Facile strain analysis of largely bending films by a surface-labelled grating method

Bending creep behaviour of various polymer films analysed by surface strain measurement

Understanding the temporal bending deformation of polymer films is key to designing mechanically durable flexible electronic devices. However, such creep behaviour under persistent bending remains unclear due to a lack of precise and accurate bending strain analysis methods. Herein, we quantitatively analysed the bending creep behaviour of various polymeric films using our developed strain measurement method that can precisely measure surface strain from optical diffraction. The surface strain measurement reveals that bending creep deformation differs depending on the polymer structure. The four-element Burgers model was employed to model the temporal strain increase on the bending surface successfully. By fitting the four-element model to the time course of the measured surface strain, we found that each polymer film has a different threshold surface strain for the appearance of bending creep deformation. Such disparity in the bending creep behaviour can be explained by the difference in strain energy density between the polymer films and their elastic model; polymer films with a small strain energy density difference show small bending creep deformation. The results obtained in this study contribute to the elucidation of the bending creep behaviour of polymer films and the development of flexible electronic devices operated under persistent bending.

Quantitative analysis of bending hysteresis by real-time monitoring of curvature in flexible polymeric films

Flexibility, viscoelasticity and stress-strain relation in bending polymeric films are key factors in designing mechanically durable flexible electronic devices and soft robots. However, bending hysteresis, which appears as a precursor phenomenon of fracture and fatigue, remains unclear; no one quantitatively evaluated a bending curvature causing hysteresis. Herein, we report the bending hysteresis of polymeric films used as common substrates in flexible electronics by precisely monitoring bending curvatures. By real-time measuring curvatures of films upon bending and subsequent unbending, we have successfully determined the curvatures that cause the hysteresis. These curvatures also depend on a film thickness. Furthermore, we revealed that the occurrence of bending hysteresis is explained by bending strains that have a nonlinear relation with internal stresses. This enables us to predict strain limits that cause the bending hysteresis, based on a stress-strain curve of polymeric films.

Rigid Tightly Packed Amino Acid Crystals as Functional Supramolecular Materials

The formation of ordered nanostructures by metabolites is gaining increased interest due to the simplicity of the building blocks and their natural occurrence. Specifically, aromatic amino acids possess the ability to form ordered supramolecular interactions due to their limited solubility in aqueous solution. Unexpectedly, l-tyrosine (l-Tyr) is almost 2 orders of magnitude less soluble in water compared to l-phenylalanine (l-Phe). However, the underlying mechanism is not fully understood as l-Tyr is more polar. Here, we explore the utilization of insoluble tyrosine assemblies for technological applications and their molecular basis by manipulating the basic building blocks of tightly packed dimers. We show that the addition of an amyloid inhibition agent increases l-Tyr solubility due to the disruption of the dimer formation. The molecular organization grants the l-Tyr crystal higher thermal stability and mechanical properties between three amino acids. Additionally, l-Tyr crystals are shown to generate high and stable piezoelectric power outputs under mechanical pressure in a sandwich device. By incorporating the rigid l-Tyr crystals into a soft polymer, a mechano-responsive bending composite was fabricated. Furthermore, the l-Tyr crystalline needles exhibit an active photowaveguiding property, making them promising candidates for the generation of photonic biomaterial-based devices. The present work exemplifies a feasible strategy to explore physical properties of supramolecular self-assemblies comprises minimalistic naturally occurring building blocks and their applications in energy harvesting, photonic devices, stretchable electronics, and soft robotics.

Design of Collective Motions from Synthetic Molecular Switches, Rotors, and Motors

Precise control over molecular movement is of fundamental and practical importance in physics, biology, and chemistry. At nanoscale, the peculiar functioning principles and the synthesis of individual molecular actuators and machines has been the subject of intense investigations and debates over the past 60 years. In this review, we focus on the design of collective motions that are achieved by integrating, in space and time, several or many of these individual mechanical units together. In particular, we provide an in-depth look at the intermolecular couplings used to physically connect a number of artificial mechanically active molecular units such as photochromic molecular switches, nanomachines based on mechanical bonds, molecular rotors, and light-powered rotary motors. We highlight the various functioning principles that can lead to their collective motion at various length scales. We also emphasize how their synchronized, or desynchronized, mechanical behavior can lead to emerging functional properties and to their implementation into new active devices and materials.

Fast-switching optically isotropic liquid crystal nano-droplets with improved depolarization and Kerr effect by doping high k nanoparticles

We proposed and analyzed an optically isotropic nano-droplet liquid crystal (LC) doped with high k nanoparticles (NPs), exhibiting enhanced Kerr effects, which could be operated with reduced driving voltages. For enhancing the contrast ratio together with the light efficiencies, the LC droplet sizes were adjusted to be shorter than the wavelength of visible light to reduce depolarization effects by optical scattering of the LC droplets. Based on the optical analysis of the depolarization effects, the influence of the relationship between the LC droplet size and the NP doping ratio on the Kerr effect change was investigated.

