Autotransplantation of teeth: an evidence-based approach

A Comparison of Anterior and Posterior Dental Autotransplants: A Systematic Review

The ability to restore both function and aesthetics after tooth loss is a cornerstone of modern dentistry. Various treatments are available for replacing missing teeth, among which dental autotransplantation has emerged as an innovative approach. Historically, tooth autotransplantation has been a common remedy for dental avulsion in young patients; however, in recent years, it has gained recognition as a viable and predictable option for replacing hopeless teeth in adults as well. This study aims to systematically evaluate and compare the effectiveness of anterior versus posterior dental autotransplants, while also providing an overview of the techniques employed in these procedures. Utilizing online platforms such as PubMed and the UIC University library, articles published between 2010 and 2023 were selected for review. The findings of this systematic review indicate that dental autotransplantion, regardless of whether it occurs in the anterior or posterior region, yields optimal aesthetic and functional results alongside long-term positive outcomes. Autotransplantation is particularly beneficial for trauma-related tooth loss, especially in younger patients, where ongoing bone growth necessitates the preservation of bone levels. The studies reviewed consistently demonstrate that this technique offers significant advantages in terms of function, appearance, and structural integrity, with compelling evidence supporting its long-term viability. In summary, dental autotransplantation is a valuable treatment option that not only addresses the immediate concerns following tooth loss but also contributes to maintaining oral health and aesthetics over time.

Combined application of artificial bone powders and concentrated growth factor membranes on the autotransplantation of mature third molars: A 5-year retrospective case series

AIM

This study aimed to observe the efficacy and outcomes of the combined application of artificial bone powder and concentrated growth factor (CGF) membranes for tooth transplantation in cases with wide recipient sockets and small donor teeth.

MATERIAL AND METHODS

A total of 36 teeth from 36 patients with wide recipient sockets and small donor teeth were enrolled. Autogenous tooth transplantation was performed using bone powders and CGF membranes. After transplantation, the visual analog scale (VAS) score, Landry Wound Healing Index, probing depth (PD), mobility, and gray value of the alveolar bone around the transplanted teeth were measured, and a patient satisfaction questionnaire was administered. All patients underwent clinical and radiographic examinations during follow-up.

RESULTS

The VAS score of 16 (44.4%) cases after 1 week was 0, and 26 (72.2%) patients showed excellent gingival healing after 2-4 weeks. The PD of a few cases was deeper than 3 mm during the first month; however, returned to normal after 3 months. Although the majority of the transplanted teeth possessed mobility greater than grade I during the first month, the mobility gradually improved within 3 months. The gray value of the alveolar bone around the transplanted teeth, 1 year postoperatively showed no difference with pre-operation (p > .05). During the mean follow-up period of 42.7 months (range 20-72 months), 33 of the 36 transplanted teeth remained in situ without clinical or radiographic complications, with an overall success rate of 91.7%.

CONCLUSIONS

Although the PD and mobility of the transplanted teeth were not ideal during the early stages of healing, most of the transplanted teeth had good clinical outcomes. In cases with large recipient sites accompanied by small donor teeth, autotransplantation of teeth using artificial bone powder combined with CGF membranes is a viable option and can lead to optimistic results with favorable success rates.

New Perspectives in Third Molar Auto-Transplantation: Literature Review and a Case Report of Clinical, Financial and Forensic Implications

Third molar extraction is the most common procedure in oral and maxillofacial surgery. Third molars are considered less functional than other teeth and are often extracted. Sometimes, they are also used for auto-transplantation for the benefit of oral rehabilitation. Since many biological factors are involved in this surgical approach, herein, we outline a review of the biological characteristics of medico-legal/forensic interest, in addition to presenting a successful clinical case. A scoping review of currently available research data (following the principles of PRISMA-ScR or the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews) on third molar auto-transplantation was conducted by drawing upon the main databases (Scopus, PubMed, Google Scholar and LILACS) to evaluate biological and clinical characteristics possibly relatable to forensic issues. All the collected data were summarized and elaborated on for the purpose of this article. A patient underwent extraction of the right upper first molar and auto-transplantation of the unerupted ipsilateral third molar. Many biologic and clinical factors are involved in the success of this clinical procedure. Knowledge of third molar anatomy, of its development and viable surgical approaches are all essential elements; just as important are the treatment of the tooth before and after transplantation and the integrity of the periodontal ligament. Follow-up of the clinical case for 5 years made it possible to verify the stability of the procedure over time. Third molar auto-transplantation is feasible and cost-effective. However, the use of third molars as donor teeth in auto-transplantation may have medico-legal implications. The lack of official protocols and consistent evidence-based guidelines for operators still prevent such a procedure from becoming mainstream; therefore, it is viewed with suspicion by clinicians and patients, even though the biological factors herein detected point to a reasonably high degree of safety. The understanding of many specific biological and clinical factors involved in the stability of third molar auto-transplantation allows for a thorough understanding of the forensic implications relevant to clinical practice. Effective communication and information provision are therefore of utmost importance, in the interest of both patients and doctors.

