Iridium nanoparticles supported on hierarchical porous N-doped carbon: an efficient water-tolerant catalyst for bio-alcohol condensation in water

Structural Evolution of MOF-Derived RuCo, A General Catalyst for the Guerbet Reaction

Guerbet alcohols, a class of β-branched terminal alcohols, find widespread application because of their low melting points and excellent fluidity. Because of the limitations in the activity and selectivity of existing Guerbet catalysts, Guerbet alcohols are not currently produced via the Guerbet reaction but via hydroformylation of oil-derived alkenes followed by aldol condensation. In pursuit of a one-step synthesis of Guerbet alcohols from simple linear alcohol precursors, we show that MOF-derived RuCo alloys achieve over a million turnovers in the Guerbet reaction of 1-propanol, 1-butanol, and 1-pentanol. The active catalyst is formed in situ from ruthenium-impregnated metal-organic framework MFU-1. XPS and XAS studies indicate that the precatalyst is composed of Ru precursor trapped inside the MOF pores with no change in the oxidation state or coordination environment of Ru upon MOF incorporation. The significantly higher reactivity of Ru-impregnated MOF versus a physical mixture of Ru precursor and MOF suggests that the MOF plays an important role in templating the formation of the active catalyst and/or its stabilization. XPS reveals partial reduction of both ruthenium and MOF-derived cobalt under the Guerbet reaction conditions, and TEM/EDX imaging shows that Ru is decorated on the edges of dense nanoparticles, as well as thin nanoplates of CoOx. The use of ethanol rather than higher alcohols as a substrate results in lower turnover frequencies, and RuCo recovered from ethanol upgrading lacks nanostructures with plate-like morphology and does not exhibit Ru-enrichment on the surface and edge sites. Notably, 1H and 31P NMR studies show that through use of K3PO4 as a base promoter in the RuCo-catalyzed alcohol upgrading, the formation of carboxylate salts, a common side product in the Guerbet reaction, was effectively eliminated.

Effect of Air Oxidation on Texture, Surface Properties and Dye Adsorption of Wood-Derived Porous Carbon Materials

Hierarchical porous carbon materials made from cork were fabricated using a facile and green method combined with air activation, without any templates and chemical agents. The influence of air activation on the texture and other surface characteristics of the carbon materials were evaluated by various characterization techniques. Results indicate that air oxidation can effectively improve the surface area and the hierarchical porous structure of carbon materials, as well as increase the number of oxygen-containing functional groups on the carbon surface. The specific surface area and the pore volume of the carbon material activated by air at 450 °C (C800-M450) can reach 580 m²/g and 0.379 cm³/g, respectively. These values are considerably higher than those for the non-activated material (C800, 376 m²/g, 0.201 cm³/g). The contents of the functional groups (C-O, C=O and O-H) increased with rising activation temperature. After air activation, the adsorption capacity of the carbon materials for methylene blue (MB) and methyl orange (MO) was increased from 7.7 and 6.4 mg/g for C800 to 312.5 and 97.1 mg/g for C800-M450, respectively. The excellent dye removal of the materials suggests that the porous carbon obtained from biomass can be potentially used for wastewater treatment.

Hydrothermal Galvanic-Replacement-Tethered Synthesis of Ir-Ag-IrO2 Nanoplates for Computed Tomography-Guided Multiwavelength Potent Thermodynamic Cancer Therapy

Beyond the synthesis of typical nanocrystals, various breakthrough approaches have been developed to provide more useful structural features and functionalities. Among them, galvanic replacement, a structural transformation reaction accompanied by constituent element substitution, has been applied to various areas. However, the innovative improvement for galvanic replacement needs to be considered because of the limitation of applicable element pairs to maintain structural stability. To expand the boundary of galvanic-replacement-mediated synthesis, we have become interested in the Group 9 metallic element Ir, which is considered a fascinating element in the field of catalysis, but whose size and shape regulation has been conventionally regarded as difficult. To overcome the current limitations, we developed a hydrothermal galvanic-replacement-tethered synthetic route to prepare Ir-Ag-IrO₂ nanoplates (IrNPs) with a transverse length of tens of nanometers and a rough surface morphology. A very interesting photoreactivity was observed from the prepared IrNPs, with Ag and IrO₂ coexisting partially, which showed photothermal conversion and photocatalytic activity at different ratios against extinction wavelengths of 473, 660, and 808 nm. The present IrNP platform showed excellent photothermal conversion efficiency under near-infrared laser irradiation at 808 nm and also represented an effective cancer treatment in vitro and in vivo through a synergistic effect with reactive oxygen species (ROS) generation. In addition, computed tomography (CT) imaging contrast effects from Ir and IrO₂ composition were also clearly observed.

