Exploring the roles of oxygen species in H2 oxidation at β-MnO2 surfaces using operando DRIFTS-MS

Advanced sustainable processes via functionalized Fe-N co-doped fishbone biochar for the remediation of plasticizer di-(2-ethylhexyl) phthalate-contaminated marine sediment

Sediments are important sinks for di-(2-ethylhexyl) phthalate (DEHP), a plasticizer, and thus, maintaining the sediment quality is essential for eliminating plasticizers in aqueous environments and recovering the sediment ecological functions. To mitigate the potential risks of endocrine-disrupting compounds, identifying an effective and eco-friendly degradation process of organic pollutants from sediments is important. However, sustainable and efficient utilization of slow pyrolysis for converting shark fishbone to generate shark fishbone biochar (SFBC) has rarely been explored. Herein, SFBC biomass was firstly produced by externally incorporating heteroatoms or iron oxide onto its surface in conjunction with peroxymonosulfate (PMS) to promote DEHP degradation and explore the associated benthic bacterial community composition from the sediment in the water column using the Fe-N-SFBC/PMS system. SFBC was pyrolyzed at 300-900 °C in aqueous sediment using a carbon-advanced oxidation process (CAOP) system based on PMS. SFBC was rationally modified via N or Fe-N doping as a radical precursor in the presence of PMS (1 × 10-5 M) for DEHP removal. The innovative SFBC/PMS, N-SFBC/PMS, and Fe-N-SFBC/PMS systems could remove 82%, 65%, and 90% of the DEHP at pH 3 in 60 min, respectively. The functionalized Fe3O4 and heteroatom (N) co-doped SFBC composite catalysts within a hydroxyapatite-based structure demonstrated the efficient action of PMS compared to pristine SFBC, which was attributed to its synergistic behavior, generating reactive radicals (SO4•-, HO•, and O2•-) and non-radicals (1O2) involved in DEHP decontamination. DEHP was significantly removed using the combined Fe-N-SFBC/PMS system, revealing that indigenous benthic microorganisms enhance their performance in DEHP-containing sediments. Further, DEHP-induced perturbation was particularly related to the Proteobacteria phylum, whereas Sulfurovum genus and Sulfurovum lithotrophicum species were observed. This study presents a sustainable method for practical, green marine sediment remediation via PMS-CAOP-induced processes using a novel Fe-N-SFBC composite material and biodegradation synergy.

Structure-Property Interplay Within Microporous Manganese Dioxide Tunnels For Sustainable Energy Storage

Tunnel-structured manganese dioxides (MnO2 ), also known as octahedral molecule sieves (OMS), are widely studied in geochemistry, deionization, energy storage and (electro)catalysis. These functionalities originate from their characteristic sub-nanoscale tunnel framework, which, with a high degree of structural polymorphism and rich surface chemistry, can reversibly absorb and transport various ions. An intensive understanding of their structure-property relationship is prerequisite for functionality optimization, which has been recently approached by implementation of advanced (in situ) characterizations providing significant atomistic sciences. This review will thus timely cover recent advancements related to OMS and their energy storage applications, with a focus on the atomistic insights pioneered by researchers including our group: the origins of structural polymorphism and heterogeneity, the evolution of faceted OMS crystals and its effect on electrocatalysis, the ion transport/storage properties and their implication for processing OMS. These studies represent a clear rational behind recent endeavors investigating the historically applied OMS materials, the summary of which is expected to deepen the scientific understandings and guide material engineering for functionality control.

Revealing the intrinsic nature of Ni-, Mn-, and Y-doped CeO2 catalysts with positive, additive, and negative effects on CO oxidation using operando DRIFTS-MS

The catalytic activity of a transition metal (host) oxide can be influenced by doping with a second cation (dopant), but the key factors dominating the activity of the doped catalyst are still controversial. Herein, CeO2 doped with Ni, Mn, and Y catalysts prepared using aerosol pyrolysis were used to demonstrate the positive, negative, and additive effects on CO oxidation as a model reaction. Various characterization results indicated that Ni, Mn, and Y had been successfully doped into the CeO2 lattice. The catalytic activities of each catalyst for CO conversion were in the order of Ni-CeO2 > Mn-CeO2 > CeO2 > Y-CeO2. Operando DRIFTS-MS and various characterization methods were applied to reveal the intrinsic nature of the doping effects. The accumulation rate of the surface bidentate carbonates determined the CO oxidation. A definition to evaluate the doping effect was proposed, which is anticipated to be useful for developing a rational catalyst with a high CO oxidation activity. The CO oxidation reactivities displayed strong correlations with the surface factors obtained from operando DRIFTS-MS analysis and the structure factors from XPS and Raman analyses.

