Hierarchical nanostructures self-assembled from a mixture system containing rod-coil block copolymers and rigid homopolymers

Breaking Mirror Symmetry of Double Gyroids via Self-Assembly of Chiral Block Copolymers

Significant enhancement of segment-scale chirality, as measured by vibrational circular dichroism (VCD), is observed in the helical phase (H*) of polylactide-based chiral block copolymers (BCPs*) due to the mesoscale chirality of the microphase-separated domains. Here, we report a weaker, yet meaningful, enhancement on the VCD signal of a double gyroid phase (DG) as compared to a double diamond phase (DD) and disordered phase from the same diblock BCPs*. Residual VCD enhancement indicates a weak degree of chiral symmetry breaking, implying the formation of a chiral double gyroid (DG*) instead of the canonical achiral form. Calculations on the basis of orientational self-consistent field theory, comparing coupling between the segmental-scale preference of an intradomain twist and morphological chirality, show that a transition between DG and DG* takes place above the critical chiral strength, driving a weak volume asymmetry between the two enantiomeric single networks of DG*. The formation of nanostructures with controllable mesoscale chiral asymmetry indicates a pathway for the amplification of optical activity driven by self-assembly.

Self-Assembly-Assisted Kinetically Controlled Papain-Catalyzed Formation of mPEG-b-Phe(Leu)x

Self-assembling peptide materials are promising next-generation materials with applications that include tissue engineering scaffolds, drug delivery, bionanomedicine, and enviro-responsive materials. Despite these advances, synthetic methods to form peptides and peptide-polymer conjugates still largely rely on solid-phase peptide synthesis (SPPS) and N-carboxyanhydride ring-opening polymerization (NCA-ROP), while green methods remain largely undeveloped. This work demonstrates a protease-catalyzed peptide synthesis (PCPS) capable of directly grafting leucine ethyl ester (Leu-OEt) from the C-terminus of a methoxy poly(ethylene glycol)-phenylalanine ethyl ester macroinitiator in a one-pot, aqueous reaction. By using the natural tendency of the growing hydrophobic peptide segment to self-assemble, a large narrowing of the (Leu)_x distributions for both mPEG₄₅-b-Phe(Leu)_x and oligo(Leu)_x coproducts, relative to oligo(Leu)_x synthesized in the absence of a macroinitiator (mPEG₄₅-Phe-OEt), was achieved. A mechanism is described where in situ β-sheet coassembly of mPEG₄₅-b-Phe(Leu)_x and oligo(Leu)_x coproducts during polymerization prevents peptide hydrolysis, providing a means to control the degree of polymerization (DP) and dispersity of diblock (Leu)_x segments (matrix-assisted laser desorption time-of-flight (MALDI-TOF) x = 5.1, dispersity ≤ 1.02). The use of self-assembly to control the uniformity of peptides synthesized by PCPS paves the way for precise peptide block copolymer architectures with various polymer backbones and amino acid compositions synthesized by a green process.

Self-assembly of amphiphilic alternating copolymers with stimuli-responsive rigid pendant groups

Amphiphilic alternating copolymers (AACs) possess unique self-assembly behaviours owing to their unique regular architecture.

The self-assembly behavior of polymer brushes induced by the orientational ordering of rod backbones: a dissipative particle dynamics study

This work proposed the “rod–coil competitive mechanism” for the self-assembly of polymer brushes with rod–coil backbones.

Experiments and Simulations of Complex Sugar-Based Coil-Brush Block Polymer Nanoassemblies in Aqueous Solution

In this work, we investigated the fundamental molecular parameters that guide the supramolecular assembly of glucose-based amphiphilic coil-brush block polymers in aqueous solution and elucidated architecture-morphology relationships through experimental and simulation tools. Well-defined coil-brush polymers were synthesized through ring-opening polymerizations (ROP) of glucose carbonates to afford norbornenyl-functionalized poly(glucose carbonate) (NB-PGC) macromonomers, followed by sequential ring-opening metathesis polymerizations (ROMP) of norbornene N-hydroxysuccinimidyl (NHS) esters and the NB-PGC macromonomers. Variation of the macromonomer length and grafting through ROMP conditions allowed for a series of coil-brush polymers to be synthesized with differences in the brush and coil dimensions, independently, where the side chain graft length and brush backbone were used to tune the brush, and the coil block length was used to vary the coil. Hydrolysis of the NHS moieties gave the amphiphilic coil-brush polymers, where the hydrophilic-hydrophobic ratios were dependent on the brush and coil relative dimensions. Experimental assembly in solution was studied and found to yield a variety of structurally dependent nanostructures. Simulations were conducted on the solution assembly of coil-brush polymers, where the polymers were represented by a coarse-grained model and the solvent was represented implicitly. There is qualitative agreement in the phase diagrams obtained from simulations and experiments, in terms of the morphologies of the assembled nanoscopic structures achieved as a function of coil-brush design parameters ( e.g., brush and coil lengths, composition). The simulations further showed the chain conformations adopted by the coil-brush polymers and the packing within these assembled nanoscopic structures. This work enables the predictive design of nanostructures from this glucose-based coil-brush polymer platform while providing a fundamental understanding of interactions within solution assembly of complex polymer building blocks.

