Differentiation of adipose-derived stem cells to chondrocytes using electrospraying

Acceleration of chondrogenic differentiation utilizing biphasic core-shell alginate sulfate electrospun nanofibrous scaffold

Engineering new biomedical materials with tailored physicochemical, mechanical and biological virtues in order to differentiate stem cells into chondrocytes for cartilage regeneration has garnered much scientific interest. In this study, core/shell nanofibrous scaffold based on poly(ɛ-caprolactone) (PCL) as a core material and alginate sulfate (AlgS)-poly(vinyl alcohol) (PVA) blend as shell materials (AlgS-PVA/PCL) was fabricated by emulsion electrospinning. In this vein, the influence of AlgS to PVA ratio (30:70, 50:50), organic to aqueous phase ratio (1:2, 1:3 and 1:5) and acid concentration (0, 10, 20, 30, 40 and 50 %) on nanofibers morphology were investigated. SEM images depicted that AlgS to PVA ratio of 30:70 and 50:50, organic to aqueous phase ratio of 1:3 and 1:5 and acid concentration of 30 % led to uniform, bead-free fibrous mats. AlgS-PVA/PCL scaffolds with AlgS to PVA ratio of 30:70 and organic to aqueous phase ratio of 1:3, showed admirable mechanical features, high porosity (>90 %) with desirable swelling ratio in wet condition. In vitro assays indicated that the AlgS-PVA/PCL scaffold surface had desirable interaction with stem cells and promotes cells attachment, proliferation and differentiation. Thus, we envision that this salient structure could be an intriguing construction as a cartilage tissue-engineered scaffold.

NGF-BMSC-SF/CS composites for repairing knee joint osteochondral defects in rabbits: evaluation of the repair effect and potential underlying mechanisms

BACKGROUND

With the rapid growth of the ageing population, chronic diseases such as osteoarthritis have become one of the major diseases affecting the quality of life of elderly people. The main pathological manifestation of osteoarthritis is articular cartilage damage. Alleviating and repairing damaged cartilage has always been a challenge. The application of cartilage tissue engineering methods has shown promise for articular cartilage repair. Many studies have used cartilage tissue engineering methods to repair damaged cartilage and obtained good results, but these methods still cannot be used clinically. Therefore, this study aimed to investigate the effect of incorporating nerve growth factor (NGF) into a silk fibroin (SF)/chitosan (CS) scaffold containing bone marrow-derived mesenchymal stem cells (BMSCs) on the repair of articular cartilage defects in the knees of rabbits and to explore the possible underlying mechanism involved.

MATERIALS AND METHODS

Nerve growth factor-loaded sustained-release microspheres were prepared by a double emulsion solvent evaporation method. SF/CS scaffolds were prepared by vacuum drying and chemical crosslinking. BMSCs were isolated and cultured by density gradient centrifugation and adherent culture. NGF-SF/CS-BMSC composites were prepared and implanted into articular cartilage defects in the knees of rabbits. The repair of articular cartilage was assessed by gross observation, imaging and histological staining at different time points after surgery. The repair effect was evaluated by the International Cartilage Repair Society (ICRS) score and a modified Wakitani score. In vitro experiments were also performed to observe the effect of different concentrations of NGF on the proliferation and directional differentiation of BMSCs on the SF/CS scaffold.

RESULTS

In the repair of cartilage defects in rabbit knees, NGF-SF/CS-BMSCs resulted in higher ICRS scores and lower modified Wakitani scores. The in vitro results showed that there was no significant correlation between the proliferation of BMSCs and the addition of different concentrations of NGF. Additionally, there was no significant difference in the protein and mRNA expression of COL2a1 and ACAN between the groups after the addition of different concentrations of NGF.

CONCLUSION

NGF-SF/CS-BMSCs improved the repair of articular cartilage defects in the knees of rabbits. This repair effect may be related to the early promotion of subchondral bone repair.

Advancements and Future Perspectives in Cell Electrospinning and Bio-Electrospraying

In recent years, researchers have tried to include living cells into electrospun nanofibers or droplets, leading to the field of live cell electrospinning and bio-electrospraying . In live cell electrospinning and bio-electrospraying, cells are embedded in a polymer and subject to the process of mechanical and electrical stimulation of the process. The resulting nanofiber mats or droplets with embedded cells have several potential applications in tissue engineering. The nanofiber structure provides a supportive and porous environment for cells to grow and interact with their surroundings. This can be favorable for tissue regeneration, where the goal is to create functional tissues that closely mimic the extracellular matrix. However, there are also challenges associated with live cell electrospinning and electrospraying, including maintaining cell viability and uniform cell distribution within the nanofiber mat. Additionally, the electrospinning/electrospraying process can have an impact on cell behavior, phenotype, and genotype, which must be cautiously monitored and studied. Overall, the goal of this review paper is to provide a comprehensive and critical analysis of the existing literature on cell electrospinning and bio-electrospraying.

