Proteomic study of Desulfovibrio ferrophilus IS5 reveals overexpressed extracellular multi-heme cytochrome associated with severe microbiologically influenced corrosion

Surface roughness influence on extracellular electron microbiologically influenced corrosion of C1018 carbon steel by Desulfovibrio ferrophilus IS5 biofilm

Carbon steel microbiologically influenced corrosion (MIC) by sulfate reducing bacteria (SRB) is known to occur via extracellular electron transfer (EET). A higher biofilm sessile cell count leads to more electrons being harvested for sulfate reduction by SRB in energy production. Metal surface roughness can impact the severity of MIC by SRB because of varied biofilm attachment. C1018 carbon steel coupons (1.2 cm2 top working surface) polished to 36 grit (4.06 μm roughness which is relatively rough) and 600 grit (0.13 μm) were incubated in enriched artificial seawater inoculated with highly corrosive Desulfovibrio ferrophilus IS5 at 28 ℃ for 7 d and 30 d. It was found that after 7 d of SRB incubation, 36 grit coupons had a 11% higher sessile cell count at (2.0 ± 0.17) × 108 cells/cm2, 52% higher weight loss at 22.4 ± 5.9 mg/cm2 (1.48 ± 0.39 mm/a uniform corrosion rate), and 18% higher maximum pit depth at 53 μm compared with 600 grit coupons. However, after 30 d, the differences diminished. Electrochemical tests with transient information supported the weight loss data trends. This work suggests that a rougher surface facilitates initial biofilm establishment but provides no long-term advantage for increased biofilm growth.

Nitrate and oxygen significantly changed the abundance rather than structure of sulphate-reducing and sulphur-oxidising bacteria in water retrieved from petroleum reservoirs

Sulphate-reducing bacteria (SRB) are the main culprits of microbiologically influenced corrosion in water-flooding petroleum reservoirs, but some sulphur-oxidising bacteria (SOB) are stimulated when nitrate and oxygen are injected, which control the growth of SRB. This study aimed to determine the distributions of SRB and SOB communities in injection-production systems and to analyse the responses of these bacteria to different treatments involving nitrate and oxygen. Desulfovibrio, Desulfobacca, Desulfobulbus, Sulfuricurvum and Dechloromonas were commonly detected via 16S rRNA gene sequencing. Still, no significant differences were observed for either the SRB or SOB communities between injection and production wells. Three groups of water samples collected from different sampling sites were incubated. Statistical analysis of functional gene (dsrB and soxB) clone libraries and quantitative polymerase chain reaction showed that the SOB community structures were more strongly affected by the nitrate and oxygen levels than SRB clustered according to the sampling site; moreover, both the SRB and SOB community abundances significantly changed. Additionally, the highest SRB inhibitory effect and the lowest dsrB/soxB ratio were obtained under high concentrations of nitrate and oxygen in the three groups, suggesting that the synergistic effect of nitrate and oxygen level was strong on the inhibition of SRB by potential SOB.

Metagenomic profiles of archaea and bacteria within thermal and geochemical gradients of the Guaymas Basin deep subsurface

Previous studies of microbial communities in subseafloor sediments reported that microbial abundance and diversity decrease with sediment depth and age, and microbes dominating at depth tend to be a subset of the local seafloor community. However, the existence of geographically widespread, subsurface-adapted specialists is also possible. Here, we use metagenomic and metatranscriptomic analyses of the hydrothermally heated, sediment layers of Guaymas Basin (Gulf of California, Mexico) to examine the distribution and activity patterns of bacteria and archaea along thermal, geochemical and cell count gradients. We find that the composition and distribution of metagenome-assembled genomes (MAGs), dominated by numerous lineages of Chloroflexota and Thermoproteota, correlate with biogeochemical parameters as long as temperatures remain moderate, but downcore increasing temperatures beyond ca. 45 ºC override other factors. Consistently, MAG size and diversity decrease with increasing temperature, indicating a downcore winnowing of the subsurface biosphere. By contrast, specific archaeal MAGs within the Thermoproteota and Hadarchaeota increase in relative abundance and in recruitment of transcriptome reads towards deeper, hotter sediments, marking the transition towards a specialized deep, hot biosphere.

