One-dimensional porous nanofibers of Co3O4 on the carbon matrix from human hair with superior lithium ion storage performance

Rapid microwave hydrothermal processed spinel Co3O4nanospheres infused N-doped graphene nanosheets for high-performance battery

Spinel Co₃O₄nanospheres have been synthesized by the microwave-assisted hydrothermal method. The N-doped graphene nanosheets (NGN) were synthesized using Hummer's method. The prepared spinel Co₃O₄and NGN were mixed under certain proportions using an ultrasonication process and treated with microwave radiation to prepare a novel spinel Co₃O₄nanospheres infused NGN. The synthesized samples were characterized by x-ray diffraction, Raman spectroscopy, Zetasizer, scanning electron microscope/transmission electron microscopy and x-ray photoelectron spectroscopy for identifying crystal structure and phase, particle size, and the morphology of the nanostructure and the elemental configuration, respectively. The prepared spinel Co₃O₄/NGN were used as anode material and lithium metal as a reference electrode to fabricate half cell using Swagelok cell components. The electrochemical properties were studied and found to exhibit a larger specific capacity of 575 mAh g^-1compared to traditional graphite electrodes, after 100 cycles under 0.1 C rate with a coulombic efficiency of ≈100%. The good electrochemical properties ascribe to the distinctive surface morphological nanostructures of nanoporous nanospheres of spinel Co₃O₄nanospheres and nanosheets of N-doped graphene that reduce the lithium-ion diffusion pathway. The developed anode material would be a potential electrode for lithium ion battery applications.

Rapid and sensitive detection of selective 1,2-diaminobenzene based on facile hydrothermally prepared doped Co3O4/Yb2O3 nanoparticles

In this approach, the performance of a newly developed sensor probe coated with low-dimensional Co₃O₄/Yb₂O₃ nanoparticles (NPs) in rapidly detecting 1,2-diaminobenzene was evaluated by an electrochemical technique. The sensor probe was fabricated by depositing a very thin layer consisting of synthesized Co₃O₄/Yb₂O₃ NPs using a 5% Nafion conducting binder onto a glassy carbon electrode (GCE). The facile hydrothermally prepared Co₃O₄/Yb₂O₃ NPs were totally characterized by conventional methods such as FTIR, UV-vis, TEM, XPS, EDS, and XRD analyses. The fabricated chemical sensor probe was found to exhibit long-term activity, stability in electrochemical response, good sensitivity (5.6962 μAμM^-1cm^-2), lowest detection limit (0.02±0.001 pM), and broad linear dynamic range (0.1 pM to 0.01 mM). The observed performances suggest that the newly introduced sensor could play an efficient role in detecting 1,2-diaminobenzene especially in healthcare and environmental applications on a broad scale.

Ultrasound-assisted heterogeneous peroxymonosulfate activation with Co/SBA-15 for the efficient degradation of organic contaminant in water

A potential advanced oxidation process is provided by SBA-15 supported cobalt (Co/SBA-15) activated peroxymonosulfate (PMS, HSO₅^-) in the ultrasound (US) enhanced system, named Co/SBA-15/PMS/US process, for the elimination of refractory organic contaminants (ROCs) in water. This process exhibited favorable behavior with 95.5 % C.I. Acid Orange 7 (AO7) degradation using 5 mM PMS, 0.5 g/L Co/SBA-15 catalyst, 190 W US power at initial pH of 6.0 after 90 min reaction. Co/SBA-15 particles remained satisfied catalytic activity and stability with very low level of cobalt release in 10 successive cycles. The scavenge tests and electron paramagnetic resonance (EPR) result as well as the cobalt leaching concentration revealed that the reactive radicals (SO₄^- and OH) on catalyst surface were primarily responsible for AO7 oxidation, and a rational mechanism was elucidated accordingly. The presence of chloride ions and bicarbonate could improve AO7 removal. The probable pathway of AO7 degradation was proposed based on the intermediates identified. This Co/SBA-15/PMS/US process could be well applied for the destruction of other typical ROCs (bisphenol A, clofibric acid, and rhodamine B) and the treatment of lake and river water spiked with AO7, and this study may provide an efficient PMS technique for the remediation of ROCs in water.

Hierarchical Co3O4 nanorods anchored on nitrogen doped reduced graphene oxide: a highly efficient bifunctional electrocatalyst for rechargeable Zn–air batteries

The electrocatalytic activity of the N-rGO/Co₃O₄ nanocomposites was tuned towards highly efficient bifunctional air-cathodes for Zn–Air batteries.

