Aerobic oxidative cleavage of 1,2-diols catalyzed by atomic-scale cobalt-based heterogeneous catalyst

Oxygenolytic cleavage of 1,2-diols with dioxygen by a mononuclear nonheme iron complex: Mimicking the reaction of myo-inositol oxygenase

A mononuclear iron(II) complex, [(TpPh2)FeII(OTf)(CH3CN)] (1) (TpPh2 = hydrotris(3,5-diphenylpyrazol-1-yl)borate, OTf = triflate) has been isolated and its efficiency toward the aliphatic CC bond cleavage reaction of 1,2-diols with dioxygen has been investigated. Separate reactions between 1 and different 1,2-diolates form the corresponding iron(II)-diolate complexes in solution. While the iron(II) complex of the tetradentate TPA (tris(2-pyridylmethyl)amine) ligand is not efficient in affecting the CC cleavage of 1,2-diol with dioxygen, complex 1 displays catalytic activity to afford carboxylic acid and aldehyde. Isotope labeling studies with 18O2 reveal that one oxygen atom from dioxygen is incorporated into the carboxylic acid product. The oxygenative CC cleavage reactions occur on the 1,2-diols containing at least one α-H atom. The kinetic isotope effect value of 5.7 supports the abstraction of an α-H by an iron(III)-superoxo species to propagate the CC cleavage reactions. The oxidative cleavage of 1,2-diolates by the iron(II) complex mimics the reaction catalyzed by the nonheme diiron enzyme, myo-inositol oxygenase.

Metal-Free Visible-Light Induced Oxidative Cleavage of C(sp3 )-C, and C(sp3 )-N Bonds of Nitriles, Alcohols, and Amines

Selective cleavage of unstrained (sp3 ) C-C/ C-N bonds under mild conditions is highly challenging due to the higher bond dissociation energy. A visible light mediated metal-free oxidative dehomologation of aryl acetonitriles, primary alcohols and diols to carboxylic acids via organophotocatalyzed C(sp3 )-CN, C(sp3 )-C(OH) bond cleavage is reported. Notably, this methodology was further extended towards selective synthesis of aldehydes via deamination of both primary as well as secondary amines. This mild protocol features wide array of substrate variation with excellent functional group tolerance, preparative-scale synthesis, and operational simplicity. Possible mechanisms for these transformations were demonstrated through a series of control experiments.

Aerobic oxidative C-C bond cleavage and functionalization for the synthesis of value-added chemicals

The aerobic oxidative cleavage of C-C bonds is an attractive and sustainable route for constructing valuable molecules such as esters, nitriles, and amides. Traditionally homogeneous catalytic systems for C-C bond cleavage required harsh conditions, stoichiometric oxidants, and noble metal catalysts to overcome the thermodynamic and kinetic barriers of C-C bonds, imposing environmental concerns of the transformation. Therefore, developing efficient, low-cost, and environmentally benign methods for C-C bond cleavage is of great importance and a cutting-edge area in modern chemistry. This feature article summarizes the sustainable aerobic oxidative C-C bond cleavage method developed by our group in the past 5 years. Fundamental principles in catalyst design, substrate scope, and mechanism for C-C bond cleavage are also discussed.

Cobalt nanoparticles-catalyzed aerobic oxygenation and esterification of alkynes via C≡C bonds cleavage

An unprecedented efficient protocol is developed for the oxidative cleavage of C≡C bonds in alkynes to produce structure-diverse esters using heterogeneous cobalt nanoparticles as catalyst with molecular oxygen as the oxidant. A diverse set of mono- and multisubstituted aromatic and aliphatic alkynes can be effectively cleaved and converted into the corresponding esters. Characterization analysis and control experiments indicate high surface area and pore volume, as well as nanostructured nitrogen-doped graphene-layer coated cobalt nanoparticles are possibly responsible for excellent catalytic activity. Mechanistic studies reveal that ketones derived from alkynes under oxidative conditions are formed as intermediates, which subsequently are converted to esters through a tandem sequential process. The catalyst can be recycled up to five times without significant loss of activity.

