Surface enhanced electrochemiluminescence of Ru(bpy)3(2+)

Electrochemiluminescence detection of diazinon in vegetables based on the synergistic interaction of WO3-x dots with Au@SiO2 nanocapsules

In this work, a simple synthesis of low-toxicity transition metal material of WO3-x dots was used as a co-reactant with Au@SiO2 as a core-shell material and a signal amplification factor to collaboratively promote Ru(bpy)32+ electrochemiluminescence (ECL) for the construction of a highly sensitive aptasensor for the detection of diazinon (DZN) in vegetables. Electrodes modified with multi-walled carbon nanotubes-chitosan composite membranes (MWCNTs-CS) were used to load and immobilize more Ru(bpy)32+.can load more Ru(bpy)32+. WO3-x dots synthesized by a simple method showed excellent ECL efficiency as a novel co-reactant for Ru(bpy)32+. Under optimized conditions, this aptasensor for DZN has a wide detection range (10 pg mL-1 - 1 μg mL-1.) and a low detection limit (0.0197 ng L-1). The aptasensor has shown good results in the analysis of real samples in the experiment. This work provides a new approach to the construction of a novel electrochemiluminescence sensor for the detection of pesticides.

The ECL enhancement of MBene QDs with nanoparticle-on-mirror structure for sensitive detection of exosomal miRNA

Thyroid cancer is the most prevalent endocrine malignancy. The development of sensitive and reliable methods to detect the thyroid cancer is the currently urgent requirement. Herein, we developed an electrochemiluminescence (ECL) biosensor based on MBene derivative quantum dots (MoB QDs) and Ag NP-on-mirror (NPoM) nanocavity structure. On the one hand, MBene QDs as a novel luminescent material in the ECL process was reported for the first time, which can react with H2O2 as co-reactant. On the other hand, the NPoM nanostructure was successfully constructed with the Ag mirror and Ag NPs to provide highly localized hot spots. The NPoM structure had high degree of light field confinement and electromagnetic field enhancement, which can amplify the ECL signal as the signal modulator. Therefore, the synergistic effect of the nanocavity and localized surface plasmon resonance (LSPR) mode in the NPoM facilitated the enhancement of the ECL signal of MoB QDs over 21.7 times. Subsequently, the proposed ECL biosensing system was employed to analyze the expression level of miRNA-222-3p in the thyroid cancer exosome. The results indicated the relative association between miRNA-222-3p and BRAFV600E mutation. The MoB QDs/NPoM biosensor displayed the ideal potential in assessing thyroid cancer progression for advancing clinical diagnosis applications.

Redox-mediated electrochemiluminescence enhancement for bead-based immunoassay

Electrochemiluminescence (ECL) is a highly sensitive mode of detection utilised in commercialised bead-based immunoassays. Recently, the introduction of a freely diffusing water-soluble Ir(iii) complex was demonstrated to enhance the ECL emission of [Ru(bpy)3]2+ labels anchored to microbeads, but a comprehensive investigation of the proposed 'redox-mediated' mechanism was not carried out. In this work, we select three different water-soluble Ir(iii) complexes by virtue of their photophysical and electrochemical properties in comparison with those of the [Ru(bpy)3]2+ luminophore and the TPrA co-reactant. A systematic investigation of the influence of each Ir(iii) complex on the emission of the Ru(ii) labels on single beads by ECL microscopy revealed that the heterogeneous ECL can be finely tuned and either enhanced up to 107% or lowered by 75%. The variation of the [Ru(bpy)3]2+ ECL emission was correlated to the properties of each Ir(iii)-based mediator, which enabled us to decipher the mechanism of interaction and define guidelines for the future design of novel Ir(iii) complexes to further enhance the ECL emission of bead-based immunoassays. Ultimately, we showcase the potential of this technology for practical sample analysis in commercial instruments by assessing the enhancement of the collective ECL intensity from a bead-based system.

