Surface Molecularly Imprinted Polymer of Chitosan Grafted Poly(methyl methacrylate) for 5-Fluorouracil and Controlled Release

Quantum Insights into Partially Molecular Imprinted Microspheres for Anticancer Therapeutics: Experimental and Theoretical Studies

Drug solubility is a determining factor for controlled release, and solubility-dependent release kinetics can be modified by changing the drug's state in the polymer matrix through partial molecular imprinting (PMI), although research in this area remains limited. This novel PMI approach creates nanocavities within the polymer by partially retaining the imprinting molecule and trapping the drug. Such a method holds promise for developing advanced biomaterial-based drug delivery systems for anticancer therapies. In this study, we developed microspheres designed for anticancer drug delivery utilizing PMI to enhance controlled release properties. Poly(vinyl alcohol) (PVA) microspheres were partially imprinted with aspirin (ASP) to create nanocavities for gemcitabine (GEM) molecules, inducing a polymorphic shift of GEM within the polymer matrix. This novel PMI approach enhanced drug release properties by enabling control over the drug crystallinity and release rate. The PVA-ASP-GEM complex showed zero-order release kinetics, releasing 21.6% of GEM over 48 h, maintaining steady state release profile. In contrast, nonimprinted PVA-GEM microspheres exhibited first-order kinetics with a faster release of 46.85% in the same period. Quantum insights from density functional theory (DFT) calculations revealed the superior stability of the PVA-ASP-GEM complex, with a binding free energy of -56.03 kcal/mol, compared to -29.07 kcal/mol for PVA-GEM. Molecular dynamics (MD) simulations demonstrated that ASP's presence created nanocavities that restricted GEM's movement, further contributing to the controlled release. Experimental validation through differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Raman spectroscopy confirmed the polymorphic transitions within the PVA-ASP-GEM complex. This PMI-based approach offers a promising method for modulating drug release kinetics and improving the stability of anticancer therapeutics, paving the way for innovative biomaterial-based drug delivery systems.

Chitosan-graphene quantum dot-based molecular imprinted polymer for oxaliplatin release

Molecularly imprinted polymers (MIPs) have garnered the interest of researchers in the drug delivery due to their advantages, such as exceptional durability, stability, and selectivity. In this study, a biocompatible MIP drug adsorption and delivery system with high loading capacity and controlled release, was prepared based on chitosan (CS) and graphene quantum dots (GQDs) as the matrix, and the anticancer drug oxaliplatin (OXAL) as the template. Additionally, samples without the drug (non-imprinted polymers, NIPs) were created for comparison. GQDs were produced using the hydrothermal method, and samples underwent characterization through FTIR, XRD, FESEM, and TGA. Various experiments were conducted to determine the optimal pH for drug adsorption, along with kinetic and isotherm studies, selectivity assessments, in vitro drug release and kinetic evaluations. The highest drug binding capacity was observed at pH 6.5. The results indicated the Lagergren-first-order kinetic model (with rate constant of 0.038 min-1) and the Langmuir isotherm (with maximum adsorption capacity of 17.15 mg g-1) exhibited better alignment with the experimental data. The developed MIPs displayed significant selectivity towards OXAL, by an imprinting factor of 2.88, in comparison to two similar drugs (cisplatin and carboplatin). Furthermore, the analysis of the drug release profile showed a burst release for CS-Drug (87% within 3 h) at pH 7.4, where the release from the CS-GQD-Drug did not occur at pH 7.4 and 10; instead, the release was observed at pH 1.2 in a controlled manner (100% within 28 h). Consequently, this specific OXAL adsorption and delivery system holds promise for cancer treatment.

Antibacterial and Osteogenic Doxycycline Imprinted Bioglass Microspheres to Combat Bone Infection

Currently, postoperative infection is a significant challenge in bone and dental surgical procedures, demanding the exploration of innovative approaches due to the prevalence of antibiotic-resistant bacteria. This study aims to develop a strategy for controlled and smart antibiotic release while accelerating osteogenesis to expedite bone healing. In this regard, temperature-responsive doxycycline (DOX) imprinted bioglass microspheres (BGMs) were synthesized. Following the formation of chitosan-modified BGMs, poly N-isopropylacrylamide (pNIPAm) was used for surface imprinting of DOX. The temperature-responsive molecularly imprinted polymers (MIPs) exhibited pH and temperature dual-responsive adsorption and controlled-release properties for DOX. The temperature-responsive MIP was optimized by investigating the molar ratio of N,N'-methylene bis(acrylamide) (MBA, the cross-linker) to NIPAm. Our results demonstrated that the MIPs showed superior adsorption capacity (96.85 mg/g at 35 °C, pH = 7) than nonimprinted polymers (NIPs) and manifested a favorable selectivity toward DOX. The adsorption behavior of DOX on the MIPs fit well with the Langmuir model and the pseudo-second-order kinetic model. Drug release studies demonstrated a controlled release of DOX due to imprinted cavities, which were fitted with the Korsmeyer-Peppas kinetic model. DOX-imprinted BGMs also revealed comparable antibacterial effects against Staphylococcus aureus and Escherichia coli to the DOX (control). In addition, MIPs promoted viability and osteogenic differentiation of MG63 osteoblast-like cells. Overall, the findings demonstrate the significant potential of DOX-imprinted BGMs for use in bone defects. Nonetheless, further in vitro investigations and subsequent in vivo experiments are warranted to advance this research.

