Surface plasmon delocalization in silver nanoparticle aggregates revealed by subdiffraction supercontinuum hot spots

Theoretical Quantum Model of Two-Dimensional Propagating Plexcitons

When plasmonic excitations of metallic interfaces and nanostructures interact with electronic excitations in semiconductors, new states emerge that hybridize the characteristics of the uncoupled states. The engendered properties make these hybrid states appealing for a broad range of applications, ranging from photovoltaic devices to integrated circuitry for quantum devices. Here, through quantum modeling, the coupling of surface plasmon polaritons and mobile two-dimensional excitons such as those in atomically thin semiconductors is examined with emphasis on the case of strong coupling. Our model shows that at around the energy crossing of the dispersion relationships of the uncoupled species, they strongly interact and polariton states --propagating plexcitons -- emerge. The temporal evolution of the system where surface plasmon polaritons are continuously injected into the system is simulated to gain initial insight on potential experimental realizations of these states. The results show a steady state that is dominated by the lower-energy polariton. The study theoretically further establishes the possible existence of propagating plexcitons in atomically thin semiconductors and provides important guidance for the experimental detection and characterization of such states for a wide range of optoelectronic technologies.

Planar Aperiodic Arrays as Metasurfaces for Optical Near-Field Patterning

Plasmonic metasurfaces have spawned the field of flat optics using nanostructured planar metallic or dielectric surfaces that can replace bulky optical elements and enhance the capabilities of traditional far-field optics. Furthermore, the potential of flat optics can go far beyond far-field modulation and can be exploited for functionality in the near-field itself. Here, we design metasurfaces based on aperiodic arrays of plasmonic Au nanostructures for tailoring the optical near-field in the visible and near-infrared spectral range. The basic element of the arrays is a rhomboid that is modulated in size, orientation, and position to achieve the desired functionality of the micron-size metasurface structure. Using two-photon-photoluminescence as a tool to probe the near-field profiles in the plane of the metasurfaces, we demonstrate the molding of light into different near-field intensity patterns and active pattern control via the far-field illumination. Finite element method simulations reveal that the near-field modulation occurs via a combination of the plasmonic resonances of the rhomboids and field enhancement in the nanoscale gaps in between the elements. This approach enables optical elements that can switch the near-field distribution across the metasurface via wavelength and polarization of the incident far-field light and provides pathways for light matter interaction in integrated devices.

From localized to delocalized plasmonic modes, first observation of superradiant scattering in disordered semi-continuous metal films

Our study proposes a new way to observe and explain the presence of extended plasmonic modes in disordered semi-continuous metal films before the percolation threshold. Attenuated total reflection spectroscopy allows us to follow the transition of plasmon modes from localized to delocalized resonances, but also reveals unobserved collective plasmon modes. These bright modes with out-of-plane polarization are transverse collective plasmonic resonances. By increasing the density of metallic nanoparticles in a wavelength scale, we observe an angular squeezing and spectral broadening of these modes. This behavior can be explained considering that transverse localized surface plasmon resonances of each nanoparticle, all resonant, interact in a collective and coherent way via a common confined light mode: the evanescent wave. These many-body resonances, which have never been clearly identified in such disordered semi-continuous metal films, can be described by analogy with atomic physics as superradiant modes. Our first simulations, using dyadic Green's formalism, demonstrate the existence of this mode for a dense array of plasmonic systems. In this regime, the radiation rate of the superradiant mode increases with the number of tied dipoles. This explains the spectral broadening observed in our work and constitutes the first manifestation of superradiance mode in plasmonic random structure.

Investigation of laser-induced inter-welding between Au and Ag nanoparticles and the plasmonic properties of welded dimers

Noble metallic nanoparticles with unique plasmonic properties are useful in a variety of applications including bio-imaging, sensing, cancer therapy, etc. The properties of metallic nanoparticles can be tuned in multiple ways, among which laser welding is a highly efficient method. In this study, laser-induced inter-welding of Ag-Au nanoparticle (NP) dimers was investigated using in situ transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). For the first time, the welding process was directly visualized. The structural and compositional evolution of Ag-Au dimers was studied in detail, and several typical nanostructures formed during the welding process, including two types of core-shell structures, were discovered. Based on these observations, we proposed a complete mechanism explaining how welding proceeds under the influence of a laser. Finite difference time domain (FDTD) simulations demonstrated that the plasmonic properties of welded Ag-Au dimers were different from those of pure Au-Au or Ag-Ag dimers and can be tuned by forming shells, alloying or changing the size ratio of Ag and Au NPs.