Novel Synthesis of Holey Reduced Graphene Oxide/Polystyrene (HRGO/PS) Nanocomposites by Microwave Irradiation as Anodes for High-Temperature Lithium-Ion Batteries

To overcome the risk of exothermic lithium-ion battery overheating reactions, we fabricated a novel, high-temperature-stable anode material composed of holey reduced graphene oxide/polystyrene (HRGO/PS) nanocomposites synthesized through in situ bulk polymerization in the presence of HRGO via microwave irradiation. The HRGO/PS nanocomposites were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, and electron microscopy analyses including field-emission scanning electron microscopy and transmission electron microscopy. All characterization studies demonstrated homogenous dispersion of HRGO in the PS matrix, which enhanced the thermal and electrical properties of the overall nanocomposites. These novel HRGO/PS nanocomposites exhibited excellent electrochemical responses, with reversible charge/discharge capacities of 92.1/92.78 mA·h/g at a current density of 500 mA/g with ~100% capacity retention and ~100% coulombic efficiency at room temperature. Furthermore, an examination of the electrochemical properties of these nanocomposites at 110 °C showed that HRGO/PS nanocomposites still displayed good charge/discharge capacities with stable cycle performances for 150 cycles.

Ultrastable Graphene-Encapsulated 3 nm Nanoparticles by In Situ Chemical Vapor Deposition

Nanoscale materials offer enormous opportunities for catalysis, sensing, energy storage, and so on, along with their superior surface activity and extremely large surface area. Unfortunately, their strong reactivity causes severe degradation and oxidation even under ambient conditions and thereby deteriorates long-term usability. Here superlative stable graphene-encapsulated nanoparticles with a narrow diameter distribution prepared via in situ chemical vapor deposition (CVD) are presented. The judiciously designed CVD protocol generates 3 nm size metal and ceramic nanoparticles intimately encapsulated by few-layer graphene shells. Significantly, graphene-encapsulated Co₃ O₄ nanoparticles exhibit outstanding structural and functional integrity over 2000 cycles of lithiation/delithiation for Li-ion battery anode application, accompanied by 200% reversible volume change of the inner core particles. The insight obtained from this approach offers guidance for utilizing high-capacity electrode materials for Li-ion batteries. Furthermore, this in situ CVD synthesis is compatible with many different metal precursors and postsynthetic treatments, including oxidation, phosphidation, and sulfidation, and thus offers a versatile platform for reliable high-performance catalysis and energy storage/conversion with nanomaterials.

Fast-Charging and High Volumetric Capacity Anode Based on Co3 O4 /CuO@TiO2 Composites for Lithium-Ion Batteries

This paper presents an investigation of anodic TiO₂ nanotube arrays (TNAs), with a Co₃ O₄ /CuO coating, for lithium-ion batteries (LIBs). The coated TNAs are investigated using various analytical techniques, with the results clearly suggesting that the molar ratio of Co₃ O₄ /CuO in the TiO₂ nanotubes substantially influences its battery performance. In particular, a cobalt/copper molar ratio of 2:1 on the TNAs (Co₂ Cu₁ @TNAs) features the best LIBs anode performance, exhibiting high reversible capacity and enhanced cycling stability. Noticeably, Co₂ Cu₁ @TNAs achieve excellent rate capability even after quite a high current density of 20.0 A g^-1 (≈25 C, where C corresponds to complete discharge in 1 h) and superior volumetric reversible capacity of ≈3330 mA h^-1  cm^-3 . This value is approximately seven times higher than those of a graphite-based anode. This outstanding performance is attributed to the synergistic effects of Co₂ Cu₁ @TNAs: 1) the structural advantage of TNAs, with their large amount of free space to accommodate the large volume expansion during Li⁺ insertion/extraction and 2) the optimized ratio of Co₃ O₄ and CuO in the composite for improved capacity. In addition, no binder or conductive agent is used, which is partly responsible for the overall improved volumetric capacity and electrochemical performance.

Design and synthesis of interconnected hierarchically porous anatase titanium dioxide nanofibers as high-rate and long-cycle-life anodes for lithium-ion batteries

We suggest an efficient and simple synthetic strategy to prepare interconnected hierarchically porous anatase TiO2 (IHP-A-TiO2) nanofibers by two synergetic effects: phase separation between polymers and relative humidity control during electrospinning. The macro channels formed by polystyrene decomposition were interconnected by numerous mesopores that were formed by evaporation of infiltrated water vapor in the structure. The resulting IHP-A-TiO2 nanofibers showed better Li+ ion storage performances than the TiO2 materials reported in the literature. The discharge capacity of IHP-A-TiO2 nanofibers for the 3000th cycle at 1.0 A g-1 and corresponding coulombic efficiency from the 20th cycle onward were 142 mA h g-1 and >99.0%, respectively. Well-interconnected, ultrafine TiO2 nanocrystals within the nanofiber showed structural stability during cycling and facilitated facile charge transfer at the electrode-electrolyte interface.