Chloramphenicol-imprinted polychitosan bounded with carbon dots as fluorescent sensor, dispersive sorbent, and drug carrier

Chitosan, an abundant natural polysaccharide, was conjugated with carbon dots (CDs) and self-polymerized with chloramphenicol (CAP) templates to synthesize CD-incorporated and molecularly CAP-imprinted polychitosan (CD-MIC). The CD-MIC was used for fluorescent sensing, dispersive sorption, and dosage release of CAP at different pH levels. The sphere of action mechanism, approved by emission and excitation fluorescence, UV-Vis absorption, and fluorescence lifetime measurements, regulated the fluorescence static quenching. By the Perrin model, the quenching extent was linearly correlated to CAP within 0.17 - 33.2 μM (LOD = 37 nM) at pH 7.0. With an imprinting factor of 3.1, the CD-MIC was more selective for CAP than CD, although it was less sensitive to CAP. The recoveries of 5.0 μM CAP from milk matrix were 95% (RSD = 2.3%) for CD-MIC probes and 62% (RSD = 4.5%) for CD. The Langmuir and pseudo-second-order models preferably described the isothermal and kinetic sorptions of CAP into the imprinted cavities in CD-MICs, respectively. The Weber - Morris kinetic model showed three stages involved in intraparticle diffusion, which was pH-dependent and gradually arduous at the later stage, and showed external diffusion partly engaged in the diffusion mechanism. The 20 - 70% of CAP formulated in CAP-embedded CD-MICs were released in 8 - 48 h. The release percentage was lower at pH 7.0 than at pH 5.0 and 9.0, but the equilibrium time was shorter. At pH 7.0, the release percentage reached 45% at 10 min and slowly increased to 51% at 24 h.

Specifics of Pharmacokinetics and Biodistribution of 5-Fluorouracil Polymeric Complex

One of the promising and relevant directions in the treatment of oncological diseases is currently the development of a system for the delivery of antitumor drugs based on polyanions. Therefore, the aim of this work was to study the specifics of pharmacokinetics and biodistribution of a 5-Fluorouracil polymeric complex compared with commercial 5-Fluorouracil.

MATERIALS AND METHODS

Monomeric methacrylic acid was used to synthesize polymers; 2-phenylpropane-2-ilbenzodithioate was used for the synthesis of poly(methacrylic acid). To study the molecular-weight characteristics of poly(methacrylic acid) by gel permeation chromatography, an experimental neoplasm model was obtained by grafting PC-1 cancer cells. Blood samples were drawn from the tail vein at different points in time. The rats were sacrificed via decapitation after drawing the last pharmacokinetic blood sample. To study the biodistribution, internal organs were isolated and analyzed. The measurements were carried out by high-performance liquid chromatography.

RESULTS

Our results demonstrate that incorporation in a polymeric complex changes the pharmacokinetics and biodistribution profile of 5-FU. The polymeric complex was shown to accumulate to a higher level in the lung and spleen.

CONCLUSION

The results obtained are the basis for further studies to verify the efficacy of the 5-Fluorouracil polymeric complex.

Tailoring Homogeneous Hydrogel Nanospheres by Facile Ultra-Sonication Assisted Cross-Linked Copolymerization for Rhodamine B Dye Adsorption

