Superabsorbent cellulose-based hydrogels cross-liked with borax

Multifunctional pH-responsive hydrogel dressings based on carboxymethyl chitosan: Synthesis, characterization fostering the wound healing

Antibiotic abuse is increasing the present rate of drug-resistant bacterial wound infections, producing a significant healthcare burden globally. Herein, we prepared a pH-responsive CMCS/PVP/TA (CPT) multifunctional hydrogel dressing by embedding the natural plant extract TA as a nonantibiotic and cross-linking agent in carboxymethyl chitosan (CMCS) and polyvinylpyrrolidone (PVP) to prompt wound healing. The CPT hydrogel demonstrated excellent self-healing, self-adaptive, and adhesion properties to match different wound requirements. Importantly, this hydrogel showed pH sensitivity and exhibited good activity against resistant bacteria and antioxidant activity by releasing TA in case of bacterial infection (alkaline). Furthermore, the CPT hydrogel exhibited coagulant ability and could rapidly stop bleeding within 30 s. The biocompatible hydrogel effectively accelerated wound healing in a full-thickness skin defect model by thickening granulation tissue, increasing collagen deposition, vascular proliferation, and M2-type macrophage polarization. In conclusion, this study demonstrates that multifunctional CPT hydrogel offers a candidate material with potential applications for infected skin wound healing.

Dissolving-co-catalytic strategy for the preparation of flexible and wet-stable cellulose membrane towards biodegradable packaging

In the realization of the goal of circular economy, cellulose as one of sustainable biomass resources, have attracted much attention because of their abundant sources, biodegradability and renewability. However, the mechanical and waterproof performance of cellulose-based materials are usually not satisfying, which limits their high-value utilization. In this study, cellulose membrane with high-performance from the aspects of mechanical properties, water-resistance ability, oxygen barrier capacity and biodegradability, was prepared from bleached hardwood pulp (HBKP) in a AlCl3/ZnCl2/H2O solution. The AlCl3/ZnCl2/H2O acted as both solvent and catalyst to dissolve cellulose and facilitate the chemical crosslinking of epichlorohydrin (EPI) with cellulose, thus improved the overall performance of the obtained cellulose membrane. The addition sequence, amount and crosslinking time of EPI during chemical crosslinking had important effects on the properties of the membranes. When 7 wt% EPI was crosslinked for 24 h, the tensile stress reached 133 MPa and the strain reached 17 %. Moreover, the membrane had excellent oxygen insulation down to (1.1 ± 0.31) × 10-4 cm3/m2·d·Pa, and good water-resistance ability, no obvious swelling behavior after 450 days of immersion in distilled water. Furthermore, the membrane could be degraded by microorganisms in about 20 days. This cellulose-based membrane offers a sustainable and biodegradable packaging material.

A Top-Down Approach to the Fabrication of Flame-Retardant Wood Aerogel with In Situ-Synthesized Borax and Zinc Borate

In this study, a top-down approach was employed for the fabrication of flame-retardant wood aerogels. The process involved the removal of lignin and the removal of hemicellulose utilizing NaOH concomitantly with the incorporation of ZnO and urea. Subsequently, an in situ reaction with boric acid was conducted to prepare flame-retardant wood aerogels. The morphology, chemical composition, thermal stability, and flame retardancy of the samples were studied. The results show that the NaOH treatment transformed the wood into a layered structure, and flame-retardant particles were uniformly distributed on the surface of the aerogel. The peak heat release rate (PHRR) and total heat release (THR) of the flame-retardant aerogel were significantly reduced compared with the control samples. Meanwhile, its vertical burning test (UL-94) rating reached the V-0 level, and the Limiting Oxygen Index (LOI) could exceed 90%. The flame-retardant wood aerogel exhibited excellent flame retardancy and self-extinguishing properties.

Exploring Applications and Preparation Techniques for Cellulose Hydrogels: A Comprehensive Review

Cellulose hydrogels, formed either through physical or chemical cross-linking into a three-dimensional network from cellulose or its derivatives, are renowned for their exceptional water absorption capacities and biocompatibility. Rising demands for sustainable materials have spurred interest in cellulose hydrogels, attributed to their abundant supply, biodegradability, and non-toxic nature. These properties highlight their extensive potential across various sectors including biomedicine, the food industry, and environmental protection. Cellulose hydrogels are particularly advantageous in applications such as drug delivery, wound dressing, and water treatment. Recent large-scale studies have advanced our understanding of cellulose preparation and its applications. This review delves into the fundamental concepts, preparation techniques, and current applications of cellulose hydrogels in diverse fields. It also discusses the latest advances in nano-lignin-based hydrogels, providing a comprehensive overview of this promising material and offering insights and guidance for future research and development.

