Graphene oxide classification and standardization

Red Emitting Solid-State CDs/PVP with Hydrophobicity for Latent Fingerprint Detection

Fluorescent carbon dots (CDs) are a new type of photoluminescent nanomaterial. Solid-state CDs usually undergo fluorescence quenching due to direct π-π* interactions and superabundant energy resonance transfer. Therefore, the preparation of solid-state fluorescent CDs is a challenge, especially the preparation of long wavelength solid-state CDs. In this research, long wavelength emission CDs were successfully synthesized by solvothermal methods, and the prepared CDs showed good hydrophobicity. The composite solid-state CDs/PVP (Polyvinyl pyrrolidone) can emit strong red fluorescence, and the quantum yield (QY) of the CDs/PVP powder reaches 18.9%. The prepared CDs/PVP solid-state powder was successfully applied to latent fingerprint detection. The results indicate that the latent fingerprints developed by CDs/PVP powder have a fine definition and high contrast visualization effect, which proves that the prepared CDs/PVP has great application potential in latent fingerprint detection. This study may provide inspiration and ideas for the design of new hydrophobic CDs.

Point-of-care devices engaging green graphene: an eco-conscious and sustainable paradigm

The healthcare landscape has experienced a profound and irreversible transformation, primarily driven by the emergence of nanomaterial-assisted point-of-care (POC) devices. The inclusion of nanomaterials in POC devices has revolutionized healthcare by enabling rapid, on-site diagnostics with minimal infrastructure requirements. Among the materials poised to lead this technological revolution, green graphene emerges as a compelling contender. It possesses a unique combination of exceptional material properties and environmentally conscious attributes. These attributes include its substantial surface area, unparalleled electrical conductivity, and inherent biocompatibility. This article embarks on an exploration of POC devices incorporating green graphene. It meticulously dissects the intricacies of their design, performance characteristics, and diverse applications. Throughout the exposition, the transformative impact of green graphene on the advancement of POC diagnostics takes centre stage. It underscores the material's potential to drive sustainable and effective healthcare solutions, marking a significant milestone in the evolution of healthcare technology.

Origin of Oxygen in Graphene Oxide Revealed by 17O and 18O Isotopic Labeling

Wet-chemical oxidation of graphite in a mixture of sulfuric acid with a strong oxidizer, such as potassium permanganate, leads to the formation of graphene oxide with hydroxyl and epoxide groups as the major functional groups. Nevertheless, the reaction mechanism remains unclear and the source of oxygen is a subject of debate. It could theoretically originate from the oxidizer, water, or sulfuric acid. In this study, we employed 18O and 17O labeled reagents to experimentally elucidate the reaction mechanism and, thus, determine the origin of oxo-functional groups. Our findings reveal the multifaceted roles of sulfuric acid, acting as a dispersion medium, a dehydrating agent for potassium permanganate, and an intercalant. Additionally, it significantly acts as a source of oxygen next to manganese oxides. Through 17O solid-state magic-angle spinning (MAS) NMR experiments, we exclude water as a direct reaction partner during oxygenation. With labeling experiments, we conclude on mechanistic insights, which may be exploited for the synthesis of novel graphene derivatives.

Synergies of WO3 and Co3O4 intercalated ball milling exfoliated graphene 3D helix electrocatalyst: A highly sensitive electrochemical detection of mesotrione herbicide in vegetable samples

In the booming global population, monitoring of mesotrione (MTN) like agricultural pollutants is crucial for human safety. Herein, the research reports the synthesis of tungsten trioxide (WO3) and cobalt oxide (Co3O4) nanostructures intercalated ball milling exfoliated graphene (WO3/Co3O4/graphene) 3D helix electrocatalyst for the electrochemical detection of MTN herbicide. The proposed WO3/Co3O4/graphene sensor material achieved a wide range of MTN detection from 0.001 µM to 1885 µM. In addition, the estimated limit of sensing and sensitivity values are 0.42 nM and 0.802 µAµM-1 cm-2 respectively. The real sample experiment was accomplished in MTN-added vegetables (corn, sugar cane, tomato, green soybean) and environmental samples (sewage water, river water). At most, the recorded minimum MTN response recovery in vegetables and water samples is about 95% and 98% respectively. Furthermore, the designed sensor electrode achieved storage stability of 98.7% after three weeks.