Micropatterning of planar metal electrodes by vacuum filling microfluidic channel geometries

We present a simple, facile method to micropattern planar metal electrodes defined by the geometry of a microfluidic channel network template. By introducing aqueous solutions of metal into reversibly adhered PDMS devices by desiccation instead of flow, we are able to produce difficult to pattern "dead end" or discontinuous features with ease. We characterize electrodes fabricated using this method and perform electrical lysis of mammalian cancer cells and demonstrate their use as part of an antibody capture assay for GFP. Cell lysis in microwell arrays is achieved using the electrodes and the protein released is detected using an antibody microarray. We show how the template channels used as part of the workflow for patterning the electrodes may be produced using photolithography-free methods, such as laser micromachining and PDMS master moulding, and demonstrate how the use of an immiscible phase may be employed to create electrode spacings on the order of 25-50 μm, that overcome the current resolution limits of such methods. This work demonstrates how the rapid prototyping of electrodes for use in total analysis systems can be achieved on the bench with little or no need for centralized facilities.

Mapping VIS-terahertz (≤17 THz) surface plasmons sustained on native and chemically functionalized percolated gold thin films using EELS

Heterogeneous assemblies of molecules (Rhodamine B) adsorbed onto a nano-corrugated metallic surface (a percolated Au network) are investigated using electron energy loss spectroscopy in the scanning transmission electron microscope (STEM-EELS). Our first measurements target the native metallic substrate, which consists of a commercial Au thin film atop an ultrathin carbon membrane. The Au film displays a percolated morphology with nanostructures of estimated thickness ≤10 nm approximately. We observe a rich plasmonic response from the metallic substrate; one which varies nanometrically and spans the VIS-terahertz region. Multiple localized plasmons are detected at individual nanometric integrated areas, while an analysis of their spatial distribution reveals that for each integrated energy range (50 meV integration window) resonances are simultaneously supported at different locations within the film. We record subsequent EEL spectrum images of the hybrid molecular-metallic construct after deposition of Rhodamine B molecules onto the substrate, where plasmons, molecular vibrations and electronic excitations might all be simultaneously detected. A comparison of average signals for both systems is performed and spectral variations within the three spectral regions where molecular signatures may be observed are discussed. Our measurements and their analysis, if applied to the same location before and after molecular deposition, may be used to rationalize optical microscopic and spectroscopic measurements that take advantage of the interplay between molecules and plasmons.

Plasmonic Horizon in Gold Nanosponges

An electromagnetic wave impinging on a gold nanosponge coherently excites many electromagnetic hot-spots inside the nanosponge, yielding a polarization-dependent scattering spectrum. In contrast, a hole, recombining with an electron, can locally excite plasmonic hot-spots only within a horizon given by the lifetime of localized plasmons and the speed carrying the information that a plasmon has been created. This horizon is about 57 nm, decreasing with increasing size of the nanosponge. Consequently, photoluminescence from large gold nanosponges appears unpolarized.

Broadband enhancement in absorption cross-section of N719 dye using different anisotropic shaped single crystalline silver nanoparticles

Schematic representing broadband enhancement in absorption cross-section of N719 dye using different anisotropic shaped single crystalline silver nanoparticles.