Cellulose-Based Hydrogels for Wastewater Treatment: A Focus on Metal Ions Removal

The rapid worldwide industrial growth in recent years has made water contamination by heavy metals a problem that requires an immediate solution. Several strategies have been proposed for the decontamination of wastewater in terms of heavy metal ions. Among these, methods utilizing adsorbent materials are preferred due to their cost-effectiveness, simplicity, effectiveness, and scalability for treating large volumes of contaminated water. In this context, heavy metal removal by hydrogels based on naturally occurring polymers is an attractive approach for industrial wastewater remediation as they offer significant advantages, such as an optimal safety profile, good biodegradability, and simple and low-cost procedures for their preparation. Hydrogels have the ability to absorb significant volumes of water, allowing for the effective removal of the dissolved pollutants. Furthermore, they can undergo surface chemical modifications which can further improve their ability to retain different environmental pollutants. This review aims to summarize recent advances in the application of hydrogels in the treatment of heavy metal-contaminated wastewater, particularly focusing on hydrogels based on cellulose and cellulose derivatives. The reported studies highlight how the adsorption properties of these materials can be widely modified, with a wide range of adsorption capacity for different heavy metal ions varying between 2.3 and 2240 mg/g. The possibility of developing new hydrogels with improved sorption performances is also discussed in the review, with the aim of improving their effective application in real scenarios, indicating future directions in the field.

Injectable plant-derived polysaccharide hydrogels with intrinsic antioxidant bioactivity accelerate wound healing by promoting epithelialization and angiogenesis

Skin wound healing is a complex and dynamic process involving hemostasis, inflammatory response, cell proliferation and migration, and angiogenesis. Currently used wound dressings remain unsatisfactory in the clinic due to the lack of adjustable mechanical property for injection operation and bioactivity for accelerating wound healing. In this work, an "all-sugar" hydrogel dressing is developed based on dynamic borate bonding network between the hydroxyl groups of okra polysaccharide (OP) and xyloglucan (XG). Benefiting from the reversible crosslinking network, the resulting composite XG/OP hydrogels exhibited good shear-thinning and fast self-healing properties, which is suitable to be injected at wound beds and filled into irregular injured site. Besides, the proposed XG/OP hydrogels showed efficient antioxidant capacity by scavenging DPPH activity of 73.9 %. In vivo experiments demonstrated that XG/OP hydrogels performed hemostasis and accelerated wound healing with reduced inflammation, enhanced collagen deposition and angiogenesis. This plant-derived dynamic hydrogel offers a facile and effective approach for wound management and has great potential for clinical translation in feature.

Industrializable approach for preparing hydrogel microneedles and their application in melanoma treatment

Microneedles (MNs) technology has been studied in transdermal drug delivery for more than 20 years with hundreds of clinical trials conducted. However, there are currently no commercially available MNs in medicine due to challenges in materials safety, cost-effective fabrication, and large-scale manufacturing. Herein, an approach for rapid and green fabrication of hydrogel microneedles (HMNs) based on infrared irradiation process was proposed for the first time. The optimized formulation consisted of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP), which acted as cross-linked materials and pore-forming agents, respectively. The manufacturing method involved placing MNs patches under infrared irradiation at 70 °C for 2 min and annealing to obtain HMNs with excellent swelling behavior, mechanical strength, and biocompatibility. When model drugs azelaic acid (AZA) and matrine (MAT) were loaded into HMNs systems, the chemical stability of MAT was significantly improved. Ex vivo transdermal delivery experiments indicated that HMNs could achieve synchronous release of AZA and MAT, and the 24-hour percutaneous permeability rates of both drugs were 73.09 ± 0.48 % and 71.56 ± 1.23 %, respectively. In-vivo pharmacokinetic studies, HMNs administration presented dose-dependent stable blood drug concentrations for both drugs. Additionally, prominent anti-tumor efficacy and biosecurity were observed in the drug-loaded HMNs group in the pharmacodynamic evaluation. In summary, the efficient, convenient, and low-cost fabrication method based on infrared irradiation offers the possibility of mass production of drug-loaded HMNs, showing potential for industrial manufacturing development.