Oxidative cleavage and ammoxidation of organosulfur compounds via synergistic Co-Nx sites and Co nanoparticles catalysis

The cleavage and functionalization of C-S bonds have become a rapidly growing field for the design or discovery of new transformations. However, it is usually difficult to achieve in a direct and selective fashion due to the intrinsic inertness and catalyst-poisonous character. Herein, for the first time, we report a novel and efficient protocol that enables direct oxidative cleavage and cyanation of organosulfur compounds by heterogeneous nonprecious-metal Co-N-C catalyst comprising graphene encapsulated Co nanoparticles and Co-Nx sites using oxygen as environmentally benign oxidant and ammonia as nitrogen source. A wide variety of thiols, sulfides, sulfoxides, sulfones, sulfonamides, and sulfonyl chlorides are viable in this reaction, enabling access to diverse nitriles under cyanide-free conditions. Moreover, modifying the reaction conditions also allows for the cleavage and amidation of organosulfur compounds to deliver amides. This protocol features excellent functional group tolerance, facile scalability, cost-effective and recyclable catalyst, and broad substrate scope. Characterization and mechanistic studies reveal that the remarkable effectiveness of the synergistic catalysis of Co nanoparticles and Co-Nx sites is crucial for achieving outstanding catalytic performance.

Heterogeneous M-N-C Catalysts for Aerobic Oxidation Reactions: Lessons from Oxygen Reduction Electrocatalysts

Nonprecious metal heterogeneous catalysts composed of first-row transition metals incorporated into nitrogen-doped carbon matrices (M-N-Cs) have been studied for decades as leading alternatives to Pt for the electrocatalytic O2 reduction reaction (ORR). More recently, similar M-N-C catalysts have been shown to catalyze the aerobic oxidation of organic molecules. This Focus Review highlights mechanistic similarities and distinctions between these two reaction classes and then surveys the aerobic oxidation reactions catalyzed by M-N-Cs. As the active-site structures and kinetic properties of M-N-C aerobic oxidation catalysts have not been extensively studied, the array of tools and methods used to characterize ORR catalysts are presented with the goal of supporting further advances in the field of aerobic oxidation.

Protocol for the preparation of amorphous manganese oxide and its application as heterogeneous catalyst in the direct synthesis of amides and nitriles

The cleavage and functionalization of carbon-carbon (C–C) bonds has emerged as a powerful tool for preparing value-added chemicals. In this protocol, we describe the preparation of amorphous manganese oxide and its application as a heterogeneous catalyst in the direct synthesis of amides via successive cleavage and amidation of C–C bonds in alcohols. Furthermore, we describe how a slight modification of reaction conditions allows for the cleavage and cyanation of alcohols to access sterically hindered nitriles.

For complete details on the use and execution of this protocol, please refer to He et al. (2022).

•

Heterogeneous MnO_x-catalyzed cleavage and amidation/cyanation of alcohols

•

Convenient preparation of MnO_x in large scale

•

Recycling and reusing of MnO_x

•

Wide substrate scope and gram-scale synthesis allowable

Publisher’s note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics.

Sustainable aerobic oxidative coupling of thiols and amines for selective formation of sulfenamides using MOF-derived cobalt nanoparticles supported on N-doped carbon

A heterogeneous catalyst system has been developed for the aerobic oxidative coupling of thiols with amines for the selective formation of various sulfenamides with ZIF-67-derived cobalt-based N-doped carbon catalysts.

A product-controllable aerobic oxidative cleavage of vicinal diols using vanadium-based photocatalyst

A photocatalytic controllable oxidative cleavage of C-C bond is developed with molecular oxygen as the oxidant. Herein, a series of vanadium oxide-based photocatalysts were synthesized and characterized by XPS, PL,...