Enhancing Catalyzed Decomposition of Na2CO3 with Co2MnO x Nanowire-Decorated Carbon Fibers for Advanced Na-CO2 Batteries

The metal-CO₂ batteries, especially Na-CO₂, batteries come into sight owing to their high energy density, ability for CO₂ capture, and the abundance of sodium resource. Besides the sluggish electrochemical reactions at the gas cathodes and the instability of the electrolyte at a high voltage, the final discharge product Na₂CO₃ is a solid and poor conductor of electricity, which may cause the high overpotential and poor cycle performance for the Na-CO₂ batteries. The promotion of decomposition of Na₂CO₃ should be an efficient strategy to enhance the electrochemical performance. Here, we design a facile Na₂CO₃ activation experiment to screen the efficient cathode catalyst for the Na-CO₂ batteries. It is found that the Co₂MnO _x nanowire-decorated carbon fibers (CMO@CF) can promote the Na₂CO₃ decomposition at the lowest voltage among all these metal oxide-decorated carbon fiber structures. After assembling the Na-CO₂ batteries, the electrodes based on CMO@CF show lower overpotential and better cycling performance compared with the electrodes based on pristine carbon fibers and other metal oxide-modified carbon fibers. We believe this catalyst screening method and the freestanding structure of the CMO@CF electrode may provide an important reference for the development of advanced Na-CO₂ batteries.

2-Nitrophenol sensor-based wet-chemically prepared binary doped Co3O4/Al2O3 nanosheets by an electrochemical approach

Herein, the wet-chemical process (co-precipitation) was used to prepare nanosheets (NSs) of Co₃O₄/Al₂O₃ in an alkaline medium (pH ∼ 10.5). The synthesized NSs were totally characterized by Fourier-transform infrared spectroscopy (FTIR), ultraviolet visible spectroscopy (UV/vis), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and powder X-ray diffraction (XRD). The synthesized NSs were deposited onto a glassy carbon electrode (GCE) to prepare a very thin layer with a conducting binder for detecting 2-nitrophenol (2-NP) selectively by a reliable electrochemical method. The proposed chemical sensor exhibits good sensitivity (54.9842 μA μM⁻¹ cm⁻²), long-term stability, and enhanced chemical response by electrochemical approaches. The resultant current is found to be linear over the concentration range (LDR) from 0.01 nM to 0.01 mM. The estimated detection limit (DL) is equal to 1.73 ± 0.02 pM. This study introduces a potential route for future sensitive sensor development with Co₃O₄/Al₂O₃ NSs by an electrochemical approach for the selective detection of hazardous and carcinogenic chemicals in environmental and health care fields.

This potential research work introduces a route of future sensitive sensor development with Co₃O₄/Al₂O₃ NSs by electrochemical approach to selective detection of hazardous and carcinogenic chemicals in environmental and health care fields.

Target construction of Co3O4 with an improved layer structure for highly efficient Li-storage properties

An improved layered structure for the conversion-reaction-based anode material of Co₃O₄ is demonstrated, which displays highly efficient Li-storage properties.

Geometrically intricate sheet-on-pillar/flake hierarchy embracing cobaltosic and manganese oxides over flexible carbon scaffold for binder-free high-energy-density supercapacitor

Sheet-on-rod/flake hierarchy embracing Co₃O₄ and MnO₂ on carbon fabric is used for binder-free high-energy-density supercapacitor. Electrochemical behaviour is illuminated on the basis of shape-porosity-property correlation.

A Convenient Synthesis Route for Co3O4 Hollow Microspheres and Their Application as a High Performing Anode in Li-Ion Batteries

A new, rapid, and cost-effective method for synthesizing hollow microspheres (HMSs) of cobalt oxide (Co₃O₄) using the phloroglucinol-formaldehyde gel route is reported here. Further, the synthesized hollow Co₃O₄ microspheres were investigated as an anode material for Li-ion batteries. The Co₃O₄ hollow spheres exhibited excellent electrochemical performance and cycling stability, for example, a capacity of 915 mA h g^-1 was obtained at 1 C rate over 350 cycles. The material also exhibited good performance at high rates, viz., capacities of 500, 350, and 250 mA h g^-1 at 10 C, 25 C, and 50 C, respectively, with good capacity retention over 500 cycles. The excellent electrochemical performance of Co₃O₄ can be ascribed to the porous nanoarchitecture that provides a short diffusion length for Li⁺ ions and high electrolyte percolation in the porous structure. Additionally, the thin porous wall of the nanocages provides an effective way to overcome the issues associated with the volume change occurring during Li charge/discharge. The conversion of Co₃O₄ into Co upon discharge was also probed by measuring the magnetic properties.

