1
|
Kishore SC, Perumal S, Atchudan R, Edison TNJI, Sundramoorthy AK, Manoj D, Alagan M, Kumar RS, Almansour AI, Sangaraju S, Lee YR. Sustainable synthesis of spongy-like porous carbon for supercapacitive energy storage systems towards pollution control. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024:10.1007/s11356-024-33437-0. [PMID: 38684614 DOI: 10.1007/s11356-024-33437-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2024] [Accepted: 04/19/2024] [Indexed: 05/02/2024]
Abstract
In this study, the fruit of Terminalia chebula, commonly known as chebulic myrobalan, is used as the precursor for carbon for its application in supercapacitors. The Terminalia chebula biomass-derived sponge-like porous carbon (TC-SPC) is synthesized using a facile and economical method of pyrolysis. TC-SPC thus obtained is subjected to XRD, FESEM, TEM, HRTEM, XPS, Raman spectroscopy, ATR-FTIR, and nitrogen adsorption-desorption analyses for their structural and chemical composition. The examination revealed that TC-SPC has a crystalline nature and a mesoporous and microporous structure accompanied by a disordered carbon framework that is doped with heteroatoms such as nitrogen and sulfur. Electrochemical studies are performed on TC-SPC using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. TC-SPC contributed a maximum specific capacitance of 145 F g-1 obtained at 1 A g-1. The cyclic stability of TC-SPC is significant with 10,000 cycles, maintaining the capacitance retention value of 96%. The results demonstrated that by turning the fruit of Terminalia chebula into an opulent product, a supercapacitor, TC-SPC generated from biomass has proven to be a potential candidate for energy storage application.
Collapse
Affiliation(s)
| | - Suguna Perumal
- Department of Chemistry, Sejong University, Seoul, 143747, Republic of Korea
| | - Raji Atchudan
- School of Chemical Engineering, Yeungnam University, Gyeongsan, 38541, Republic of Korea.
| | | | - Ashok Kumar Sundramoorthy
- Department of Prosthodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Chennai, 600077, Tamil Nadu, India
| | - Devaraj Manoj
- Department of Chemistry, Karpagam Academy of Higher Education, Coimbatore, 641021, Tamil Nadu, India
- Centre for Material Chemistry, Karpagam Academy of Higher Education, Coimbatore, 641021, Tamil Nadu, India
| | - Muthulakshmi Alagan
- Department of Research and Innovation, Lincoln University College, 47301, Petaling Jaya, Malaysia
| | - Raju Suresh Kumar
- Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh, 11451, Saudi Arabia
| | | | - Sambasivam Sangaraju
- National Water and Energy Center, United Arab Emirates University, Al Ain, 15551, United Arab Emirates
| | - Yong Rok Lee
- School of Chemical Engineering, Yeungnam University, Gyeongsan, 38541, Republic of Korea
| |
Collapse
|
2
|
Guo Z, Liu G, Hao H, Yang J, Lei H, Shi X, Li W, Liu W. Polyaniline-graphene based composites electrode materials in supercapacitor: synthesis, performance and prospects. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2024; 36:263001. [PMID: 38537284 DOI: 10.1088/1361-648x/ad386f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/18/2023] [Accepted: 03/27/2024] [Indexed: 04/06/2024]
Abstract
Supercapacitors (SCs) have become one of the most popular energy-storage devices for high power density and fast charging/discharging capability. Polyaniline is a class of conductive polymer materials with ultra-high specific capacitance, and the excellent mechanical properties will play a key role in the research of flexible SCs. The synergistic effect between polyaniline and graphene is often used to overcome their respective inherent shortcomings, thus the high-performance polyaniline-graphene based nanocomposite electrode materials can be prepared. The development of graphene-polyaniline nanocomposites as electrode materials for SCs depends on their excellent microstructure design. However, it is still difficult to seek a balance between graphene performance and functionalization to improve the weak interfacial interaction between graphene and polyaniline. In this manuscript, the latest preparation methods, research progress and research results of graphene-polyaniline nanocomposites on SCs are reviewed, and the optimization of electrode structures and performances is discussed. Finally, the prospect of graphene-polyaniline composites is expected.
