An ultra-small nine-color spectrometer with a two-layer biparted ten-dichroic-mirror array and an image sensor

Continuously variable Fourier filters fabricated using varying angle glancing angle deposition for chip-scale spectroscopy

Low-cost spectroscopy has received a great deal of attention in recent years in applications such as food inspection, disease detection, and manufacturing. Current spectroscopic systems rely on multiple optical components, making them mechanically fragile systems. In our previous work, we demonstrated the use of Fourier filtering using thin dielectric films. The sampling effect from the cavity resonances can be used to decompose a signal into its Fourier components. Although the thin films were deposited directly on the face of the detectors, filters of varying thicknesses were needed, which required multiple lithographic processes. To overcome this challenge, in this work, we use a continuously variable filters deposited by a single-step electron-beam evaporation technique. We demonstrate a novel, to our knowledge, method that utilizes the glancing angle deposition technique with a continuously varying angle in order to produce tens of variable Fourier filters in a single deposition run. To prove this technique, we deposit this variable filter on a 38-channel linear detector and show the results from this device.

Spectral origami: an angle-variable, wavelength-selective concept with a highly efficient filter-based sensing

This study demonstrates the concept of an angle-variable compact spectral module. As a key feature, the filter-based module enables highly efficient wavelength-selective light detection by applying the reflective beam path according to the origami example. It was accomplished through inclined mirrors, which allow for different incident angles on the wavelength separating interference filters used in a robust assembly with no moving parts. To experimentally verify the concept, a wavelength range between 550 and 700 nm was detected by 11 spectral channels. These initial results showed the potential to develop easily scalable and application-tailored sensors, which can overcome conventional filter-based sensor approaches that use upright or fixed-angle illumination.

Multi-channel Deep-UV absorbance measurement setup for multi-capillary electrophoresis with two fiber arrays facing each other

We have developed a simple, compact, and robust eight-channel ultraviolet (UV) absorption detection setup featuring two eight-fiber arrays (an irradiation fiber array and a detection fiber array) whose ends face each other across eight capillaries. UV light of a 220-nm wavelength from a single deuterium lamp is stably and evenly split into eight lights by using a thick homogenizing fiber connected to a fiber bundle with eight thin fibers, which make up the irradiation fiber array. Each capillary is directly irradiated with each UV light emitted from the irradiation fiber array and then each of the UV lights transmitted through the capillaries is collected by each fiber of the detection fiber array without using any other optical devices (e.g., a lens) and is detected by each of the eight photodetectors. This setup achieves simultaneous UV absorption measurement for all eight capillaries with the detection limit of 54 μAU, linear dynamic range of four logs or more, and negligible crosstalk of 0.01% or less. We also implemented an eight-capillary electrophoresis system and simultaneously analyzed eight immunoglobulin G samples, separated by capillary electrophoresis sodium dodecyl sulfate.