Melamine-mediated supramolecular assembly of nucleobase-modified poly(l-lysine)

Melamine (M) was used to drive the supramolecular assembly of thymine (T)-modified poly(l-lysine) into fibers or spherical micelles through simply adjusting the substitution degree of T and the concentration of M.

Self-assembly and stimuli-responsive behaviours of side-chain liquid crystalline copolymers: a dissipative particle dynamics simulation approach

Side-chain liquid crystalline copolymers are able to self-assemble into various aggregates in selective solvents, in particular, deformed structures.

Inhomogeneity of block copolymers at the interface of an immiscible polymer blend

We present the effects of structure and stiffness of block copolymers on the interfacial properties of an immiscible homopolymer blend. Diblock and two-arm grafted copolymers with variation in stiffness are modeled using coarse-grained molecular dynamics to compare the compatibilization efficiency, i.e., reduction of interfacial tension. Overall, grafted copolymers are located more compactly at the interface and show better compatibilization efficiency than diblock copolymers. In addition, an increase in the stiffness for one of the blocks of the diblock copolymers causes unusual inhomogeneous interfacial coverage due to bundle formation. However, an increase in the stiffness for one of blocks of the grafted copolymers prevents the bundle formation due to the branched chain. As a result, homogeneous interfacial coverage of homopolymer blends is realized with significant reduction of interfacial tension which makes grafted copolymer a better candidate for the compatibilizer of immiscible homopolymer blend.

Polypeptide self-assemblies: nanostructures and bioapplications

Polypeptide copolymers can self-assemble into diverse aggregates. The morphology and structure of aggregates can be varied by changing molecular architectures, self-assembling conditions, and introducing secondary components such as polymers and nanoparticles. Polypeptide self-assemblies have gained significant attention because of their potential applications as delivery vehicles for therapeutic payloads and as additives in the biomimetic mineralization of inorganics. This review article provides an overview of recent advances in nanostructures and bioapplications related to polypeptide self-assemblies. We highlight recent contributions to developing strategies for the construction of polypeptide assemblies with increasing complexity and novel functionality that are suitable for bioapplications. The relationship between the structure and properties of the polypeptide aggregates is emphasized. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Cellular Internalization of Rod-Like Nanoparticles with Various Surface Patterns: Novel Entry Pathway and Controllable Uptake Capacity

The cellular internalization of rod-like nanoparticles (NPs) is investigated in a combined experimental and simulation study. These rod-like nanoparticles with smooth, abacus-like (i.e., beads-on-wires), and helical surface patterns are prepared by the cooperative self-assembly of poly(γ-benzyl-l-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) block copolymers and PBLG homopolymers. All three types of NPs can be internalized via endocytosis. Helical NPs exhibit the best endocytic efficacy, followed by smooth NPs and abacus-like NPs. Coarse-grained molecular dynamics simulations are used to examine the endocytic efficiency of these NPs. The NPs with helical and abacus-like surfaces can be endocytosed via novel "standing up" (tip entry) and "gyroscope-like" (precession) pathways, respectively, which are distinct from the pathway of traditional NPs with smooth surfaces. This finding indicates that the cellular internalization capacity and pathways can be regulated by introducing stripe patterns (helical and abacus-like) onto the surface of rod-like NPs. The results of this study may lead to novel applications of biomaterials, such as advanced drug delivery systems.

Redox-Responsive Self-Assembly Micelles from Poly(N-acryloylmorpholine-block-2-acryloyloxyethyl ferrocenecarboxylate) Amphiphilic Block Copolymers as Drug Release Carriers

Novel well-defined redox-responsive ferrocene-containing amphiphilic block copolymers (PACMO-b-PAEFC) were synthesized by ATRP, with poly(N-acryloylmorpholine) (PACMO) as hydrophilic blocks and poly(2-acryloyloxyethyl ferrocenecarboxylate) (PAEFC) as hydrophobic blocks. The copolymers were characterized by FT-IR and ¹H NMR spectroscopies and gel permeation chromatography, and the crystalline behavior was determined by X-ray diffraction and small-angle X-ray scattering. The results showed that the size of the lamellar crystals and crystallinity vary with the systematic compositions while the periodic structure of the lamellar stacks has no obvious change. These block copolymers could self-assemble and form globular nanoscaled core-shell micellar aggregates in aqueous solution. The reductive ferrocene groups could be changed into hydrophilic ferrocenium via mild oxidation, whereas the polymer micelles at the oxidation state could reversibly recover from their original states upon reduction by vitamin C. The tunable redox response was investigated and verified by transmission electron microscopy, ultraviolet-visible spectroscopy, cyclic voltammetry, and dynamic light scattering measurements. The copolymer micelles were used to entrap anticancer drug paclitaxel (PTX), with high drug encapsulation efficiency of 61.4%, while the PTX-loaded drug formulation exhibited oxidation-controlled drug release, and the release rate could be mediated by the kinds and concentrations of oxidants. MTT assay was performed to disclose the biocompatibility and security of the copolymer micelles and to assess anticancer efficiency of the PTX-loaded nanomicelles. The developed copolymer nanomicelles with reversible redox response are anticipated to have potential in targeted drug delivery systems for cancer therapy.