Heterogeneous vanadium-catalyzed oxidative cleavage of olefins for sustainable synthesis of carboxylic acids

The development of green and sustainable processes to synthesize active pharmaceutical ingredients and key starting materials is a priority for the pharmaceutical industry. A green and sustainable protocol for the oxidative cleavage of olefins to produce pharmaceutically and biologically valuable carboxylic acids is achieved. The developed protocol involves 70% aq. TBHP as an oxidant over a heterogeneous vanadium catalyst system. Notably, the synthesis of industrially important azelaic acid from various renewable vegetable oils is accomplished. The catalyst could be recycled for up to 5 cycles without significant loss in yield and the protocol was successfully demonstrated at the gram-scale.

Cobalt-Catalyzed Aerobic Oxidative Cleavage of Alkyl Aldehydes: Synthesis of Ketones, Esters, Amides, and α-Ketoamides

A widely applicable approach was developed to synthesize ketones, esters, amides via the oxidative C-C bond cleavage of readily available alkyl aldehydes. Green and abundant molecular oxygen (O₂ ) was used as the oxidant, and base metals (cobalt and copper) were used as the catalysts. This strategy can be extended to the one-pot synthesis of ketones from primary alcohols and α-ketoamides from aldehydes.

One-pot synthesis of new alkyl 1-naphthoates bearing quinoline, pyranone and cyclohexenone moieties via metal-free sequential addition/oxidation reactions

A mild and one-pot synthetic pathway was successfully developed for the synthesis of new naphthoate-based scaffolds containing quinoline, pyranone and cyclohexenone moieties via a multistep reaction between acenaphthoquinone and various 1,3-diketones in the presence of different primary aliphatic and benzylic alcohols. This reaction proceeds via a sequential addition/oxidation mechanistic process including a metal-free addition step of acenaphthoquinone and 1,3-diketones followed by the H₅IO₆-mediated C–C oxidative cleavage of the corresponding vicinal diols at room temperature. The alcohols play a dual role, as the reaction solvent as well as the nucleophile, to conduct the reaction process toward naphthoate formation. All alkyl naphthoate derivatives prepared in this work are new compounds and were definitively characterized using ¹H-NMR, ¹³C-NMR and HRMS analysis, while X-ray crystallography was carried out for one of the products. The synthesis of a naphthalene-based nucleus attached to heterocyclic moieties is noteworthy to follow in the near future for diverse applications in biology, medicine, metal complex design, and semiconductor and optical materials.

Various new alkyl 1-naphthoates bearing quinoline, pyranone and cyclohexenone moieties were successfully synthesized by a one-pot sequential addition/oxidation process.

Cobalt Nanoparticles-Catalyzed Widely Applicable Successive C-C Bond Cleavage in Alcohols to Access Esters

Selective cleavage and functionalization of C-C bonds have important applications in organic synthesis and biomass utilization. However, functionalization of C-C bonds by controlled cleavage remains difficult and challenging because they are inert. Herein, we describe an unprecedented efficient protocol for the breaking of successive C-C bonds in alcohols to form esters with one or multiple carbon atoms less using heterogeneous cobalt nanoparticles as catalyst with dioxygen as the oxidant. A wide range of alcohols including inactive long-chain alkyl aryl alcohols undergo smoothly successive cleavage of adjacent -(C-C)_n - bonds to afford the corresponding esters. The catalyst was used for seven times without any decrease in activity. Characterization and control experiments disclose that cobalt nanoparticles are responsible for the successive cleavage of C-C bonds to achieve excellent catalytic activity, while the presence of Co-N_x has just the opposite effect. Preliminary mechanistic studies reveal that a tandem sequence reaction is involved in this process.