Advancements in Cellulose-Based Superabsorbent Hydrogels: Sustainable Solutions across Industries

The development of superabsorbent hydrogels is experiencing a transformative era across industries. While traditional synthetic hydrogels have found broad utility, their non-biodegradable nature has raised environmental concerns, driving the search for eco-friendlier alternatives. Cellulose-based superabsorbents, derived from sustainable sources, are gaining prominence. Innovations include biodegradable polymer hydrogels, natural cellulose-chitosan variants, and cassava starch-based alternatives. These materials are reshaping agriculture by enhancing soil fertility and water retention, serving as potent hemostatic agents in medicine, contributing to pollution control, and providing eco-friendly construction materials. Cellulose-based hydrogels also offer promise in drug delivery and hygiene products. Advanced characterization techniques aid in optimizing their properties, while the shift towards circular economy practices further highlights sustainability. This manuscript provides a comprehensive overview of these advancements, highlighting their diverse applications and environmental benefits.

Nanocellulose-Based Ecofriendly Nanocomposite for Effective Wastewater Remediation: A Study on Its Process Optimization, Improved Swelling, Adsorption, and Thermal and Mechanical Behavior

A nanocellulose (NC)-based cross-linked adsorbent has been employed herein for the removal of dye pollutants (e.g., methylene blue) from the textile industry. The synthesized hydrogel was optimized to achieve the best concentrations of the adsorbent constituents, i.e., 1.55% guar gum, 1.46% NC, and 0.84% borax for achieving the maximum swelling index (SI, 3741.42%) and higher adsorption capacity (qe, 24.05 mg g-1). 98.8% of dye qe was achieved at optimal conditions of pH 8 within 30 min at 30 °C. Adsorption isotherms and kinetics investigations showed good correlation with the Freundlich adsorption isotherm model (R2 > 0.9889; ΔG° = -4.71; ΔH° = -12.30; ΔS° = -0.025) as well as the pseudo-second-order kinetics model, indicating multilayered and intricate adsorption mechanisms for dye removal. The study of thermodynamic parameters confirmed the exothermic nature of the adsorption process. The adsorption-desorption study of the resulting hydrogel exhibited 64.58% dye removal efficiency even after 4 consecutive cycles of reuse. Further, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction analysis revealed the surface morphology, functional moieties, thermal behavior, and crystallinity pattern of the hydrogel. Rheological analysis demonstrated pseudoplastic flow and improved mechanical behavior for the hydrogel. The current study found that the synthesized adsorbent with a higher SI and qe has a noticeable potential for the removal of dye pollutants from wastewater.

Commercial hydrogel product for drug delivery based on route of administration

Hydrogels are hydrophilic, three-dimensional, cross-linked polymers that absorb significant amounts of biological fluids or water. Hydrogels possess several favorable properties, including flexibility, stimulus-responsiveness, versatility, and structural composition. They can be categorized according to their sources, synthesis route, response to stimulus, and application. Controlling the cross-link density matrix and the hydrogels' attraction to water while they're swelling makes it easy to change their porous structure, which makes them ideal for drug delivery. Hydrogel in drug delivery can be achieved by various routes involving injectable, oral, buccal, vaginal, ocular, and transdermal administration routes. The hydrogel market is expected to grow from its 2019 valuation of USD 22.1 billion to USD 31.4 billion by 2027. Commercial hydrogels are helpful for various drug delivery applications, such as transdermal patches with controlled release characteristics, stimuli-responsive hydrogels for oral administration, and localized delivery via parenteral means. Here, we are mainly focused on the commercial hydrogel products used for drug delivery based on the described route of administration.

Crosslinking of Epoxidized Natural Rubber with Borax for Self-Healing and Self-Repairing Properties: pH Dependence

Epoxidized natural rubber (ENR) crosslinked using borax, which exhibits self-healing and self-repairing properties, is successfully developed. The crosslink formation of ENR by using borax under neutral and alkaline conditions is investigated. Fourier transform infrared spectroscopy (FTIR) shows that the borate-ester bond is formed in ENR prepared under both neutral and alkaline conditions, whereas boron nuclear magnetic resonance (11 B-NMR) results exhibit that the ENR prepared under alkaline conditions more actively forms crosslink networks with borax. Moreover, the crosslink density and gel content increase significantly with the presence of borax in alkaline conditions. The crosslink density and gel content of ENR with 10 phr borax are higher by 155% and 36%, respectively, than those of neat ENR. Furthermore, the formation of the crosslinking ENR by borax enhances self-healing and self-repairing properties. The healing efficiency significantly increases from 1.09% to 85.90%, when ENR is developed under alkaline conditions with 30 phr borax. These results represent the first successful demonstration of the efficient use of borax as a crosslinker in ENR, which exhibits its promising self-healing and self-repairing properties under atmospheric conditions without the need for external stimuli. The ENR prepared in this work holds great promise for various self-healing rubber applications.

