Biocompatible fluorescent supramolecular nanofibrous hydrogel for long-term cell tracking and tumor imaging applications

Synergistic integration of a rhodamine-labelled tripeptide into AIE-active fluorogenic probe: Enabling nanomolar detection of Al3+ ions through test strips, thin films, and Arduino-assisted optosensing platform

Peptide-fluorophore conjugates (PFCs) have been expeditiously utilized for metal ion recognition owing to their distinctive characteristics. Selective detection and quantification of aluminum is essential to minimize health and environmental risks. Herein, we report the synthesis and characterization of a new chemoprobe with aggregation-induced emission characteristics by chemically conjugating rhodamine-B fluorophore with a tripeptide. The probe revealed β-sheet secondary conformation in both solid and solution states, as confirmed by FT-IR, PXRD, and CD experiments. AIE characteristics of the probe in water-MeCN mixtures revealed the formation of spherically shaped nanoaggregates with an average size of 353 ± 7 nm, as confirmed by SEM, TEM, and DLS studies. The probe exhibited a large stokes shift (175 nm) and displayed selective colorimetric and fluorometric responses towards Al3+ ions with an extremely low detection limit (51 nm) and a fast response time (≤15 s). Comparative NMR studies confirmed the cleavage of spirolactam ring upon aluminum binding. The probe's practicality was enhanced through integration into test strips and thin films, allowing solid-phase detection of Al3+ ions. Furthermore, an RGB-Arduino enabled optosensing device has been developed to enable instant quantifiable analysis of aluminum concentrations in real-time conditions.

Stimulus-responsive peptide hydrogels: a safe and least invasive administration approach for tumor treatment

Tumours, with increasing mortality around the world, have bothered human beings for decades. Enhancing the targeting of antitumor drugs to tumour tissues is the key to enhancing their antitumor effects. The tumour microenvironment is characterised by a relatively low pH, overexpression of certain enzymes, redox imbalance, etc. Therefore, smart drug delivery systems that respond to the tumour microenvironment have been proposed to selectively release antitumor drugs. Among them, peptide hydrogels as a local drug delivery system have received much attention due to advantages such as high biocompatibility, degradability and high water-absorbing capacity. The combination of peptide segments with different physiological functions allows for tumour targeting, self-aggregation, responsiveness, etc. Morphological and microstructural changes in peptide hydrogels can occur when utilising the inherent pathological microenvironment of tumours to trigger drug release, which endows such systems with limited adverse effects and improved therapeutic efficiency. Herein, this review outlined the driving forces, impact factors, and sequence design in peptide hydrogels. We also discussed the triggers to induce the transformation of peptide-based hydrogels in the tumour microenvironment and described the advancements of peptide-based hydrogels for local drug delivery in tumour treatment. Finally, we gave a brief perspective on the prospects and challenges in this field.

Self-assembled short peptides: Recent advances and strategies for potential pharmaceutical applications

Self-assembled short peptides have intrigued scientists due to the convenience of synthesis, good biocompatibility, low toxicity, inherent biodegradability and fast response to change in the physiological environment. Therefore, it is necessary to present a comprehensive summary of the recent advances in the last decade regarding the construction, route of administration and application of self-assembled short peptides based on the knowledge on their unique and specific ability of self-assembly. Herein, we firstly explored the molecular mechanisms of self-assembly of short peptides, such as non-modified amino acids, as well as Fmoc-modified, N-functionalized, and C-functionalized peptides. Next, cell penetration, fusion, and peptide targeting in peptide-based drug delivery were characterized. Then, the common administration routes and the potential pharmaceutical applications (drug delivery, antibacterial activity, stabilizers, imaging agents, and applications in bioengineering) of peptide drugs were respectively summarized. Last but not least, some general conclusions and future perspectives in the relevant fields were briefly listed. Although with certain challenges, great opportunities are offered by self-assembled short peptides to the fascinating area of drug development.

Gel scaffolds and emerging applications in biomedicine

Nowadays, gels are formed by small molecules self-assembling under the influence of various non-covalent interactions. They can be easily perturbed, which allows for the careful tweaking of their properties. They are kinetically confined, and following production, they usually do not demonstrate time-variable changes in material properties. When exposed to external stimuli such as temperature, pH, light, enzymes, redox, and chemical analytes, such materials may become switchable, leading to the reconfiguration of the gel matrix into a different type of network. The transformations allow gel-to-gel transitions, while the changes in the molecular aggregation result in the alteration of the physical and chemical properties of the gel with time. Here, we discuss various methods used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. The dynamic modification of gels allows the construction of an array of gels with various properties from a single material, which eventually extends the limit of application of the gels.

