. In addition, the SH8-PCC6803 consortium, but not SH8 alone, could grow in a carbon-free medium, suggesting that autotrophic PCC6803 enabled the growth of heterotrophic SH8. Totally, 12 metabolites were significantly changed when SH8 was added to PCC6803 culture in the presence of Cd²⁺ (PCC6803/Cd²⁺). Among them, kynurenic acid was the only metabolite that precipitated Cd²⁺. Remarkably, adding kynurenic acid increased the growth of PCC6803/Cd²⁺ by 14.1 times. Consistently, the expressions of kynA, kynB, and kynT genes, known to be essential for kynurenic acid synthesis, were considerably increased when SH8 was added to PCC6803/Cd²⁺. Collectively, kynurenic acid secreted by SH8 mitigates Cd²⁺ toxicity for algae, and algae provide organic carbon for the growth of SH8, unveiling a critical link that mediates beneficial bacteria-algae interaction to resist Cd²⁺.

Mycosynthesis of Metal-Containing Nanoparticles-Fungal Metal Resistance and Mechanisms of Synthesis

In the 21st century, nanomaterials play an increasingly important role in our lives with applications in many sectors, including agriculture, biomedicine, and biosensors. Over the last two decades, extensive research has been conducted to find ways to synthesise nanoparticles (NPs) via mediation with fungi or fungal extracts. Mycosynthesis can potentially be an energy-efficient, highly adjustable, environmentally benign alternative to conventional physico-chemical procedures. This review investigates the role of metal toxicity in fungi on cell growth and biochemical levels, and how their strategies of resistance, i.e., metal chelation, biomineral formation, biosorption, bioaccumulation, compartmentalisation, and efflux of metals from cells, contribute to the synthesis of metal-containing NPs used in different applications, e.g., biomedical, antimicrobial, catalytic, biosensing, and precision agriculture. The role of different synthesis conditions, including that of fungal biomolecules serving as nucleation centres or templates for NP synthesis, reducing agents, or capping agents in the synthesis process, is also discussed. The authors believe that future studies need to focus on the mechanism of NP synthesis, as well as on the influence of such conditions as pH, temperature, biomass, the concentration of the precursors, and volume of the fungal extracts on the efficiency of the mycosynthesis of NPs.

Comparative Copper Resistance Strategies of Rhodonia placenta and Phanerochaete chrysosporium in a Copper/Azole-Treated Wood Microcosm

Copper-based formulations of wood preservatives are widely used in industry to protect wood materials from degradation caused by fungi. Wood treated with preservatives generate toxic waste that currently cannot be properly recycled. Despite copper being very efficient as an antifungal agent against most fungi, some species are able to cope with these high metal concentrations. This is the case for the brown-rot fungus Rhodonia placenta and the white-rot fungus Phanerochaete chrysosporium, which are able to grow efficiently in pine wood treated with Tanalith E3474. Here, we aimed to test the abilities of the two fungi to cope with copper in this toxic environment and to decontaminate Tanalith E-treated wood. A microcosm allowing the growth of the fungi on industrially treated pine wood was designed, and the distribution of copper between mycelium and wood was analysed within the embedded hyphae and wood particles using coupled X-ray fluorescence spectroscopy and Scanning Electron Microscopy (SEM)/Electron Dispersive Spectroscopy (EDS). The results demonstrate the copper biosorption capacities of P. chrysosporium and the production of copper-oxalate crystals by R. placenta. These data coupled to genomic analysis suggest the involvement of additional mechanisms for copper tolerance in these rot fungi that are likely related to copper transport (import, export, or vacuolar sequestration).

Potential Use of Microbial Fuel Cell Technology in Wastewater Treatment

Two options, in regard to applying microbial fuel cells (MFCs) in water treatment, are under discussion, namely the conversion of the chemical energy of organic substrates to electricity, as well as the use their potential to reduce different species, such as the ionic form of copper (Cu2+ converted to metal copper) and iron (Fe3+ converted to Fe2+). The high reduction potential of Cu2+ and Fe3+ makes the processes of electricity production and metal reduction, to be performed simultaneously in MFC, achievable. The electrical yield measurement during the experiments of anodic organic matter degradation by MFC in treating an artificial wastewater with chemical oxygen demand (COD) 0.6 and 1.6 g O2·dm−3, as initial COD, are given. It is demonstrated that the higher organic load is associated with better electrical yield. A comparison of MFC and conventional anaerobic digestion performance is discussed, as well. Experimental proofs of copper removal and phosphate mobilization, following the iron reduction of FePO4, are also reported.

