Ultrasound-assisted extraction of protein from Bombay locusts and its impact on functional and antioxidative properties

High-intensity ultrasound-assisted alkaline extraction of soy protein: Optimization, modeling, physicochemical and functional properties

This study examined the effect of high-intensity ultrasound-assisted alkaline extraction (HUAE) on the extraction yield and the physicochemical and functional properties of soy protein (SP) using the two-pot multivariate method for the first time. Plackett-Burman Design (PBD) coupled with Response Surface Methodology (RSM) was systematically utilized to select and subsequently optimize the HUAE parameters. Based on PBD results, the significant extraction factors were liquid to solid ratio (LSR), temperature, ultrasonic amplitude, and extraction time. The optimum conditions for the maximal extraction yield and minimal energy consumption were 50:1 mL/g LSR, 50 °C, 48 % ultrasonic amplitude, and 10 min extraction time. At optimum conditions, the extraction yield (35.28 %) was significantly improved compared to traditional extraction (26.39 %). Besides, HUAE resulted in modification of the protein secondary and tertiary structures due to the unfolding of protein molecules and the exposure of hydrophobic groups or regions as shown by FTIR spectroscopy, free sulfhydryl analysis, and scanning electron microscopy. These structural changes led to decreased solubility and emulsifying activity but improved emulsion stabilization and antioxidant properties. With future development, HUAE could potentially produce soy protein for targeted applications, broadening its utilization and meeting the need for more sustainable alternative processing.

Preparation and identification of novel antioxidant peptides from collagen hydrolysate of sheep hoof assisted by ultrasound

In this study, different ultrasound-assisted modes [ultrasonic simultaneous (US) and ultrasonic preconditioning (UP)] of synergistic enzymatic hydrolysis were used to prepare bioactive peptides of sheep hoof collagen. The 2, 2-diphenyl - 1-picrylhydrazyl (DPPH) radical scavenging activity, 2,2 '-Azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging capacity and metal chelating capacity of sheep's hoof collagen antioxidant peptides (SCPs) (at 1 mg/mL) prepared at 20 min of treatment in US treatment mode (US-20) were 48.56 ± 0.68 %, 51.97 ± 1.15 % and 65.58 ± 1.36 %, respectively, which were higher compared with the control and UP groups. Using LC-MS/MS analysis, 9336, 11,527, and 11,909 peptide sequences were identified from collagen hydrolysate by C, UP-20, and US-20, respectively. The peptides ACEDAPPSAAHFR and FGFEVGPACFLG with high bioactivity were screened using computer analysis. Molecular docking results revealed that hydrogen bonding and hydrophobic interactions between the two peptide sequences with DPPH and ABTS radicals may be responsible for their antioxidant properties. Therefore, we have optimized the extraction of bioactive peptides from sheep hoof collagen using ultrasound-assisted enzymatic hydrolysis, which is helpful for the high-value utilisation of sheep hoof by-products and the extraction of foodborne antioxidant peptides.

Effect of fermentation, malting and ultrasonication on sorghum, mopane worm and Moringa oleifera: improvement in their nutritional, techno-functional and health promoting properties

Background

Food processing offers various benefits that contribute to food nutrition, food security and convenience. This study investigated the effect of three different processes (fermentation, malting and ultrasonication) on the nutritional, techno-functional and health-promoting properties of sorghum, mopane worm and Moringa oleifera.

Methods

The fermented and malted flours were prepared at 35°C for 48 h, and for ultrasonication, samples were subjected to 10 min at 4°C with amplitudes of 40-70 Hz. The biochemical, nutritional quality and techno-functional properties of the obtained flours were analysed using standard procedures.

Results

Fermentation resulted in significantly lower pH and higher titratable acidity in sorghum and mopane worm (4.32 and 4.76; 0.24 and 0.69% lactic acid, respectively), and malting resulted in higher total phenolic content and total flavonoid content in sorghum (3.23 mg GAE/g and 3.05 mg QE/g). Ultrasonication resulted in higher protein and fibre in raw sorghum flour (13.38 and 4.53%) and mopane worm (56.24 and 11.74%) while raw moringa had the highest protein (30.68%). Biomodification by fermentation in sorghum led to higher water and oil holding capacity and increased dispersibility in the ultrasonicated samples. Ultrasonication of mopane worms led to higher water holding capacity, oil holding capacity and dispersibility. Lightness was found to be significantly higher in the fermented samples in sorghum and mopane worm. Raw moringa had the greatest lightness compared to the ultrasonicated moringa. Moringa had the most redness and browning index among all samples.