Oral delivery of self-assembling bioactive peptides to target gastrointestinal tract disease

Peptides are known for their diverse bioactivities including antioxidant, antimicrobial, and anticancer activity, all three of which are potentially useful in treating colon-associated diseases. Beside their capability to stimulate positive health effects once released in the body, peptides are able to form useful nanostructures such as hydrogels. Combining peptide bioactivity and peptide gel-forming potentials can create interesting systems that can be used for oral delivery. This combination, acting as a two-in-one system, has the potential to avoid the need for delicate entrapment of a drug or natural bioactive compound. We here review the context and research progress, to date, in this area.

Peptide-based supramolecular hydrogels for bioimaging applications

Peptide-based supramolecular hydrogels have unique merits in bioimaging applications.

Labeling of Nanofiber-Forming Peptides by Site-Directed Bioconjugation: Effect of Spacer Length on Self-Assembly

BACKGROUND

The conjugation of small organic molecules to self-assembling peptides is a versatile tool to decorate nanostructures with original functionalities. Labeling with chromophores or fluorophores, for example, creates optically active fibers with potential interest in photonic devices.

AIM AND OBJECTIVE

In this work, we present a rapid and effective labeling procedure for a self-assembling peptide able to form nanofibers. Rapid periodate oxidation of the N-terminal serine residue of the peptide and subsequent conjugation with dansyl moiety generated fluorophore-decorated peptides.

RESULTS

Three dansyl-conjugated self-assembling peptides with variable spacer-length were synthesized and characterized and the role of the size of the linker between fluorophore and peptide in self-assembling was investigated. Our results show that a short linker can alter the self-assembly in nanofibers of the peptide.

CONCLUSIONS

Herein we report on an alternative strategy for creating functionalized nanofibrils, able to expand the toolkit of chemoselective bioconjugation strategies to be used in site-specific decoration of self-assembling peptides.

Beyond Fmoc: a review of aromatic peptide capping groups

Self-assembling short peptides have attracted widespread interest due to their tuneable, biocompatible nature and have potential applications in energy materials, tissue engineering, sensing and drug delivery. The hierarchical self-assembly of these peptides is highly dependent on the selection of not only amino acid sequence, but also the capping group which is often employed at the N-terminus of the peptide to drive self-assembly. Although the Fmoc (9H-fluorenylmethyloxycarbonyl) group is commonly used due to its utility in solid phase peptide synthesis, many other aromatic capping groups have been reported which yield functional, responsive materials. This review explores recent developments in the utilisation of functional, aromatic capping groups beyond the Fmoc group for the creation of redox-responsive, fluorescent and drug delivering hydrogel scaffolds.

Alkene-Azide 1,3-Dipolar Cycloaddition as a Trigger for Ultrashort Peptide Hydrogel Dissolution

An alkene-azide 1,3-dipolar cycloaddition between trans-cyclooctene (TCO) and an azide-capped hydrogel that promotes rapid gel dissolution is reported. Using an ultrashort aryl azide-capped peptide hydrogel (PhePhe), we have demonstrated proof-of-concept where upon reaction with TCO, the hydrogel undergoes a gel-sol transition via 1,2,3-triazoline degradation and 1,6-self-immolation of the generated aniline. The potential application of this as a general trigger in sustained drug delivery is demonstrated through release of encapsulated cargo (doxorubicin). Administration of TCO resulted in 87 % of the cargo being released in 10 h, compared to 13-14 % in the control gels. This is the first example of a potential bioorthogonal-triggered hydrogel dissolution using a traditional click-type reaction. This type of stimulus could be extended to other aryl azide-capped hydrogels.

Glyoxylamide-based self-assembly hydrogels for sustained ciprofloxacin delivery

Glyoxylamide-based hydrogels have high ciprofloxacin (CIP) loading capacity and demonstrate a sustained release profile of over 15 days.

Host Materials Transformable in Tumor Microenvironment for Homing Theranostics

A pathology-adaptive nanosystem, in which nest-like hosts are built based on nanofibers that are transformed from i.v. injected nanoparticles under the acidic tumor microenvironment. The solid tumor is artificially modified by nest-like hosts readily and firmly, resulting in highly efficient accumulation and stabilization of guest theranostics. This strategy shows great potential for the theranostics delivery to tumors.

Controlling self-assembly of diphenylalanine peptides at high pH using heterocyclic capping groups

Using small angle neutron scattering (SANS), it is shown that the existence of pre-assembled structures at high pH for a capped diphenylalanine hydrogel is controlled by the selection of N-terminal heterocyclic capping group, namely indole or carbazole. At high pH, changing from a somewhat hydrophilic indole capping group to a more hydrophobic carbazole capping group results in a shift from a high proportion of monomers to self-assembled fibers or wormlike micelles. The presence of these different self-assembled structures at high pH is confirmed through NMR and circular dichroism spectroscopy, scanning probe microscopy and cryogenic transmission electron microscopy.