Catalytic Organic Reactions in Water toward Sustainable Society

Traditional organic synthesis relies heavily on organic solvents for a multitude of tasks, including dissolving the components and facilitating chemical reactions, because many reagents and reactive species are incompatible or immiscible with water. Given that they are used in vast quantities as compared to reactants, solvents have been the focus of environmental concerns. Along with reducing the environmental impact of organic synthesis, the use of water as a reaction medium also benefits chemical processes by simplifying operations, allowing mild reaction conditions, and sometimes delivering unforeseen reactivities and selectivities. After the "watershed" in organic synthesis revealed the importance of water, the development of water-compatible catalysts has flourished, triggering a quantum leap in water-centered organic synthesis. Given that organic compounds are typically practically insoluble in water, simple extractive workup can readily separate a water-soluble homogeneous catalyst as an aqueous solution from a product that is soluble in organic solvents. In contrast, the use of heterogeneous catalysts facilitates catalyst recycling by allowing simple centrifugation and filtration methods to be used. This Review addresses advances over the past decade in catalytic reactions using water as a reaction medium.

Selective Semihydrogenation of Alkynes Catalyzed by Pd Nanoparticles Immobilized on Heteroatom-Doped Hierarchical Porous Carbon Derived from Bamboo Shoots

Highly dispersed palladium nanoparticles (Pd NPs) immobilized on heteroatom-doped hierarchical porous carbon supports (N,O-carbon) with large specific surface areas are synthesized by a wet chemical reduction method. The N,O-carbon derived from naturally abundant bamboo shoots is fabricated by a tandem hydrothermal-carbonization process without assistance of any templates, chemical activation reagents, or exogenous N or O sources in a simple and ecofriendly manner. The prepared Pd/N,O-carbon catalyst shows extremely high activity and excellent chemoselectivity for semihydrogenation of a broad range of alkynes to versatile and valuable alkenes under ambient conditions. The catalyst can be readily recovered for successive reuse with negligible loss in activity and selectivity, and is also applicable for practical gram-scale reactions.

A novel hierarchical porous nitrogen-doped carbon derived from bamboo shoot for high performance supercapacitor

Porous N-doped carbons hold good prospects for application in supercapacitor due to their low-cost, large surface area, good surface wettability, high electrical conductivity as well as extra pseudocapacitance. However, most synthetic methods required the tedious and multiple-step process with the assistance of hard/soft templates or the massive use of chemical reagents, and exogenous nitrogen sources, which made them difficult to realize industrial production and application. Here, we described a novel hierarchical porous N-doped carbons fabricated by a facile and sustainable approach via hydrothermal treatment and subsequent carbonization process by using renewable bamboo shoots as the starting material without any templates, additional chemical activation and nitrogen source. The obtained bamboo shoot-derived carbons possessed a large BET surface area (up to 972 m² g⁻¹), hierarchically interconnected porous framework, rich and uniform nitrogen incorporation (3.0 at%). Benefiting from these unique features, the novel carbon-based electrode materials displayed a high capacitance of 412 F g⁻¹ in KOH electrolyte and long cycling life stability. Thus, an advanced electrode material for high-performance supercapacitor was successfully assembled by a simple and scalable synthesis route with abundant renewable resources freely available in nature.