Conclusion

In this study, all the investigated processes were found to have caused variations in flours' biochemical, nutritional and techno-functional properties. Ultrasonication process was noteworthy to be the most efficient to preserve the nutritional value in sorghum, mopane worm and M. oleifera flours.

Response surface methodology guided approach for optimization of protein isolate from Faba bean. Part 1/2

Ultrasound-assisted extraction (UAE) was evaluated as a green procedure to produce faba beans protein isolates from faba beans. Magnetic stirring was performed as conventional extraction. A three-level five-factor Box-Behnken Design (BBD) was applied to obtain the optimal UAE conditions to concurrently maximize extraction yield and protein content. The response surface methodology (RSM) showed a quadratic curvature for extraction yield and protein. The optimal extraction conditions were determined as: Power of 123 W, solute/solvent ratio of 0.06 (1:15 g/mL), sonication time of 41 min, and total volume of 623 mL with a desirability value of 0.82. Under these conditions, the extraction yield of 19. 75 ± 0.87 % (Protein yield of 67.84 %) and protein content of 92.87 ± 0.53 % were obtained for optimum ultrasound extraction. Control samples using magnetic stirring under similar conditions without ultrasound treatment showed an extraction yield of 16.41 ± 0.02 % (Protein yield of 54.65 %) and a protein content of 89. 88 ± 0.40 %. This shows that BBD can effectively be used to optimize the extraction of proteins from faba beans using optimal extraction conditions, resulting in a higher extraction yield and protein purity.

Locust protein hydrolysates have the potential to enhance the storage stability of cheese

The study evaluated the efficacy of locust protein hydrolysates (LoPHs) to enhance the quality of Cheddar cheese (ChCh) during storage. The locust protein (LoP) was pre-treated [microwave (Mic) or ultrasonication (Ult) or no treatment (Not)] before hydrolysis using alcalase enzyme (3% w/w). The ChCh samples containing LoPHs at the maximum level of 1.5% were evaluated for quality for 3 months (4 ± 1 °C) and subjected to gastrointestinal simulation. Both pre-treatments (Mic and Ult) significantly (P < 0.05) enhanced the antimicrobial and antioxidant activities of the LoPHs (Ult > Mic > Not). The ChCh samples with LoPHs exhibited significantly (P < 0.05) lower means for lipid oxidation (TBARS and free fatty acids), protein oxidation (total-carbonyl content) and microbial counts (psychrophilic, total plate and yeast/moulds) during the storage. A positive effect was found on the sensory quality of ChCh samples after one month of storage. The gastrointestinal simulation improved the antioxidant capacity of the stored ChCh samples. LoPHs can be used as a novel bio-preservative for cheese.

Ultrasonication and microwave pre-treated locust protein hydrolysates enhanced the storage stability of meat emulsion

Locust protein hydrolysates (LoProHs) pre-processed with microwave and ultrasonication were developed and evaluated for their potential for enhancing the quality of the stored meat emulsion (MEmul). Locust protein (LoPro) samples pre-processed with ultrasonication (Ult) or microwave (Mic) or with no treatment (Not) were hydrolysed with alcalase enzyme (3%). The microwave pre-processed (Mic-LoProHs) and ultrasonicated (Ult-LoProHs) hydrolysates showed significantly (P < 0.05) higher antioxidant [FRAP (ferric reducing antioxidant power) and ABTS and DPPH radical scavenging activities] and antimicrobial [minimum inhibitory concentration (MIC) and inhibitory halos (mm)] potential. The MEmul samples incorporated with Mic-LoProHs and Ult-LoProHs at the maximum level of 1.5% exhibited significantly (P < 0.05) improved results for all the quality parameters such as antioxidant potential (FRAP, ABTS and DPPH), protein oxidation (total carbonyl content), lipid stability, and microbial quality during refrigerated storage (4 ± 1 °C) of two-weeks compared to the control MEmul without any LoProHs. A positive (P < 0.05) impact of the LoProHs was found on the sensory quality of MEmul samples after one week of storage. The digestion simulation improved (P < 0.05) the antioxidant potential of the MEmul samples.