Formation of biologically influenced palladium microstructures by Desulfovibrio desulfuricans and Desulfovibrio ferrophilus IS5

A range of Desulfovibrio spp. can reduce metal ions to form metallic nanoparticles that remain attached to their surfaces. The bioreduction of palladium (Pd) has been given considerable attention due to its extensive use in areas of catalysis and electronics and other technological domains. In this study we report, for the first time, evidence for Pd(II) reduction by the highly corrosive Desulfovibrio ferrophilus IS5 strain to form surface attached Pd nanoparticles, as well as rapid formation of Pd(0) coated microbial nanowires. These filaments reached up to 8 µm in length and led to the formation of a tightly bound group of interconnected cells with enhanced ability to attach to a low carbon steel surface. Moreover, when supplied with high concentrations of Pd (≥ 100 mmol Pd(II) g^-1 dry cells), both Desulfovibrio desulfuricans and D. ferrophilus IS5 formed bacteria/Pd hybrid porous microstructures comprising millions of cells. These three-dimensional structures reached up to 3 mm in diameter with a dose of 1200 mmol Pd(II) g^-1 dry cells. Under suitable hydrodynamic conditions during reduction, two-dimensional nanosheets of Pd metal were formed that were up to several cm in length. Lower dosing of Pd(II) for promoting rapid synthesis of metal coated nanowires and enhanced attachment of cells onto metal surfaces could improve the efficiency of various biotechnological applications such as microbial fuel cells. Formation of biologically stimulated Pd microstructures could lead to a novel way to produce metal scaffolds or nanosheets for a wide variety of applications.

Photosynthetic microbial fuel cells for methanol treatment using graphene electrodes

Photosynthetic microbial fuel cells (pMFC) represent a promising approach for treating methanol (CH₃OH) wastewater. However, their use is constrained by a lack of knowledge on the extracellular electron transfer capabilities of photosynthetic methylotrophs, especially when coupled with metal electrodes. This study assessed the CH₃OH oxidation capabilities of Rhodobacter sphaeroides 2.4.1 in two-compartment pMFCs. A 3D nickel (Ni) foam modified with plasma-grown graphene (Gr) was used as an anode, nitrate mineral salts media (NMS) supplemented with 0.1% CH₃OH as anolyte, carbon brush as cathode, and 50 mM ferricyanide as catholyte. Two simultaneous pMFCs that used bare Ni foam and carbon felt served as controls. The Ni/Gr electrode registered a two-fold lower charge transfer resistance (0.005 kΩ cm²) and correspondingly 16-fold higher power density (141 mW/m²) compared to controls. The underlying reasons for the enhanced performance of R. sphaeroides at the graphene interface were discerned. The real-time polymerase chain reaction (PCR) analysis revealed the upregulation of cytochrome c oxidase, aa3 type, subunit I gene, and Flp pilus assembly protein genes in the sessile cells compared to their planktonic counterparts. The key EET pathways used for sustaining CH₃OH oxidation were discussed.

Molecular regulation of conditioning film formation and quorum quenching in sulfate reducing bacteria