Effects of cryopreservation on the biomechanical properties of dentin in cryopreserved teeth: An in-vitro study

This study focused on the biomechanical properties and microstructural changes in dentin of teeth in different age groups after cryopreserved for different durations. Ninety third molars from three age groups (youth group, middle-age group, and elderly group), were collected and randomly divided into three groups according to freezing time at -196 °C (7 days, 30 days, and 90 days). Control group was shored at ordinary temperature. After rewarming, the compressive strength and elastic modulus of the dentin were measured with an electronic universal tester. Scanning electron microscopy was used to evaluate the microstructure of dentin after cryopreservation. After cryopreservation, the compressive strength of the teeth in each experimental group was not significantly different from control group. With the increase of freezing time and age, dentin's elastic modulus showed a decreasing trend. There were statistically significances between the control group and freezing 90d group, freezing 7d and 90d group, youth and middle-aged group, youth and elderly group (P < 0.05). Both freezing time and age factors were significant for the elastic modulus of dentin(P＜0.05). There was no interaction effect for age and freezing time. In transverse sections of scanning electron microscopy, the dentinal tubule became narrower, partially occluded, and more easily adhered to impurities in the long freezing time and elderly group. In longitudinal sections, with freezing time and age, the inner wall of the dentinal tubules became rough especially in the aged group cryopreserved for 90 days. No significant microcracks exited in any of the longitudinal sections of dentin.

Unusual Indications of Teeth Transplantation: A Literature Review

Dental implants are one of the best valid tooth replacement options, though these are not always appropriate in growing young patients. Tooth autotransplantation can be indicated then. However, this is not the only scenario where dental transplantation can be indicated. This comprehensive literature review discusses a wide range of unusual indications of dental transplantation as reported throughout the medical literature. Surprisingly, these indications include management of some developmental dental anomalies, hypodontia, oroantral communications, alveolar clefts, deficient alveolar ridges, ectopic teeth, and maxillofacial injuries. Limited high-quality evidence in this field regarding most of these unusual indications warrants further research of high-quality design.

What Are the Complications, Success and Survival Rates for Autotransplanted Teeth? An Overview of Systematic Reviews and Metanalyses

Background: Autotransplantation is the surgical repositioning of a tooth within the same patient. It can be thought of as the controlled avulsion and re-implantation of a tooth and can be a viable alternative to other dental rehabilitation options. This review aimed to evaluate the survival rate (SR), major complications such as ankylosis rate (AR) and infection-related root resorption (RR), and overall success and failure rate (FR) in autotransplanted teeth. Methods: Six databases were accessed up to January 2021 to obtain all systematic reviews and meta-analyses (SRs and MAs). Study selection: After title and abstract reading, data extraction was performed from eligible SRs. The methodological quality was calculated for the included SRs using the risk of bias in systematic reviews (ROBIS) tool. Results: Six SRs were included in this review. The overall failure rate ranged from as low as 2.0% to 10.32%. The 1-year survival was very high (97.4–98.0%). The 5-year survival rate ranged from 81 to 98.2%. Major complications of AR ranged from 1.2 to 6.2%, and RR ranged from 2.1 to 10.4%. Conclusion: The overall findings from these SR and MA are promising; however, all the SRs include only single-arm prospective or retrospective studies, the SRs are of overall low methodological quality, and for the heterogeneity of the included SRs, well-designed comparative studies with a long-term follow-up are recommended.