Cellulose Fabrics Functionalized with Sol-Gel Photocatalytic Coatings Based on Iron (III) Phthalocyanine Tetracarboxylic Acids-TiO2-Silica Hybrids

Photocatalytic coatings are difficult to obtain on textile materials because of the sometimes contradictory properties that must be achieved. In order to obtain a high efficiency of a photocatalytic effect, the metal-oxide semiconductor must be found in the vicinity of the coating-air interface in order to come into direct contact with the contaminant species and allow light radiation access to its surface. Another necessary condition is related to the properties of the covering textile material as well as to the stability of the xerogel films to light and wet treatments. In this sense, we proposed a solution based on hybrid silica films generated by sol-gel processes, coatings that contain as a photocatalyst TiO2 sensitized with tetracarboxylic acid of iron (III) phthalocyanine (FeTCPc). The coatings were made by the pad-dry-cure process, using in the composition a bifunctional anchoring agent (3-glycidoxipropyltrimethoxysilane, GLYMO), a crosslinking agent (sodium tetraborate, BORAX), and a catalyst (N-methylimidazole, MIM) for the polymerization of epoxy groups. The photodegradation experiments performed on methylene blue (MB), utilized as a model contaminant, using LED or xenon arc as light sources, showed that the treatment with BORAX improves the resistance of the coatings to wet treatments but worsens their photocatalytic performances.

Highly Flexible, Self-Bonding, Self-Healing, and Conductive Soft Pressure Sensors Based on Dicarboxylic Cellulose Nanofiber Hydrogels

Conductive hydrogels have gained a great deal of interest in the flexible electronics industry because of their remarkable inherent properties. However, a significant challenge remains for balancing hydrogel's conductivity, self-healing, and strength properties. Herein, double network ionic hydrogels were fabricated by concurrently introducing borax into dicarboxylic cellulose nanofiber (DCNFs) and polyacrylamide (PAM) hydrogels. The incorporation of borax provided a superabsorbent feature to the PAM/DCNF hydrogels (without borax) with the equilibrium water absorption rate increased from 552 to 1800% after 42 h. The compressive strength of the prepared hydrogel was 935 kPa compared to 132 kPa for the PAM hydrogel, with high cycling stability (stable after 1000 compression cycles with 50% strain). The hydrogel pressure sensor had a very sensitive response (gauge factor = 1.36) in the strain range from 10 to 80%, which made it possible to detect mechanical motion accurately and reliably. The developed hydrogels with high-performance, environmentally friendly properties are promising for use in future artificial skin and human-machine interface applications.

Progress in the Preparation of Stimulus-Responsive Cellulose Hydrogels and Their Application in Slow-Release Fertilizers

Agriculture is facing challenges such as water scarcity, low fertilizer utilization, food security and environmental sustainability. Therefore, the development of slow-release fertilizer (SRF) with controlled water retention and release is particularly important. Slow-release fertilizer hydrogel (SRFH) has a three-dimensional (3D) network structure combined with fertilizer processing, displaying excellent hydrophilicity, biocompatibility and controllability. Cellulose has abundant hydroxyl groups as well as outstanding biodegradability and special mechanical properties, which make it a potential candidate material for the fabrication of hydrogels. This work would analyze and discuss various methods for preparing stimulus-responsive cellulose hydrogels and their combinations with different fertilizers. Moreover, the application and release mechanism of stimulus-responsive cellulose hydrogels in SRF have been summarized as well. Finally, we would explore the potential issues of stimulus-responsive cellulose hydrogels serving as an SRF, propose reasonable solutions and give an outlook of the future research directions.