The present paper describes the design of shape-oriented hydrogel nanospheres using a facile ultrasonication-supported crosslinked copolymerization technique. The effect of variable monomer concentration on the homogeneity of hydrogel nanospheres was investigated. The chitosan-cl-poly(MMA) hydrogel nanospheres were well characterized using various techniques such as FTIR, XRD, TGA, SEM, and TEM. The chitosan-cl-poly(MMA) hydrogel nanospheres were studied for their swelling behavior and could potentially be used as a novel adsorbent for rhodamine B dye remediation from aqueous media. The study found that utilizing chitosan-cl-poly(MMA) nanohydrogel spheres at the optimal pH 5 increased RhB dye adsorption capacity from 7.9 to 17.8 mg/g (pH 2 to 5), followed by a slight reduction. Furthermore, when nanohydrogel concentration increased, adsorption capacity dropped from 18.03 to 2.8 mg/g, but adsorption percentage climbed from 90.2% to 97.8%. At an initial dye concentration of 140 mg/L, rhodamine B adsorption achieved 204.3 mg/g in 60 min. The rhodamine B dye adsorption study includes adsorption kinetics, isotherm, and thermodynamics analyses. The interpretation of the adsorption study revealed that Langmuir isotherms fit best with a qmax value of 276.26 mg/g, which is in close approximation with the experimental value, whereas pseudo-second-order kinetics explains the adsorption process rate. The interaction of RhB dye with chitosan-cl-poly(MMA) hydrogel nanospheres involves multiple forces such as electrostatic interactions, hydrogen bonding, van der Waals forces, etc.

A Sensitive Micro Conductometric Ethanol Sensor Based on an Alcohol Dehydrogenase-Gold Nanoparticle Chitosan Composite

In this paper, a microconductometric sensor has been designed, based on a chitosan composite including alcohol dehydrogenase-and its cofactor-and gold nanoparticles, and was calibrated by differential measurements in the headspace of aqueous solutions of ethanol. The role of gold nanoparticles (GNPs) was crucial in improving the analytical performance of the ethanol sensor in terms of response time, sensitivity, selectivity, and reproducibility. The response time was reduced to 10 s, compared to 21 s without GNPs. The sensitivity was 416 µS/cm (v/v%)-1 which is 11.3 times higher than without GNPs. The selectivity factor versus methanol was 8.3, three times higher than without GNPs. The relative standard deviation (RSD) obtained with the same sensor was 2%, whereas it was found to be 12% without GNPs. When the air from the operator's mouth was analyzed just after rinsing with an antiseptic mouthwash, the ethanol content was very high (3.5 v/v%). The background level was reached only after rinsing with water.

Factors Affecting the Analytical Performance of Magnetic Molecularly Imprinted Polymers

During the last few years, separation techniques using molecular imprinting polymers (MIPs) have been developed, making certain improvements using magnetic properties. Compared to MIP, Magnetic molecularly imprinted polymers (MMIPs) have high selectivity in sample pre-treatment and allow for fast and easy isolation of the target analyte. Its magnetic properties and good extraction performance depend on the MMIP synthesis step, which consists of 4 steps, namely magnetite manufacture, magnetic coating using modified components, polymerization and template desorption. This review discusses the factors that will affect the performance of MMIP as a selective sorbent at each stage. MMIP, using Fe₃O₄ as a magnetite core, showed strong superparamagnetism; it was prepared using the co-precipitation method using FeCl₃·6H₂O and FeCl₂·H₂O to obtain high magnetic properties, using NH₄OH solution added for higher crystallinity. In magnetite synthesis, the use of a higher temperature and reaction time will result in a larger nanoparticle size and high magnetization saturation, while a higher pH value will result in a smaller particle size. In the modification step, the use of high amounts of oleic acid results in smaller nanoparticles; furthermore, determining the correct molar ratio between FeCl₃ and the shielding agent will also result in smaller particles. The next factor is that the proper ratio of functional monomer, cross-linker and solvent will improve printing efficiency. Thus, it will produce MMIP with high selectivity in sample pre-treatment.

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

5-Fluorouracil Encapsulated Chitosan-Cellulose Fiber Bionanocomposites: Synthesis, Characterization and In Vitro Analysis towards Colorectal Cancer Cells

Cellulose and chitosan with remarkable biocompatibility and sophisticated physiochemical characteristics can be a new dawn to the advanced drug nano-carriers in cancer treatment. This study aims to synthesize layer-by-layer bionanocomposites from chitosan and rice straw cellulose encapsulated 5-Fluorouracil (CS-CF/5FU BNCs) using the ionic gelation method and the sodium tripolyphosphate (TPP) cross-linker. Data from X-ray and Fourier-transform infrared spectroscopy showed successful preparation of CS-CF/5FU BNCs. Based on images of scanning electron microscopy, 48.73 ± 1.52 nm was estimated for an average size of the bionanocomposites as spherical chitosan nanoparticles mostly coated rod-shaped cellulose reinforcement. 5-Fluorouracil indicated an increase in thermal stability after its encapsulation in the bionanocomposites. The drug encapsulation efficiency was found to be 86 ± 2.75%. CS-CF/5FU BNCs triggered higher drug release in a media simulating the colorectal fluid with pH 7.4 (76.82 ± 1.29%) than the gastric fluid with pH 1.2 (42.37 ± 0.43%). In in vitro cytotoxicity assays, cellulose fibers, chitosan nanoparticles and the bionanocomposites indicated biocompatibility towards CCD112 normal cells. Most promisingly, CS-CF/5FU BNCs at 250 µg/mL concentration eliminated 56.42 ± 0.41% of HCT116 cancer cells and only 8.16 ± 2.11% of CCD112 normal cells. Therefore, this study demonstrates that CS-CF/5FU BNCs can be considered as an eco-friendly and innovative nanodrug candidate for potential colorectal cancer treatment.

