Iridium-catalyzed Markovnikov hydrosilylation of terminal alkynes achieved by using a trimethylsilyl-protected trihydroxysilane

Hydrosilylation of Arynes with Silanes and Silicon-Based Polymer

Benzyne derived from hexadehydrogenated Diels Alder (HDDA) reactions was found to be an efficient hydrosilylation acceptors. Various silanes can react smoothly with HDDA-derived benzyne to give the arylation products. Lewis acid such as boron trifluoride etherate can accelerate these hydrosilylation reactions. Polyhydromethylsiloxane (PHMS), a widely used organosilicon polymer, was also successfully modified using our method. About 5 % of Si-H bonds in the polymer were inserted by benzynes, giving a functional PHMS with much more solubility in methanol and with a blue-emitting fluorescence behavior. Mechanism research shows that the insertion of benzyne into the Si-H bond probably undergoes a synergistic pathway, which is quite different from the traditional radical-initiated hydrosilylation or transition-metal-catalyzed hydrosilylation.

Diastereoselective access to substituted oxetanes via hydrosilylation-iodocyclisation of homopropargylic alcohols

The regio and stereoselective hydrosilylation of a variety of homopropargylic alcohols and their derivatives is described. The reaction is tolerant to a variety of sterically and electronically varied substrates, affording only the E-vinyl silane as a sole regioisomer. The application of the resultant vinyl silanes towards the diastereoselective synthesis of tetrasubstituted oxetanes is demonstrated.

Hydroboration and Diboration of Internal Alkynes under Iridium Catalysis

Here we demonstrate the feasibility and efficiency of simple iridium-based catalytic systems in the synthesis of multisubstituted alkenyl boronates from internal alkynes with high selectivities. A variety of alkynes were smoothly decorated with HBpin under a mild [Ir(cod)Cl]₂/dppm/acetone condition to afford trisubstituted alkenyl boronic esters with up to >99:1 regioselectivity. The diboration reaction could effectively occur in the presence of [Ir(cod)Cl]₂/DCM. Plausible mechanisms were provided to illustrate these two catalytic processes, in which the intrinsic functional group of the alkyne was supposed to be important in facilitating these reactions as well as the regioselectivity.

Engineering regioselectivity in the hydrosilylation of alkynes using heterobimetallic dual-functional hybrid catalysts

The synthesis and characterization of carbon black supported rhodium and iridium heterobimetallic hybrid catalysts and their application in the hydrosilylation of alkynes is described.

Cobalt-catalyzed alkyne hydrosilylation as a new frontier to selectively access silyl-hydrocarbons

The hydrosilylation of alkynes is a chief chemical method for accessing a range of alkenylsilanes, which can be derivatized to obtain value-added hydrocarbons and utilized in diverse applications. While noble metal-based catalytic procedures have shown great success in accessing vinylsilanes within the context of both academia and industry, replacing the noble metals with cheaper and more abundant base metals has recently drawn significant interest due to their catalytic sustainability and competencies including unprecedented reactivity that could expand chemical tools for accessing other types of silicon-containing hydrocarbons. During the past few years, a number of well-defined, robust cobalt-catalyst platforms that broadly operate either the Chalk-Harrod or a modified Chalk-Harrod mechanism have emerged as a new frontier in the field of selective alkyne hydrosilylation. This review describes the main features of cobalt catalyst systems recently documented for the hydrosilylation of alkynes with a strong emphasis on ligand design and reaction pathways involving Co-H and/or Co-silyl species-mediated elementary transformations to achieve Markovnikov/anti-Markovnikov hydrosilylations as well as new migratory transformations.

Iridium(i) complexes bearing hemilabile coumarin-functionalised N-heterocyclic carbene ligands with application as alkyne hydrosilylation catalysts