Label-free multi-color superlocalization of plasmonic emission within metallic nano-interstice using femtosecond chirp-manipulated four wave mixing

We demonstrate an as yet unused method to sieve, localize, and steer plasmonic hot spot within metallic nano-interstices close to percolation threshold. Multicolor superlocalization of plasmon mode within 60 nm was constantly achieved by chirp-manipulated superresolved four wave mixing (FWM) images. Since the percolated film is strongly plasmonic active and structurally multiscale invariant, the present method provides orders of magnitude enhanced light localization within single metallic nano-interstice, and can be universally applied to any region of the random film. The result, verified by the maximum likelihood estimation (MLE) and deconvolution stochastic optical reconstruction microscopy (deconSTORM) algorithm, may contribute to label-free multiplex superlocalized spectroscopy of single molecule and sub-cellular activity monitoring combining hot spot steering capability.

Revealing Optical Properties of Reduced-Dimensionality Materials at Relevant Length Scales

Reduced-dimensionality materials for photonic and optoelectronic applications including energy conversion, solid-state lighting, sensing, and information technology are undergoing rapid development. The search for novel materials based on reduced-dimensionality is driven by new physics. Understanding and optimizing material properties requires characterization at the relevant length scale, which is often below the diffraction limit. Three important material systems are chosen for review here, all of which are under investigation at the Molecular Foundry, to illustrate the current state of the art in nanoscale optical characterization: 2D semiconducting transition metal dichalcogenides; 1D semiconducting nanowires; and energy-transfer in assemblies of 0D semiconducting nanocrystals. For each system, the key optical properties, the principal experimental techniques, and important recent results are discussed. Applications and new developments in near-field optical microscopy and spectroscopy, scanning probe microscopy, and cathodoluminescence in the electron microscope are given detailed attention. Work done at the Molecular Foundry is placed in context within the fields under review. A discussion of emerging opportunities and directions for the future closes the review.

Hot-Electron Intraband Luminescence from Single Hot Spots in Noble-Metal Nanoparticle Films

Disordered noble-metal nanoparticle films exhibit highly localized and stable nonlinear light emission from subdiffraction regions upon illumination by near-infrared femtosecond pulses. Such hot spot emission spans a continuum in the visible and near-infrared spectral range. Strong plasmonic enhancement of light-matter interaction and the resulting complexity of experimental observations have prevented the development of a universal understanding of the origin of light emission. Here, we study the dependence of emission spectra on excitation irradiance and provide the most direct evidence yet that the continuum emission observed from both silver and gold nanoparticle aggregate surfaces is caused by recombination of hot electrons within the conduction band. The electron gas in the emitting particles, which is effectively decoupled from the lattice temperature for the duration of emission, reaches temperatures of several thousand Kelvin and acts as a subdiffraction incandescent light source on subpicosecond time scales.

Low-Cost, Disposable, Flexible and Highly Reproducible Screen Printed SERS Substrates for the Detection of Various Chemicals

Ideal SERS substrates for sensing applications should exhibit strong signal enhancement, generate a reproducible and uniform response, and should be able to fabricate in large-scale and low-cost. Herein, we demonstrate low-cost, highly sensitive, disposable and reproducible SERS substrates by means of screen printing Ag nanoparticles (NPs) on a plastic PET (Polyethylene terephthalate) substrates. While there are many complex methods for the fabrication of SERS substrates, screen printing is suitable for large-area fabrication and overcomes the uneven radial distribution. Using as-printed Ag substrates as the SERS platform, detection of various commonly known chemicals have been done. The SERS detection limit of Rhodamine 6G (R6G) is higher than the concentration of 1 × 10⁻¹⁰ M. The relative standard deviation (RSD) value for 784 points on the detection of R6G and Malachite green (MG) is less than 20% revealing a homogeneous SERS distribution and high reproducibility. Moreover, melamine (MA) is detected in fresh liquid-milk without additional pretreatment, which may accelerate the application of rapid on-line detection of MA in liquid milk. Our screen printing method highlights the use of large-scale printing strategies for the fabrication of well-defined functional nanostructures with applications well beyond the field of SERS sensing.

Optical control of fluorescence through plasmonic eigenmode extinction

We introduce the concept of optical control of the fluorescence yield of CdSe quantum dots through plasmon-induced structural changes in random semicontinuous nanostructured gold films. We demonstrate that the wavelength- and polarization dependent coupling between quantum dots and the semicontinuous films, and thus the fluorescent emission spectrum, can be controlled and significantly increased through the optical extinction of a selective band of eigenmodes in the films. This optical method of effecting controlled changes in the metal nanostructure allows for versatile functionality in a single sample and opens a pathway to in situ control over the fluorescence spectrum.