Improving microbial and lipid oxidative stability of cheddar cheese using cricket protein hydrolysates pre-treated with microwave and ultrasonication

The study was carried out to investigate cricket protein hydrolysates' (CPH) potential to enhance the storage stability of cheddar cheese. The cricket protein (CP) samples pre-processed with microwave (T₁), ultrasonication (T₂) or without pre-treatment (T₀) were used for developing the CPH using alcalase enzyme (3%). Freeze-dried CPH were incorporated in the cheese samples (CPH-T₁, CPH-T₂ and CPH-T₀) at the maximum level of 1.5% and were analysed for quality during 3 months of storage (4 ± 1 °C) compared to the control samples without CPH. The pre-treatments significantly improved the antimicrobial and antioxidant potential of the CPH. The CPH exhibited a significant positive effect on antioxidant potential, lipid stability, protein oxidation, microbial growth, and sensory quality of the cheddar cheese during storage. Digestion simulation showed a significant positive impact on the antioxidant activity of the cheddar cheese. Our results indicate the potential of CPH to enhance the quality of fat-rich foods during storage.

Impact of cavitation on the structure and functional quality of extracted protein from food sources - An overview

Increasing protein demands directly require additional resources to those presently and recurrently available. Emerging green technologies have witnessed an escalating interest in "Cavitation Processing" (CP) to ensure a non-invasive, non-ionizing and non-polluting extraction. The main intent of this review is to present an integrated summary of cavitation extraction methods specifically applied to food protein sources. Along with a comparative assessment carried out for each type of cavitation model, protein extraction yield and implications on the extracted protein's structural and functional properties. The basic principle of cavitation is due to the pressure shift in the liquid flow within milliseconds. Hence, cavitation emerges similar to boiling; however, unlike boiling (temperature change), cavitation occurs due to pressure change. Characterization and classification of sample type is also a prime candidate when considering the applications of cavitation models in food processing. Generally, acoustic and hydrodynamic cavitation is applied in food applications including extraction, brewing, microbial cell disruption, dairy processing, emulsification, fermentation, waste processing, crystallisation, mass transfer and production of bioactive peptides. Micro structural studies indicate that shear stress causes disintegration of hydrogen bonds and Van der Waals interactions result in the unfolding of the protein's secondary and/or tertiary structures. A change in the structure is not targeted but rather holistic and affects the physicochemical, functional, and nutritional properties. Cavitation assisted extraction of protein is typically studied at a laboratory scale. This highlights limitations against the application at an industrial scale to obtain potential commercial gains.

Impact of Ultrasonication on African Oil Bean (Pentaclethra macrophylla Benth) Protein Extraction and Properties

African oil bean (Pentaclethra macrophylla Benth) is an underutilised edible oil seed that could represent a sustainable protein source. In this study, the impact of ultrasonication on the extraction efficiency and properties of protein from African oil bean (AOB) seeds was evaluated. The increase in the duration of extraction favoured the extraction of AOB proteins. This was observed by an increase in extraction yield from 24% to 42% (w/w) when the extraction time was increased from 15 min to 60 min. Desirable properties were observed in extracted AOB proteins; the amino acid profile of protein isolates revealed higher ratios of hydrophobic to hydrophilic amino acids compared to those of the defatted seeds, suggesting alterations in their functional properties. This was also supported by the higher proportion of hydrophobic amino acids and high surface hydrophobicity index value (3813) in AOB protein isolates. The foaming capacity of AOB proteins was above 200%, with an average foaming stability of 92%. The results indicate that AOB protein isolates can be considered promising food ingredients and could help stimulate the growth of the food industry in tropical Sub-Saharan regions where AOB seeds thrive.

