Encapsulation of S/SWNT with PANI web for enhanced rate and cycle performance in lithium sulfur batteries

Surface-Functionalized Separator for Stable and Reliable Lithium Metal Batteries: A Review

Metallic Li has caught the attention of researchers studying future anodes for next-generation batteries, owing to its attractive properties: high theoretical capacity, highly negative standard potential, and very low density. However, inevitable issues, such as inhomogeneous Li deposition/dissolution and poor Coulombic efficiency, hinder the pragmatic use of Li anodes for commercial rechargeable batteries. As one of viable strategies, the surface functionalization of polymer separators has recently drawn significant attention from industries and academics to tackle the inherent issues of metallic Li anodes. In this article, separator-coating materials are classified into five or six categories to give a general guideline for fabricating functional separators compatible with post-lithium-ion batteries. The overall research trends and outlook for surface-functionalized separators are reviewed.

Constructing a LiPAA interface layer: a new strategy to suppress polysulfide migration and facilitate Li+ transport for high-performance flexible Li-S batteries

Despite many recent attempts to restrict it, the dissolution and diffusion of polysulfides, leading to inferior cycling performance, is still the main bottleneck hindering commercialization of the Li-S battery. Herein, a new strategy of using lithium polyacrylate (LiPAA) to clad multiwalled carbon nanotube/sulfur (MWNT/S) composites as the interface layer for an MWNT/S/LiPAA cathode was proposed, not only to suppress polysulfide migration through physical encapsulation and chemical adsorption, but also to facilitate Li⁺ diffusion during the charge/discharge process. Attributed to these functions of LiPAA, MWNT/S/LiPAA exhibited a rate capability and cycling performance superior to those of MWNT/S and MWNT/S/PAA. Moreover, thanks to the introduction of LiPAA, the MWNT/S/LiPAA was endowed with robust mechanical properties, making it suitable for a flexible cathode in a flexible Li-S battery with stable output under deformation. This work could open up a promising way to suppress polysulfide migration for high-performance flexible Li-S batteries.

Application Progress of Polyaniline, Polypyrrole and Polythiophene in Lithium-Sulfur Batteries

With the urgent requirement for high-performance rechargeable Li-S batteries, besides various carbon materials and metal compounds, lots of conducting polymers have been developed and used as components in Li-S batteries. In this review, the synthesis of polyaniline (PANI), polypyrrole (PPy) and polythiophene (PTh) is introduced briefly. Then, the application progress of the three conducting polymers is summarized according to the function in Li-S batteries, including coating layers, conductive hosts, sulfur-containing compounds, separator modifier/functional interlayer, binder and current collector. Finally, according to the current problems of conducting polymers, some practical strategies and potential research directions are put forward. We expect that this review will provide novel design ideas to develop conducting polymer-containing high-performance Li-S batteries.

Surface Functionalization of Carbon Architecture with Nano-MnO2 for Effective Polysulfide Confinement in Lithium-Sulfur Batteries

Li-S batteries have received tremendous attention owing to their high theoretical capacity (1672 mA h g^-1 ), sulfur abundance, and low cost. However, main systemic issues, associated with polysulfide shuttling and low Coulombic efficiency, hinder the practical use of the sulfur electrode in commercial batteries. Herein, we demonstrate an effective strategy of decorating nano-MnO₂ (less than 10 wt %) onto the sulfur reservoir to capture the out-diffused polysulfides through chemical interaction and thereby improve the electrochemical performance of the sulfur electrode without increasing the mass burden of total battery configuration. Pistachio shell-derived sustainable carbon (PC) was employed as effective sulfur containers owing to its structural characteristics (interconnected macro channels and micropores). With the aids of the structural benefits of the PC scaffold and the uniform decoration of nano-MnO₂ , polysulfide shuttling was significantly suppressed and the cycling performance of the sulfur cathode was dramatically improved over 250 cycles.