Reconsidering some standards in immediate autotransplantation of teeth: Case report with 2-year follow-up

Introduction

Dental autotransplantation (DAT) is that surgical procedure of extracting a tooth from one place (donor site) and transplanting it into another (recipient site) within the same individual. If successfully implemented, the treatment outcome will pose characteristics of a natural tooth rather than a dental prosthesis. This case report sheds light on the validity of this treatment option, and provides suggestions to reconsider some standards regarding its conventional protocols.

Case presentation

A 24-year-old female with no history of medical conditions presented with hopelessnon-restorable lower molars with clinical signs of chronic infection. Cone-beam computed tomography (CBCT) was used to check compatibility of her third molars for DAT. After clinical and radiographical examination, patient's consent to perform DAT of impacted upper right third molar to replace the lower right first molar was obtained. Based on patient's CBCT, an individual replica of the donor tooth was fabricated. Replica helped in pre-preparing recipient site to fit the dimensions of the donor tooth before being extracted and transplanted. The extraction socket was thoroughly debrided and irrigated to ensure the removal of any lesion or infection. Immediate DAT was carried out with minimal trauma to the transplant. Follow-up for 2 years showed functional transplant with uneventful healing of periodontal and pulpal tissues.

Conclusion

Some standards regarding DAT needs to be reconsidered. Routine prophylactic endodontic treatment is not necessary for every case of DAT even when transplanted tooth is mature. Immediate autotransplantation into an infected site can be successful if the recipient site is managed properly.

Materials for Dentoalveolar Bioprinting: Current State of the Art

Although current treatments can successfully address a wide range of complications in the dentoalveolar region, they often still suffer from drawbacks and limitations, resulting in sub-optimal treatments for specific problems. In recent decades, significant progress has been made in the field of tissue engineering, aiming at restoring damaged tissues via a regenerative approach. Yet, the translation into a clinical product is still challenging. Novel technologies such as bioprinting have been developed to solve some of the shortcomings faced in traditional tissue engineering approaches. Using automated bioprinting techniques allows for precise placement of cells and biological molecules and for geometrical patient-specific design of produced biological scaffolds. Recently, bioprinting has also been introduced into the field of dentoalveolar tissue engineering. However, the choice of a suitable material to encapsulate cells in the development of so-called bioinks for bioprinting dentoalveolar tissues is still a challenge, considering the heterogeneity of these tissues and the range of properties they possess. This review, therefore, aims to provide an overview of the current state of the art by discussing the progress of the research on materials used for dentoalveolar bioprinting, highlighting the advantages and shortcomings of current approaches and considering opportunities for further research.

Application of concentrated growth factor to autotransplantation with inflammation in recipient area

OBJECTIVE

The purpose of this study was to apply concentrated growth factor (CGF) to the transplanted area with inflammation, to observe the clinical effects of CGF on the inflammation area assisted by 3D printing technology.

METHODS

A total of 52 compromised mandibular first or second molar with chronic periapical lesions were transplanted with mature third molars. The patients were divided into CGF group (n = 26) and control group (n = 26) and transplanted into fresh extraction sockets with or without CGF. All the patients underwent clinical and radiographic examinations during the follow-up.

RESULTS

Average surgery and extra-oral time were 39 min (± 7.8) and 42 s (± 10.2). The success rates of CGF group and control group were 100% and 92.3% respectively. Most of the periapical lesions in CGF group healed completely within 3 months, which was significantly faster than control group. The initial stability of CGF group was better than control group immediately after operation, and the degree of pain in CGF group was lower than control group on the 1st and 3rd day after operation.

CONCLUSIONS

The application of CGF in recipient site with chronic periapical lesions can accelerate the regeneration of alveolar bone and the healing of inflammation, greatly shorten the healing period. Meanwhile, CGF help to reduce postoperative pain and reaction at the early stage of healing and increase the success rate of autogenous tooth transplantation (ATT). Additionally, the use of 3D printing model can greatly reduce the extra-oral time of donor teeth.

Autotransplantation of the Third Molar: A Therapeutic Alternative to the Rehabilitation of a Missing Tooth: A Scoping Review

INTRODUCTION

Tooth autotransplantation is the repositioning of an erupted, partially erupted, or non-erupted autologous tooth from one site to another within the same individual. Several factors influence the success rate of the autotransplant, such as the stage of root development, the morphology of the tooth, the surgical procedure selected, the extraoral time, the shape of the recipient socket, the vascularity of the recipient bed, and the vitality of the cells of the periodontal ligament. The aim of this scoping review was to provide the most up-to-date information and data on the clinical principles of the third-molar autograft and thus provide clinical considerations for its success.