Design of a Porous Cathode for Ultrahigh Performance of a Li-ion Battery: An Overlooked Pore Distribution

Typical cathode materials of Li-ion battery suffer from a severe loss in specific capacity, and this problem is regarded as a major obstacle in the expansion of newer applications. To overcome this, porous cathodes are being extensively utilized. However, although it seems that the porosity in the cathode would be a panacea for high performance of LIBs, there is a blind point in the cathode consisting of porous structures, which makes the porous design to be a redundant. Here, we report the importance of designing the porosity of a cathode in obtaining ultrahigh performance with the porous design or a degraded performance even with increase of porosity. Numerical simulations show that the cathode with 40% porosity has 98% reduction in the loss of specific capacity when compared to the simple spherical cathode when the C-rate increases from 2.5 to 80 C. In addition, the loss over total cycles decreases from 30% to only about 1% for the cathode with 40% porosity under 40 C. Interestingly, however, the specific capacity could be decreased even with the increase in porosity unless the pores were evenly distributed in the cathode. The present analysis provides an important insight into the design of ultrahigh performance cathodes.

Unique 1D Co3O4 crystallized nanofibers with (220) oriented facets as high-performance lithium ion battery anode material

A novel one-step hydrothermal and calcination strategy was developed to synthesize the unique 1D oriented Co₃O₄ crystal nanofibers with (220) facets on the carbon matrix derived from the natural, abundant and low cost wool fibers acting as both carbon precursor and template reagent. The resultant W2@Co₃O₄ nanocomposite exhibited very high specific capacity and favorable high-rate capability when used as anode material of lithium ion battery. The high reversible Li⁺ ion storage capacity of 986 mAh g⁻¹ was obtained at 100 mA g⁻¹ after 150 cycles, higher than the theoretical capacity of Co₃O₄ (890 mAh g⁻¹). Even at the higher current density of 1 A g⁻¹, the electrode could still deliver a remarkable discharge capacity of 720 mAh g⁻¹ over 150 cycles.

Multicomponent (Ce, Cu, Ni) oxides with cage and core-shell structures: tunable fabrication and enhanced CO oxidation activity

Solvothermal synthesis of Cu2O cubes from Cu(OAc)2 in ethanol provided templates for tunable formation of novel multicomponent composites: hollow CeO2-Cu2O (), core-shell NiO@Cu2O () and hollow CeO2-NiO-Cu2O (). Composites catalyze the oxidation of CO at a lower temperature than the parent Cu2O cubes.

A flexible, transparent and super-long-life supercapacitor based on ultrafine Co3O4 nanocrystal electrodes

Flexible and transparent supercapacitors, as advanced energy storage devices, are essential for the development of innovative wearable electronics because of their unique optical and mechanical qualities. However, all previous designs are based on carbon-based nanostructures like carbon nanotubes and graphene, and these devices usually have poor or short cycling lives. Here, we demonstrate a high-performance, flexible, transparent, and super-long-life supercapacitor made from ultrafine Co3O4 nanocrystals synthesized using a novel process involving laser ablation in liquid. The fabricated flexible and transparent pseudocapacitor exhibits a high capacitance of 177 F g(-1) on a mass basis and 6.03 mF cm(-2) based on the area of the active material at a scan rate of 1 mV s(-1), as well as a super-long cycling life with 100% retention rate after 20 000 cycles. An optical transmittance of up to 51% at a wavelength of 550 nm is achieved, and there are not any obvious changes in the specific capacitance after bending from 0° to 150°, even after bending over 100 times. The integrated electrochemical performance of the Co3O4-based supercapacitor is greatly superior to that of the carbon-based ones reported to date. These findings open the door to applications of transition metal oxides as advanced electrode materials in flexible and transparent pseudocapacitors.

Synthesis of hybrid carbon spheres@nitrogen-doped graphene/carbon nanotubes and their oxygen reduction activity performance

The hybrid architecture of carbon spheres@nitrogen-doped graphene/carbon nanotubes (CS@N-G/CNT) was synthesized by a hydrothermal and ultrasonic-assisted method.

Graphene-coated mesoporous Co3O4 fibers as an efficient anode material for Li-ion batteries

The graphene-coating porous cobalt oxide fibers (Co₃O₄@G) were synthesized using coordination polymers as precursors through calcination and subsequent self-assembly process. The obtained materials exhibit good electrochemical performances.