Chitosan/PCL nanoparticles can improve anti-neoplastic activity of 5-fluorouracil in head and neck cancer through autophagy activation

Head and neck squamous cell carcinoma (HNSCC), a prevalent cancer worldwide, has a high incidence of loco-regional dissemination, frequent recurrence, and lower 5-year survival rates. Current gold standard treatments for advanced HNSCC rely primarily on radiotherapy and chemotherapy but with limited efficacy and significant side effects. In this study, we characterized a novel 5-fluorouracil (5-FU) carrier composed of chitosan solution (CS) and polycaprolactone (PCL) microparticles (MPs) in HNSCC preclinical models. The designed MPs were evaluated for their size, morphology, drug entrapment efficiency (EE%) and in vitro drug release profile. The anti-cancer activity of 5-FU-loaded particles was assessed in HNSCC human cell lines (CAL27 and HSC3) and in a preclinical mouse model (AT84) utilizing cell proliferation and survival, cell motility, and autophagy endpoints. The results demonstrated a 38.57 % in 5-FU entrapment efficiency associated with reduced 5-FU in vitro release up to 96 h post-exposure. Furthermore, CS-decorated PCL MPs were able to promote a significant inhibition of cancer cell proliferation based on the metabolic and colony formation assays, in comparison to controls. In contrast, CS-decorated PCL MPs did not influence the pharmacological efficacy of 5-FU to inhibit in vitro cancer cell migration. Last, cell protein analysis revealed a significant increase of autophagy and cell death evaluated by LC3-II expression and PARP1 cleavage, respectively. In summary, these results support the potential utility of CS-decorated PCL MPs as an effective 5-FU-delivery carrier to improve HNSCC therapeutic management.

Apoptosis pathway in the combined treatment of x-ray and 5-FU-loaded triblock copolymer-coated magnetic nanoparticles

Aim: In this study, the effects of ionizing radiation and 5-fluorouracil (5-FU)-loaded triblock copolymer-coated magnetic nanoparticles (NPs) on the induction of apoptosis in HT-29 and HCT-116 were investigated. Materials & methods: The percentage of apoptotic cells and alteration of the expression of apoptotic-related proteins were evaluated in treated cells by flow cytometry and western blot analysis, respectively. Results: Combination treatment with 5-FU and radiation had a stronger effect on decreasing Bcl-2 expression and increasing expression of Bax, cleaved caspase-9, cleaved caspase-3, cleaved PARP compared with each treatment alone. Conclusion: The combination of radiation and triblock copolymer-coated magnetic NPs as 5-FU drug carriers works by triggering apoptosis to improve in vitro treatment efficacy. Additional study may present the NPs as an effective approach for the treatment of colon cancer.

Developments of Smart Drug-Delivery Systems Based on Magnetic Molecularly Imprinted Polymers for Targeted Cancer Therapy: A Short Review

Cancer therapy is still a huge challenge, as especially chemotherapy shows several drawbacks like low specificity to tumor cells, rapid elimination of drugs, high toxicity and lack of aqueous solubility. The combination of molecular imprinting technology with magnetic nanoparticles provides a new class of smart hybrids, i.e., magnetic molecularly imprinted polymers (MMIPs) to overcome limitations in current cancer therapy. The application of these complexes is gaining more interest in therapy, due to their favorable properties, namely, the ability to be guided and to generate slight hyperthermia with an appropriate external magnetic field, alongside the high selectivity and loading capacity of imprinted polymers toward a template molecule. In cancer therapy, using the MMIPs as smart-drug-delivery robots can be a promising alternative to conventional direct administered chemotherapy, aiming to enhance drug accumulation/penetration into the tumors while fewer side effects on the other organs. Overview: In this review, we state the necessity of further studies to translate the anticancer drug-delivery systems into clinical applications with high efficiency. This work relates to the latest state of MMIPs as smart-drug-delivery systems aiming to be used in chemotherapy. The application of computational modeling toward selecting the optimum imprinting interaction partners is stated. The preparation methods employed in these works are summarized and their attainment in drug-loading capacity, release behavior and cytotoxicity toward cancer cells in the manner of in vitro and in vivo studies are stated. As an essential issue toward the development of a body-friendly system, the biocompatibility and toxicity of the developed drug-delivery systems are discussed. We conclude with the promising perspectives in this emerging field. Areas covered: Last ten years of publications (till June 2020) in magnetic molecularly imprinted polymeric nanoparticles for application as smart-drug-delivery systems in chemotherapy.

