Investigating the suitability of poly tetraarylphosphonium based anion exchange membranes for electrochemical applications

Surface Bioengineering of Mo2Ga2C MAX Phase to Develop Blended Loose Nanofiltration Membranes for Textile Wastewater Treatment

The potential of blended loose nanofiltration membranes (LNMs) to fractionate dyes and inorganic salts in textile wastewater has become a focus of attention in recent years. In this research work, we fabricated LNMs based on polysulfone (PSf) membranes blended with l-histidine amino acid-functionalized Mo2Ga2C MAX phase (His-MAX). Scanning electron microscopy (SEM), atomic force microscopy (AFM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), contact angle, ζ-potential, porosity, and pore size analyses were employed to characterize the LNMs. Blending 0.75 wt % of His-MAX additive with the PSf tailored the LNM's features by making it more water-friendly, increasing its porosity, enlarging its pores, and making its surface smoother. The pure water flux of 127.6 L/m2 h was achieved by LNM containing 0.75 wt % His-MAX, which was 2.5 times greater than the bare one. The mentioned LNM displayed a flux recovery ratio (FRR) of 68.27 and 98.57, 98.31, and 99.7% rejections for Direct red 23, Acid brown 75, and Reactive blue 21 solutions (100 mg/L), respectively. The 0.75 wt % His-MAX LNM could reject 99.1% of dye and 11.5% of salt while maintaining an FRR of 91.19% after four cycles of filtering a binary mixture solution containing Reactive blue 21 and Na2SO4. These findings highlight the potential of the fabricated LNM for desalinating dye solutions.

Physically and Chemically Stable Anion Exchange Membranes with Hydrogen-Bond Induced Ion Conducting Channels

Anion exchange membranes (AEMs) with desirable properties are the crucial components for numerous energy devices such as AEM fuel cells (AEMFCs), AEM water electrolyzers (AEMWEs), etc. However, the lack of suitable AEMs severely limits the performance of devices. Here, a series of physically and chemically stable AEMs have been prepared by the reaction between the alkyl bromine terminal ether-bond-free aryl backbone and the urea group-containing crosslinker. Morphology analyses confirm that the hydrogen bonding interaction between urea groups is capable of driving the ammonium cations to aggregate and further form continuous ion-conducting channels. Therefore, the resultant AEM demonstrates remarkable OH− conductivity (59.1 mS cm−1 at 30 °C and 122.9 mS cm−1 at 90 °C) despite a moderate IEC (1.77 mmol g−1). Simultaneously, due to the adoption of ether-bond-free aryl backbone and alkylene chain-modified trimethylammonium cation, the AEM possesses excellent alkaline stability (87.3% IEC retention after soaking in 1 M NaOH for 1080 h). Moreover, the prepared AEM shows desirable mechanical properties (tensile stress > 25 MPa) and dimensional stability (SR = 20.3% at 90 °C) contributed by the covalent-bond and hydrogen-bond crosslinking network structures. Moreover, the resulting AEM reaches a peak power density of 555 mW cm−2 in an alkaline H2/O2 single fuel cell at 70 °C without back pressure. This rational structural design presented here provides inspiration for the development of high-performance AEMs, which are crucial for membrane technologies.

High Performance of Anion Exchange Blend Membranes Based on Novel Phosphonium Cation Polymers for All-Vanadium Redox Flow Battery Applications

The deployment of alkaline anion exchange membranes (AEMs) in flow battery applications has the advantage of a low cationic species crossover rate. However, the alkaline stability conjugated to the low conductivity of hydroxide ions of anion exchange membranes (AEMs) still represents a major drawback for the large deployment of such technology. In this study, three types of tetraarylpolyphosphonium (pTAP)-based copolymers (namely, CP1, CP2, and CP3) are synthesized and blended with chitosan and polyvinylidene fluoride (PVDF) for the fabrication of AEMs. Chitosan, a green biopolymer, was employed as a blend to enhance the water uptake of the base ionomer matrix. It is proposed that the abundancy of hydroxyl groups in chitosan improves considerably the ionic conductivity, water transport, and ion selectivity of the membrane, together with facilitating the dispersion of the chitosan in the pTAP copolymer matrix. The purpose of blending PVDF is instead to provide stable mechanical strength to the composite blend. The chemical, mechanical, and thermal stabilities of the three fabricated composite-blend membranes (i.e., CM1, CM2, and CM3) were characterized. All the membranes exhibited a high water retaining capacity of up to 36.26% (recorded for CM2) along with a hydroxyl ion conductivity of 17.39 mS cm^-1. Due to the strong interactions between pTAP copolymers, chitosan, and PVDF polymers (confirmed also by Fourier transform infrared spectroscopy), the studied anion exchange membranes are able to retain up to 97% of the original OH conductivity after 1 M KOH treatment at room temperature for 100 h. The three membranes, namely, CM1, CM2, and CM3, have vanadium ion permeabilities measured at 20 °C of 1.775 × 10^-8, 1.718 × 10^-8, and 1.648 × 10^-8 cm²/s, respectively, which are lower than that for the commercially available Nafion. The good stability and remarkable cell performance of the composite-blend membranes reported here make them definitely excellent candidates for the future generation of vanadium redox flow batteries.