Complete Decomposition of Li2CO3 in Li-O2 Batteries Using Ir/B4C as Noncarbon-Based Oxygen Electrode

Instability of carbon-based oxygen electrodes and incomplete decomposition of Li₂CO₃ during charge process are critical barriers for rechargeable Li-O₂ batteries. Here we report the complete decomposition of Li₂CO₃ in Li-O₂ batteries using the ultrafine iridium-decorated boron carbide (Ir/B₄C) nanocomposite as a noncarbon based oxygen electrode. The systematic investigation on charging the Li₂CO₃ preloaded Ir/B₄C electrode in an ether-based electrolyte demonstrates that the Ir/B₄C electrode can decompose Li₂CO₃ with an efficiency close to 100% at a voltage below 4.37 V. In contrast, the bare B₄C without Ir electrocatalyst can only decompose 4.7% of the preloaded Li₂CO₃. Theoretical analysis indicates that the high efficiency decomposition of Li₂CO₃ can be attributed to the synergistic effects of Ir and B₄C. Ir has a high affinity for oxygen species, which could lower the energy barrier for electrochemical oxidation of Li₂CO₃. B₄C exhibits much higher chemical and electrochemical stability than carbon-based electrodes and high catalytic activity for Li-O₂ reactions. A Li-O₂ battery using Ir/B₄C as the oxygen electrode material shows highly enhanced cycling stability than those using the bare B₄C oxygen electrode. Further development of these stable oxygen-electrodes could accelerate practical applications of Li-O₂ batteries.

Tunable and selective hydrogenation of furfural to furfuryl alcohol and cyclopentanone over Pt supported on biomass-derived porous heteroatom doped carbon

The search for and exploitation of efficient catalytic systems for selective conversion of furfural into various high value-added chemicals remains a huge challenge for green synthesis in the chemical industry. Here, novel Pt nanoparticles supported on bamboo shoot-derived porous heteroatom doped carbon materials were designed as highly active catalysts for controlled hydrogenation of furfural in aqueous media. The porous heteroatom doped carbon supported Pt catalysts were endowed with a large surface area with a hierarchical porous structure, a high content of nitrogen and oxygen functionalities, a high dispersion of the Pt nanoparticles, good water dispersibility and reaction stability. Benefiting from these features, the novel Pt catalysts displayed a high activity and controlled tunable selectivity for furfural hydrogenation to produce furfuryl alcohol and cyclopentanone in water. The product selectivity could be easily modulated by controlling the carbonization temperature of the porous heteroatom doped carbon support and the reaction conditions (temperature and H₂ pressure). Under mild conditions (100 °C, 1 MPa H₂), furfuryl alcohol was obtained in water with complete conversion of the furfural and an impressive furfuryl alcohol selectivity of >99% in the presence of Pt/NC-BS-500. A higher reaction temperature, in water, favored rearrangement of the furfural (FFA) with Pt/NC-BS-800 as the catalyst, which resulted in a high cyclopentanone yield of >76% at 150 °C and 3 MPa H₂. The surface properties and pore structure of the heteroatom doped carbon support, adjusted using the carbonization temperature, might determine the interactions between the Pt nanoparticles, carbon support and catalytic reactants in water, which in turn could have led to a good selectivity control. The effect of different reaction temperatures and reaction times on the product selectivity was also explored. Combined with exploration of the distribution of the reaction products, a reaction mechanism for furfural reduction has been proposed.

Highly selective hydrogenation of furfural to furfuryl alcohol over Pt nanoparticles supported on g-C3N4 nanosheets catalysts in water

Graphitic carbon nitride nanosheets were investigated for developing effective Pt catalyst supports for selective hydrogenation of furfural to furfuryl alcohol in water. The nanosheets with an average thickness of about 3 nm were synthesized by a simple and green method through thermal oxidation etching of bulk g-C₃N₄ in air. Combined with the unique feature of nitrogen richness and locally conjugated structure, the g-C₃N₄ nanosheets with a high surface area of 142 m² g⁻¹ were demonstrated to be an excellent supports for loading small-size Pt nanoparticles. Superior furfural hydrogenation activity in water with complete conversion of furfural and high selectivity of furfuryl alcohol (>99%) was observed for g-C₃N₄ nanosheets supported Pt catalysts. The large specific surface area, uniform dispersion of Pt nanoparticles and the stronger furfural adsorption ability of nanosheets contributed to the considerable catalytic performance. The reusability tests showed that the novel Pt catalyst could maintain high activity and stability in the furfural hydrogenation reaction.

Nitrogen-doped porous carbon materials: promising catalysts or catalyst supports for heterogeneous hydrogenation and oxidation

Developing novel and efficient catalysts is a critical step in common heterogeneous hydrogenation and oxidation reactions.