Thermo-, photo-, and mechano-responsive liquid crystal networks enable tunable photonic crystals

Tunable photonic crystals exhibiting optical properties that respond reversibly to external stimuli have been developed using liquid crystal networks (LCNs) and liquid crystal elastomers (LCEs). These tunable photonic crystals possess an inverse opal structure and are photo-responsive, but circumvent the usual requirement to contain dye molecules in the structure that often limit their applicability and cause optical degradation. Herein, we report tunable photonic crystal films that reversibly tune the reflection peak wavelength under thermo-, photo- and mechano-stimuli, through bilayering a stimuli-responsive LCN including azobenzene units with a colourless inverse opal film composed of non-responsive, flexible durable polymers. By mechanically deforming the azobenzene containing LCN via various stimuli, the reflection peak wavelength from the bilayered film assembly could be shifted on demand. We confirm that the reflection peak shift occurs due to the deformation of the stimuli-responsive layer propagating towards and into the inverse opal layer to change its shape in response, and this shift behaviour is repeatable without optical degradation.

Shape-Shifting Azo Dye Polymers: Towards Sunlight-Driven Molecular Devices

The development of stimuli-responsive polymers is among the key goals of modern materials science. The structure and properties of such switchable materials can be designed to be controlled via various stimuli, among which light is frequently the most powerful trigger. Light is a gentle energy source that can target materials remotely, and with extremely high spatial and temporal resolution easily and cheaply. Reversible light-control over molecular mechanical properties in particular has in recent years attracted great interest due to potential applications as optical-to-mechanical conversion actuators and 'devices', enabling 'molecular robotic machines'. In this review, some recent examples and emerging trends in this exciting field of research are highlighted, covering a wide variety of polymer hosts that contain azobenzene photo-reversible switches. It is hoped that this review will help stimulate more interest towards the development of light-reversible materials for energy harvesting and conversion, and their successful incorporation into a wide variety of current and future high-tech applications in devices.

Suppressing molecular vibrations in organic semiconductors by inducing strain

Organic molecular semiconductors are solution processable, enabling the growth of large-area single-crystal semiconductors. Improving the performance of organic semiconductor devices by increasing the charge mobility is an ongoing quest, which calls for novel molecular and material design, and improved processing conditions. Here we show a method to increase the charge mobility in organic single-crystal field-effect transistors, by taking advantage of the inherent softness of organic semiconductors. We compress the crystal lattice uniaxially by bending the flexible devices, leading to an improved charge transport. The mobility increases from 9.7 to 16.5 cm² V⁻¹ s⁻¹ by 70% under 3% strain. In-depth analysis indicates that compressing the crystal structure directly restricts the vibration of the molecules, thus suppresses dynamic disorder, a unique mechanism in organic semiconductors. Since strain can be easily induced during the fabrication process, we expect our method to be exploited to build high-performance organic devices.

The mobility of organic semiconductors can be tuned by modifying their chemical composition or crystalline properties. Here, the authors show that bending organic single crystals increases their field effect transistor mobility due to restrained molecular vibrations and subsequently reduced dynamic disorder.

Vectorial strain gauge method using single flexible orthogonal polydimethylsiloxane gratings

A vectorial strain gauge method using a single sensing element is reported based on the double-sided polydimethylsiloxane (PDMS) Fraunhofer diffraction gratings structures. Using O₂ plasma treatment steps, orthogonal wrinkled gratings were fabricated on both sides of a pre-strained PDMS film. Diffracted laser spots from this structure have been used to experimentally demonstrate, that any applied strain can be quantitatively characterized in both the x and y directions with an error of less than 0.6% and with a gauge factor of approximately 10. This simple and low cost technology which is completely different from the traditional vectorial strain gauge method, can be applied to surface vectorial strain measurement and multi-axis integrated mechanical sensors.

A comparative study of photoinduced deformation in azobenzene containing polymer films

In this paper two groups supporting different views on the mechanism of light induced polymer deformation argue about the respective underlying theoretical conceptions, in order to bring this interesting debate to the attention of the scientific community. The group of Prof. Nicolae Hurduc supports the model claiming that the cyclic isomerization of azobenzenes may cause an athermal transition of the glassy azobenzene containing polymer into a fluid state, the so-called photo-fluidization concept. This concept is quite convenient for an intuitive understanding of the deformation process as an anisotropic flow of the polymer material. The group of Prof. Svetlana Santer supports the re-orientational model where the mass-transport of the polymer material accomplished during polymer deformation is stated to be generated by the light-induced re-orientation of the azobenzene side chains and as a consequence of the polymer backbone that in turn results in local mechanical stress, which is enough to irreversibly deform an azobenzene containing material even in the glassy state. For the debate we chose three polymers differing in the glass transition temperature, 32 °C, 87 °C and 95 °C, representing extreme cases of flexible and rigid materials. Polymer film deformation occurring during irradiation with different interference patterns is recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. We also demonstrated the unique behaviour of azobenzene containing polymeric films to switch the topography in situ and reversibly by changing the irradiation conditions. We discuss the results of reversible deformation of three polymers induced by irradiation with intensity (IIP) and polarization (PIP) interference patterns, and the light of homogeneous intensity in terms of two approaches: the re-orientational and the photo-fluidization concepts. Both agree in that the formation of opto-mechanically induced stresses is a necessary prerequisite for the process of deformation. Using this argument, the deformation process can be characterized either as a flow or mass transport.