Biodegradation of Indanthrene Blue RS dye in immobilized continuous upflow packed bed bioreactor using corncob biochar

Enhanced biodegradation of 2, 4-dichlorophenol in packed bed biofilm reactor by impregnation of polyurethane foam with Fe3O4 nanoparticles: Bio-kinetics, process optimization, performance evaluation and toxicity assessment

In this work, an effort has been made to enhance the efficacy of biological process for the effective degradation of 2, 4-dichlorophenol (2, 4-DCP) from wastewater. The polyurethane foam was modified with Fe3O4 nanoparticles and combined with polyvinyl alcohol, sodium alginate, and bacterial consortium for biodegradation of 2, 4-DCP in a packed bed biofilm reactor. The maximum removal efficiency of 2, 4-DCP chemical oxygen demand, and total organic carbon were found to be 92.51 ± 0.83 %, 86.85 ± 1.32, and 91.78 ± 1.24 %, respectively, in 4 days and 100 mg L-1 of 2, 4-DCP concentration at an influent loading rate of 2 mg L-1h-1 and hydraulic retention time of 50 h. Packed bed biofilm reactor was effective for up to four cycles to remove 2, 4-DCP. Growth inhibition kinetics were evaluated using the Edward model, yielding maximum growth rate of 0.45 day-1, inhibition constant of 110.6 mg L-1, and saturation constant of 62.3 mg L-1.

A review on the application of biochar as an innovative and sustainable biocarrier material in moving bed biofilm reactors for dye removal from environmental matrices

Dye decolorization through biological treatment techniques has been gaining momentum as it is based on suspended and attached growth biomass in both batch and continuous modes. Hence, this review focused on the contribution of moving bed biofilm reactors (MBBR) in dye removal. MBBR have been demonstrated to be an excellent technology for pollution extraction, load shock resistance, and equipment size and energy consumption reduction. The review went further to highlight different biocarrier materials for biofilm development this review identified biochar as an innovative and environmentally friendly material produced through the application of different kinds of reusable or recyclable wastes and biowastes. Biochar as a carbonized waste biomass could be a better competitor and environmentally friendly substitute to activated carbon given its lower mass costs. Biochar can be easily produced particularly in rural locations where there is an abundance of biomass-based trash. Given that circular bioeconomy lowers dependency on natural resources by turning organic wastes into an array of useful products, biochar empowers the creation of competitive goods. Thus, biochar was identified as a novel, cost-effective, and long-term management strategy since it brings about several essential benefits, including food security, climate change mitigation, biodiversity preservation, and sustainability improvement. This review concludes that integrating two treatment methods could greatly lead to better color, organic matter, and nutrients removal than a single biological MBBR treatment process.

A synergistic approach combining Adsorption and Biodegradation for effective treatment of Acid Blue 113 dye by Klebsiella grimontii entrapped Graphene Oxide-Calcium Alginate Hydrogel Beads

This study investigated the degradation of Acid Blue 113 (AB 113) dye using Klebsiella grimontii entrapped Graphene Oxide-Calcium Alginate Hydrogel beads (KG-GO-CA) in a Fluidized Bed Bioreactor (FBBR) under varying inlet loading rates. The minimum fluidization velocity of the KG-GO-CA hydrogel beads in FBBR was found to be 0.15 mm/s. The KG-GO-CA beads showed a maximum removal efficiency of 94.6% at an inlet flow rate of 20 mL/h over 15 days. Reusability studies indicated a removal efficiency of 70.6 ± 2.5% for AB 113 after the 12th cycle. Langmuir adsorption isotherm showed the best fit (R2 = 0.98724) with model parameters of Qm (203.83 mg/g) and Ki (0.0101 L/g). The study also confirmed that treated wastewater was more environmentally safe for domestic and commercial uses than untreated wastewater. The research highlights the potential use of KG-GO-CA hydrogel beads for removing dyes from wastewater.