High -Sensitive Detection of Malachite Green Based on Surface-Enhanced Electrochemiluminescence

This article introduces a novel unlabeled surface-enhanced electrochemiluminescence (SEECL) sensor for malachite green (MG) detection. The SEECL sensor was prepared by modifying the Ru(bpy)32+ doped gold-SiO2 core-shell nanocomposites (Au@SiO2-Ru(bpy)32+) on the gold electrode. Ru(bpy)32+ of nanocomposites can not only emit electrochemiluminescence (ECL) with electrochemical reaction, but also induce the local surface plasmon resonance (LSPR) of gold core. That is beneficial to enhance the ECL signa of sensor. However, in the existence of MG, the luminescence of sensor would be quenched by the fluorescence resonance energy transfer (FRET) between MG and Ru(bpy)32+. In this paper, both fluorescence and ECL of the Au@SiO2-Ru(bpy)32+ were investigated for MG detection. And the results show that the SEECL sensor has high sensitive to MG. Under the optimal experimental conditions, the minimum detection concentration could be achieved about 1.0 nM of MG, which fully meets the China national standard detection requirements of veterinary drug residue in seafood.

Bismuth Nano-Nest/Ti3CN Quantum Dot-Based Surface Plasmon Coupling Electrochemiluminescence Sensor for Ascites miRNA-421 Detection

In this study, a novel surface plasmon-coupled electrochemiluminescence (SPC-ECL) biosensor was developed based on bismuth nano-nest and Ti₃CN quantum dots (Ti₃CN QDs). First, MXene derivative QDs (Ti₃CN QDs) with excellent luminescence performance were prepared as the ECL luminescent. The N doping in Ti₃CN QDs can effectively improve the luminescence performance and catalytic activity. Therefore, the luminescence performance of QDs has been effectively improved. Furthermore, the bismuth nano-nest structure with a strong localized surface plasmon resonance effect has been designed as the sensing interface via the electrochemical deposition method. It was worth noticed that the morphology of bismuth nanomaterials can be controlled effectively on the electrode surface by the step potential method. Due to the abundant surface plasmon hot spots generated between the bismuth nano-nests, the isotropic ECL signal of Ti₃CN QDs can be not only significantly enhanced by 5.8 times but also converted into polarized emission. Finally, the bismuth nano-nest/Ti₃CN QD-based SPC-ECL sensor was used to quantify miRNA-421 in the range of 1 fM to 10 nM. The biosensor has been successfully used for miRNA in ascites samples from gastric cancer patients, which indicated that the SPC-ECL sensor developed in this study has great potential for clinical analysis.

Plasmon-Enhanced Electrochemiluminescence at the Single-Nanoparticle Level

Plasmon-enhanced electrochemiluminescence (ECL) at the single-nanoparticle (NP) level was investigated by ECL microscopy. The Au NPs were assembled into an ordered array, providing a high-throughput platform that can easily locate each NP in sequential characterizations. A strong dependence of ECL intensity on Au NP configurations was observed. We demonstrate for the first time that at the single-particle level, the ECL of Ru(bpy)₃ ²⁺ -TPrA was majorly quenched by small Au NPs (<40 nm), while enhanced by large Au ones (>80 nm) due to the localized surface plasmon resonance (LSPR). Notably, the ECL intensity was further increased by the coupling effect of neighboring Au NPs. Finite Difference Time Domain (FDTD) simulations conformed well with the experimental results. This plasmon enhanced ECL microscopy for arrayed single NPs provides a reliable tool for screening electrocatalytic activity at a single particle.