Electrospun Nanofibers for Dura Mater Regeneration: A Mini Review on Current Progress

Dural defects are a common problem in neurosurgical procedures and should be repaired to avoid complications such as cerebrospinal fluid leakage, brain swelling, epilepsy, intracranial infection, and so on. Various types of dural substitutes have been prepared and used for the treatment of dural defects. In recent years, electrospun nanofibers have been applied for various biomedical applications, including dural regeneration, due to their interesting properties such as a large surface area to volume ratio, porosity, superior mechanical properties, ease of surface modification, and, most importantly, similarity with the extracellular matrix (ECM). Despite continuous efforts, the development of suitable dura mater substrates has had limited success. This review summarizes the investigation and development of electrospun nanofibers with particular emphasis on dura mater regeneration. The objective of this mini-review article is to give readers a quick overview of the recent advances in electrospinning for dura mater repair.

M1 to M2 induction in macrophages using a retinoic acid-releasing mesenchymal stem cell scaffold

BACKGROUND

Modulation of macrophage polarization is required for effective tissue repair and regenerative therapies. Therapeutic modulation of macrophages from an inflammatory M1 to a fibrotic M2 phenotype could help in diseases, such as chronic wounds, which are stalled in a prolonged and heightened inflammatory stage within the wound healing process.

OBJECTIVE

This study evaluates the efficiency of a pullulan/gelatin nanofiber scaffold loaded with retinoic acid (RA) and adipose-derived mesenchymal stem cells (ASCs) to modulate M1 to M2 anti-inflammatory transition.

METHODS

Scaffolds were fabricated by electrospinning, and crosslinked using ethylene glycol diglycidyl ether (EGDE). Exposure of RA and/or ASCs to cultured macrophages have been shown to promote M1 to M2 transition. Pullulan was chosen as a scaffold material due to its ability to quench reactive oxygen species, key signaling molecules that play an important role in the progression of inflammation, as well as for its excellent mechanical properties. Gelatin was chosen as an additional scaffold component due to the presence of cell-binding motifs and its biocompatibility. Scaffold compositions examined were 75:25 and 50:50, pullulan:gelatin. The scaffolds were crosslinked in 1:70 and 1:50 EGDE:EtOH. The scaffold composition was determined via FTIR. For the present study, the 75:25 pullulan:gelatin crosslinked with 1:70 EGDE:EtOH, forming nanofibers 328 ± 47.9 nm (mean ± SD) in diameter, was chosen as the scaffold composition due to its lower degradation and release rate, which allows a sustained delivery of RA.

RESULTS

The scaffold composition degraded to approximately 80% after 14 days, with approximately 38% of the drug released after 7 days. THP-1 monocytic cells were induced into a M1 macrophage phenotype through stimulation with lipopolysaccharide (LPS) and gamma interferon (IFN-γ). These M1 macrophages were the exposed to scaffolds loaded with RA and ASCs, to induce differentiation to an M2 phenotype.

CONCLUSION

Gene expression quantitation by qPCR showed a reduction of M1 biomarkers, tumor necrosis factor alpha (TNFα) and interleukin 1β (IL1β), and an increase of M2 biomarker CCL22 after 2 days of exposure, suggesting successful M1 to M2 transition.

Polyurethane/Liquid Crystal Microfibers with pDNA Polyplex Loadings for the Optimal Release and Promotion of HUVEC Proliferation

Fiber structures with connected pores resemble the natural extracellular matrix (ECM) in tissues, and show high potential for promoting the formation of natural functional tissue. The geometry of composite fibers produced by electrospinning is similar to that of the living-tissue ECM, in terms of structural complexity. The introduction of liquid crystals does not affect the morphology of fibers. The composite mat shows better hydrophilicity, with higher content of liquid crystal. At the same time, the higher the content of liquid crystal, the lower the modulus and tensile strength, and the higher the breaking energy and the elongation at break. Additionally, the factors affecting fibers are also investigated in this study. The addition of liquid crystals to the fibers' matrix can slow down the release of pDNA, which is the most common vehicle for genetic engineering, and the encapsulation of pDNA polymer into the fiber matrix can maintain biological activity. The continued release of the pDNA complex was achieved in this study through liquid crystals, and the effective release is controllable. In addition, the integration of liquid crystals into fibers with pDNA polymers can cause a faster transfection rate and promote HUVEC (Human Umbilical Vein Endothelial Cells) growth. It is possible to combine electrospun fibers containing LC (liquid crystal) with pDNA condensation technology to achieve the goal of a sustained release. The production of inductable tissue-building equipment can manipulate the required signals at an effective level in the local tissue microenvironment.

