Nanostructured organosilicon luminophores and their application in highly efficient plastic scintillators

Importance of Rose Bengal Loaded with Nanoparticles for Anti-Cancer Photodynamic Therapy

Rose Bengal (RB) is a photosensitizer (PS) used in anti-cancer and anti-bacterial photodynamic therapy (PDT). The specific excitation of this PS allows the production of singlet oxygen and oxygen reactive species that kill bacteria and tumor cells. In this review, we summarize the history of the use of RB as a PS coupled by chemical or physical means to nanoparticles (NPs). The studies are divided into PDT and PDT excited by X-rays (X-PDT), and subdivided on the basis of NP type. On the basis of the papers examined, it can be noted that RB used as a PS shows remarkable cytotoxicity under the effect of light, and RB loaded onto NPs is an excellent candidate for nanomedical applications in PDT and X-PDT.

Progress in Fast and Red Plastic Scintillators

Radiological detection where Cherenkov residual background can be prominent requires scintillators with increased emission wavelength. Cherenkov residual background precludes the use of UV-emitting sensors such as plastic scintillators. However, the literature is scarce in red-emitting plastic scintillators and only one commercial scintillator is currently available (BC-430, from Saint-Gobain Crystals and Detectors). In addition, X-ray imaging or time-of-flight positron emission tomography (ToF-PET) applications are also demanding on this type (color) of scintillators, but such applications also require that the material displays a fast response, which is not particularly the case for BC-430. We present herein our latest developments in the preparation and characterization of fast and red plastic scintillators for this application. Here, ‘fast’ means nanosecond range decay time and ‘red’ is an emission wavelength shifted towards more than 550 nm. At first, the strategy to the preparation of such material is explained by decomposing the scintillator to fundamental elements. Each stage is then optimized in terms of decay time response, then the elemental bricks are arranged to give plastic scintillator formulations that are compatible with the abovementioned characteristics. The results are compared with the red-emissive BC-430 commercial plastic, and the ultra-fast, violet-emitting BC-422Q 1% plastic. In particular, the first-time use of trans-4-dimethylamino-4′-nitrostilbene in the scintillation field as a red wavelength shifter allowed preparing plastic scintillators with the following properties: λemmax 554 nm, photoluminescence decay time 4.2 ns, and light output ≈ 6100 ph/MeV. This means a scintillator almost as bright as BC-430 but at least three times faster. This new sensor might provide useful properties for nuclear instrumentation.

Study of the fast calorimeter prototype for the Super Charm-Tau Factory

Modern e+e− factories with high luminosity require fast response time of the detector subsystems to collect the data efficiently and suppress severe beam background. The prototype of the electromagnetic calorimeter based on the counter made of pure CsI crystal, novel wavelength shifter with nanostructured organosilicon luminophores and avalanche photodiodes Hamamatsu S8664-55 is discussed. Results of the measurement of the basic characteristics of the counter are presented.

Directional emission of plastic luminescent films using photonic crystals fabricated by soft-X-ray interference lithography and reactive ion etching

In this report, a novel method to prepare photonic crystals based on the combination of soft-X-ray interference lithography (XIL) and reactive ion etching (RIE) with a bi-layer photoresist system was developed. XIL can be utilized to prepare periodic structures with high efficiency but the depth of etch is limited due to the strong absorption of photoresist for soft-X-ray. Based on the pattern prepared by XIL, RIE can be utilized to further etch a second layer of photoresist, so that one can obtain a large depth of etch. Controlling the dispersion relation of the prepared photonic crystals, strongly directional emission of plastic luminescent films was demonstrated. A wavelength-integrated enhancement of 2.64-folds enhancement in the range of 420 to 440 nm in the normal direction was obtained. Guided-mode resonance and Fabry-Perot resonance could be the critical factors to control the directional emission. Devices based on directional emission films have a variety of applications in such as detectors, optical communication and display screens.

Boron-rich benzene and pyrene derivatives for the detection of thermal neutrons

A synthetic methodology is developed to generate boron rich aromatic small molecules based on benzene and pyrene moieties for the detection of thermal neutrons. The prepared aromatic compounds have a relatively high boron content up to 7.4 wt%, which is important for application in neutron detection as ¹⁰B (20% of natural abundance boron) has a large neutron induced reaction cross-section. This is demonstrated by preparing blends of the synthesized molecules with fluorescent dopants in poly(vinyltoluene) matrices resulting in comparable scintillation light output and neutron capture as state-of-the art commercial scintillators, but with the advantage of much lower cost. The boron-rich benzene and pyrene derivatives are prepared by Suzuki conditions using both microwave and traditional heating, affording yields of 40–93%. This new procedure is simple and straightforward, and has the potential to be scaled up.

Dextran-coated fluorapatite crystals doped with Yb3+/Ho3+ for labeling and tracking chondrogenic differentiation of bone marrow mesenchymal stem cells in vitro and in vivo

Upconversion fluorescent nanoparticles are becoming more widely used as imaging contrast agents, owing to their high resolution and penetration depth, and avoidance of tissue auto-fluorescence and photodamage to cells. Here, we synthesized upconversion fluorescent crystals from rare-earth Yb3+ and Ho3+ co-doped fluorapatite (FA:Yb3+/Ho3+) suitable for long-term tracking and monitoring cartilage development (chondrogenesis) in bone marrow mesenchymal stem cells (BMSCs) in vitro and in vivo. We initially determined the structure, morphology and luminescence of the products using X-ray powder diffraction, transmission electron microscopy and two-photon confocal microscopy. When excited at 980 nm, FA:Yb3+/Ho3+ crystals exhibited distinct upconversion fluorescence peaks at 543 nm and 654 nm. We then conjugated FA:Yb3+/Ho3+ crystals with dextran to enhance hydrophilicity, biocompatibility and cell penetration. Next, we employed the dextran-coated FA:Yb3+/Ho3+ crystals in labeling and tracking chondrogenic differentiation processes in BMSCs stably expressing green fluorescent protein (BMSCsGFP) in vitro and in vivo. Labeled BMSCsGFP were shown to reproducibly exhibit chondrogenic differentiation potential in RT-PCR analysis, histological assessment and immunohistochemistry. We observed continuous luminescence from the FA:Yb3+/Ho3+ upconversion crystals at 4 weeks and 12 weeks post transplantation in BMSCsGFP, while GFP fluorescence in both control and crystal-treated groups significantly decreased at 12 weeks after BMSCsGFP transplantation. We therefore demonstrate the high biocompatibility and stability of FA:Yb3+/Ho3+ crystals in tracking and monitoring BMSCs chondrogenesis in vitro and in vivo, highlighting their excellent cell labeling potential in cartilage tissue engineering.