Highly Stretchable, Self-Healing, Injectable and pH Responsive Hydrogel from Multiple Hydrogen Bonding and Boron-Carbohydrate Interactions

A simple and cost-effective method for the fabrication of a safe, dual-responsive, highly stretchable, self-healing and injectable hydrogel is reported based on a combination of dynamic boronate ester bonds and hydrogen bonding interactions. The mechanical properties of the hydrogel are tunable by adjusting the molar ratios between sugar moieties on the polymer and borax. It was remarkable to note that the 2:1 ratio of sugar and borate ion significantly improves the mechanical strength of the hydrogel. The injectability, self-healing and stretchability properties of the hydrogel were also examined. In addition, the impact of the variation of the pH and the addition of free sugar responsiveness of the hydrogel was studied. High MRC-5 cell viability was noticed by the 3D live/dead assay after 24 h cell culture within the hydrogel scaffold. Hence, the developed hydrogels have desirable features that warrant their applications for drug delivery, scaffolds for cell and tissue engineering.

Polysaccharide hydrogel platforms as suitable carriers of liposomes and extracellular vesicles for dermal applications

Lipid-based nanocarriers have been extensively investigated for their application in drug delivery. Particularly, liposomes are now clinically established for treating various diseases such as fungal infections. In contrast, extracellular vesicles (EVs) - small cell-derived nanoparticles involved in cellular communication - have just recently sparked interest as drug carriers but their development is still at the preclinical level. To drive this development further, the methods and technologies exploited in the context of liposome research should be applied in the domain of EVs to facilitate and accelerate their clinical translation. One of the crucial steps for EV-based therapeutics is designing them as proper dosage forms for specific applications. This review offers a comprehensive overview of state-of-the-art polysaccharide-based hydrogel platforms designed for artificial and natural vesicles with application in drug delivery to the skin. We discuss their various physicochemical and biological properties and try to create a sound basis for the optimization of EV-embedded hydrogels as versatile therapeutic avenues.

Chitosan-based hydrogel system for efficient removal of Cu[II] and sustainable utilization of spent adsorbent as a catalyst for environmental applications

The growing requirement for clean potable water requires sustainable methods of eliminating heavy metal ions and other organic contaminants. Herein, we synthesized a novel dual-purpose magnetically separable chitosan-based hydrogel system (CSGO-R@IO) that can efficiently remove toxic Cu2+ pollutants from water. FT-IR, XRD, SEM-EDX, VSM, XPS analyses were used to characterize the synthesized hydrogel. The CSGO-R@IO hydrogel showed high swelling capacity (1036.06 %), prominent adsorption capacity for Cu2+ ions (119.5 mg/g), and good recyclability up to four cycles. The adsorption data of Cu+2 ions on hydrogel fitted better to the Langmuir isotherm model (R2 = 0.9942), indicating spontaneous monolayer adsorption of Cu2+ ions on a homogenous surface. The adsorption kinetic studies fitted better with the pseudo-second-order model (R2 = 0.9992), suggesting that the adsorption process was controlled by chemisorption. We also showed a sustainable way to convert harmful Cu2+ pollutants into valuable Cu nanoparticles for catalysis, and Cu nanoparticles loaded hydrogel (CSGO-R@IO/Cu) had high catalytic activity. Hence, building attractive multipurpose hydrogel systems will give us new ideas about how to design and use new adsorbents to clean water in real life. They will also help in recycle metals (copper and maybe others) to conserve resources.

Superabsorbent bacterial cellulose film produced from industrial residue of cashew apple juice processing

The industrial residue of cashew apple juice processing (MRC) was evaluated as an alternative medium for bacterial cellulose (BC) production by Komagataeibacter xylinus ATCC 53582 and Komagataeibacter xylinus ARS B42. The synthetic Hestrin-Schramm medium (MHS) was used as a control for growing and BC production. First, BC production was assessed after 4, 6, 8, 10, and 12 days under static culture. After 12 days of cultivation, K. xylinus ATCC 53582 produced the highest BC titer in MHS (3.1 g·L^-1) and MRC (3 g·L^-1), while significant productivity was attained at 6 days of fermentation. To understand the effect of culture medium and fermentation time on the properties of the obtained films, BC produced at 4, 6, or 8 days were submitted to infrared spectroscopy with Fourier transform, thermogravimetry, mechanical tests, water absorption capacity, scanning electron microscopy, degree of polymerization and X-ray diffraction. The properties of BC synthesized in MRC were identical to those of BC from MHS, according to structural, physical, and thermal studies. MRC, on the other hand, allows the production of BC with a high water absorption capacity when compared to MHS. Despite the lower titer (0.88 g·L^-1) achieved in MRC, the BC from K. xylinus ARS B42 presented a high thermal resistance and a remarkable absorption capacity (14664 %), suggesting that it might be used as a superabsorbent biomaterial.