Chondrogenic Potential of Human Umbilical Cord Mesenchymal Stem Cells Cultured with Exosome-Depleted Fetal Bovine Serum in an Osteoarthritis Mouse Model

Osteoarthritis (OA) is characterized by the loss of articular cartilage and is also an age-related disease. Recently, stem cell therapy for cartilage repair has emerged. The stem cells need to be cultured with a fetal bovine serum (FBS)-supplemented medium. The effect of FBS-containing exosomes on the differentiation of human umbilical cord mesenchymal stem cells (HUCMSCs) is unknown. The morphology, proliferation, surface marker expressions, and trilineage differentiation ability of two groups of HUCMSCs, cultured with conventional (FBS) and exosome-depleted FBS (Exo(-)FBS), were evaluated. In a mouse OA model after two groups of HUCMSCs transplantation, the rotarod activity, histology, and immunohistochemistry (type II collagen, aggrecan, IL-1β, and MMP13) of the cartilage were evaluated. The Exo(-)FBS-cultured HUCMSCs, like FBS-cultured HUCMSCs, displayed classic MSC characteristics, including spindle-shaped morphology, surface marker expression (positive for CD44, CD73, CD90, CD105, and HLA-ABC and negative for CD34, CD45, and HLA-DR), and trilineage differentiation (chondrogenesis, osteogenesis, and adipogenesis). The Exo(-)FBS-cultured HUCMSCs proliferated significantly slower than those of the FBS-cultured HUCMSCs (p < 0.01). The trilineage gene expression of PPAR-γ, FABP4, APAL, type II collagen, aggrecan, and SOX9 was significantly increased in the Exo(-)FBS-cultured HUCMSCs than in the FBS-cultured HUCMSCs and undifferentiated controls. The Exo(-)FBS- and FBS-cultured HUCMSCs-transplanted mice showed a better rotarod activity than in the control OA mice (n = 3 in each group). A significant histological improvement in hyaline cartilage destruction after the transplantation of both types of FBS-cultured HUCMSCs was noted when compared with the OA knees. The Exo(-)FBS-cultured HUCMSCs-transplanted knees showed a higher International Cartilage Repair Society histological score (p < 0.05), staining intensity of type II collagen (p < 0.01), and aggrecan (p < 0.01) than in the control knees. Moreover, both types of the FBS-cultured HUCMSCs-transplanted knees significantly decreased the expression of MMP13 and IL-1β compared to that in the OA knees (p < 0.01). The Exo(-)FBS-cultured HUCMSCs harbor chondrogenic potential and attenuated cartilage destruction in a mouse OA model. Our study provides a basis for future clinical trials using Exo(-)FBS-cultured stem cells to treat OA.

A Concise Review on Electrospun Scaffolds for Kidney Tissue Engineering

Chronic kidney disease is one of the deadliest diseases globally and treatment methods are still insufficient, relying mostly on transplantation and dialysis. Engineering of kidney tissues in vitro from induced pluripotent stem cells (iPSCs) could provide a solution to this medical need by restoring the function of damaged kidneys. However, implementation of such approaches is still challenging to achieve due to the complexity of mature kidneys in vivo. Several strategies have been defined to obtain kidney progenitor endothelial and epithelial cells that could form nephrons and proximal tube cells, but these lack tissue maturity and vascularisation to be further implemented. Electrospinning is a technique that has shown promise in the development of physiological microenvironments of several tissues and could be applied in the engineering of kidney tissues. Synthetic polymers such as polycaprolactone, polylactic acid, and poly(vinyl alcohol) have been explored in the manufacturing of fibres that align and promote the proliferation and cell-to-cell interactions of kidney cells. Natural polymers including silk fibroin and decellularised extracellular matrix have also been explored alone and in combination with synthetic polymers promoting the differentiation of podocytes and tubular-specific cells. Despite these attempts, further work is still required to advance the applications of electrospun fibres in kidney tissue engineering and explore this technique in combination with other manufacturing methods such as bioprinting to develop more organised, mature and reproducible kidney organoids.

Translating Material Science into Bone Regenerative Medicine Applications: State-of-The Art Methods and Protocols

In the last 20 years, bone regenerative research has experienced exponential growth thanks to the discovery of new nanomaterials and improved manufacturing technologies that have emerged in the biomedical field. This revolution demands standardization of methods employed for biomaterials characterization in order to achieve comparable, interoperable, and reproducible results. The exploited methods for characterization span from biophysics and biochemical techniques, including microscopy and spectroscopy, functional assays for biological properties, and molecular profiling. This review aims to provide scholars with a rapid handbook collecting multidisciplinary methods for bone substitute R&D and validation, getting sources from an up-to-date and comprehensive examination of the scientific landscape.