Collapse
Affiliation(s)
- Zefei Guo
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China
| | - Gengzheng Liu
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China
| | - Huilian Hao
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China
| | - Jun Yang
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China
| | - Huayu Lei
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China
| | - Xuerong Shi
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China
| | - Wenyao Li
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, People's Republic of China
| | - Wenfu Liu
- College of Energy Engineering, Huanghai University, 76 Kaiyuan Road, Zhumadian, People's Republic of China
| |
Collapse
|
3
|
Nicolaescu M, Vajda M, Lazau C, Orha C, Bandas C, Serban VA, Codrean C. Fabrication of Flexible Supercapacitor Electrode Materials by Chemical Oxidation of Iron-Based Amorphous Ribbons. MATERIALS (BASEL, SWITZERLAND) 2023; 16:2820. [PMID: 37049115 PMCID: PMC10096379 DOI: 10.3390/ma16072820] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/08/2023] [Revised: 03/23/2023] [Accepted: 03/30/2023] [Indexed: 06/19/2023]
Abstract
A flexible electrode constructed from Fe-based amorphous ribbons decorated with nanostructured iron oxides, representing the novelty of this research, was successfully achieved in one-step via a chemical oxidation method, using a low concentration of NaOH solution. The growth of metal oxides on a conductive substrate, which forms some metal/oxide structure, has been demonstrated to be an efficient method for increasing the charge transfer efficiency. Through the control and variation of synthetic parameters, different structures and morphologies of iron oxide were obtained, including hexagonal structures with a hollow ball shape and rhombohedral structures with rhombus-like shapes. Structural and morphological characterization methods such as X-ray diffraction and SEM morphology were used on the as-synthesized composite materials. The supercapacitor properties of the as-developed amorphous ribbons decorated with Fe2O3 nanoparticles were investigated by cyclic voltammetry, galvanostatic charge discharge, and electrochemical impedance spectroscopy. The flexible supercapacitor negative electrode demonstrates a specific capacitance of 5.96 F g-1 for the 0.2 M NaOH treated sample and 8.94 Fg-1 for the 0.4 M NaOH treated sample. The 0.2 M treated negative electrodes deliver 0.48 Wh/kg at a power density of 20.11 W/kg, and the 0.4 M treated electrode delivers 0.61 Wh/kg at a power density of 20.85 W/kg. The above results show that these flexible electrodes are adequate for integration in supercapacitor devices, for example, as negative electrodes.
Collapse
Affiliation(s)
- Mircea Nicolaescu
- Department of Materials and Manufacturing Engineering, Faculty of Mechanical Engineering, Politehnica University Timisoara, Mihai Viteazu 1, 300222 Timisoara, Romania; (M.N.); (V.-A.S.)
- National Institute for Research and Development in Electrochemistry and Condensed Matter, Dr. A. P. Podeanu 144, 300569 Timisoara, Romania; (M.V.); (C.L.); (C.O.); (C.B.)
| | - Melinda Vajda
- National Institute for Research and Development in Electrochemistry and Condensed Matter, Dr. A. P. Podeanu 144, 300569 Timisoara, Romania; (M.V.); (C.L.); (C.O.); (C.B.)
- Department of Applied Chemistry and Engineering of Inorganic Compounds and Environment, Faculty of Industrial Chemistry and Environmental Engineering, Politehnica University Timisoara, Piata Victoriei 2, 300006 Timisoara, Romania
| | - Carmen Lazau
- National Institute for Research and Development in Electrochemistry and Condensed Matter, Dr. A. P. Podeanu 144, 300569 Timisoara, Romania; (M.V.); (C.L.); (C.O.); (C.B.)
| | - Corina Orha
- National Institute for Research and Development in Electrochemistry and Condensed Matter, Dr. A. P. Podeanu 144, 300569 Timisoara, Romania; (M.V.); (C.L.); (C.O.); (C.B.)
| | - Cornelia Bandas
- National Institute for Research and Development in Electrochemistry and Condensed Matter, Dr. A. P. Podeanu 144, 300569 Timisoara, Romania; (M.V.); (C.L.); (C.O.); (C.B.)
| | - Viorel-Aurel Serban
- Department of Materials and Manufacturing Engineering, Faculty of Mechanical Engineering, Politehnica University Timisoara, Mihai Viteazu 1, 300222 Timisoara, Romania; (M.N.); (V.-A.S.)
| | - Cosmin Codrean
- Department of Materials and Manufacturing Engineering, Faculty of Mechanical Engineering, Politehnica University Timisoara, Mihai Viteazu 1, 300222 Timisoara, Romania; (M.N.); (V.-A.S.)