Recent Advances in Designing 5-Fluorouracil Delivery Systems: A Stepping Stone in the Safe Treatment of Colorectal Cancer

5-Fluorouracil (5-FU) has become one of the most widely employed antimetabolite chemotherapeutic agents in recent decades. It is considered a first line antineoplastic agent for the treatment of colorectal cancer. Unfortunately, chemotherapy with 5-FU has several limitations, including its short half-life, high cytotoxicity and low bioavailability. In order to overcome the drawbacks of 5-FU and enhance its therapeutic efficiency, many scientific groups have focused on designing a new delivery system to successfully deliver 5-FU to tumor sites. We provide a comprehensive review on different strategies to design effective delivery systems, including nanoformulations, drug-conjugate formulations and other strategies for the delivery of 5-FU to colorectal cancer. Furthermore, co-delivery of 5-FU with other therapeutics is discussed. This review critically highlights the recent innovations in and literature on various types of carrier system for 5-FU.

Luminescent chitosan/carbon dots as an effective nano-drug carrier for neurodegenerative diseases

Designing new materials for effective and targeted drug delivery is pivotal in biomedical research. Herein, we report on the development of a chitosan/carbon dot-based nanocomposite and investigate its efficacy as a carrier for the sustained release of dopamine drug. The carbon dots (CDs) were synthesized from the carbonization of chitosan and were further conjugated with chitosan (CS) to obtain a chitosan/carbon dot (CS/CD) matrix. Dopamine was later encapsulated in the matrix to form a dopamine@CS/CD nanocomposite. The cytotoxicity of IC-21 and SH-SY5Y cell lines was studied at various concentrations of the nanocomposite and the results demonstrate around 97% cell viability. The photoluminescence property revealed the characteristic property of the carbon dots. When excited at 510 nm an emission peak was observed at 550 nm which enables the use of carbon dots as a tracer for bioimaging. The HRTEM images and the D, G, and 2D bands of the Raman spectra confirm the successful synthesis of carbon dots and through DLS the particle size is estimated to be ∼3 nm. The release studies of the encapsulated drug from the composite were analyzed in an in vitro medium at different pH levels. The novelty of this method is the use of a non-toxic vehicle to administer drugs effectively towards any ailment and in particular, the carbon dots facilitate the consistent release of dopamine towards neurodegenerative diseases and tracing delivery through bioimaging.

Enhanced performance of chitosan/keratin membranes with potential application in peripheral nerve repair

Although surgical management of peripheral nerve injuries (PNIs) has improved over time, autografts are still the current "gold standard" treatment for PNIs, which presents numerous limitations. In an attempt to improve natural biomaterial-based nerve guidance conduits (NGCs), chitosan (CHT), a derivative of the naturally occurring biopolymer chitin, has been explored for peripheral nerve regeneration (PNR). In addition to CHT, keratin has gained enormous attention as a biomaterial and tissue engineering scaffolding. In this study, biomimetic CHT/keratin membranes were produced using a solvent casting technique. These membranes were broadly characterized in terms of their surface topography and physicochemical properties, with techniques such as Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), contact angle, weight loss and water uptake measurements, Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). Biological in vitro assays were also performed, where a preliminary cytotoxicity screening with the L929 fibroblast cell line revealed that the membranes and respective materials are suitable for cell culture. In addition, Schwann cells, fibroblasts and endothelial cells were directly seeded in the membranes. Quantitative and qualitative assays revealed that the addition of keratin enhanced cell viablity and adhesion. Based on the encouraging in vitro results, the in vivo angiogenic/antiangiogenic potential of CHT and CHT/keratin membranes was assessed, using an optimized chick embryo chorioallantoic membrane assay, where higher angiogenic responses were seen in keratin-enriched materials. Overall, the obtained results indicate the higher potential of CHT/keratin membranes for guided tissue regeneration applications in the field of PNR.