Time-domain interferometry of surface plasmons at nonlinear continuum hot spots in films of silver nanoparticles

Nonlinear continuum generation from diffraction-limited hot spots in rough silver films exhibits striking narrow-band intensity resonances in excitation wavelength. Time-domain Fourier spectroscopy uncovers how these resonances arise due to the formation of a "plasmon staircase", a discreteness in the fundamental oscillation of the plasmon excitations responsible for generating the white-light continuum. Whereas multiple scattering from discrete antennas can be invoked to explain hot spot formation in random assemblies of isolated particles, hot spots in films of fused nanoparticles are excited by interfering propagating surface plasmons, launched by scattering from individual nanoparticle antennas. For closed films, discrete propagating plasmons interact coherently over distances of tens of microns to pump the hot spot.

3D nanostar dimers with a sub-10-nm gap for single-/few-molecule surface-enhanced raman scattering

Plasmonic nanostar-dimers, decoupled from the substrate, have been fabricated by combining electron-beam lithography and reactive-ion etching techniques. The 3D architecture, the sharp tips of the nanostars and the sub-10 nm gap size promote the formation of giant electric-field in highly localized hot-spots. The single/few molecule detection capability of the 3D nanostar-dimers has been demonstrated by Surface-Enhanced Raman Scattering.

Autocatalytic oxidization of nanosilver and its application to spectral analysis

The stable yellow nanosilver (AgNP) and blue nanosilver (AgNPB) sols were prepared by the NaBH₄ procedure. The new nanocatalytic reaction of AgNP-NaCl-H₂O₂ was investigated by surface plasmon resonance (SPR) absorption, resonance Rayleigh scattering (RRS), surface-enhanced Raman scattering (SERS) and scanning electron microscope (SEM) techniques. The autocatalytic oxidization of Ag on AgNP surface by H₂O₂ was observed firstly and the AgNP/AgCl nanoparticles were characterized. The [Ag⁺] from AgNP is different to the Ag⁺ from AgNO₃ that adsorb on the AgNP surface. An autocatalytic oxidization mechanism was proposed to explain experimental phenomena. The relationship between the SPR absorption peaks and the RRS peaks of AgNPB was studied, and three characteristic RRS peaks called as out-of-plane quadrupole, out-of-plane dipole and in-plane dipole RRS peaks were observed firstly. Using AgNP as nanoprobe, a simple, sensitive and selective RRS method was developed for assay of H₂O₂ in the range of 2.0 × 10⁻⁸-8.0 × 10⁻⁵ mol/L.

Out-diffused silver island films for surface-enhanced Raman scattering protected with TiO2 films using atomic layer deposition

We fabricated self-assembled silver nanoisland films using a recently developed technique based on out-diffusion of silver from an ion-exchanged glass substrate in reducing atmosphere. We demonstrate that the position of the surface plasmon resonance of the films depends on the conditions of the film growth. The resonance can be gradually shifted up to 100 nm towards longer wavelengths by using atomic layer deposition of titania, from 3 to 100 nm in thickness, upon the film. Examination of the nanoisland films in surface-enhanced Raman spectrometry showed that, in spite of a drop of the surface-enhanced Raman spectroscopy (SERS) signal after the titania spacer deposition, the Raman signal can be observed with spacers up to 7 nm in thickness. Denser nanoisland films show slower decay of the SERS signal with the increase in spacer thickness.

PACS

78.67.Sc (nanoaggregates; nanocomposites); 81.16.Dn (self-assembly); 74.25.nd (Raman and optical spectroscopy).

Urchin-like Au-nanoparticles@Ag-nanohemisphere arrays as active SERS-substrates for recognition of PCBs

Large-scale ordered urchin-like Au-nanoparticles decorated Ag-nanohemisphere nanodot arrays show highly active surface-enhanced Raman scattering effect for rapid recognition of PCB-3.