Enhanced bioelectrochemical treatment of petroleum refinery wastewater with Labaneh whey as co-substrate

Development of an internal two-stage upflow anaerobic reactor integrating biostimulation strategies to enhance the degradation of aromatic compounds in wastewater from purified terephthalic acid and dimethyl terephthalate manufacturing processes

In this study, we aimed to establish high-rate biological treatment of purified terephthalic acid (PTA) and dimethyl terephthalate (DMT) wastewater that minimizes the inhibitory effects of high concentration benzoate and acetate. To achieve this, we developed a novel bioreactor system and biostimulation strategy. An internal two-stage upflow anaerobic (ITUA) reactor was operated with (i) a packed bed containing green tuff medium underlying (ii) a compartment seeded with anaerobic granular sludge. Ethylene glycol was amended to stimulate syntrophic interactions. Continuous operation of the system for 1,026 days achieve an organic removal rate of 11.0 ± 0.6 kg COD/m3/d. The abundance of aromatic degraders significantly increased during operation. Thus, we successfully developed a high-rate treatment system to treat wastewater from the PTA/DMT manufacturing processes by activating syntrophs in an ITUA reactor.

Electrochemical process for petroleum refinery wastewater treatment to produce power and hydrogen using microbial electrolysis cell

This research aims to assess the microbial electrolysis cell (MEC) fed with petroleum refinery wastewater (PRW) to produce power density and bio-electrochemical hydrogen. The MEC produces a maximum bio-electricity of 21.4 mA and a power density of 1200123.90 W/m2 with a loading of chemical oxygen demand (COD) of 17000 mg/L. Due to catalyzed oxidation of complex compounds in PRW with a maintained microbial biofilm growth was observed after 90 d of operation of MEC. Results showed that the oxidation of organic substances in PRW enhanced the size in the growth of microbial film which further increased the generation of electrons leading to current density of 5890 mA/m2. The COD removal efficiency of MEC was found to be 89.9%. The bio-electricity and hydrogen production of the MEC was estimated to be 24.5 mA and 19.2 L respectively when loaded with PRW having a COD of 17500 mg/L after 130 d. Present experiments demonstrate the efficiency of MEC technology efficiency in treating petroleum wastewater with the help of microbial biofilm.

Enhanced electron recovery by optimizing sandwich structure agricultural waste corncob filled anode in microbial electrochemical system to facilitate wastewater denitrification

Microbial electrochemical system autotrophic denitrification has attracted much attention due to its cost-efficiency and clean advantages. The autotrophic denitrification rate highly depends on the input electrons to the cathode. In this study, agricultural waste corncob was filled into sandwich structure anode as low-cost carbon source for electron production. The COMSOL software was used to guide the construction of sandwich structure anode to control carbon source release and enhance electron collection, including suitable pore size (4 mm) and current collector arrangement (five branches). Optimized sandwich structure anode system with the help of 3D printing obtained a higher denitrification efficiency (21.79 ± 0.22 gNO₃^--N/m³d) than anodic systems without pore and current collector. Statistical analysis showed that enhanced autotrophic denitrification efficiency was the responsible for enhanced denitrification performance of the optimized anode system. This study provides a strategy to improve the autotrophic denitrification performance of the microbial electrochemical system by optimizing the anode structure.

Simultaneous bioremediation of petroleum hydrocarbons and production of biofuels by the micro-green alga, cyanobacteria, and its consortium

There are two major problems in the world, fuel deficiency and environmental pollution by fossil fuels. Microalgae are regarded as one of the most feasible feedstocks for the manufacturing of biofuels and are used in the degradation of fossil fuel spills. The present study was possessed to investigate the ability of green alga Chlorella vulgaris, blue-green alga Synechococcus sp, and its consortium to grow and degrade hydrocarbon such as kerosene (k) with different concentrations (0, 0.5, 1, and 1,5%), and also using algal biomasses to produce biofuel. The algal growth was estimated by optical density (O.D) at 600 nm, pigment contents such as Chlorophyll a,b carotenoid, and dry weight. The kerosene degradation was estimated by FT-IR analysis after and before the cultivation of algae and its consortium. The components of the methanol extract were determined by GC-MS spectroscopy. The results denote the best growth was determined by O.D, algae consortium with 1.5% Kerosene after ten days, meanwhile, the highest dry weight was with C. vulgaris after ten days of cultivation. The FT-IR demonstrated the algae and consortium possessed high efficacy to degrade kerosene. After 15 days of algae cultivation with 1% K, C.vulgaris produced the maximum amount of lipids (32%). The GC-MS profile of methanol extract of two algae and consortium demonstrated that Undecane was presented in high amounts, C.vulgaris (19.9%), Synechococcussp (82.16%), algae consortium (79.51%), and also were presented moderate amounts of fatty acid methyl ester in Synechococcus sp. Overall, our results indicate that a consortium of algae can absorb and remove kerosene from water, and at the same time produce biofuels like biodiesel and petroleum-based fuels.