Toward High-Performance Lithium-Sulfur Batteries: Upcycling of LDPE Plastic into Sulfonated Carbon Scaffold via Microwave-Promoted Sulfonation

Lithium-sulfur batteries were intensively explored during the last few decades as next-generation batteries owing to their high energy density (2600 Wh kg^-1) and effective cost benefit. However, systemic challenges, mainly associated with polysulfide shuttling effect and low Coulombic efficiency, plague the practical utilization of sulfur cathode electrodes in the battery market. To address the aforementioned issues, many approaches have been investigated by tailoring the surface characteristics and porosities of carbon scaffold. In this study, we first present an effective strategy of preparing porous sulfonated carbon (PSC) from low-density polyethylene (LDPE) plastic via microwave-promoted sulfonation. Microwave process not only boosts the sulfonation reaction of LDPE but also induces huge amounts of pores within the sulfonated LDPE plastic. When a PSC layer was utilized as an interlayer in lithium-sulfur batteries, the sulfur cathode delivered an improved capacity of 776 mAh g^-1 at 0.5C and an excellent cycle retention of 79% over 200 cycles. These are mainly attributed to two materialistic benefits of PSC: (a) porous structure with high surface area and (b) negatively charged conductive scaffold. These two characteristics not only facilitate the improved electrochemical kinetics but also effectively block the diffusion of polysulfides via Coulomb interaction.

Sulfur–hydrazine hydrate-based chemical synthesis of sulfur@graphene composite for lithium–sulfur batteries

A sulfur–hydrazine hydrate chemistry-based method is reported here to integrate the sulfur and N-doped reduced graphene oxide to obtain S@N-rGO composite with 76% sulfur. The as-obtained S@N-rGO composite displays a good rate capability and excellent stability.

Sepiolite/CNT/S@PANI composite with stable network structure for high performance lithium sulfur batteries

Composite materials with a stable network structure consisting of natural sepiolite (Sep) powders, carbon nanotubes (CNTs) and conductive polymer (PANI) have been successfully synthesized using a simple vacuum heat treatment and chemical oxidation method, and they have been used as cathode materials for lithium sulfur batteries. It is found that Sep/CNT/S@PANI composites possess high initial discharge capacity, good cyclic stability and good rate performance. The initial discharge capacity of the Sep/CNT/S@PANI-II composite is about 1100 mA h g⁻¹ at 2C, and remained at 650 mA h g⁻¹ after 300 cycles, and the corresponding coulombic efficiency is above 93%. Such performance is attributed to specific porous structure, outstanding adsorption characteristics, and excellent ion exchange capability of sepiolite, as well as excellent conductivity of CNT. Furthermore, the PANI coating has a pinning effect for sulfur, which enhances the utilization of the active mass and improves the cycling stability and the coulombic efficiency of the composites at high current rates.

The cathode composite materials for lithium sulfur batteries with a stable network structure consisting of natural sepiolite powders, carbon nanotubes and conductive polymer were synthesized by vacuum heat treatment and chemical oxidation method.

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries

Lithium-sulfur batteries can potentially be used as a chemical power source because of their high energy density. However, the sulfur cathode has several shortcomings, including fast capacity attenuation, poor electrochemical activity, and low Coulombic efficiency. Herein, multi-walled carbon nanotubes (CNTs), graphene oxide (GO), and manganese dioxide are introduced to the sulfur cathode. A MnO₂/GO/CNTs-S composite with a unique three-dimensional (3D) architecture was synthesized by a one-pot chemical method and heat treatment approach. In this structure, the innermost CNTs work as a conducting additive and backbone to form a conducting network. The MnO₂/GO nanosheets anchored on the sidewalls of CNTs have a dual-efficient absorption capability for polysulfide intermediates as well as afford adequate space for sulfur loading. The outmost nanosized sulfur particles are well-distributed on the surface of the MnO₂/GO nanosheets and provide a short transmission path for Li⁺ and the electrons. The sulfur content in the MnO₂/GO/CNTs-S composite is as high as 80 wt %, and the as-designed MnO₂/GO/CNTs-S cathode displays excellent comprehensive performance. The initial specific capacities are up to 1500, 1300, 1150, 1048, and 960 mAh g^-1 at discharging rates of 0.05, 0.1, 0.2, 0.5, and 1 C, respectively. Moreover, the composite cathode shows a good cycle performance: the specific capacity remains at 963.5 mAh g^-1 at 0.2 C after 100 cycles when the area density of sulfur is 2.8 mg cm^-2.