Improvements in Visual Aspects and Chemical, Techno-Functional and Rheological Characteristics of Cricket Powder (Gryllus bimaculatus) by Solvent Treatment for Food Utilization

This study aimed to improve the visual aspects and chemical, techno-functional and rheological characteristics of Gryllus bimaculatus cricket powder through the use of different solvents, with the objective of using it as a protein source in food production. Four treatments (pH 5 aqueous solution, ethanol 20%, ethanol 99.5%, and hexane) were applied to the powder, and analyses were conducted to assess changes in the previously mentioned parameters. The results showed that the treatments led to an increase in protein concentration (from 55.4 to 72.5%) and a decrease in fat concentration (from 33.0 to 6.8%) in ethanol 99.5% treated powder, as well as a reduction in anti-nutritional compounds concentration, such as tannins (from 13.3 to 5.9 g/kg), in pH 5 treated powder, which is important for the nutritional value of the final product. The color of the powders was improved, being lighter after hexane and ethanol 99.5% treatments due to the removal of melanin with the defatting process. Flowability, water, and oil holding capacity were also improved in the defatted powders. All the results suggest that the main composition of the powder directly influences the analyzed parameters. These findings suggest that cricket powder treated with solvents can be used as a protein source in different food applications.

The Review of Cooking, Drying, and Green Extraction Methods on General Nutritional Properties of Mealworms and Locusts

The processing of edible insects as an alternative source of nutrition may be a key driver in the development of a sustainable food and feed system. This review will study two industrial types of insects-mealworms and locusts-and summarize evidence related to the impact of processing on their micro- and macronutritional characteristics. The focus will be on their potential use as food for human consumption as opposed to animal feed. Literature has indicated that these two insects have the potential to provide protein and fat qualities comparable to or better than traditional mammalian sources. For example, mealworms-the larval form of the yellow mealworm beetlepossess a higher fat content, while adult locusts are rich in fibers, especially chitin. However, due to the different matrix and nutrient compositions, the processing of mealworms or locusts at a commercial scale needs to be tailored to minimize nutritional loss and maximize cost efficiency. The stages of preprocessing, cooking, drying, and extraction are the most critical control points for nutritional preservation. Thermal cooking applications such as microwave technology have demonstrated promising results, but the generation of heat may contribute to a certain nutritional loss. In an industrial context, drying using freeze dry is the preferred choice due to its uniformity, but it can be costly while increasing lipid peroxidation. During the extraction of nutrients, the use of green emerging technologies such as high hydrostatic pressure, pulsed electric field, and ultrasound may provide an alternative method to enhance nutrient preservation.

Graphical Abstract

Overcoming obstacles in insect utilization

Edible insects have long been part of human diets in some countries, and they are expected to become an important alternative food source because of their nutritional value and favorable environmental impact. However, insects’ consumption safety and consumer acceptance are still significant barriers to market positioning, mainly in Western regions. Therefore, several processing technologies have been applied to develop insect-based food products and derivatives to increase consumer safety, shelf-life, and sensorial properties, including appearance. The processing pathway for insects as food might then be focused on eliminating such concerns. However, even though there is enough information related to processing techniques for edible insects, the use of the treated material has been limited as a substitute rather than a main constituted nutritional component. Moreover, there is little information about novel technologies and uses of insect derivatives compared to the minimally processed insect, as in the case of flours. This review presents the food safety (biological and chemical hazards) and cultural aspects of difficulties of eating insects and the role of processing raw material, extraction of insect derivatives (lipids and proteins), and food prototypes development on safety and consumer acceptance.

Graphical abstract

Impact of ultrasound processing on alternative protein systems: Protein extraction, nutritional effects and associated challenges

Proteins from alternative sources including terrestrial and aquatic plants, microbes and insects are being increasingly explored to combat the dietary, environmental and ethical challenges linked primarily to conventional sources of protein, mainly meat and dairy proteins. Ultrasound (US) technologies have emerged as a clean, green and efficient methods for the extraction of proteins from alternative sources compared to conventional methods. However, the application of US can also lead to modifications of the proteins extracted from alternative sources, including changes in their nutritional quality (protein content, amino acid composition, protein digestibility, anti-nutritional factors) and allergenicity, as well as damage of the compounds associated with an increased degradation resulting from extreme US processing conditions. This work aims to summarise the main advances in US equipment currently available to date, including the main US parameters and their effects on the extraction of protein from alternative sources, as well as the studies available on the effects of US processing on the nutritional value, allergenicity and degradation damage of these alternative protein ingredients. The main research gaps identified in this work and future challenges associated to the widespread application of US and their scale-up to industry operations are also covered in detail.