Mediating physicochemical properties and paclitaxel release of pH-responsive H-type multiblock copolymer self-assembly nanomicelles through epoxidation

We focused on modulation of the physicochemical and biomedical properties of copolymer nanomicellesviaepoxidation, which provided significant improvements.

Alkali-Resistant Quasi-Solid-State Electrolyte for Stretchable Supercapacitors

Research on stretchable energy-storage devices has been motivated by elastic electronics, and considerable research efforts have been devoted to the development of stretchable electrodes. However, stretchable electrolytes, another critical component in stretchable devices, have earned quite little attention, especially the alkali-resistant ones. Here, we reported a novel stretchable alkali-resistant electrolyte made of a polyolefin elastomer porous membrane supported potassium hydroxide-potassium polyacrylate (POE@KOH-PAAK). The as-prepared electrolyte shows a negligible plastic deformation even after 1000 stretching cycles at a strain of 150% as well as a high conductivity of 0.14 S cm^-1. It also exhibits excellent alkali resistance, which shows no obvious degradation of the mechanical performance after immersion in 2 M KOH for up to 2 weeks. To demonstrate its good properties, a high-performance stretchable supercapacitor is assembled using a carbon-nanotube-film-supported NiCo₂O₄ (CNT@NiCo₂O₄) as the cathode and Fe₂O₃ (CNT@Fe₂O₃) as the anode, proving great application promise of the stretchable alkali-resistant electrolyte in stretchable energy-storage devices.

Graphene oxide-enhanced sol-gel transition sensitivity and drug release performance of an amphiphilic copolymer-based nanocomposite

We report the fabrication of a highly sensitive amphiphilic copolymer-based nanocomposite incorporating with graphene oxide (GO), which exhibited a low-intensity UV light-triggered sol-gel transition. Non-cytotoxicity was observed for the composite gels after the GO incorporation. Of particular interest were the microchannels that were formed spontaneously within the GO-incorporated UV-gel, which expedited sustained drug release. Therefore, the present highly UV-sensitive, non-cytotoxic amphiphilic copolymer-based composites is expected to provide enhanced photothermal therapy and chemotherapy by means of GO's unique photothermal properties, as well as through efficient passive targeting resulting from the sol-gel transition characteristic of the copolymer-based system with improved sensitivity, which thus promises the enhanced treatment of patients with cancer and other diseases.

Strip-Pattern-Spheres Self-Assembled from Polypeptide-Based Polymer Mixtures: Structure and Defect Features

We found that poly(γ-benzyl-L-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) rod-coil block copolymers and polystyrene (PS) homopolymers can cooperatively self-assemble into nano-spheres with striped patterns on their surfaces (strip-pattern-spheres) in aqueous solution. With assistance of dissipative particle dynamics simulation, it is discovered that the PS homopolymers form a spherical template core and the PBLG-b-PEG block copolymers assemble into striped patterns on the spherical surface. The hydrophobic PBLG rods are packed orderly in the strips, while the hydrophilic PEG blocks stabilize the strip-pattern-spheres in solution. Defects such as dislocations and disclinations can be observed in the striped patterns. Self-assembling temperature and sphere radius are found to affect defect densities in the striped patterns. A possible mechanism is proposed to illustrate how PBLG-b-PEG and PS cooperatively self-assemble into hierarchical spheres with striped patterns on surfaces.

Ultra-large sheet formation by 1D to 2D hierarchical self-assembly of a “rod–coil” graft copolymer with a polyphenylene backbone

This study presents a unique ultra-large sheet formation through 1D to 2D hierarchical self-assembly of a rod–coil graft copolymer containing a rigid polyphenylene backbone tethered with flexible poly(ethylene oxide) side chains.

Formation of CaCO3 fibres directed by polypeptide vesicles

Under the mediation of polypeptide vesicles self-assembled from PLGA-b-PPO-b-PLGA triblock copolymers, calcium carbonate fibres are generated through a solution–precursor–solid process.

Polymerization-Induced Self-Assembly Using Visible Light Mediated Photoinduced Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization

The ruthenium-based photoredox catalyst, Ru(bpy)₃Cl₂, was employed to activate reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization via a photoinduced electron transfer (PET) process under visible light (λ = 460 nm, 0.7 mW/cm²). Poly(oligo(ethylene glycol) methyl ether methacrylate) was chain extended with benzyl methacrylate to afford in situ self-assembled polymeric nanoparticles with various morphologies. The effect of different intrinsic reaction parameters, such as catalyst concentration, total solids content, and cosolvent addition was investigated with respect to the formation of different nanoparticle morphologies, including spherical micelles, worm-like micelles, and vesicles. Importantly, highly pure worm-like micelles were readily isolated due to the in situ formation of highly viscous gels. Finally, "ON/OFF" control over the dispersion polymerization was demonstrated by online Fourier transform near-infrared (FTNIR) spectroscopy, allowing for temporal control over the nanoparticle morphology.