Printing special surface components for THz 2D and 3D imaging

Tunable Device for Long Focusing in the Sub-THz Frequency Range Based on Fresnel Mirrors

THz radiation has gained great importance due to its potential applications in a wide variety of fields. For this reason, continuous efforts have been made to develop technological tools for use in this versatile band of the electromagnetic spectrum. Here, we propose a reflecting device with long focusing performances in the sub-THz band, using a bimirror device in which the relative angle is mechanically adjusted with the displacement of one of the mirrors. Despite the simplicity of the setup, the performance of this device is satisfactory down to a frequency of 0.1 THz. Theory and experience confirm that the bimirror is capable of focusing 0.1 THz radiation with a 2× magnification of the maximum input intensity while maintaining a longitudinal full width at half maximum (FWHM) of about 6 mm, which is about 12 times the depth of focus of a cylindrical optical element of the same focal length. In the absence of suitable THz equipment, the invariance property of the Fresnel diffraction integral allowed the predicted behavior to be tested in the THz range using conventional equipment operating at visible frequencies.

Short-wave infrared computed tomography

We demonstrate a short-wave infrared computed tomography method. It uses a fiber-coupled 1.44µm super-luminescent diode as light source, a PbSe photodiode as infrared detector, and an electronically controlled rotation and translation stage for high-speed Radon scanning. It is a safe and low power nondestructive testing method that can be used for the detection of plastic polymers, biological tissue and other materials that visible light cannot penetrate. We analyze the theoretical resolution of the method and build a short-wave infrared computed tomography system, which realizes the tomography and 3D reconstruction of black plastic bottles and artificial blood vessels. The measured resolution reaches10µm.