Shell-Isolated Nanoparticle-Enhanced Electrochemiluminescence

Enhanced electrochemiluminescence (ECL) aims to promote higher sensitivity and obtain better detection limit. The core-shell nanostructures, owing to unique surface plasmon resonance (SPR) enabling distance-dependent strong localized electromagnetic field, have attracted rising attention in enhanced ECL research and application. However, the present structures usually with porous shell involve electrocatalytic activity from the metal core and adsorption effect from the shell, which interfere with practical SPR enhancement contribution to ECL signal. Herein, to exclude the interference and unveil exact SPR-enhanced effect, shell-isolated nanoparticles (SHINs) whose shell gets thicker and becomes pinhole-free are developed by modifying pH value and particles concentration. Furthermore, allowing for the distribution of hotspots and stronger enhancement, excitation intensity and ECL reaction layer thickness are mainly investigated, and several types of SHINs-enhanced ECL platforms are prepared to fabricate distinct hotspot distribution via electrostatic attraction (submonolayer) and a layer-by-layer deposition method (monolayer). Consequently, the strongest enhancement up to ≈250-fold is achieved by monolayer SHINs with 10 nm shell, and the platform is applied in a "turn-off" mode sensing for dopamine. The platform provides new guidelines to shell preparation, interface engineering and hotspots fabrication for superior ECL enhancement and analytical application with high performance.

Electrochemiluminescence biosensor for determination of lead(II) ions using signal amplification by Au@SiO2 and tripropylamine-endonuclease assisted cycling process

MXene@Au as the base and Au@SiO₂ as signal amplification factor were used for constructing an ultrasensitive "on-off" electrochemiluminescence (ECL) biosensor for the detection of Pb²⁺ in water. The use of MXene@Au composite provided a good interface environment for the loading of tris(2,2-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) on the electrode. Based on resonance energy transfer, the Au (core) SiO₂ (shell) (Au@SiO₂) nanoparticles stimulate electron transport and promote tripropylamine (TPrA) oxidation. The luminescence effect of Au@SiO₂ was five times that of AuNPs and SiO₂ nanomaterials alone, and the ECL intensity was greatly improved. In addition, Pb²⁺ activated the aptamer to exert its endonuclease activity, which realized the signal cycle amplification in the process of Pb²⁺ detection. When Pb²⁺ was added, the ECL signal weakened, and the Pb²⁺ concentration was detected according to the decreased ECL intensity. Under optimized experimental conditions, this aptamer sensor for Pb²⁺ has a wide detection range (0.1 to 1 × 10⁶ ng L^-1) and a low detection limit (0.059 ng L^-1). The relative standard deviation (RSD) of the sensor is 0.39-0.99%, and the recovery of spiked standard is between 90.00 and 125.70%. The sensor shows good selectivity and high sensitivity in actual water sample analysis. This signal amplification strategy possibly provides a new method for the detection of other heavy metal ions and small molecules.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Plasmon-Enhanced Nitrogen Vacancy-Rich Carbon Nitride Electrochemiluminescence Aptasensor for Highly Sensitive Detection of miRNA

The development of biosensors for biologically important substances with ultralow content such as microRNA is of great significance. Herein, a novel surface plasmon-enhanced electrogenerated chemiluminescence-based aptasensor was developed for ultrasensitive sensing of microRNA by using nitrogen vacancy-rich carbon nitride nanosheets as effective luminophores and gold nanoparticles as plasmonic sources. The introduction of nitrogen vacancies improved the electrochemiluminescence behavior due to improved conductance and electrogenerated chemiluminescence activity. The introduction of plasmonic gold nanoparticles increased the electrochemiluminescence signal intensity by more than eightfold. The developed surface plasmon-enhanced electrogenerated chemiluminescence aptasensor exhibited good selectivity, ultrasensitivity, excellent stability, and reproducibility for the determination of microRNA-133a, with a dynamic linear range of 1 aM to 100 pM and a limit of detection about 0.87 aM. Moreover, the surface plasmon-enhanced electrogenerated chemiluminescence sensor obtained a good recovery when detecting the content of microRNA in actual serum.

Tuning Electrogenerated Chemiluminescence Intensity Enhancement Using Hexagonal Lattice Arrays of Gold Nanodisks

Electrogenerated chemiluminescence (ECL) microscopy shows promise as a technique for mapping chemical reactions on single nanoparticles. The technique's spatial resolution is limited by the quantum yield of the emission and the diffusive nature of the ECL process. To improve signal intensity, ECL dyes have been coupled with plasmonic nanoparticles, which act as nanoantennas. Here, we characterize the optical properties of hexagonal arrays of gold nanodisks and how they impact the enhancement of ECL from the coreaction of tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate and tripropylamine. We find that varying the lattice spacing results in a 23-fold enhancement of ECL intensity because of increased dye-array near-field coupling as modeled using finite element method simulations.