Electroactive Bacteria in Natural Ecosystems and Their Applications in Microbial Fuel Cells for Bioremediation: A Review

Electroactive bacteria (EAB) are natural microorganisms (mainly Bacteria and Archaea) living in various habitats (e.g., water, soil, sediment), including extreme ones, which can interact electrically each other and/or with their extracellular environments. There has been an increased interest in recent years in EAB because they can generate an electrical current in microbial fuel cells (MFCs). MFCs rely on microorganisms able to oxidize organic matter and transfer electrons to an anode. The latter electrons flow, through an external circuit, to a cathode where they react with protons and oxygen. Any source of biodegradable organic matter can be used by EAB for power generation. The plasticity of electroactive bacteria in exploiting different carbon sources makes MFCs a green technology for renewable bioelectricity generation from wastewater rich in organic carbon. This paper reports the most recent applications of this promising technology for water, wastewater, soil, and sediment recovery. The performance of MFCs in terms of electrical measurements (e.g., electric power), the extracellular electron transfer mechanisms by EAB, and MFC studies aimed at heavy metal and organic contaminant bioremediationF are all described and discussed.

Bioaugmentation and enhanced formation of biogranules for degradation of oil and grease: Start-up, kinetic and mass transfer studies

Biogranulation technology is an emerging biological process in treating various wastewater. However, the development of biogranules requires an extended period of time when treating wastewaters with high oil and grease (O&G) content. A study was therefore conducted to assess the formation of biogranules through bioaugmentation with the Serratia marcescens SA30 strain, in treating real anaerobically digested palm oil mill effluent (AD-POME), with O&G of about 4600 mg/L. The biogranules were developed in a lab-scale sequencing batch reactor (SBR) system under alternating anaerobic and aerobic conditions. The experimental data were assessed using the modified mass transfer factor (MMTF) models to understand the mechanisms of biosorption of O&G on the biogranules. The system was run with variable organic loading rates (OLR) of 0.69-9.90 kg/m³d and superficial air velocity (SAV) of 2 cm/s. After 60 days of being bioaugmented with the Serratia marcescens SA30 strain, the flocculent biomass transformed into biogranules with excellent settleability with improved treatment efficiency. The biogranules showed a compact structure and good settling ability with an average diameter of about 2 mm, a sludge volume index at 5 min (SVI₅) of 43 mL/g, and a settling velocity (SV) of 81 m/h after 256 days of operation. The average removal efficiencies of O&G increased from 6 to 99.92%, respectively. The application of the MMTF model verified that the resistance to O&G biosorption is controlled via film mass transfer. This research indicates successful bioaugmentation of biogranules using the Serratia marcescens SA30 strain for enhanced biodegradation of O&G and is capable to treat real AD-POME.

Sustainable production of biosurfactants via valorisation of industrial wastes as alternate feedstocks

Globally, the rapid increase in the human population has given rise to a variety of industries, which have produced a variety of wastes. Due to their detrimental effects on both human and environmental health, pollutants from industry have taken centre stage among the various types of waste produced. The amount of waste produced has therefore increased the demand for effective waste management. In order to create valuable chemicals for sustainable waste management, trash must be viewed as valuable addition. One of the most environmentally beneficial and sustainable choices is to use garbage to make biosurfactants. The utilization of waste in the production of biosurfactant provides lower processing costs, higher availability of feedstock and environmental friendly product along with its characteristics. The current review focuses on the use of industrial wastes in the creation of sustainable biosurfactants and discusses how biosurfactants are categorized. Waste generation in the fruit industry, agro-based industries, as well as sugar-industry and dairy-based industries is documented. Each waste and wastewater are listed along with its benefits and drawbacks. This review places a strong emphasis on waste management, which has important implications for the bioeconomy. It also offers the most recent scientific literature on industrial waste, including information on the role of renewable feedstock for the production of biosurfactants, as well as the difficulties and unmet research needs in this area.