| |
Collapse
|
4
|
Etman A, Ibrahim A, Darwish F, Qasim K. A 10 years-developmental study on conducting polymers composites for supercapacitors electrodes: a review for extensive data interpretation. J IND ENG CHEM 2023. [DOI: 10.1016/j.jiec.2023.03.008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/11/2023]
|
5
|
Salah N, Shehab M, Nady JE, Ebrahim S, El-Maghraby E, Sakr AH. Polyaniline/ZnS Quantum Dots Nanocomposite as Supercapacitor Electrode. Electrochim Acta 2023. [DOI: 10.1016/j.electacta.2023.142174] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/07/2023]
|
6
|
Deka R, Rajak R, Kumar V, Mobin SM. Effect of Electrolytic Cations on a 3D Cd-MOF for Supercapacitive Electrodes. Inorg Chem 2023; 62:3084-3094. [PMID: 36758151 DOI: 10.1021/acs.inorgchem.2c03879] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/11/2023]
Abstract
A cadmium-based metal-organic framework (Cd-MOF) is synthesized in a facile manner at ambient temperature by an easy slow diffusion process. The three-dimensional (3D) structure of Cd-MOF is authenticated by single-crystal X-ray diffraction studies and exhibits a cuboid-shaped morphology with an average edge length of ∼1.13 μm. The prepared Cd-MOF was found to be electroactive in nature, which resulted in a specific capacitance of 647 F g-1 at 4 A g-1 by maintaining a retention of ∼78% over 10,000 successive cycles in the absence of any binder. Further, to distinguish the efficiency of Cd-MOF electrodes, different electrolytes (NaOH, KOH, and LiOH) were explored, wherein NaOH revealed a higher capacitive response due to its combined effect of ionic and hydrated ionic radii. To investigate the practical applicability, an asymmetric supercapacitor (ASC) device is fabricated by employing Cd-MOF as the positive electrode and activated carbon (AC) as the negative electrode, enabling it to light a commercial light-emitting diode (LED) bulb (∼1.8 V). The as-fabricated ASC device delivers comparable energy density and power density.
Collapse
|
7
|
Kandhasamy N, Preethi LK, Mani D, Walczak L, Mathews T, Venkatachalam R. RGO nanosheet wrapped β-phase NiCu 2S nanorods for advanced supercapacitor applications. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:18546-18562. [PMID: 36215010 DOI: 10.1007/s11356-022-23359-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/29/2022] [Accepted: 09/26/2022] [Indexed: 06/16/2023]
Abstract
A new integration strategy of transition metal sulfide with carbon-based materials is used to boost its catalytic property and electrochemical performances in supercapacitor application. Herein, crystalline reduced graphene oxide (rGO) wrapped ternary metal sulfide nanorod composites with different rGO ratios are synthesized using hydrothermal technique and are compared for their physical, chemical, and electrochemical performances. It is found that their properties are tuned by the weight ratios of rGO. The electrochemical investigations reveal that β-NiCu2S/rGO nanocomposite electrode with 0.15 wt.% of rGO is found to possess maximum specific capacitance of 1583 F g-1 at current density of 15 mA g-1 in aqueous electrolyte medium. The same electrode shows excellent cycling stability with capacitance retention of 89% after 5000 charging/discharging cycles. The reproducibility test performed on NiCu2S/rGO nanocomposite electrode with 0.15 wt.% of rGO indicates that it has high reproducible capacitive response and rate capability. Thus, the present work demonstrates that the β-NiCu2S/rGO nanocomposite can serve as a potential electrode material for developing supercapacitor energy storage system.
Collapse
Affiliation(s)
- Narthana Kandhasamy
- Centre for Nano Science and Nanotechnology, K.S. Rangasamy College of Technology, Tiruchengode, Tamil Nadu, 637215, India
| | - Laguduva K Preethi
- Centre for Nanoscience and Nanotechnology, Sathyabama Institute of Science and Technology (Deemed to Be University), Chennai, Tamil Nadu, 600119, India
| | - Devendiran Mani
- Central Instrumentation Laboratory, Vels Institute of Science Technology and Advanced Studies (VISTAS), Chennai, Tamil Nadu, 600117, India
| | - Lukasz Walczak
- Science & Research Division, PREVAC Sp. Z O.O, 44-362, Rogow, Poland
| | - Tom Mathews
- Surface and Nanoscience Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam, 603102, India
| | - Rajendran Venkatachalam
- Centre for Nano Science and Nanotechnology, K.S. Rangasamy College of Technology, Tiruchengode, Tamil Nadu, 637215, India.
- Department of Physics, Dr. N. G. P. Arts and Science College, Coimbatore, Tamil Nadu, 641048, India.
| |
Collapse
|