Synergistic Ultrathin Functional Polymer-Coated Carbon Nanotube Interlayer for High Performance Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have been intensively investigated as a next-generation rechargeable battery due to their high energy density of 2600 W·h kg(-1) and low cost. However, the systemic issues of Li-S batteries, such as the polysulfide shuttling effect and low Coulombic efficiency, hinder the practical use in commercial rechargeable batteries. The introduction of a conductive interlayer between the sulfur cathode and separator is a promising approach that has shown the dramatic improvements in Li-S batteries. The previous interlayer work mainly focused on the physical confinement of polysulfides within the cathode part, without considering the further entrapment of the dissolved polysulfides. Here, we designed an ultrathin poly(acrylic acid) coated single-walled carbon nanotube (PAA-SWNT) film as a synergic functional interlayer to address the issues mentioned above. The designed interlayer not only lowers the charge transfer resistance by the support of the upper current collector but also localizes the dissolved polysulfides within the cathode part by the aid of a physical blocking and chemical bonding. With the synergic combination of PAA and SWNT, the sulfur cathode with a PAA-SWNT interlayer maintained higher capacity retention over 200 cycles and achieved better rate retention than the sulfur cathode with a SWNT interlayer. The proposed approach of combining a functional polymer and conductive support material can provide an optimiztic strategy to overcome the fundamental challenges underlying in Li-S batteries.

Adsorption and diffusion of Li with S on pristine and defected graphene

The formation of Li_nS and diffusion of Li-ions on defected graphene as an encapsulation layer for Li–S batteries.

CuS quantum dot modified carbon aerogel as an immobilizer for lithium polysulfides for high-performance lithium–sulfur batteries

CuS quantum dot (QD) modified carbon aerogels were successfully prepared via a facile and scalable method to encapsulate sulfur and polysulfides into the hierarchical porous channel of lithium–sulfur batteries.

Surfactant-Templated Synthesis of Polypyrrole Nanocages as Redox Mediators for Efficient Energy Storage

Preparation of conducting-polymer hollow nanoparticles with different diameters was accomplished by surfactant templating. An anionic surfactant, namely sodium dodecylbenzenesulfonate, formed vesicles to template with the pyrrole monomer. Subsequent chemical oxidative polymerization of the monomer yielded spherical polypyrrole (PPy) nanoparticles with hollow interiors. The diameter of the hollow nanoparticles was easily controlled by adjusting the concentration of the surfactant. Subsequently, the size-dependent electrochemical properties of the nanoparticles, including redox properties and charge/discharge behavior, were examined. By virtue of the structural advantages, the specific capacitance (max. 326 F g⁻¹) of PPy hollow nanoparticles was approximately twice as large as that of solid PPy nanospheres. The hollow PPy nanostructure can easily be used as a conductive substrate for the preparation of metal/polymer nanohybrids through chemical and electrochemical deposition. Two different pseudocapacitive metal-oxide clusters were readily deposited on the inner and outer surfaces of the hollow nanoparticles, which resulted in an increase in the specific capacitance to 390 F g⁻¹. In addition, the hollow nanoparticles acted as a nanocage to prevent metal ion leaching during charge/discharge, thus allowing an excellent capacitance retention of ca. 86%, even following 10,000 cycles.

Hydroxylated carbon nanotube enhanced sulfur cathodes for improved electrochemical performance of lithium–sulfur batteries

Hydroxylated multi-walled carbon nanotubes were introduced into sulfur cathodes to utilize the hydrophilic attraction between the OH group and polysulfides as well as to increase the utilization of sulfur.