Anaerobic recalcitrance in wastewater treatment: A review

Anaerobic treatment is applied as an alternative to traditional aerobic treatment for recalcitrant compound degradation. This review highlighted the recalcitrant compounds in wastewaters and their pathways under aerobic and anaerobic conditions. Forty-one recalcitrant compounds commonly found in wastewater along with associated anaerobic removal performance were summarized from current research. Anaerobic degradability of wastewater could not be appropriately evaluated by BOD/COD ratio, which should only be suitable for determining aerobic degradability. Recalcitrant wastewaters with a low BOD/COD ratio may be handled by anaerobic treatments after the adaption and provision of sufficient electron donors. Novel indicator characterizing the anaerobic recalcitrance of wastewater is called for, essential for emergent needs to resource recovery from high-strength recalcitrant wastewater for fulfilling appeals of circular bioeconomy of modern societies.

Degradation of pyrene using single-chamber air-cathode microbial fuel cells: Electrochemical parameters and bacterial community changes

Pyrene, a typical four-ring polycyclic aromatic hydrocarbon, is abundantly present in the environment and is potentially harmful to the human body. In this study, single-chamber air-cathode microbial fuel cells (MFCs) were used to treat pyrene, and the ensuing degradation, electrical parameters, and microbial changes were analyzed. The results showed that MFCs could degrade pyrene, and the maximum degradation rate for 30 mg/L reached 88.1 ± 5.4%. The addition of pyrene reduced the electrical performance of the MFCs and suppressed the power output. Analysis of the anodic microbial community showed that the proportion of Alcaligenes and Stenotrophomonas increased with an increase in pyrene concentration, which may explain the high degradation rate of pyrene.

Iron Oxide-Modified Carbon Electrode and Sulfate-Reducing Bacteria for Simultaneous Enhanced Electricity Generation and Tannery Wastewater Treatment

The microbial fuel cell (MFC) is emerging as a potential technology for extracting energy from wastes/wastewater while they are treated. The major hindrance in MFC commercialization is lower power generation due to the sluggish transfer of electrons from the biocatalyst (bacteria) to the anode surface and inefficient microbial consortia for treating real complex wastewater. To overcome these concerns, a traditional carbon felt (CF) electrode modification was carried out by iron oxide (Fe₃O₄) nanoparticles via facile dip-and-dry methods, and mixed sulfate-reducing bacteria (SRBs) were utilized as efficient microbial consortia. In the modified CF electrode with SRBs, a considerable improvement in the bioelectrochemical operation was observed, where the power density (309 ± 13 mW/m²) was 1.86 times higher than bare CF with SRBs (166 ± 11 mW/m²), suggesting better bioelectrochemical performance of an SRB-enriched Fe₃O₄@CF anode in the MFC. This superior activity can be assigned to the lower charge transfer resistance, higher conductance, and increased number of catalytic sites of the Fe₃O₄@CF electrode. The SRB-enriched Fe₃O₄@CF anode also assists in enhancing MFC performance in terms of COD removal (>75%), indicating efficient biodegradability of tannery wastewater and a higher electron transfer rate from SRBs to the conductive anode. These findings demonstrate that a combination of the favorable properties of nanocomposites such as Fe₃O₄@CF anodes and efficient microbes for treating complex wastes can encourage new directions for renewable energy–related applications.

Bioelectrochemical system as an innovative technology for treatment of produced water from oil and gas industry: A review

Disposal of the high volume of produced water (PW) is a big challenge to the oil and gas industry. High cost of conventional treatment facilities, increasing energy prices and environmental concern had focused governments and the industry itself on more efficient treatment methods. Bioelectrochemical system (BES) has attracted the attention of researchers because it represents a sustainable way to treat wastewater. This is the first review that summarizes the progress done in PW-fed BESs with a critical analysis of the parameters that influence their performances. Inoculum, temperature, hydraulic retention time, external resistance, and the use of real or synthetic produced water were found to be deeply related to the performance of BES. Microbial fuel cells are the most analyzed BES in this field followed by different types of microbial desalination cells. High concentration of sulfates in PW suggests that most of hydrocarbons are removed mainly by using sulfates as terminal electron acceptor (TEA), but other TEAs such as nitrate or metals can also be employed. The use of real PW as feed in experiments is highly recommended because biofilms when using synthetic PW are not the same. This review is believed to be helpful in guiding the research directions on the use of BES for PW treatment, and to speed up the practical application of BES technology in oil and gas industry.