Mineralization of lead by Phanerochaete chrysosporium microcapsules loaded with hydroxyapatite

In this study, microcapsules assembled with Phanerochaete chrysosporium (P. chrysosporium, PC) and hydroxyapatite (HAP) were successfully prepared and applied for Pb(II) immobilization in aqueous solution. The effect of different conditions on Pb(II) removal was investigated, such as pH, temperature, dosages of microcapsules and HAP, and initial concentrations of Pb(II). The removal efficiency of Pb(II) was in order of HAP+PC > HAP > PC > CK (control check) at the Pb(II) initial concentration of 100 mg L^-1, which were 87.7%, 82.82%, 63.67% and 2.06%, respectively. Under HAP+PC treatment, P. chrysosporium secreted plentiful organic acids like formic, oxalic and citric acids, when the addition dose of HAP increased from 5 g L^-1 to 15 g L^-1, the production of formic acid increased remarkably from 32.37 g L^-1 to 66.02 g L^-1. After reaction, P. chrysosporium kept a good biological activity evidenced by the live/dead stain test. The characterization results indicated that the insoluble apatite could transform to soluble phosphate due to the secreted organic acids, then reacted with Pb(II) to form pyromorphite [Pb₁₀(PO₄)₆Cl₂] and lead phosphate hydroxide [Pb₁₀(PO₄)₆(OH)₂]. The overall results clearly demonstrated that combining P. chrysosporium with HAP could be used as a promising technology to accelerate lead immobilization.

Layers of Uranium Phosphate Nanorods and Nanoplates Encrusted on Fungus Cladosporium sp. Strain F1 Hyphae

The hyphae of Cladosporium sp. strain F1 (CFGR 2020-301-00084) were heavily encrusted with pre-synthesized uranium phosphate minerals under a wide range of pH conditions. SEM and TEM images showed that nanorods and nanoplates of uranium phosphate minerals at pH 4 and 5 and at pH 6, 7, and 8, respectively, were tightly adsorbed along the hyphae of Cladosporium sp. strain F1, while only a few uranium phosphate minerals were observed on the hyphae of Aspergillus niger VKMF 1119. Based on the physical mobility and chemical stability of uranium phosphate minerals under in situ oxidizing environmental conditions, the application of Cladosporium sp. strain F1 has potential as a novel strategy for the remediation of uranium contamination in sediments and aquifers under a wide range of pH conditions where larger amounts of phosphate are present in the environment.

Physiology of microalgal biofilm: a review on prediction of adhesion on substrates

In view of high energy cost and water consumption in microalgae cultivation, microalgal-biofilm-based cultivation system has been advocated as a solution toward a more sustainable and resource friendlier system for microalgal biomass production. Algal-derived extracellular polymeric substances (EPS) form cohesive network to interconnect the cells and substrates; however, their interactions within the biofilm are poorly understood. This scenario impedes the biofilm process development toward resource recovery. Herein, this review elucidates on various biofilm cultivation modes and contribution of EPS toward biofilm adhesion. Immobilized microalgae can be envisioned by the colloid interactions in terms of a balance of both dispersive and polar interactions among three interfaces (cells, mediums and substrates). Last portion of this review is dedicated to the future perspectives and challenges on the EPS; with regard to the biopolymers extraction, biopolymers’ functional description and cross-referencing between model biofilms and full-scale biofilm systems are evaluated. This review will serve as an informative reference for readers having interest in microalgal biofilm phenomenon by incorporating the three main players in attached cultivation systems: microalgae, EPS and supporting materials. The ability to mass produce these miniature cellular biochemical factories via immobilized biofilm technology will lay the groundwork for a more sustainable and feasible production.