Ultrasound-Assisted Extraction of Artocarpus heterophyllus L. Leaf Protein Concentrate: Solubility, Foaming, Emulsifying, and Antioxidant Properties of Protein Hydrolysates

The impact of ultrasound-assisted extraction (UAE) was evaluated on the functionality of jackfruit leaf protein hydrolysates. Leaf protein concentrate was obtained by ultrasound (LPCU) and conventional extractions by maceration (LPCM). LPCM and LPCU were hydrolyzed with pancreatin (180 min), and hydrolysates by maceration (HM) and ultrasound (HU) were obtained. The composition of amino acids, techno-functional (solubility, foaming, and emulsifying properties), and antioxidant properties of the hydrolysates were evaluated. A higher amount of essential amino acids was found in HU, while HM showed a higher content of hydrophobic amino acids. LPCs exhibited low solubility (0.97–2.89%). However, HM (67.8 ± 0.98) and HU (77.39 ± 0.43) reached maximum solubility at pH 6.0. The foaming and emulsifying properties of the hydrolysates were improved when LPC was obtained by UAE. The IC50 of LPCs could not be quantified. However, HU (0.29 ± 0.01 mg/mL) showed lower IC50 than HM (0.32 ± 0.01 mg/mL). The results reflect that the extraction method had a significant (p < 0.05) effect on the functionality of protein hydrolysates. The UAE is a suitable method for enhancing of quality, techno-functionality, and antioxidant properties of LPC.

Impact of different ultrasound-assisted processes for preparation of collagen hydrolysates from Asian bullfrog skin on characteristics and antioxidative properties

This study focused on impact of ultrasound-assisted process (UAP) at pre-treatment (UP) and simultaneous treatment (US) during papain hydrolysis for preparing collagen hydrolysate (CH) from Asian bullfrog skin. Ultrasonication times were varied (10, 20, 30 min), and CH prepared using papain hydrolysis without UAP was used as control. Different UAPs provided CH with various hydroxyproline contents, α-amino group contents, surface hydrophobicities, and antioxidative activities. UP at 20 min (UP-20) and US at 30 min (US-30) provided highly antioxidative CHs, which were selected for further studies on their Oxygen reactive absorbance capacity (ORAC) and molecular characteristics. CHs from UP-20 and US-30 had higher ORAC than that of control group (p ≤ 0.05). Slight difference in amino acid composition was detected between samples. Based on these results, molecular characteristic styles, molecular weight profile, antioxidative peptide content, and secondary structure of each sample were obtained. These results indicate that UP and US used varied enzymatic hydrolysis patterns and modified molecular conformation of CH, resulting in enhanced antioxidative activity. Therefore, different UAPs as UP and US could be effectively used in preparation of CH using papain hydrolysis from Asian bullfrog skin, which could improve production process efficiency by enhancing their bioactivity, particularly antioxidative activity.

Dispersive solid phase microextraction based on magnesium oxide nanoparticles for preconcentration of auramine O and methylene blue from water samples

In this study, we investigated the process of preconcentrate and determine trace amounts of Auramine O (AO) and methylene blue (MB) dyes in environmental water samples. For this purpose, the ultrasound-assisted dispersive-magnetic nanocomposites-solid-phase microextraction (UA-DMNSPME) method was performed to extract AO and MB from aqueous samples by applying magnesium oxide nanoparticles (MgO-NPs). The proposed technique is low-cost, facile, fast, and compatible with many existing instrumental methods. Parameters affecting the extraction of AO and MB were optimized using response surface methodology (RSM). Short extraction time, low experimental tests, low consumption of organic solvent, low limits of detection (LOD), and high preconcentration factor (PF) was the advantages of method. The PF was 44.5, and LOD for AO and MB was 0.33 ng mL⁻¹ and 1.66 ng mL⁻¹, respectively. The linear range of this method for AO and MB were 1–1000 ng mL⁻¹ and 5–2000 ng mL⁻¹, respectively. In addition, the relative standard deviation (RSD; n = 5) of the mentioned analytes was between 2.9% and 3.1%. The adsorption–desorption studies showed that the efficiency of adsorbent extraction had not declined significantly up to 6 recycling runs, and the adsorbent could be used several times. The interference studies revealed that the presence of different ions did not interfere substantially with the extraction and determination of AO and MB. Therefore, UA-DMNSPME-UV/Vis method can be proposed as an efficient method for preconcentration and extraction of AO and MB from water and wastewater samples.