A set of iridium(i) complexes of formula IrCl(κC,η²-I^RCou^R')(cod) or IrCl(κC, η²-BzI^RCou^R')(cod) (cod = 1,5-cyclooctadiene; Cou = coumarin; I = imidazolin-2-carbene; BzI = benzimidazolin-2-carbene) have beeen prepared from the corresponding azolium salt and [Ir(μ-OMe)(cod)]₂ in THF at room temperature. The crystalline structures of 4b and 5b show a distorted trigonal bipyramidal configuration in the solid state with a coordinated coumarin moiety. In contrast, an equilibrium between this pentacoordinated structure and the related square planar isomer is observed in solution as a consequence of the hemilability of the pyrone ring. Characterization of both species by NMR was achieved at the low and high temperature limits, respectively. In addition, the thermodynamic parameters of the equilibrium, ΔH_R and ΔS_R, were obtained by VT ¹H NMR spectroscopy and fall in the range 22-33 kJ mol^-1 and 72-113 J mol^-1 K^-1, respectively. Carbonylation of IrCl(κC,η²-BzI^TolCou^7,8-Me₂)(cod) resulted in the formation of a bis-CO derivative showing no hemilabile behaviour. The newly synthesised complexes efficiently catalyze the hydrosilylation of alkynes at room temperature with a preference for the β-(Z) vinylsilane isomer.

Transition-Metal-Catalyzed Stereo- and Regioselective Hydrosilylation of Unsymmetrical Alkynes

Alkyne hydrosilylation is one of the most efficient methods for the synthesis of alkenyl silicon derivatives and has been a hot topic of research for decades. This short review summarizes the progress in transition-metal-catalyzed stereo- and regioselective hydrosilylation of unsymmetrical alkynes. Topics are discussed based on different types of alkynes and the selectivities.

1 Introduction

2 Terminal Alkyne Hydrosilylation

2.1 β-E Selectivity

2.2 β-Z Selectivity

2.3 α-selectivity

3 Internal Alkyne Hydrosilylation

3.1 Aryl–Alkyl Acetylenes

3.2 Alkyl–Alkyl Acetylenes

3.3 Internal Alkynes with Polarized Substituents

4 Summary and Outlook

Markovnikov Hydrosilylation of Alkynes with Tertiary Silanes Catalyzed by Dinuclear Cobalt Carbonyl Complexes with NHC Ligation

Metal-catalyzed hydrosilylation of alkynes is an ideal atom-economic method to prepare vinylsilanes that are useful reagents in the organic synthesis and silicone industry. Although great success has been made in the preparation of β-vinylsilanes by metal-catalyzed hydrosilylation reactions of alkynes, reported metal-catalyzed reactions for the synthesis of α-vinylsilanes suffer from narrow substrate scope and/or poor selectivity. Herein, we present selective Markovnikov hydrosilylation reactions of terminal alkynes with tertiary silanes using a dicobalt carbonyl N-heterocyclic carbene (NHC) complex [(IPr)₂Co₂(CO)₆] (IPr = 1,3-di(2,6-diisopropylphenyl)imidazol-2-ylidene) as catalyst. This cobalt catalyst effects the hydrosilylation of both alkyl- and aryl-substituted terminal alkynes with a variety of tertiary silanes with good functional group compatibility, furnishing α-vinylsilanes with high yields and high α/β selectivity. Mechanistic study revealed that the stoichiometric reactions of [(IPr)₂Co₂(CO)₆] with PhC≡CH and HSiEt₃ can furnish the dinuclear cobalt alkyne and mononuclear cobalt silyl complexes [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₃], [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₂(IPr)], and [(IPr)Co(CO)₃(SiEt₃)], respectively. Both dicobalt bridging alkyne complexes can react with HSiEt₃ to yield α-triethylsilyl styrene and effect the catalytic Markovnikov hydrosilylation reaction. However, the mono(NHC) dicobalt complex [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₃] exhibits higher catalytic activity over the di(NHC)-dicobalt complexes. The cobalt silyl complex [(IPr)Co(CO)₃(SiEt₃)] is ineffective in catalyzing the hydrosilylation reaction. Deuterium labeling experiments with PhC≡CD and DSiEt₃ indicates the syn-addition nature of the hydrosilylation reaction. The absence of deuterium scrambling in the hydrosilylation products formed from the catalytic reaction of PhC≡CH with a mixture of DSiEt₃ and HSi(OEt)₃ hints that mononuclear cobalt species are less likely the in-cycle species. These observations, in addition to the evident of nonsymmetric Co₂C₂-butterfly core in the structure of [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₃], point out that mono(IPr)-dicobalt species are the genuine catalysts for the cobalt-catalyzed hydrosilylation reaction and that the high α selectivity of the catalytic system originates from the joint play of the dicobalt carbonyl species to coordinate alkynes in the Co(μ-η²:η²-HCCR')Co mode and the steric demanding nature of IPr ligand.