Biodegradation of Congo Red Dye Using Lysinibacillus Species in a Moving Bed Biofilm Reactor: Continuous Study and Kinetic Evaluation

The objective of this work was to develop a low-cost and efficient biocarrier for biodegradation of azo dye (i.e., Congo red (CR) dye). The potential bacterial species, i.e., Lysinibacillus fusiformis KLM1 and Lysinibacillus macrolides KLM2, were isolated from the dye-contaminated site. These bacterial species were immobilized onto the polypropylene-polyurethane foam (PP-PUF) and employed in a moving bed biofilm reactor (MBBR) for the treatment of CR dye. The effectiveness of the MBBR was investigated by operating the bioreactor in a continuous mode at various initial CR dye concentrations (50-250 mg/L) for 113 days. The removal efficiency was found in the range of 88.4-64.6% when the initial dye concentration was varied from 50 to 250 mg/L. The maximum elimination capacity (EC) of 213.18 mg/L.d was found at 250 mg/L of CR dye concentration. In addition, the CR dye utilization rate in the MBBR was studied by using two kinetics, namely, first-order and second-order (Grau) models. The high regression coefficients (R2 > 0.97) and the satisfactory root mean square (RMSE) values (0.00096-0.02610) indicated the reasonable prediction of CR dye degradation rate by the Grau model.

Accelerated biodecolorization and detoxification of synthetic textile dye Acid Maroon V by bacterial consortium under redox mediator system

The treatment of textile industrial wastewater is an important concern owing to its negative impact on the biosphere. The present study highlighted dye decolorization potential of bacterial consortium EDPA containing Enterobacter dissolvens AGYP1 and Pseudomonas aeruginosa AGYP2 in the presence of redox mediators. Rapid decolorization of Acid Maroon V (100 mg l-1) was achieved in the presence of lawsone compared to other redox mediators. The dye decolorization was best fitted with first order kinetics with higher reaction kinetics (k1 = 0.328 h-1) and regression coefficient (R2 = 0.979). The removal of dye by the consortium was 1.47 times faster in 8 h with 0.01 mM lawsone. The consortium EDPA was able to decolorize 1200 mg l-1 concentration of dye with apparent R max , K m and R max /K m values 1000 mg l-1 h-1, 5000 mg l-1 and 0.2 h-1, respectively. The lawsone-mediated system could decolorize the dye 80.44% in 10 h at the end of 11 dye spiking cycle. The superior biodecolorization of 14 different textile dyes was obtained in the presence of lawsone-mediated system. The intracellular enzyme activities of azoreductase, NADH-DCIP reductase, laccase, manganese peroxidase and lignin peroxidase increased significantly. The sequential microaerophilic-aerobic incubation resulted into 89.31% reduction of total aromatic amines. The microbial toxicity, phytotoxicity and genotoxicity measurements revealed biotransformation of toxic nature of dye Acid Maroon V into non-toxic metabolites by the action of consortium EDPA, and thus its suitability for biotreatment of dye containing industrial effluents.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03466-6.

Immobilization of Biomass Materials for Removal of Refractory Organic Pollutants from Wastewater

In the field of environmental science and engineering, microorganisms, enzymes and algae are promising biomass materials that can effectively degrade pollutants. However, problems such as poor environmental adaptability, recycling difficulties, and secondary pollution exist in the practical application of non-immobilized biomass materials. Biomass immobilization is a novel environmental remediation technology that can effectively solve these problems. Compared with non-immobilized biomass, immobilized biomass materials have the advantages of reusability and stability in terms of pH, temperature, handling, and storage. Many researchers have studied immobilization technology (i.e., methods, carriers, and biomass types) and its applications for removing refractory organic pollutants. Based on this, this paper reviews biomass immobilization technology, outlines the mechanisms and factors affecting the removal of refractory organic pollutants, and introduces the application of immobilized biomass materials as fillers for reactors in water purification. This review provides some practical references for the preparation and application of immobilized biomass materials and promotes further research and development to expand the application range of this material for water purification.

Contrasting mobility of arsenic and copper in a mining soil: A comparative column leaching and pot testing approach

The remediation of legacy metal(loid) contaminated soils in-situ relies on the addition of [organic] amendments to reduce the mobility and bioavailability of metal(loid)s, improve soil geochemical parameters and restore vegetation growth. Two vermicomposts of food and animal manure waste origin (V₁ and V₂) were amended to an arsenic (As) and copper (Cu) contaminated mine soil (≤1500 mg kg^-1). Leaching columns and pot experiments evaluated copper and arsenic in soil pore waters, as well as pH, dissolved organic carbon (DOC) and phosphate (PO₄^3-) concentrations. The uptake of As and Cu to ryegrass was also measured via the pot experiment, whilst recovered biochars from the column leaching test were measured for metal sorption at the termination of leaching. Vermicompost amendment to soil facilitated ryegrass growth which was entirely absent from the untreated soil in the pot test. All amendment combinations raised pore water pH by ∼4 units. Copper concentrations in pore waters from columns and pots showed steep reductions (∼1 mg L^-1), as a result of V₁ & V₂ compared to untreated soil (∼500 mg L^-1). Combined with an increase in DOC and PO₄^3-, As was mobilised an order of magnitude by V₁. Biochar furthest reduced Cu in pore waters from the columns to <0.1 mg L^-1, as a result of surface sorption. The results of this study indicate that biochar can restrict the mobility of Cu from a contaminated mine soil after other amendment interventions have been used to promote revegetation. However, the case of As, biochar cannot counter the profound impact of vermicompost on arsenic mobility.