Microfluidic-Assisted Preparation of 5-Fluorouracil-Loaded PLGA Nanoparticles as a Potential System for Colorectal Cancer Therapy

This work aims at fabricating 5-fluorouracil (5-FU)-loaded poly (lactic-co-glycolic) acid nanoparticles (PLGA NPs) using a microfluidic (MF) technique, with potential for use in colorectal cancer therapy. In order to achieve 5-FU-loaded NPs with an average diameter of approximately 119 nm, the parameters of MF process with fork-shaped patterns were adjusted as follows: the ratio of polymer to drug solutions flow rates was equal to 10 and the solution concentrations of PLGA as carrier, 5-FU as anti-cancer drug and poly (vinyl alcohol) (PVA) as surfactant were 0.2 (% w/v), 0.01 (% w/v) and 0.15 (% w/v), respectively. In this way, a drug encapsulation efficiency of approximately 95% into the PLGA NPs was obtained, due to the formation of a hydrodynamic flow focusing phenomenon through the MF chip. A performance evaluation of the NP samples in terms of the drug release, cytotoxicity and cell death was carried out. Finally, by analyzing the results after induction of cell death and 4', 6-diamidino-2-phenylin-dole (DAPI) staining, MF-fabricated NPs containing 5-FU [0.2 (% w/v) of PLGA] revealed the dead cell amounts of 10 and 1.5-fold higher than the control sample for Caco2 and SW-480, respectively.

Synthesis of polyacrylonitrile nanoflowers and their controlled pH-sensitive drug release behavior

A novel controlled drug release system based on pH sensitive polyacrylonitrile (PAN) nanoflowers in different kinds of solvents was successfully prepared with azobisisobutyronitrile (AIBN) as the initiator and without any emulsifier or stabilizer by a one step static polymerization method. The composition and structure of the PAN nanoflowers were analyzed by FTIR, XRD, SEM, TEM, and laser particle size analysis. The polymer particles consisted of a number of lamellae, with a sheet thickness of about 10 nm, and were similar to the shape of flowers with a particle diameter of about 350 nm. The mechanism of the polymerization reaction and the formation were studied. Moreover, the effects of monomer ratio, initiator concentration, reaction time, dispersion medium and co-monomer on the morphology and particle size of the nanoflowers were also discussed. A relatively large specific surface area was formed during the formation of the nanoflowers, which favored drug adsorption. The results of the in vitro experiments revealed that PAN(TBP) nanoflowers, containing BSA in buffer solution of pH 7.4, demonstrated good sustained-release and the cumulative release rate was about 83% after 260 h. The results also showed that the sustained-release from the PAN(TBP) nanoflowers best fitted the Riger-Peppas model. This study indicated that PAN(TBP) nanoflowers provided a theoretical base for the development of carriers for sustainable drug-release.

The schematic preparation of a new kind of pH-sensitive PAN nanoflower and its potential application for UC therapy. PAN (TBP) nanoflowers at pH 7.4 showed good sustained-release (t_83% = 260 h), which best fitted the Riger–Peppas model.

Perspectives of Molecularly Imprinted Polymer-Based Drug Delivery Systems in Cancer Therapy

Despite the considerable effort made in the past decades, multiple aspects of cancer management remain a challenge for the scientific community. The severe toxicity and poor bioavailability of conventional chemotherapeutics, and the multidrug resistance have turned the attention of researchers towards the quest of drug carriers engineered to offer an efficient, localized, temporized, and doze-controlled delivery of antitumor agents of proven clinical value. Molecular imprinting of chemotherapeutics is very appealing in the design of drug delivery systems since the specific and selective binding sites created within the polymeric matrix turn these complex structures into value-added carriers with tunable features, notably high loading capacity, and a good control of payload release. Our work aims to summarize the present state-of-the art of molecularly imprinted polymer-based drug delivery systems developed for anticancer therapy, with emphasis on the particularities of the chemotherapeutics’ release and with a critical assessment of the current challenges and future perspectives of these unique drug carriers.

Preparation of Dual-Template Epitope Imprinted Polymers for Targeted Fluorescence Imaging and Targeted Drug Delivery to Pancreatic Cancer BxPC-3 Cells

Molecularly imprinted polymers were commonly used for drug delivery. However, single-template molecularly imprinted polymers often fail to achieve both drug delivery and precise targeting. To address this issue, a dual-template molecularly imprinted polymer nanoparticle used for targeted diagnosis and drug delivery for pancreatic cancer BxPC-3 cells (FH-MIPNPs) was prepared. In the FH-MIPNPs, the 71-80 peptide of human fibroblast growth-factor-inducible 14 modified with glucose (Glu-FH) and bleomycin (BLM) were used as templates simultaneously, so that the FH-MIPNPs could load BLM and bind to the BxPC-3 cells, which overexpress human fibroblast growth-factor-inducible 14 (FN14). Targeted imaging experiments in vitro show that the FH-MIPNPs could specifically target BxPC-3 cells and that there is no targeting effect on cells without expression of FN14. In vivo antitumor experiment results demonstrated that the FH-MIPNP-loaded BLM (FH-MIPNPs/BLM) could inhibit the growth of xenografts tumor of BxPC-3 (tumor volume increased to 1.05×), which shows that FH-MIPNPs/BLM had obvious targeted therapeutic effect compared to the other three control groups of BLM, FH-NIPNPs/BLM, and physiological saline (tumor volume increased to 1.5×, 1.6×, and 2.4×, respectively). What is more, FH-MIPNPs have low biotoxicity through toxicity experiments in vitro and in vivo, which is favorable toward making molecularly imprinted polymers an effective platform for tumor-targeted imaging and therapy.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Chitosan-graft-poly(methyl methacrylate) amphiphilic nanoparticles: Self-association and physicochemical characterization