Iridium-catalyzed regioselective hydrosilylation of internal alkynes facilitated by directing and steric effects

Here we reported the iridium-catalyzed hydrosilylation of internal alkynes under simple and mild conditions. The intrinsic functional groups of alkyne substrates were disclosed to be crucial in facilitating both the hydrosilylation process and related regioselectivity owing to their coordination capability towards the iridium catalyst. Utilization of the steric trimethylsilyl-protected trihydroxysilane proved to be another critical factor in ensuring the efficient proceeding of this process.

(Z)-Selective Hydrosilylation and Hydroboration of Terminal Alkynes Enabled by Ruthenium Complexes with an N-Heterocyclic Carbene Ligand

Metal-catalyzed trans-1,2-hydrosilylations and hydroborations of terminal alkynes that generate synthetically valuable (Z)-alkenylsilanes and (Z)-alkenylboranes remain challenging due to the (E)-selective nature of the reactions and the formation of the thermodynamically unfavorable (Z)-isomer. The development of new, efficient catalytic systems for the (Z)-selective hydrosilylation and hydroboration of terminal alkynes is thus highly desirable from a fundamental perspective as it would deepen our understanding of the metal-catalyzed (Z)-selective hydrosilylation and hydroboration of terminal alkynes. This personal account describes our research for developing a ruthenium complex that can efficiently catalyze the hydrosilylation and hydroboration of terminal alkynes, and for exploring the factors controlling (Z)-selectivity of the reactions. Our effort into the activation of B-protected boronic acids, R-B(dan) (dan=naphthalene-1,8-diaminato), that was believed not to participate in Suzuki-Miyaura cross-coupling, is also discussed.

Carbon supported hybrid catalysts for controlled product selectivity in the hydrosilylation of alkynes

A series of Rh- and Ir-hybrid catalysts with varying tether lengths has been prepared by immobilization of Rh^I, Rh^III and Ir^III complexes on carbon black, and applied in the hydrosilylation of alkynes.

Supported Ni nanoparticles with a phosphine ligand as an efficient heterogeneous non-noble metal catalytic system for regioselective hydrosilylation of alkynes

A convenient and effective heterogeneous non-noble metal catalytic system for regioselective hydrosilylation of alkynes was successfully developed by the combination of Ni/Al2O3 with a xantphos ligand. The resulting catalytic system displayed excellent catalytic performance in the heterogeneous hydrosilylation of PhSiH3 with a wide range of aromatic and aliphatic terminal alkynes, affording the corresponding (E)-vinylsilanes in good to excellent yields with high regioselectivity.

f-Element silicon and heavy tetrel chemistry

The last three decades have seen a significant increase in the number of reports of f-element carbon chemistry, whilst the f-element chemistry of silicon, germanium, tin, and lead remain underdeveloped in comparison. Here, in this perspective we review complexes that contain chemical bonds between f-elements and silicon or the heavier tetrels since the birth of this field in 1985 to present day, with the intention of inspiring researchers to contribute to its development and explore the opportunities that it presents. For the purposes of this perspective, f-elements include lanthanides, actinides and group 3 metals. We focus on complexes that have been structurally authenticated by single-crystal X-ray diffraction, and horizon-scan for future opportunities and targets in the area.

Progress on Iridium-Catalyzed Hydrosilylation of Alkenes and Alkynes

Hydrosilylation of multiple carbon–carbon bonds is a well-known process for the construction of organosilicon compounds. Nowadays, precious metal catalysts, especially platinum complexes, still occupy dominant positions in such processes. However, one important member of the precious metal family, iridium, is less used in this field. As early research mainly focused on developing stable and effective iridium catalysts, recent advances have disclosed the specific efficiency of simple iridium catalytic systems in the synthesis of functional organo­silicon compounds. This short review summarizes the utilization of iridium complexes for the hydrosilylation of alkenes and alkynes, with an emphasis on the recent advances published in the last decade.

1 Introduction

2 Iridium-Catalyzed Hydrosilylation of Alkenes

3 Iridium-Catalyzed Hydrosilylation of Alkynes

4 Conclusions and Perspectives

One simple Ir/hydrosilane catalytic system for chemoselective isomerization of 2-substituted allylic ethers

Here, we describe one simple Ir/hydrosilane catalytic system for chemoselective isomerization of 2-substituted allylic ethers. This facile strategy shows high efficiency towards a variety of substrates, including derivatives from bioactive molecules. The substituent at the α position of the olefins is supposed to be critical in retarding the alkene hydrosilylation process and leading the reaction to go through the isomerization pathway.