MATERIALS AND METHODS

This review was conducted based on PRISMA-ScR (Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews). The research was conducted by searching for keywords in three databases-PubMed, Scopus and Google Scholar-by two independent reviewers following the PRISMA protocol, from which 599 records were identified.

CONCLUSIONS

Third-molar autotransplantation is a valid solution to replace missing teeth. The key to the success of this technique is the surgical procedure, which must be as atraumatic as possible to preserve the periodontal ligament of the tooth to be transplanted. The success rate is also linked to the stage of development of the root, with a worse prognosis in the case of a complete root.

Autotransplantation of Two Immature Third Molars with the Use of L-PRF

Tooth autotransplantation is a procedure which provides the extraction of an erupted or impacted tooth and its repositioning to another site in the oral cavity. This Case Report describes a successful case of two autotransplantations of open-apex mandibular third molars in place of the hopeless first mandibular molars with the use of L-PRF in a growing patient. A 15-year-old male patient was referred to the Dental Clinic for the extractions of the two hopeless mandibular first molars. Autotransplantation was considered the best treatment option for both sites 36 and 46, because the presence of two impacted mandibular third molars (38 and 48) with an incomplete root formation. Teeth 36 and 46 were extracted and replaced with teeth 38 and 48. The patient had an uneventful healing. At follow-up visits, the two autotransplanted teeth showed physiologic mobility, absence of inflammation and discomfort, and absence of infection; probing depth values were within normal range, and the vitality tests were positive. After 2 years, the teeth in position 36 and 46 showed absence of infection and mobility, and positive pulp vitality tests and the radiographic examinations exhibited closure of the root apices as well as absence of any periapical radiolucency or root resorption. Tooth autotransplantation is a good treatment option in case of tooth loss offering an alternative to traditional or implant-supported prosthesis especially for growing patients.

Autotransplantation of a mandibular third molar, using a customized reservoir

Autogenous transplantation is a fast and economical option when a suitable donor tooth is available for the replacement of nonsalvageable teeth. The preservation of the periodontal ligament (PDL) cells is considered to be critical for the success of a transplanted tooth. This article presents a successful case report of autotransplantation of a mandibular third molar using a novel technique to store the donor tooth extraorally during the surgical procedure and preserve the viability of PDL cells. One year of clinical and radiographic examination revealed no signs or symptoms suggestive of any pathology and the marginal adaptation of gingiva around the donor tooth appeared to be satisfactory. Inappropriate cases, this treatment approach may be considered as an alternative to conventional prosthetic rehabilitation or implant treatment.

Autotransplantation of a surgically removed canine using a customised 3D-printed surgical template

Autotransplantation is a treatment option with high reported survival rates to replace failing teeth in the anterior maxilla. This treatment requires a multidisciplinary approach from orthodontists, paediatric dentists, restorative dentists, and oral and maxillofacial surgeons to achieve successful outcomes. Success is dependent on many factors including stage of root development, handling of the periodontal ligament, extra-alveolar time and splinting. This case report presents the novel use of digitally designed and three-dimensional (3D) printed surgical templates to aid intraoperatively and reduce the extra-alveolar time. A preoperative cone-beam computed tomography scan allowed digital planning and construction of surgical templates that replicated the exact root dimensions of impacted maxillary canines. These templates were subsequently 3D printed in resin, sterilised and utilised intraoperatively to aid socket preparation before the surgical autotransplantation.

Autotransplantation in combination with orthodontic treatment

INTRODUCTION

Autotransplantation is a surgical method in which a tooth is repositioned within the same patient. It can be described as a controlled reimplantation of an extracted tooth into a new, surgically prepared socket. The key to success of this treatment is the preservation and regeneration of the periodontal ligament. It is an underutilized technique which, if conducted with a multidisciplinary team, can be an ideal treatment option for patients with failing or missing teeth.

OBJECTIVES

The detailed clinical procedures, indications for this technique, and the factors affecting its success are discussed.