Implantable Tin Porphyrin-PEG Hydrogels with pH-Responsive Fluorescence

Tetracarboxy porphyrins can be polymerized with polyethylene glycol (PEG) diamines to generate hydrogels with intense, near-infrared, and transdermal fluorescence following subcutaneous implantation. Here, we show that the high density porphyrins of the preformed polymer can be chelated with tin via simple incubation. Tin porphyrin hydrogels exhibited increasing emission intensities, ratios, and lifetimes from pH 1 to 10. Tin porphyrin hydrogel emission was strongly reversible and pH responsiveness was observed in the physiological range between pH 6 and pH 8. pH-sensitive emission was detected via noninvasive transdermal fluorescence imaging in vivo following subcutaneous implantation in mice.

D-amino acid-containing supramolecular nanofibers for potential cancer therapeutics

Nanostructures formed by peptides that self-assemble in water through non-covalent interactions have attracted considerable attention because peptides possess several unique advantages, such as modular design and easiness of synthesis, convenient modification with known functional motifs, good biocompatibility, low immunogenicity and toxicity, inherent biodegradability, and fast responses to a wide range of external stimuli. After about two decades of development, peptide-based supramolecular nanostructures have already shown great potentials in the fields of biomedicine. Among a range of biomedical applications, using such nanostructures for cancer therapy has attracted increased interests since cancer remains the major threat for human health. Comparing with L-peptides, nanostructures containing peptides made of D-amino acid (i.e., D-peptides) bear a unique advantage, biostability (i.e., resistance towards most of endogenous enzymes). The exploration of nanostructures containing D-amino acids, especially their biomedical applications, is still in its infancy. Herein we review the recent progress of D-amino acid-containing supramolecular nanofibers as an emerging class of biomaterials that exhibit unique features for the development of cancer therapeutics. In addition, we give a brief perspective about the challenges and promises in this research direction.

Controlling gelation with sequence: Towards programmable peptide hydrogels

The self-assembling peptide IKHLSVN, inspired by inspection of a protein-protein interface, has previously been reported as one of a new class of bio-inspired peptides. Here the peptide, dubbed littleSven, and modifications designed to probe the resilience of the sequence to self-assembly, is characterised. Although the parent peptide did not form a hydrogel, small modifications to the sequence (one side chain or an N-terminus modification) led to hydrogels with properties (eg. gelation time and rheology) that could be tuned by these small alterations. The results suggest that peptides derived from protein-protein interfaces are resilient to changes in sequence and can be harnessed to form hydrogels with controlled properties.

STATEMENT OF SIGNIFICANCE

Natural occurring self-assembly peptides are attractive building blocks for engineered bionanomaterials due to their biocompatibility and biodegradability. The bio-inspired self-assembly peptide, IKHLSVN, was used as a template to design peptides that readily formed hydrogels. The peptide sequence was specifically tuned to create a bionanomaterial with different properties that could be exploited downstream for a broad range of applications: nanowires, drug release, vaccine adjuvant, tissue engineering. We describe how small modifications to the parent peptide alter the amyloid-like characteristics and gel strength for each peptide.

Supramolecular polymer formation by cyclic dinucleotides and intercalators affects dinucleotide enzymatic processing

Background:

Cyclic dinucleotides form supramolecular aggregates with intercalators, and this property could be utilized in nanotechnology and medicine.

Methods & results:

Atomic force microscopy and electrophoretic mobility shift assays were used to show that cyclic diguanylic acid (c-di-GMP) forms G-wires in the presence of intercalators. The average fluorescence lifetime of thiazole orange, when bound to c-di-GMP was greater than when bound to DNA G-quadruplexes or dsDNA. The stability of c-di-GMP supramolecular polymers is dependent on both the nature of the cation present and the intercalator. C-di-GMP or cyclic diadenylic acid/intercalator complexes are more resistant to cleavage by YybT, a phosphodiesterase, than the uncomplexed nucleotides.

Conclusion:

Cleavage of bacterial cyclic dinucleotides could be slowed down via complexation with small molecules and that this could be utilized for diverse applications in nanotechnology and medicine.

Lay abstract: Bacteria respond to a changing environment and nutrient availability by regulating key metabolic processes. Cyclic dinucleotides are now understood to play pivotal roles in transmitting information about the environment to macromolecular targets, which modulate the bacterial phenotype. In this paper, we demonstrate that these important bacterial second messengers can be aggregated with other small molecules and this process could potentially be used to affect how bacteria sense the environment.

Synthesis and biomedical applications of fluorescent nanogels

Fluorescent nanogel is an innovative biomedical material with hydroscopicity, degradability, and responsiveness.

Cell membrane permeable fluorescent perylene bisimide derivatives for cell lysosome imaging

The cellular uptake of Lyso-APBIprobes is improved by PEG chains, and the double morpholine moieties make Lyso-APBI probes have higher acid activation ratio and better cell lysosome specificity.