Metal-free Photocatalytic Aerobic Oxidative Cleavage of C-C Bonds in 1,2-Diols

The preparation of carbonyl compounds by the aerobic oxidative cleavage of C-C bonds in 1,2-diols under mild reaction conditions is a very significant reaction and is widely employed in various scenarios. Avoiding the use of harmful stoichiometric oxidants and adopting a greener chemical process remain a challenge for this reaction to date. In this manuscript, a heterogeneous metal-free photocatalytic strategy without any additive was developed for aerobic oxidative cleavage of C-C bonds in 1,2-diols at ambient conditions with visible light. The reaction mechanism was further studied through a series of control experiments and density functional theory (DFT) calculations. In addition, the catalytic system showed a broad substrates scope, including aliphatic (linear or cyclic) 1,2-diols, benzylic, alkenyl 1,2-diols, and α-hydroxy acids (such as lactic acid). Thus, this strategy could serve as a method for the transformation of 1,2-diols to corresponding carbonyl compounds by the aerobic oxidative cleavage of C-C bonds.

The occurrence of inositolphosphoceramides in spirulina microalgae

Spirulina microalga (Arthrospira platensis) is an interesting phototrophic organism because of its high content of nutrients including proteins, lipids, essential amino acids, antioxidants, vitamins, polysaccharides, and minerals. Hydrophilic interaction liquid chromatography (HILIC) coupled to linear ion trap (LIT) and Orbitrap Fourier transform mass spectrometry (FTMS) via ESI was employed for the separation and characterization of lipid species in A. platensis. Inositolphosphoceramides (IPC) are minor but important constituents of spirulina; their investigation was accomplished by HILIC-ESI-MS including collision-induced dissociation (MS² , MS³ ) of deprotonated molecules in the LIT analyzer and a schematic fragmentation pattern is described. All four commercial spirulina samples revealed the occurrence of the same IPC species at m/z 796.6 (d18:0/16:0;1), 810.6 (d18:0/17:0;1), 824.6 (d18:0/18:0;1), and 826.6 (d18:0/17:0;2) but in diverse relative abundance. This study sets the stage for future investigations on IPC in other algae and microalgae.

Trinuclear ruthenium core-containing polyoxometalate-based hybrids: preparation, characterization and catalytic behavior

Two ruthenium-containing polyoxometalate-based hybrids (Ru-POMs), KH8[Ru3O(Trz)6Cl3]2[(NaO6)W6(H2O)6(AsW9O33)4]·28H2O (1) and H3[Ru3O(Trz)6Cl3]2[(WO)2W(OH)(AsW9O33)2]·6H2O (2), (Trz = 1,2,4-triazole), were successfully isolated by a one-step hydrothermal method under different acidic conditions and further characterized by single-crystal X-ray diffraction, powder X-ray diffraction (PXRD), IR spectroscopy, electrospray ionization and mass spectrometry (ESI-MS), thermogravimetric (TG) analyses and elemental analyses. Single-crystal X-ray diffraction analyses reveal two polyanions comprised of four/two identical trivacant Keggin-type polyanion building blocks, leading to the formation of tetrameric/dimeric assembly stabilized by additional metal-oxo cores, respectively. ESI-MS shows that the polyanion units [(NaO6)W6(H2O)6(AsW9O33)4]11- and [(WO)2W(OH)(AsW9O33)2]5- are intact in mixed solvent. Moreover, the two heterogeneous catalysts with trinuclear ruthenium cations were further investigated, and 1 was found to exhibit much higher yield (94.1%)/conversion (95.1%) and better selectivity (>99%) towards the oxidation of thioanisole to sulfoxide than 2.

Facile synthesis of a highly efficient Co/Cu@NC catalyst for base-free oxidation of alcohols to esters

Co/Cu nanoparticle co-decorated N-doped carbon exhibits excellent activity and stability for base-free oxidation of alcohols to esters.

Isopropanol as a hydrogen source for single atom cobalt-catalyzed Wacker-type oxidation

The first example of Wacker-type oxidation catalyzed by a single atom cobalt catalyst under dioxygen using isopropanol as the hydrogen source was established.