Plasmon-enhanced quantum dots electrochemiluminescence aptasensor for selective and sensitive detection of cardiac troponin I

The development of highly sensitive electrochemiluminescence (ECL) immunosensors by using functional nanoparticles as signal amplifiers is a solution towards sensitive determination of many low concentration disease biomarkers. Herein, a sensitive aptamer-based, sandwich-type surface plasmon enhanced electrochemiluminescence (SPEECL) immunosensor was demonstrated for the detection of cardiac troponin I (cTnI), by means of aptamer conjugated CdS QDs and AuNPs as ECL luminophores and plasmon sources, respectively, in which Tro4 aptamer was used as a capture probe for cTnI and Tro6 aptamer as a detecting probe. The signal of the developed SPEECL system showed ~ 5-fold increment as compared to that of without AuNPs. Using this ECL platform for the detection of cTnI, a linear range and the limit of detection (LOD) were found to be 1 fg/mL - 10 ng/mL and 0.75 fg/mL, respectively.

A surface-enhanced electrochemiluminescence sensor based on Au-SiO2 core–shell nanocomposites doped with Ru(bpy)32+ for the ultrasensitive detection of prostate-specific antigen in human serum

This study reports a surface-enhanced electrochemiluminescence (SEECL) sensor for the ultrasensitive detection of prostate-specific antigen (PSA) in human serum.

Nanoelectrode-emitter spectral overlap amplifies surface enhanced electrogenerated chemiluminescence

Electrogenerated chemiluminescence (ECL) is a promising technique for low concentration molecular detection. To improve the detection limit, plasmonic nanoparticles have been proposed as signal boosting antennas to amplify ECL. Previous ensemble studies have hinted that spectral overlap between the nanoparticle antenna and the ECL emitter may play a role in signal enhancement. Ensemble spectroscopy, however, cannot resolve heterogeneities arising from colloidal nanoparticle size and shape distributions, leading to an incomplete picture of the impact of spectral overlap. Here, we isolate the effect of nanoparticle-emitter spectral overlap for a model ECL system, coreaction of tris(2,2'-bipyridyl)dichlororuthenium(ii) hexahydrate and tripropylamine, at the single-particle level while minimizing other factors influencing ECL intensities. We found a 10-fold enhancement of ECL among 952 gold nanoparticles. This signal enhancement is attributed exclusively to spectral overlap between the nanoparticle and the emitter. Our study provides new mechanistic insight into plasmonic enhancement of ECL, creating opportunities for low concentration ECL sensing.

Nanoengineered Metasurface Immunosensor with over 1000-Fold Electrochemiluminescence Enhancement for Ultra-sensitive Bioassay

Enhancing electrochemiluminescence (ECL) with plasmonic materials is promising but still a long-standing barrier to improve its sensitivity for ultrasensitive bioassays, due to the lack of comprehensive understanding and effective strategies to fully utilize plasmonic effects for ECL enhancement. Herein, by insulating gold nanoparticles with silica shells (Au@SiO₂ NPs), and finely tuning their core/shell sizes and controlling interparticle spacing via assembling them into a dense nanomembrane, we develop a novel 2D metasurface. Due to well-controlled high density “hot spots” and 2D ordered arrangement of the unit NPs in the nanomembrane, the metasurfaced ECL electrode shows over 1,000-fold plasmonic ECL enhancement for the classical Ru(bpy)₃²⁺-tripropylamine system, which is two orders of magnitude higher than ever reported (<30-fold). Such fabricated ECL biosensor demonstrates superior detection performance for prostate-specific antigen with a detection limit of 3 fg mL⁻¹. Our results provide understanding of plasmonic effects for ECL enhancement and will benefit for biosensor construction for ultrasensitive bioassays.

