Low-cost biosorption of Fe(II) and Fe(III) from single and binary solutions using Ulva lactuca-derived cellulose nanocrystals-graphene oxide composite film

Fluorescent composite beads: An advanced tool for environmental monitoring and harmful pollutants removal from water

The quality and safety of water sources have been significantly impacted by various pollutants, including trace elements. To address this concern, this study utilized composite beads made of alginate and carbon quantum dots (CDs) for detecting and removing As(III) and Se(IV) ions in tap water. Fluorescent CDs were hydrothermally synthesized and incorporated into an alginate-Ca2+ matrix through a straightforward procedure. Characterization analyses revealed distinct properties of the composite beads, containing varying amounts of CDs, compared to the pristine beads. Optimal adsorption parameters (30 mg of adsorbent, 10 mg/L of initial pollutant concentration, 35 °C, and 180 min of contact time) for the beads containing 30 w/w-% of CDs (Alg@CDs30) were determined through a fractional factorial design. These composite beads exhibited the highest adsorption capacity for both metals, achieving a removal rate of 94.5% for As(III) and 98.0% for Se(IV) in tap water. Kinetic and isothermal analyses indicated that the adsorption of both metals on Alg@CDs30 involves a combination of chemisorption and diffusion processes. Recycling experiments demonstrated that the composite beads could be reused up to 20 times without a noticeable loss of adsorption efficiency. Regarding the sensing property, our experiments revealed a significant reduction in the fluorescence emission intensity of Alg@CDs30 upon interaction with As(III) and Se(IV), confirming its ability to detect both ions in tap water, with limits of detection (LOD) of 2.6 ± 0.5 μg/L for As(III) and 1.1 ± 0.2 μg/L for Se(IV). The alginate-Ca2+ matrix s contributed to the stability of the CDs' fluorescence. These results confirm the potential of Alg@CDs beads as effective tools for the simultaneous monitoring and removal of hazardous metal ions from real water samples.

Unveiling the potential of novel recyclable deep eutectic solvent pretreatment: Effective separation of lignin from poplar hydrolyzed residue

To effectively convert the fermentable sugars present in lignocellulosic biomass into biofuels and additional value-added products, it is crucial to remove lignin from the biomass. With the intention of expeditiously remove lignin from poplar wood and improve cellulose saccharification, an innovative ternary deep eutectic solvent (DES) benzyl triethyl ammonium chloride-ethylene glycol-FeCl3 (T-EG-F) was studied for the pretreatment of poplar hydrolyzed residue (PHR). The results revealed that following T-EG-F DES pretreatment at 130 °C for 4 h, the lignin removal rate reached 91.88 %. The effect of DES on PHR and regenerated lignin was comprehensively investigated using X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), Thermogravimetric (TG) and other characterization methods, providing valuable insights into the mechanism of this innovative biomass pretreatment. Moreover, there was a significant improvement in the enzyme digestibility of the DES pretreatment residue. At 48 h, the enzyme load of 30 FPU/g cellulose achieved a remarkable enzyme digestibility of 97.31 %, and this value exhibited a notable increase of 6.56 times compared to the untreated poplar sample. In addition, the T-EG-F could be recycled and reused. This study demonstrates that the potential of T-EG-F DES pretreatment as a green and efficient method for lignin dissociation from lignocellulosic biomass, offering a promising approach for biomass component separation.