Edible Insects’ Transformation for Feed and Food Uses: An Overview of Current Insights and Future Developments in the Field

The integration of insect-derived extracts in feed and food products has become a field of growing interest in recent years. In this review, we collect different studies carried out on edible insects’ transformation processes and focus on the various treatment operations, extraction technologies, and solvents used in different processing steps. We include an overview of current insights into the different steps of the transformation process: insect reception, killing methods, pretreatments, storage, delipidation, protein extraction, as well as chitin and chitosan extraction. Finally, we reflect on the most important future challenges of this sector.

Characterization of cooked meat models using grasshopper (Sphenarium purpurascens) soluble protein extracted by alkalisation and ultrasound as meat-extender

The most abundant Orthoptera in Mexico is a small grasshopper (Sphenarium purpurascens) which is considered a food source with increased nutritional value due to its high protein content. Insect proteins have gained relevance because of their high potential as gelling, texturing, and extender agents in the food industry. The objective of this study was to evaluate the effect of substituting meat with a soluble protein extract from grasshopper obtained by alkalisation or alkalisation-piezoelectric ultrasound, on the techno-functional, physicochemical, and sensory characteristics of cooked meat models (sausages). The soluble protein was extracted in NaHCO₃ pH 8 and a piezoelectric ultrasound 5-mm sonotrode at 20 kHz with 99% amplitude. Different formulations with meat substitution: 0%, 5%, 10%, and 15% were prepared and characterised for their rheological behaviour, emulsion stability, weight loss by cooking, total protein content, colour, and texture. Sensory evaluation was conducted with consumers using a test involving check-all-that-apply and overall liking. The alkalisation-piezoelectric ultrasound method improved the solubility and the techno-functional properties of the soluble grasshopper protein when applied in sausages at maximum levels of 10% meat substitution. The sensory evaluation indicated that the formulation with 5% meat substitution exhibited the same acceptability as the control sample. Given these results, the soluble protein treated with alkalisation and piezoelectric ultrasound could be used as an extender in meat products.

Latest Advances in Protein-Recovery Technologies from Agricultural Waste

In recent years, downstream bioprocessing industries are venturing into less tedious, simple, and high-efficiency separation by implementing advanced purification and extraction methods. This review discusses the separation of proteins, with the main focus on amylase as an enzyme from agricultural waste using conventional and advanced techniques of extraction and purification via a liquid biphasic system (LBS). In comparison to other methods, such as membrane extraction, precipitation, ultrasonication, and chromatography, the LBS stands out as an efficient, cost-effective, and adaptable developing method for protein recovery. The two-phase separation method can be water-soluble polymers, or polymer and salt, or alcohol and salt, which is a simpler and lower-cost method that can be used at a larger purification scale. The comparison of different approaches in LBS for amylase purification from agricultural waste is also included. Current technology has evolved from a simple LBS into microwave-assisted LBS, liquid biphasic flotation (LBF), thermoseparation (TMP), three-phase partitioning (TPP), ultrasound-assisted LBS, and electrically assisted LBS. pH, time, temperature, and concentration are some of the significant research parameters considered in the review of advanced techniques.

Emergent Proteins-Based Structures-Prospects towards Sustainable Nutrition and Functionality

The increased pressure over soils imposed by the need for agricultural expansion and food production requires development of sustainable and smart strategies for the efficient use of resources and food nutrients. In accordance with worldwide transformative polices, it is crucial to design sustainable systems for food production aimed at reducing environmental impact, contributing to biodiversity preservation, and leveraging a bioeconomy that supports circular byproduct management. Research on the use of emergent protein sources to develop value-added foods and biomaterials is in its infancy. This review intends to summarize recent research dealing with technological functionality of underused protein fractions, recovered from microbial biomass and food waste sources, addressing their potential applications but also bottlenecks. Protein-based materials from dairy byproducts and microalgae biomass gather promising prospects of use related to their techno-functional properties. However, a balance between yield and functionality is needed to turn this approach profitable on an industrial scale basis. In this context, downstream processing should be strategically used and properly integrated. Food solutions based on microbial proteins will expand in forthcoming years, bringing the opportunity to finetune development of novel protein-based biomaterials.