Sensing surface topography, an upsurge of signaling biomolecules, and upholding cellular homeostasis are the rate-limiting spatio-temporal events in microbial attachment and biofilm formation. Initially, a set of highly specialized proteins, viz. conditioning protein, directs the irreversible attachment of the microbes. Later signaling molecules, viz. autoinducer, take over the cellular communication phenomenon, resulting in a mature microbial biofilm. The mandatory release of conditioning proteins and autoinducers corroborated the existence of two independent mechanisms operating sequentially for biofilm development. However, both these mechanisms are significantly affected by the availability of the cofactor, e.g., Copper (Cu). Generally, the Cu concentration beyond threshold levels is detrimental to the anaerobes except for a few species of sulfate-reducing bacteria (SRB). Remarkably SRB has developed intricate ways to resist and thrive in the presence of Cu by activating numerous genes responsible for modifying the presence of more toxic Cu(I) to Cu(II) within the periplasm, followed by their export through the outer membrane. Therefore, the determinants of Cu toxicity, sequestration, and transportation are reconnoitered for their contribution towards microbial adaptations and biofilm formation. The mechanistic details revealing Cu as a quorum quencher (QQ) are provided in addition to the three pathways involved in the dissolution of cellular communications. This review articulates the Machine Learning based data curing and data processing for designing novel anti-biofilm peptides and for an in-depth understanding of QQ mechanisms. A pioneering data set has been mined and presented on the functional properties of the QQ homolog in Oleidesulfovibrio alaskensis G20 and residues regulating the multicopper oxidase properties in SRB.

Desulfoferrobacter suflitae gen. nov., sp. nov., a novel sulphate-reducing bacterium in the Deltaproteobacteria capable of autotrophic growth with hydrogen or elemental iron

A mesophilic sulphate-reducing micro-organism, able to grow chemolithoautotrophically with H2/CO2 (20 : 80) and with elemental iron as a sole electron donor, was isolated from a consortium capable of degrading long-chain paraffins and designated strain DRH4T. Cells were oval shaped often with bright refractile cores and occurred singly or in pairs. The cells formed pili. Strain DRH4T could grow chemolithoautotrophically with H2/CO2 or elemental iron and chemoorganotrophically utilizing a number of organic substrates, such as fatty acids from formate to octanoate (C1–C8). Sulphate and thiosulphate served as terminal electron acceptors, but sulphite and nitrate did not. Optimal growth was observed from 37 to 40 °C and pH from 6.5 to 7.2. Strain DRH4T did not require NaCl for growth and could proliferate under a broad range of salinities from freshwater (1 g l−1 NaCl) to seawater (27 g l−1 NaCl) conditions. The genomic DNA G+C content was 54.46 mol %. Based on 16S rRNA gene sequence analysis. strain DRH4T was distinct from previously described Deltaproteobacteria species exhibiting the closest affiliation to Desulforhabdus amnigena ASRB1T, Syntrophobacterium sulfatireducens TB8106T and Desulfovirga adipica 12016T with 93.35, 93.42 and 92.85 % similarity, respectively. Strain DRH4T showed significant physiological differences with the aforementioned organisms. Based on physiological differences and phylogenetic comparisons, we propose to classify DRH4T as the type strain (=DSM 113 455T=JCM 39 248T) of a novel species of a new genus with the name Desulfoferrobacter suflitae gen. nov., sp. nov.

Desulfovibrio vulgaris as a model microbe for the study of corrosion under sulfate-reducing conditions

Corrosion of iron-containing metals under sulfate-reducing conditions is an economically important problem. Microbial strains now known as Desulfovibrio vulgaris served as the model microbes in many of the foundational studies that developed existing models for the corrosion of iron-containing metals under sulfate-reducing conditions. Proposed mechanisms for corrosion by D. vulgaris include: (1) H2 consumption to accelerate the oxidation of Fe0 coupled to the reduction of protons to H2; (2) production of sulfide that combines with ferrous iron to form iron sulfide coatings that promote H2 production; (3) moribund cells release hydrogenases that catalyze Fe0 oxidation with the production of H2; (4) direct electron transfer from Fe0 to cells; and (5) flavins serving as an electron shuttle for electron transfer between Fe0 and cells. The demonstrated possibility of conducting transcriptomic and proteomic analysis of cells growing on metal surfaces suggests that similar studies on D. vulgaris corrosion biofilms can aid in identifying proteins that play an important role in corrosion. Tools for making targeted gene deletions in D. vulgaris are available for functional genetic studies. These approaches, coupled with instrumentation for the detection of low concentrations of H2, and proven techniques for evaluating putative electron shuttle function, are expected to make it possible to determine which of the proposed mechanisms for D. vulgaris corrosion are most important.