In this work, we synthesized and characterized the self-assembly behavior of a chitosan-poly(methyl methacrylate) graft copolymer and the properties of the formed nanoparticles by static and dynamic light scattering, small-angle neutron scattering, and transmission electron microscopy. Overall, our results indicate that the hydrophobization of the chitosan side-chain with PMMA leads to a complex array of small unimolecular and/or small-aggregation number "building blocks" that further self-assemble into larger amphiphilic nanoparticles.

Molecular Imprinting Prevents Environmental Contamination and Body Toxicity from Anticancer Drugs: An Update

Cancer has been responsible for high morbidity and mortality globally. The treatment of cancer is possible using different kinds of therapies using anticancer drugs if it is diagnosed at the right time. Nevertheless, their appropriate administration for maximum therapeutic effect and their elimination from the patient's body causing environmental problems are two big issues which could be successfully abated using molecular imprinted polymers (MIPs) owing to their unique features. In this review, we have compiled and discussed the works on the determination and controlled release of anticancer drugs based on MIPs. We also highlighted the current challenges and remedies, and the future direction of MIPs in this area.

Chitosan-Based Nanomaterials for Drug Delivery

This review discusses different forms of nanomaterials generated from chitosan and its derivatives for controlled drug delivery. Nanomaterials are drug carriers with multiple features, including target delivery triggered by environmental, pH, thermal responses, enhanced biocompatibility, and the ability to cross the blood-brain barrier. Chitosan (CS), a natural polysaccharide largely obtained from marine crustaceans, is a promising drug delivery vector for therapeutics and diagnostics, owing to its biocompatibility, biodegradability, low toxicity, and structural variability. This review describes various approaches to obtain novel CS derivatives, including their distinct advantages, as well as different forms of nanomaterials recently developed from CS. The advanced applications of CS-based nanomaterials are presented here in terms of their specific functions. Recent studies have proven that nanotechnology combined with CS and its derivatives could potentially circumvent obstacles in the transport of drugs thereby improving the drug efficacy. CS-based nanomaterials have been shown to be highly effective in targeted drug therapy.

The properties of fibreboard based on nanolignocelluloses/CaCO3/PMMA composite synthesized through mechano-chemical method

The purpose of this study was to develop a rapid and green method for the synthesis of lignocelluloses-based materials with superior mechanical properties. Samples were produced by hot-pressed method using different concentrations of CaCO₃ and poly (methyl methacrylate) particles-filled nanolignocelluloses composites which was synthesized through mechano-chemical method. Poly (methyl methacrylate) and CaCO₃ nanoparticles have been used as nanofillers. Bending strength, elasticity modulus, and dimensional stability, thermal properties of the developed lignocelluloses-based composites were determined. In view of the experimental results, it is found that the composites materials have good mechanical, dimensional stability, and thermal properties which enhanced as the filler loading increased. Thus, herein described lignocelluloses-based materials showed important characteristics to be concluded that these composites are suitable to be used for the design of flooring and construction systems.

Molecularly imprinted electrospun nanofibers for adsorption of 2,4-dinitrotoluene in water

2,4-Dinitrotoluene molecularly imprinted nanofibers fabricated by a simple electrospinning technique show higher adsorption capacity and possess remarkable stability and reusability.

Application Potential of Polymeric Nanoconstructs for Colon-Specific Drug Delivery

Numerous applications of colon-specific drug delivery have been found in a wide array of diseases like irritable bowel syndrome (IBS), inflammatory bowel diseases (ulcerative colitis and Crohn's disease), colorectal cancer, and diverticulitis. Drug delivery to the colon has different anatomic and pathophysiological barriers. In recent advancements, these barriers were overcome by using biodegradable polymeric nanoconstructs, which are exhibiting minimal systemic adverse effects. Various polymeric nanoconstructs (PNCs) such as nanoparticles, micelles, and dendrimers have been exploited for effective targeting to pathological sites of colon. PNCs on oral administration not only protect the bioactive from physicochemical degradation but also prevent premature leakage in the upper parts of gastrointestinal tract. The chapter summarizes various PNCs-based approaches for colon-specific drug delivery.