The effects of formation and functionalization of graphene-based membranes on their gas and water vapor permeation properties

The gas and water vapor permeabilities of graphene-based membranes can be affected by the presence of different functional groups directly bound to the graphene network. In this work, one type of carboxylated graphene oxide (GO-COOH) and two types of graphene oxide synthesized i) under strong oxidative conditions directly from graphite (GO-1) and ii) under mild oxidative conditions from exfoliated graphene (GO-2) were used as precursors of self-standing membranes prepared with thicknesses in the range of 12-55 μm via slow-vacuum filtration preparation method. It was observed that the permeabilities for all tested gases decreased in order GO-2 > GO-1 > GO-COOH and depended on both the arrangement of graphene sheets and their functionalization. The GO-1 membrane with a high content of oxygen-containing groups showed the best performance for water vapor permeability. The GO-2 membrane with a thickness of 43 μm exhibited a disordered GO sheet morphology and, therefore, unique gas-separation performance towards H2/CO2 gas pair, showing high hydrogen permeability while keeping extremely high H2/CO2 ideal selectivity that exceeds the Robeson 2008 upper bound of polymer membranes.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Application of Graphene Oxide in Oral Surgery: A Systematic Review

The current review aims to provide an overview of the most recent research in the last 10 years on the potentials of graphene in the dental surgery field, focusing on the potential of graphene oxide (GO) applied to implant surfaces and prosthetic abutment surfaces, as well as to the membranes and scaffolds used in Guided Bone Regeneration (GBR) procedures. "Graphene oxide" and "dental surgery" and "dentistry" were the search terms utilized on the databases Scopus, Web of Science, and Pubmed, with the Boolean operator "AND" and "OR". Reviewers worked in pairs to select studies based on specific inclusion and exclusion criteria. They included animal studies, clinical studies, or case reports, and in vitro and in vivo studies. However, they excluded systematic reviews, narrative reviews, and meta-analyses. Results: Of these 293 studies, 19 publications were included in this review. The field of graphene-based engineered nanomaterials in dentistry is expanding. Aside from its superior mechanical properties, electrical conductivity, and thermal stability, graphene and its derivatives may be functionalized with a variety of bioactive compounds, allowing them to be introduced into and improved upon various scaffolds used in regenerative dentistry. This review presents state-of-the-art graphene-based dental surgery applications. Even if further studies and investigations are still needed, the GO coating could improve clinical results in the examined dental surgery fields. Better osseointegration, as well as increased antibacterial and cytocompatible qualities, can benefit GO-coated implant surgery. On bacterially contaminated implant abutment surfaces, the CO coating may provide the optimum prospects for soft tissue sealing to occur. GBR proves to be a safe and stable material, improving both bone regeneration when using GO-enhanced graft materials as well as biocompatibility and mechanical properties of GO-incorporated membranes.

Ion and water adsorption to graphene and graphene oxide surfaces

Graphene and graphene oxide (GO) are two particularly promising nanomaterials for a range of applications including energy storage, catalysis, and separations. Understanding the nanoscale interactions between ions and water near graphene and GO surfaces is critical for advancing our fundamental knowledge of these systems and downstream application success. This minireview highlights the necessity of using surface-specific experimental probes and computational techniques to fully characterize these interfaces, including the nanomaterial, surrounding water, and any adsorbed ions, if present. Key experimental and simulation studies considering water and ion structures near both graphene and GO are discussed. The major findings are: water forms 1-3 hydration layers near graphene; ions adsorb electrostatically to graphene under an applied potential; the chemical and physical properties of GO vary considerably depending on the synthesis route; and these variations influence water and ion adsorption to GO. Lastly, we offer outlooks and perspectives for these research areas.

A scoping review of graphene-based biomaterials for in vivo bone tissue engineering

The growing demand for more efficient materials for medical applications brought together two previously distinct fields: medicine and engineering. Regenerative medicine has evolved with the engineering contributions to improve materials and devices for medical use. In this regard, graphene is one of the most promising materials for bone tissue engineering and its potential for bone repair has been studied by several research groups. The aim of this study is to conduct a scoping review including articles published in the last 12 years (from 2010 to 2022) that have used graphene and its derivatives (graphene oxide and reduced graphene) in preclinical studies for bone tissue regeneration, searching in PubMed/MEDLINE, Embase, Web of Science, Cochrane Central, and clinicaltrials.gov (to confirm no study has started with clinical trial). Boolean searches were performed using the defined key words "bone" and "graphene", and manuscript abstracts were uploaded to Rayyan, a web-tool for systematic and scoping reviews. This scoping review was conducted based on Joanna Briggs Institute Manual for Scoping Reviews and the report follows the recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses - Extension for Scoping Reviews (PRISMA-ScR) statement. After the search protocol and application of the inclusion criteria, 77 studies were selected and evaluated by five blinded researchers. Most of the selected studies used composite materials associated with graphene and its derivatives to natural and synthetic polymers, bioglass, and others. Although a variety of graphene materials were analyzed in these studies, they all concluded that graphene, its derivatives, and its composites improve bone repair processes by increasing osteoconductivity, osteoinductivity, new bone formation, and angiogenesis. Thus, this systematic review opens up new opportunities for the development of novel strategies for bone tissue engineering with graphene.