•

A unique Au@SiO₂ NP-based 2D metamaterial was constructed

•

The plasmon effects were fully utilized to enhance ECL excitation

•

The as-fabricated metasurfaced ECL electrode shows over 1,000-fold enhancement

Plasmon-Enhanced Electrochemiluminescence of Silver Nanoclusters for microRNA Detection

Surface plasmon-enhanced electrochemiluminescence (SPEECL) with excellent sensitivity and simplicity has attracted increasing attention. In this work, we reported a novel SPEECL with DNA templated silver nanoclusters (DNA-AgNCs) as ECL emitters and gold nanoparticles (AuNPs) as localized surface plasmon resonance (LSPR) source. The SPEECL with DNA-AgNCs as ECL luminophores possessed low toxicity and avoided the labeling process, which is favorable for its further sensing application. In addition, by investigation of the SPEECL under different distances between DNA-AgNCs and AuNPs, it was demonstrated that the SPEECL was distance dependent. Meanwhile, the SPEECL intensity changed with the sizes and interdistance of AuNPs under different electrodeposition time. Furthermore, by the combination of a cyclic amplification process with enzyme-free catalytic hairpin DNA, a sensitive SPEECL biosensor was proposed for the detection of microRNA (miRNA-21) successfully with a wide linear range from 1 aM to 10⁴ fM and a relatively low detection limit of 0.96 aM, which was applied in the detection of miRNA-21 in real samples with satisfying results. This novel, simple, sensitive, and selective SPEECL with label-free and low-toxic ECL emitters displayed a great potential for bioassay application.

Dual Enhanced Electrochemiluminescence of Aminated Au@SiO2/CdS Quantum Dot Superstructures: Electromagnetic Field Enhancement and Chemical Enhancement

This paper reports dual enhanced electrochemiluminescence (ECL) of CdS quantum dot (QD)-decorated aminated Au@SiO₂ core/shell (Au@SiO₂-NH₂/CdS) superstructures. A maximum ECL emission of the Au@SiO₂-NH₂/CdS superstructures (Au core, ca. 55 nm) with a silica shell of 38 nm was 35-fold stronger than that of the counterparts (containing neither Au cores nor amino groups) with H₂O₂ as a coreactant. The fold of ECL enhancement is the largest, and the optical path of maximum ECL enhancement is the longest reported so far. The larger the Au cores in the superstructures, the stronger the ECL emission of CdS QDs was. Two types of ECL enhancement mechanisms were clearly proposed for the dual enhanced ECL of the Au@SiO₂-NH₂/CdS superstructures. One was the electromagnetic field enhancement induced by localized surface plasmon resonance of Au cores, and the other was the chemical enhancement from amino groups modified on the silica surface involved in the ECL process in the assistance of H₂O₂. It is the first time to put forward the new concept of chemical enhanced ECL that was directly related to the participation of other chemicals, which caused a decrease in the difference in the redox potential between emitters and coreactants for the increase of their redox currents. The constructed ECL platform was demonstrated to have promising applications in highly sensitive detection of glutathione (GSH), and the response mechanism of GSH was also explored.

Construction of an ultrasensitive electrochemiluminescent aptasensor for ractopamine detection

An ultrasensitive ECL aptasensor was designed for ractopamine detection.

Cathodic electrochemiluminescence behaviour of MoS2 quantum dots and its biosensing of microRNA-21

The cathodic electrochemiluminescence (ECL) behaviour of nontoxic MoS2 quantum dots (QDs) was studied for the first time using potassium peroxydisulfate as the co-reactant. Ag-PAMAM NCs, serving as difunctional tags for quenching and enhancing ECL of MoS2-reduced graphene oxide composites, were introduced into the ECL detection system for signal amplification. By modulating the interparticle distance between MoS2 QDs and Ag-PAMAM NCs, the ECL quenching from resonance energy transfer and the ECL enhancement from surface plasma resonance were realized. Coupling the good ECL performance of MoS2 QDs with the excellent ECL quenching and enhancement effects of Ag-PAMAM NCs, a novel MoS2 QDs-based ECL biosensing platform for sensitive detection of microRNA-21 was achieved with a detection limit of 0.20 fmol L-1 (S/N = 3). This method was successfully applied to the determination of microRNA-21 in human serum samples with recoveries of 90.0-110.0%, suggesting great potential for its applications in biological and chemical analysis.