Europium Doped Calcium Deficient Hydroxyapatite as Theranostic Nanoplatforms: Effect of Structure and Aspect Ratio

We present the development of theranostic nanoplatforms (NPs) based on a europium (Eu³⁺) doped calcium deficient hydroxyapatite (CDHA) core functionalized with cyclodextrin (β-CD) and cucurbitural (CB[7]). The composition, crystalline structure, aspect ratio, surface area, morphology, and luminescence property of the NPs were investigated by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray analysis (EDAX), the Brunauer-Emmett-Teller (BET) method, transmission electron microscopy (TEM), and fluorescence spectroscopy. The perceivable effects of Eu³⁺ doping appear in the minor peak shift to larger angles attributed to lower crystallite size and smaller aspect ratios coupled with greater structural strain in the rod shaped theranostic NPs and a shift in their zeta potential toward less negative values. Cell parameter calculations suggest that the doping of Eu³⁺ would cause the a-axis parameter to decrease slightly as the ionic radius of Eu³⁺ is smaller than that of Ca²⁺. Moreover drug release profiles employing 5-fluorouracil (5FU) suggest that these luminescent NPs depict controlled and sustained release profiles. Further the emissive intensities of the NPs in the carrier systems increase with cumulative released amounts of 5FU, suggesting that release of the drug can be monitored by changes in luminescent intensity. In addition, native NPs manifest commendable cytocompatibility as demonstrated by MTT and live/dead protocols, whereas the 5FU loaded NPs demonstrated over 80% HeLa cell death, signifying their therapeutic potential. We envision that these NPs can serve as effective and practical multifunctional probes for theranostic applications.

Selective Removal of the Genotoxic Compound 2-Aminopyridine in Water using Molecularly Imprinted Polymers Based on Magnetic Chitosan and β-Cyclodextrin

To develop efficient materials with enhanced adsorption and selectivity for genotoxic 2-aminopyridine in water, based on magnetic chitosan (CTs) and β-cyclodextrin (β-CD), the magnetic molecularly imprinted polymers (MMIPs) of Fe₃O₄-CTs@MIP and Fe₃O₄-MAH-β-CD@MIP were synthesized by a molecular imprinting technique using 2-aminopyridine as a template. The selective adsorption experiments for 2-aminopyridine were performed by four analogues including pyridine, aniline, 2-amino-5-chloropyridine and phenylenediamine. Results showed the target 2-aminopyridine could be selectively adsorbed and quickly separated by the synthesized MMIPs in the presence of the above structural analogues. The coexisting ions including Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻ and SO₄²⁻ showed little effect on the adsorption of 2-aminopyridine. The maximum adsorption capacity of 2-aminopyridine on Fe₃O₄-CTs@MIP and Fe₃O₄-MAH-β-CD@MIP was 39.2 mg·g⁻¹ and 46.5 mg·g⁻¹, respectively, which is much higher than values in previous reports. The comparison result with commercial activated carbon showed the obtained MMIPs had higher adsorption ability and selectivity for 2-aminopyridine. In addition, the synthesized MMIPs exhibited excellent performance of regeneration, which was used at least five times with little adsorption capacity loss. Therefore, the synthesized MMIPs are potential effective materials in applications for selective removal and analysis of the genotoxic compound aminopyridine from environmental water.

Molecular Dynamics Simulation Study of the Selectivity of a Silica Polymer for Ibuprofen

In the past few years, the sol-gel polycondensation technique has been increasingly employed with great success as an alternative approach to the preparation of molecularly imprinted materials (MIMs). The main aim of this study was to study, through a series of molecular dynamics (MD) simulations, the selectivity of an imprinted silica xerogel towards a new template-the (±)-2-(P-Isobutylphenyl) propionic acid (Ibuprofen, IBU). We have previously demonstrated the affinity of this silica xerogel toward a similar molecule. In the present study, we simulated the imprinting process occurring in a sol-gel mixture using the Optimized Potentials for Liquid Simulations-All Atom (OPLS-AA) force field, in order to evaluate the selectivity of this xerogel for a template molecule. In addition, for the first time, we have developed and verified a new parameterisation for the Ibuprofen(®) based on the OPLS-AA framework. To evaluate the selectivity of the polymer, we have employed both the radial distribution functions, interaction energies and cluster analyses.

Preparation and characterization of temperature-memory nanoparticles of MIP-CS-g-PMMA

A molecular imprinted graft copolymer of chitosan with methyl methacrylate (MIP-CS-g-PMMA) was prepared by free radical polymerization with aspirin as the template molecule and ammonium persulfate as the initiator.

A mesoporous fluorescent sensor based on ZnO nanorods for the fluorescent detection and selective recognition of tetracycline

Schematic for preparation of the mesoporous MIPs-ZnO NRs and non-mesoporous MIPs-ZnO NRs.