Development of water-resistant paper using chitosan and plant-based wax extracted from banana leaves

On being exposed to water, cellulose paper swells and its mechanical properties become weak. In this study, natural wax with an average particle size of 12.3 μm extracted from banana leaves was mixed with chitosan to prepare coatings applied on paper surfaces. Chitosan efficiently dispersed banana leaf-extracted wax on paper surfaces. The mixed chitosan and wax coatings considerably influenced paper properties, including yellowness, whiteness, thickness, wettability, water and oil sorption, and mechanical properties. The coating induced hydrophobicity in the paper, resulting in a significant increase in the water contact angle from 65.1 ± 7.7° (uncoated paper) to 123.2 ± 2.1°, and a decrease in water absorption by ⁓64 % to 52.6 ± 1.9 %. The coated paper demonstrated an oil sorption capacity of 212.2 ± 2.8 %, which was ⁓43 % greater than that of the uncoated paper, and the tensile strength of the coated paper improved by 43 % under wet conditions compared to the uncoated paper. Additionally, a separation of oil in water was observed for the chitosan/wax coated paper. Based on these promising results, the paper coated with chitosan and wax could be used for direct-contact packaging applications.

Polymer Gels: Classification and Recent Developments in Biomedical Applications

Polymer gels are a valuable class of polymeric materials that have recently attracted significant interest due to the exceptional properties such as versatility, soft-structure, flexibility and stimuli-responsive, biodegradability, and biocompatibility. Based on their properties, polymer gels can be used in a wide range of applications: food industry, agriculture, biomedical, and biosensors. The utilization of polymer gels in different medical and industrial applications requires a better understanding of the formation process, the factors which affect the gel's stability, and the structure-rheological properties relationship. The present review aims to give an overview of the polymer gels, the classification of polymer gels' materials to highlight their important features, and the recent development in biomedical applications. Several perspectives on future advancement of polymer hydrogel are offered.

Antibacterial Aloe vera Based Biocompatible Hydrogel for Use in Dermatological Applications

The present research aims to describe a new methodology to obtain biocompatible hydrogels based on Aloe vera used for wound healing applications. The properties of two hydrogels (differing in Aloe vera concentration, AV5 and AV10) prepared by an all-green synthesis method from raw, natural, renewable and bioavailable materials such as salicylic acid, allantoin and xanthan gum were investigated. The morphology of the Aloe vera based hydrogel biomaterials was studied by SEM analysis. The rheological properties of the hydrogels, as well as their cell viability, biocompatibility and cytotoxicity, were determined. The antibacterial activity of Aloe vera based hydrogels was evaluated both on Gram-positive, Staphylococcus aureus and on Gram-negative, Pseudomonas aeruginosa strains. The obtained novel green Aloe vera based hydrogels showed good antibacterial properties. In vitro scratch assay demonstrated the capacity of both AV5 and AV10 hydrogels to accelerate cell proliferation and migration and induce closure of a wounded area. A corroboration of all morphological, rheological, cytocompatibility and cell viability results indicates that this Aloe vera based hydrogel may be suitable for wound healing applications.

Nanocellulose: A Fundamental Material for Science and Technology Applications

Recently, considerable interest has been focused on developing greener and biodegradable materials due to growing environmental concerns. Owing to their low cost, biodegradability, and good mechanical properties, plant fibers have substituted synthetic fibers in the preparation of composites. However, the poor interfacial adhesion due to the hydrophilic nature and high-water absorption limits the use of plant fibers as a reinforcing agent in polymer matrices. The hydrophilic nature of the plant fibers can be overcome by chemical treatments. Cellulose the most abundant natural polymer obtained from sources such as plants, wood, and bacteria has gained wider attention these days. Different methods, such as mechanical, chemical, and chemical treatments in combination with mechanical treatments, have been adopted by researchers for the extraction of cellulose from plants, bacteria, algae, etc. Cellulose nanocrystals (CNC), cellulose nanofibrils (CNF), and microcrystalline cellulose (MCC) have been extracted and used for different applications such as food packaging, water purification, drug delivery, and in composites. In this review, updated information on the methods of isolation of nanocellulose, classification, characterization, and application of nanocellulose has been highlighted. The characteristics and the current status of cellulose-based fiber-reinforced polymer composites in the industry have also been discussed in detail.