Surface-enhanced Raman spectroscopy: bottlenecks and future directions

This feature article discusses developmental bottleneck issues in surface Raman spectroscopy in its early stages and surface-enhanced Raman spectroscopy (SERS) in the past four decades and future perspectives.

Biological Molecules-Governed Plasmonic Nanoparticle Dimers with Tailored Optical Behaviors

Self-assembly opens new avenues to direct the organization of nanoparticles (NPs) into discrete structures with predefined configuration and association numbers. Plasmonic NP dimers provide a well-defined system for investigating the plasmonic coupling and electromagnetic (EM) interaction in arrays of NPs. The programmability and structural plasticity of biomolecules offers a convenient platform for constructing of NP dimers in a controllable way. Plasmonic coupling of NPs enables dimers to exhibit tunable optical properties, such as surface-enhanced Raman scattering (SERS), chirality, photoluminescence, and electrochemiluminescence (ECL) properties, which can be tailored by altering the biomolecules, the building blocks with distinct compositions, sizes and morphology, the interparticle distances, as well as the geometric configuration of the constituent NPs. An overview of recent developments in biological molecules-governed NP dimers, the tailored optical behaviors, and challenges in enhancing optical signals and proposing plasmonic biosensors are discussed in this Perspective.

Electrogenerated chemiluminescence of the tris(2,2′-bipyridine)ruthenium(ii)/aliphatic amine system: a universal effect of perchlorate salts

Simply adding perchlorate salts leads to enhanced Ru(bpy)₃²⁺ECL emission of different pathways by 1.5–6.6 times with a variety of aliphatic amines as coreactants in a wide pH range from pH 5 to 12.

Distance mediated electrochemiluminescence enhancement of CdS thin films induced by the plasmon coupling of gold nanoparticle dimers

Theoretical and experimental studies of plasmon enhanced electrochemiluminescence of CdS QDs by gold nanoparticle monomers and dimers.

Imaging Electrogenerated Chemiluminescence at Single Gold Nanowire Electrodes

We report electrogenerated chemiluminescence (ECL) generated at single gold nanowire electrodes supported on tin-doped indium oxide. Unlike other single nanoparticle electrochemical characterization techniques, ECL provides a massively parallel direct readout of electrochemical activity on individual nanoparticle electrodes without the need for extrinsic illumination or a scanning electrochemical probe. While ECL is not observed from as-purchased nanowires due to the surfactant layer, by removing the layer and coating the nanowires with a polymer blend, ECL from single nanowire electrodes is readily measured. With an increase in polymer thickness, an increase in ECL image quality and reproducibility over multiple redox cycles is observed. The polymer coating also provides a strategy for stabilizing gold nanoparticle electrodes against complete surface oxidation in aqueous environments.

Recent advances in electrochemiluminescence

The great success of electrochemiluminescence (ECL) for in vitro diagnosis (IVD) and its promising potential in light-emitting devices greatly promote recent ECL studies. More than 45% of ECL articles were published after 2010, and the first international meeting on ECL was held in Italy in 2014. This critical review discusses recent vibrant developments in ECL, and highlights novel ECL phenomena, such as wireless ECL devices, bipolar electrode-based ECL, light-emitting electrochemical swimmers, upconversion ECL, ECL resonance energy transfer, thermoresponsive ECL, ECL using shape-controlled nanocrystals, and ECL as an ion-selective electrode photonic reporter, a paper-based microchip, and a self-powered microfluidic ECL platform. We also comment on the latest progress in bioassays, light-emitting devices and, the computational approach for the ECL mechanism study. Finally, perspectives and key challenges in the near future are addressed (198 references).

A novel chiral electrochemiluminescence sensor that can discriminate proline enantiomers

A chiral stereoselective electrochemiluminescence (ECL) sensor was constructed by using Ru–AuNPs and β-CD–rGO composites to discriminate proline enantiomers.