Use of bacterial isolates in the treatment of textile dye wastewater: A review

The textile industry uses large amounts of dyes like reactive, azo, anthraquinone, and triphenylmethane to colour textiles. Dyes that are not used up during the colouration process usually end up in water bodies as waste leading to the pollution of the water bodies. This makes the industry to be one of the major contributors to water pollution in the world. Bacterial agents isolated from various sources like dye contaminated soil and textile wastewater have shown to have the ability to effectively decolourise and degrade these dye pollutants leading to improved water quality. This review discusses bacterial isolates that have been used successfully to degrade and decolourise textile dyes, their mode of dye removal as well as the factors that affect their dye degradation ability. It further looks at the latest wastewater treatment technologies that incorporate bacterial microorganisms to treat dye wastewater.

•

Bacterial isolates offer environmentally friendly solution to dye degradation.

•

Pure and mixed bacterial cultures can remove textile dyes in optimised conditions.

•

Dyes are removed through biosorption or biodegradation mechanisms.

•

Latest technologies provide more effective dye removal options.

Recent advances in biochar technology for textile dyes wastewater remediation: A review

With the continuous rise of industrialization and agriculture, the concentration of organic contaminants such as dyes in the ecosystem has increased in subsequent years, causing major environmental contamination. Adsorption has been revealed to be a reliable and cost-effective way of eliminating organic pollutants. Biochar technology has the potential of converting trash into treasure when utilized for environmental remediation since it has numerous benefits such as the availability of diverse types of raw materials, low cost, and reusability. The potential of biochar as an adsorbent, support for catalysis, and a composite catalyst for dye degradation and mineralization is summarized in this research. It discusses its current research status in the adsorption and degradation of various dyes, incorporates the pertinent adsorption variables, encapsulates its regeneration techniques, investigates its engineering applications, and finally analyses limitations and discusses future development prospects.

Biodegradation of Congo red dye using polyurethane foam-based biocarrier combined with activated carbon and sodium alginate: Batch and continuous study

Dyes are an important class of organic pollutants and are well known for their adverse effects on aquatic life and human beings. In this work, an effort has been made to treat the dye-containing wastewater using modified biocarriers in packed bed bioreactors (PBBRs). Lysinibacillus sp. immobilized polyurethane foam combined with activated carbon and sodium alginate was used for the biodegradation of Congo red dye. The optimum values of process time, glucose concentration, and dye concentration were obtained to be 4.0 days, 2.0 g/L, and 50 mg/L, respectively. The maximum dye removal efficiency (RE) of 92.63 % was obtained at the optimized conditions. The continuous PBBR offered a maximum RE and elimination capacity of 90.73% and 10.89 mg/L. d, respectively, at an inlet loading rate of 12 mg/L. d. Moreover, the growth kinetic of Lysinibacillus sp. was well predicted by the Andrew-Haldane model with a regression coefficient of 0.98.

Removal of Reactive Black 5 Dye by Banana Peel Biochar and Evaluation of Its Phytotoxicity on Tomato

Removal of Reactive Black 5 (RB5) dye from an aqueous solution was studied by its adsorption on banana peel biochars (BPBs). The factors affecting RB5 dye adsorption such as pH, exposure time, RB5 dye concentration, adsorbent dose, particle size and temperature were investigated. Maximum 97% RB5 dye removal was obtained at pH 3 with 75 mg/L adsorbate concentration by banana peel biochars. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) were used to characterize the adsorbent material. The data of equilibrium were analyzed by Langmuir and Freundlich isotherm models. The experimental results were best reflected by Langmuir isotherm with maximum 7.58 mg/g adsorption capacity. Kinetic parameters were explored and pseudo-second order was found suitable which reflected that rate of adsorption was controlled by physisorption. Thermodynamic variables exhibited that the sorption process was feasible, spontaneous, and exothermic in nature. Banana peel biochar showed excellent regeneration efficiency up to five cycles of successive adsorption-desorption. Banana peel biochar maintained >38% sorption potential of RB5 dye even after five cycles of adsorption-desorption. The phytotoxic study exhibited the benign nature of BPB-treated RB5 dye on tomato seeds.