Unveiling the Surface Chemical Reactions during Multi-Phase Catalytic Oxidation of Soot on Nanoengineering/Interfacing/Doping-Prepared Mn-CeO2 Catalysts Using TG-MS and Operando DRIFTS-MS

The aerosol pyrolysis method from nitrate precursors was used to prepare the Mn-CeO2 catalyst containing Mn2O3, CeO2, and Mn-doped CeO2 nanoparticles for catalyzing carbonous soot oxidation. The prepared Mn-CeO2 catalysts have high specific surface areas, Ce3+ ratio, and oxygen vacancy defects; these are a benefit for soot oxidation. The T50 for soot oxidation on the 0.57Mn-CeO2 catalyst is as low as 355 °C, which is 329 °C lower than that for soot oxidation without a catalyst. The catalysts were characterized using XRD, SEM-EDS, HRTEM, XPS, Raman spectroscopy, H2-TPR-MS, O2-TPD-MS, soot-TPR-MS, and operando DRIFTS-MS. The functions of Mn2O3, CeO2, and Mn-doped CeO2 in the 0.57Mn-CeO2 catalyst are unveiled. Mn-doped CeO2 plays a key role and CeO2 participates in soot oxidation, while Mn2O3 is used to enhance higher ratios of Ce3+, via the reaction of Mn3+ + Ce4+ = Mn4+ + Ce3+. The mechanism of soot oxidation on Mn-CeO2 was proposed.

Insight into the Metal-Support Interaction of Pt and β-MnO2 in CO Oxidation

Pt-based catalysts exhibit unique catalytic properties in many chemical reactions. In particular, metal-support interactions (MSI) greatly improve catalytic activity. However, the current MSI mechanism between platinum (Pt) and the support is not clear enough. In this paper, the interaction of 1 wt% Pt nanoparticles (NPs) on β-MnO2 in carbon monoxide (CO) oxidation was studied. The Pt on β-MnO2 inhibited CO oxidation below 210 °C but promoted it above 210 °C. A Pt/β-MnO2 catalyst contains more Pt4+ and less Pt2+. The results of operando DRIFTS-MS show that surface-terminal-type oxygen (M=O) plays an important role in CO oxidation. When the temperature was below 210 °C, Mn=O consumption on Pt/β-MnO2 was less than β-MnO2 due to Pt4+ inhibition on CO oxidation. When the temperature was above 210 °C, Pt4+ was reduced to Pt2+, and Mn=O consumption due to CO oxidation was greater than β-MnO2. The interaction of Pt and β-MnO2 is proposed.

DRIFTS-MS Investigation of Low-Temperature CO Oxidation on Cu-Doped Manganese Oxide Prepared Using Nitrate Aerosol Decomposition

Cu-doped manganese oxide (Cu-Mn₂O₄) prepared using aerosol decomposition was used as a CO oxidation catalyst. Cu was successfully doped into Mn₂O₄ due to their nitrate precursors having closed thermal decomposition properties, which ensured the atomic ratio of Cu/(Cu + Mn) in Cu-Mn₂O₄ close to that in their nitrate precursors. The 0.5Cu-Mn₂O₄ catalyst of 0.48 Cu/(Cu + Mn) atomic ratio had the best CO oxidation performance, with T₅₀ and T₉₀ as low as 48 and 69 °C, respectively. The 0.5Cu-Mn₂O₄ catalyst also had (1) a hollow sphere morphology, where the sphere wall was composed of a large number of nanospheres (about 10 nm), (2) the largest specific surface area and defects on the interfacing of the nanospheres, and (3) the highest Mn³⁺, Cu⁺, and Oads ratios, which facilitated oxygen vacancy formation, CO adsorption, and CO oxidation, respectively, yielding a synergetic effect on CO oxidation. DRIFTS-MS analysis results showed that terminal-type oxygen (M=O) and bridge-type oxygen (M-O-M) on 0.5Cu-Mn₂O₄ were reactive at a low temperature, resulting in-good low-temperature CO oxidation performance. Water could adsorb on 0.5Cu-Mn₂O₄ and inhibited M=O and M-O-M reaction with CO. Water could not inhibit O₂ decomposition to M=O and M-O-M. The 0.5Cu-Mn₂O₄ catalyst had excellent water resistance at 150 °C, at which the influence of water (up to 5%) on CO oxidation could be completely eliminated.

Operando DRIFT-MS for studying the oxidative steam reforming of ethanol (OSRE) reaction

An operando DRIFT-MS system (Diffuse Reflectance Infrared Fourier Transform Spectroscopy coupled with Mass Spectrometry) was designed and set up to study the oxidative steam reforming of ethanol reaction (OSRE). This reaction involves the mixture of water, ethanol and oxygen to produce mainly hydrogen, which is a rather attractive energy carrier. Spectroscopic monitoring of the process is a key tool to contribute to the understanding of: i) the dynamics on the catalyst surface, ii) the reaction mechanism and iii) the effect of the solid's properties on the catalytic process. In this sense, this document sets forth the experimental design that allows to carry out the study under operando DRIFT-MS conditions through time for the OSRE reaction. Selection criteria for parameters, materials, configuration, and experimental conditions are included, particularly optimizing the parameters of particle size and the dilution factor with KBr as well as the temperature and flow conditions for carrying out the reaction.•Clear signals of the adsorbed species in IR that do not present interference by water in the reaction atmosphere.•Simple assembly and online product detection by MS that allow to follow the change in the products of the OSRE reaction according to the temperature.•Controlled entry of gases and quantification by loop injection.